Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹5.5 L
EMD Value
₹11,000
Closing Date
20 Jun 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Improving lighting and power system at Auditorium Hall and Entrance Lobby area of Old HMA
7260
FM/NE-P/Advt./27/23-24 Dt: 23.02.2024
Works
Electrical Planning and Contract Section-E and M Dept-FMD-Bangalore
₹0
₹11,000
20 Jun 2024
2 May 2024
2 May 2024
20 Jun 2024
HINDUSTAN AERONAUTICS LIMITED FACILITIES MANAGEMENT DIVISION
NAME OF THE WORK: " Improving lighting and power system at Auditorium Hall & Entrance Lobby area of Old HMA." Cont.No.HAL/FMD/ER-2920/23-24
Name of the Contractor :
BILL OF QUANTITIES WITH SPECIFICATIONS
Preamble: The tenderers are requested to read the following before quoting:
1 The payment terms shall be governed as per the terms indicated in special conditions of contract.
2 Basic Rate to be quoted for each item. Subject work is called on works contract basis and prevailing GST of 18% has been added in the BOQ on overall total. Any revision on this GST rate is to HAL account.
3 Successful offer that is L-1 (Lowest offer) will be determined including GST.
4 Amount towards GST will be paid along with RAR payment against invoice.
5 The tenderers are requested to abide by the rules of prevailing GST act.
6 This BOQ specification has to be read in conjunction with technical specifications and tender drawings. Any ambiguity in these have to be brought to the knowledge of contract section before submission of tender to avoid future claims/dispute.
Sl. No Specification of item Quantity Unit Rate in Figs excluding GST Rate excluding GST in words Amount Excluding GST in Figs (E=C*A)
1 Supply and fixing in flush with the false ceiling testing & commissioning of round type recess mounted LED downlighter with aluminium die-cast body, finish with premium white powder coating, wattage not less than 18W LED lighting fixture, lumens efficiency ≥ 100lm/w at luminaire level, Colour temperature shall be ≥6500K, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V. LM79 certification for luminare & LM80 certificate for LED shall be produced. including control gear, power factor of control gear shall be >0.90. of :Bajaj BGSLO Sleek Recess RD 18W WH LED /Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL and as directed by Engineer-in-charge. 52 Nos 0.00
2 Supply and fixing in flush with the false ceiling testing & commissioning of round type recess mounted 9W LED downlight light with aluminium die-cast body, finish with premium white powder coating, wattage not less than 9 W LED lighting fixture, lumens efficiency ≥ 100lm/w at luminaire level, Colour temperature shall be ≥6500K, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V. LM79 certification for luminare & LM80 certificate for LED shall be produced. including control gear, power factor of control gear shall be >0.90. of :Bajaj BSDLR 9W LED WH /Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL and as directed by Engineer-in-charge. 32 Nos 0.00
3 Supply, fixing directly to the ceiling/wall/Floor using suitable mounting arrangements testing & commissioning of 28W, 2400 Lumens for 5 meter with suitable 1no driver for each 5mtrs length of LED strip having reliable performance and anti-dust LED strips with professional design for Decorative lighting applications(Cove lighting) and Colour temperature shall be =>3000K, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections between driver and lighting fixtures complete in all respect and as directed by EIC. The lighting fixture shall be model no: Philips Linea Cove light or Equivalent make in other approved makes. 260 Mtrs 0.00 351
4 Supply, fixing using suitable mounting accessories testing & commissioning of 28 W driver 220V-240V Power supply with all accessories complete in all respect and as directed by EIC. The Driver shall be of Philips or Equivalent make in other approved makes. Extra Driver is used for Philips Linea Bright Premium Cove light at BOQ sl no-3 as per site requirement. 10 Nos 0.00
5 Supply, fixing, testing & commissioning of LED flood lighting fixture of wattage not exceeding 150watts, lumen output not less than 16500/18000 lumens made out of die cast aluminium housing, optical cover made out of heat resistance toughened clear glass, including control gear and mounting arrangement. The lumens efficacy >110/120 lm/watt. The Colour temperature of the fitting shall be >5600K operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V with power factor of driver unit>0.9. IP66 protection, LM79 certification for luminares & LM80 certificate for LED shall be produced. Necessary hardwares required has to be supplied with the fitting and other standard accessories complete in all respects and as directed by Engineer in charge. Make/model: BAJAJ GLEAM F 165L WH SY PC SD V2/Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL. 6 Nos 0.00
6 Lighting Point wiring
