Maintenance to Gymnasium Equipment at DRDO Campus of DGRE, Manali and Children Play Equipme including Garden Furniture at DRDO Residential Estates and Open Gym at OTF at Ramgarh

Amount

Play Equiptments at Ramgarh

Multi Action Play Station: Multi action play system with 2 steps platform of size 36" x 36". Step one 36" high from ground level and Step two is 42" high from ground level with 4 steps to reach platform no. 1. 25mm outer dia steel tube as outer support and 18mm outer dia tube with inner support. 6' long fibre slide on one side. Round step climber made of 18mm outer dia. Both platforms mounted on 75mm outer dia MS tube on second side, and with 4 Nos. 18mm outer dia tubes. Checkered plates of size 36" x 36" fitted on both the platforms. Primed and coated with 1st quality paint.

Garden Bench: Material, Labour & fixing of all weather benches with anticorrosive paint of 1500 mm (5 feet) long welded/bolted at appropriate places using Tee/ angles and flat iron and GI pipe 20 mm medium class. The fixing shall be in cement concrete 1:2:4.

Swing- Double: Material labour & fixing of Swing Double of size 2400 mm x 2100 mm with M.S pipe 50 mm medium class, M.S angle 32 mm x 3 mm and M.S chain 6 mm. The fixing shall be in cement concrete 1:2:4, with provision of same area 17.50 Sqm & 0.30 mt depth to be filled with sand to protect children from injury.

Single Slider: Length of slide 6ft made of fibre, Height of ladder 6ft. Total no of steps 6 made of MS pipe slide assembled with ladder. Primed and coated with 1st quality paint

Spiral Slider: Total height of spiral slide 9ft in semi-circular form with 3 Nos. half turn mounted on central pole connected with ladder with total height 10’ and no. of steps 12 and width of platform 18” and length 24”.Primed and coated with 1st quality paint.

Sea-Saw ( Double): Material labour & fixing of see saw 2 setter size 2400 mm long with M.S pipe 50 mm medium class, M.S angle 40x40x5 with proper arrangement for sitting. The fixing shall be in cement concrete 1:2:4, with provision of sam area 17.50 Sqm & 0.30 mt depth to be filled with sand to protect children from injury.

Square Grid / Jungle Gym :- Material labour & fixing of Jungle jim made up of MS pipe including fabrication, of size 2400x2100 mm with M.S pipe 32 dia and pipe 25 mm medium class. The fixing shall be in cement concrete 1:2:4, with provision of sam area 17.50 Sqm & 0.30 mt depth to be filled with sand to protect children from injury.

Cardiovascular Equipments

Motorised Treadmill (Imported), Motor Type: AC Motor, HP:3, Motor Make: OTIS/LG peak Machine Weight: 200kg. Belt Size 20”X52”, Led mater Disp: Time, speed, distance, calorie, hand held pulse, User weight Cap: 300kg, Speed 0-25km/hr, running time: 24hrs, invertor running the treadmill: Fuji(Japan)

Cross Trainer (Imported) (Semi Comm) Ever Brite, Electro magnetic, self-powered meter, no Battery.

Upright Bike Heavy Duty(Light Comm) KD-9U 45kg heavy duty bike, Flywheel Mechanism

Strength Equipment's

4 Station Multi Gym Light commercial(Imported) 04 users can exercise at one time having individual weight stacks. Fully covered weight plates stack for protection against accidental injury. A) Seated leg press for leg B) Seated lat pull down for back C) Seated chest press, Seated rowing for back, seated leg extension for lower legs, standing leg curl for hamstring lower pulley for Biceps. D) Biceps/Triceps Pulley

Benches & Misc Units

Adjustable Bench for Benchpress

Free weight Rubberised (Imported)

Dumbel Rods

Roads 7ft, 5ft,4ft (2 Each)

4 KVA Voltage stabilizer for Machine Logictar/Blue Bird

Open Gym at OTF Ramgarh

SHOULDER WHEEL: 1) P/F of Shoulder Wheel complete in all respects having following specifications. a) All pipes should use in the equipments should be galvanised with 3.75mm thickness. b) Multi Colour Powder coating with polyester paints should be used on all the equipments. c) The each wheel of shoulder wheel must have dia of minimum 20 inch. d) The high end bearings such as SKF/NBC must be used in all the equipments. 2) Dimensions- 1800*850*1150mm 3) Size of main tube-125mm Nominal Bore GI Pipe or steel tube 4) Size of supporting tube-50*3.75mm steel tube 5) Size of Handle Pipe should be 32mm with 3.75mm thickness 6) Radius of edge where bearing is fitted should be 58mm with thickness of 3.75mm. 7) The wheels of shoulder wheel must have dia of 20 inch. 8) Al alloy/hardened plastic LDPE protecting covers should be used at the top of the main tubes to protect from the rainwater and there must be damping materials inside the rotating parts. 9) The distance between two spinners is no less than 230mm, avoiding the damage of being stuck 10) Anti-theft cover is made by hard plastic 11) The diameter of rotating shaft is not less than 58mm with 3.75mm thickness 12) Colour- customizable multi-colour and complete powder coat

LEG PRESS/LEG SHAPER 1) P/F of LEG SHAPER complete in all respects having following specifications. a) All pipes should use in the equipments should be galvanised with 3.75 mm thickness. b) Multi Colour Powder coating with polyester paints should be used on all the equipments. c) The foot pedal on all the equipments should be of aluminium/high quality plastic only. d) The seats should be made of high quality plastic with colour scheme in yellow or orange. e) The high end bearings such as SKF/NBC must be used in all the equipments. 2) Dimensions- 2000*740*1670mm 3)Colour- customizable multi-colour and complete powder coat 4) Size of main tube-150 mm Nominal Bore GI Pipe 5) Size of supporting tube-50*3.75mm steel pipe 6) Size of Handle Pipe should be 33mm with 3.75mm thickness 7) Alloy/hardened LDPE Plastic protecting covers should be used at the top of the main tubes to protect from rainwater 8) Anti-skid components are used at the pedal parts. 9) Anti-theft cover is made by stainless steel/high quality plastic. 10) Thickness of bearing bracket is no less than 8mm 11) Hazardous materials like coating agent, rubber are under national newest standard. 12) Maximum User Weight 120 Kg

SINGLE SKIER 1) P/F of SINGLE SKIER complete in all respects having following specifications. a) All pipes should use in the equipments should be galvanised with 3.75mm thickness. b) Multi Colour Powder coating with polyester paints should be used on all the equipments. c) The foot pedal on all the equipments should be of aluminium only. d) The seats should be made of high-quality plastic with colour scheme in yellow or orange. e) The high-end bearings such as SKF/NBC must be used in all the equipments. 2) Dimensions- 2000*590*1550mm 3) Colour- customizable multi-colour and complete powder coat 4) Size of main tube-125 mm nominal bore GI Pipe 5) Size of supporting tube-50*3.75mm steel pipe 6) The size of the handle pipe should be 33mm with 3.75mm thickness 7) The diameter of rotating shaft is not less than 58mm with 3.75mm thickness 8) Maximum user weight – 100 Kg

CROSS WALKER a) All pipes should use in the equipments should be galvanised with 3.75mm thickness. b) Size of main tube-150 mm Nominal Bore GI Pipe c) Size of supporting tube-50*3.75mm steel pipe d) Size of the rotating shaft should have dia of 58mm with 3.75mm thickness e)The size of the handle pipe should be 33mm with 3.75mm thickness f) Multi Colour Powder coating with polyester paints should be used on all the equipments. g) The foot pedal on all the equipments should be of aluminium/high quality LDPE plastic only. h)The high end bearings such as SKF/NBC must be used in all the equipments. i) Maximum user weight – 100 Kg

THE HORSE 1) P/F of THE HORSE complete in all respects having following specifications. a) All pipes should used in the equipments should be galvanised with 3.75mm thickness. b) Size of main tube-140*3.75mm steel pipe c) Size of supporting tube-50*3.75mm steel pipe d) The size of the handle pipe should be 33mm with 3.75mm thickness e) Multi Colour Powder coating with polyester paints should be used on all the equipments. f) The rotating shaft for bearing must have dia 58mm with wall thickness of 3.75mm only. g) The seats should be made of high quality plastic with colour scheme in yellow or orange. h) The high end bearings such as SKF/NBC must be used in all the equipments. a) Maximum user weight – 100 Kg

BACK SHAPER a) All pipes should use in the equipments should be galvanised with 3.75mm thickness. b) Size of main tube-150*3.75mm steel pipe c) Size of supporting tube-50*3.75mm steel pipe d) The size of the handle pipe should be 33mm with 3.75mm thickness e) The rotating shaft for bearing must have dia 58mm with wall thickness of 3.75mm only. f) The seats should be made of high quality plastic with colour scheme in yellow or orange. g) The foot pedal on all the equipments should be of aluminium/hard plastic LDPE only. h) The high end bearings such as SKF/NBC must be used in all the equipments.

EXERCISE BARS a) All pipes should use in the equipments should be galvanised with 3.75mm thickness. b) Size of main tube-140*3.75mm steel pipe c) Size of supporting tube-50*3.75mm steel pipe d) Multi Colour Powder coating with polyester paints should be used on all the equipments.

WAB BOARD / ABBS SHAPER 1) P/F of WAB BOARD/ABBS SHAPER complete in all respects having following specifications. a) All pipes should use in the equipments should be galvanised with 3.75mm thickness. b) Size of main tube-140*3.75mm steel pipe c) Size of supporting tube-50*3.75mm steel pipe d) The size of the handle pipe should be 33mm with 3.75mm thickness e) The rotating shaft for bearing must have dia 58mm with wall thickness of 3.75mm only. f) The seats should be made of