Wiring for light point / fan point / exhaust fan point/call bell point from nearest switch box in concealed/open wiring system as per site requirement (Refer Electrical tender drawing enclosed) using medium class PVC conduit with necessary junction boxes, bends, reducers, collars, end caps etc., and wiring with 3 runs of 1.5sqmm FRLS copper conductor stranded PVC insulated 1100V gr. wire with ISI mark (One as earth conductor) including suitable size modular type GI concealed/PVC open box as per site requirement with base plate, glossy finish front plate, angle holder with base etc., for housing switches, sockets, fan regulator etc. including supply of modular type switches, socket outlets, fan regulators etc., with necessary interconnections, chipping the wall & replastering to smooth finish by using chicken wire mesh wherever necessary complete in all respects as detailed below:(Note: The new switch boards proposed for lighting control have to be provided adjecent to existing switch boards. The location of same will be finalized during execution of work. Hence, scope of work includes tapping of power to new switch board from existing switch board using 3R X1.5sqmm copper wire complete in all respect and as directed by OIC/EIC)
a) Wiring to single light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects. 10 Pts 0.00
b) Wiring to two light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects. 6 Pts 0.00
c) Wiring to three light point controlled by 1 No 6A, 250V gr. flush modular type SP switch complete in all respects. 8 Pts 0.00
d) Wiring to four light point controlled by 1 No 6A, 250V gr. flush modular type SP switch complete in all respects. 10 Pts 0.00
7 Wiring-Lighting circuits/submain circuits from existing PDB/LT panel to proposed new LDB's
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
a) Wiring for circuit / submain wiring along with earth wire with 2 X 6 sq. mm + 1 X 6 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required(Wiring from existing panel to Distribution board as per site requirement) 20 Mtrs 0.00
8 Power Points wiring
Wiring for power point as detailed below with 3R x 4 sq.mm FRLSH PVC insulated copper conductor multi strand, single core wire/cable in recessed medium class 25mm dia PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with all accessories including chase cuttign the wall and repalstering as per actual requirement complete in all respect and as required.
a) 6A Independent socket point 10 Pts 0.00
b) 6/16A Power socket point 10 Pts 0.00
9 Distribution Board
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.
i) 4Way TPN MCB DB 1 Nos 0.00
ii) 40A FP MCB (I/C) 1 Nos 0.00
iii) 6 to 32A SP MCB (O/G) 10 Nos 0.00
10 Disconnecting/dismantling & removal of existing old light fittings (60 nos approx.) including wiring as-is-basis without any damage and handing over the same to the place as shown by Engineer-in-charge (not more than 2KM) including loading, transportation, unloading etc., complete in all respects The scope also includes disconnecting the existing cables/wire from light fixtures, complete in all respects and as directed by the engineer-in-charge. 1 lot 0.00
Total Amount Excluding GST 0.00
Add 18% GST 0.00
Total Amount Including GST 0.00
Total Amount inclusive of GST In Words
HINDUSTAN AERONAUTICS LIMITED
Facilities Management Division
Pre-Qualification Profile (To Be uploaded along with Part A)
Tender Ref No. or Contract No.: HAL/FMD/ER-2920/23-24
Name of Work: Improving lighting and power system at Auditorium Hall & Entrance Lobby area of Old HMA.
Estimated Amount in Rs.: 550000
Tender Notice Date: [DD/MM/YYYY] 02-23-24
Sl.No Description Details Enclosed / Not Enclosed Remarks
1 Name of the Individual / Firm / Company: * Mandatory Please Enter Name of the Individual /firm /company
2 Type of ownership PleaseEnter Type of Ownership
If Other, please specify
3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc., Please enter Details of Constitution
4 Address for correspondence: Please Enter Address
5 Bank(s) details: [Copy of the cheque leaf to be uploaded]
Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Cancelled cheque leaf to be uploaded)
Name of the Bank
Type of Account
6 PAN No.: Please Enter Pan NO
7 Average annual financial turn over during the last 3 years, ending 31st March of the previous financial year [ should not be less than 30% of Amount put to tender] 4999999 3
YEAR TURN OVER IN Rs: Enclosed / Not Enclosed REMARKS 5000000 2
2022 – 2023 Rs: Please Enter Turn over in Rupees for all the 3 years 7499999 2
Average annual Financial turn over 0.00 165000.00
Avg Annual Turnover criteria is not met 10000000 1
8 Details of Registered Contractor
If Registered Contractor with HAL Yes/ No [for Similar nature of work] Documentary proof to be Uploaded to e-Procurement Portal * Category: E = 75.00 Lakhs upto ` 100 Lakhs F = 50.00 Lakhs upto ` 75 Lakhs G = 25.00 Lakhs upto ` 50 Lakhs H =10.00 Lakhs upto ` 25 Lakhs I = 5.00 Lakhs upto ` 10 Lakhs J = 2.00 Lakhs upto ` 5 Lakhs K = Below ` 2 Lakhs 0 7 E 1
Registration No. 199999 7 F 2
Category 200000 6 G 3
PEMD Amount ( If paid ) 499999 6 H 4
9 PF No.: Please Enter PF NO
10 ESI No.: Please Enter ESI NO
Location of Agency/organisation: Please Enter GST Details
Any Special Status of the Unit i.e. DTA, EOU, SEZ, FTWZ
Service Accounting Code (SAC) #N/A #REF!
Registered under regular scheme or Composition Scheme or Not Registered Related Document to be uploaded in ePortal
12 Contact details
Contact person name Please Enter Contact person Name
Mobile No. Please Enter Mobile No
Ph. No. with STD code
FAX No. with STD code #N/A #REF!
13 Valid Electrical contractor licence of appropriate voltage issued by any state Govt. under clause 45 of Indian Electricity Rules 1956 and as amended from time to time or to declare engage an electrical contractor who has the above mentioned licence and requisite experience. Please SELECT YES OR NO
14 I.T Returns for past 03 years 999999 5 J 6
Assessment year 2023-24 Please Select 'Yes' ' No' for IT Return for All Three years 1000000 4 K 7
Assessment year 2022-23 2499999 4
Assessment year 2021-22 2500000 3
15 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued within a period 12 months from the final date of submission of tender. solvency cal
Name of Bank & Branch: Please Enter Details to 'Name of the Bank' , 'Date of Issue','Value in C89``Rs. in Lakhs 02-23-24 28-Jun 0 40000
Date of Issue[MM/DD/YYYY]: 200000 40000
Value of Rs. In Rupees: 200001 150000
Solvency value is NOT as per NIT
16 Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated amount put to tender. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated amount put to tender. (iii) ONE similar completed work costing not less than the amount equal to 80% of the estimated amount put to tender. 220000 500001 250000
Completed similar works during last 7 years Please Select %of similar works completed during last 7 years 1000000 250000
Work No I Type of Work: [Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000
Brief Description of Work: 2000000 500000
Completed value of Work in Rs. Lakhs: 2000001 1000000
Date of Commencement of Work [DD/MM/YYYY] 4000000 1000000
Date of Actual Completion of Work[DD/MM/YYYY]: 4000001 2000000
Work No II Type of Work: [Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000
Brief Description of Work: Please Enter Details for Work No II
Completed value of Work in Rs. Lakhs:
Date of Commencement of Work[DD/MM/YYYY]:
Date of Actual Completion of Work[DD/MM/YYYY]: work done
Work No III Type of Work: [Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 02-23-24 2555
Brief Description of Work: Please Enter Details for Work No III 02-24-17
Completed value of Work in Rs. Lakhs:
Date of Commencement of Work[DD/MM/YYYY]:
Date of Actual Completion of Work[DD/MM/YYYY]:
17 Details of person holding the power of Attorney :
Name Related Document to be Uploaded to eProcurement Portal
Mobile No. Please Enter Details for Person holding Power of Attorney
Ph. No. with STD code
FAX No. with STD code
18 DECLARATION I
The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under Pre-qualification criteria, technical bid ( Page 1 to 169) and price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and award of work. Please Accept the Declaration I
19 DECLARATION II
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I//We are aware that document sought only be uploaded for evaluation of offer. 5.I/We shall not associate nor has been associated in the past, directly or indirectly with consultant or any other entity that would prepare the design, specification and other documents of the project. Please Accept the Declaration II
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
Technical_Bid_ER2920.pdf
TENDER_DOCUMENT • 1.82 MB
Tender_Drawing_2.pdf
TENDER_DOCUMENT • 0.31 MB
PQ_FreeView.pdf
TENDER_DOCUMENT • 0.04 MB
PB_FreeView.pdf
TENDER_DOCUMENT • 0.09 MB
Amendment_to_Tender_Notice.pdf
TENDER_DOCUMENT • 0.24 MB
Corrigendum_No_1.pdf
TENDER_DOCUMENT • 0.03 MB
Tender_notice_ER2920.pdf
TENDER_DOCUMENT • 0.14 MB
Tender_Drawing_1.pdf
TENDER_DOCUMENT • 0.21 MB
Price_Bid_ER2920.xlsm
TENDER_DOCUMENT • 0.04 MB
Pre_Qualification.xlsm
TENDER_DOCUMENT • 0.03 MB
undertaking_Letter_2920.pdf
TENDER_DOCUMENT • 0.02 MB
ECS_Format.pdf
TENDER_DOCUMENT • 0.01 MB
Check_List_ER2920.pdf
TENDER_DOCUMENT • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .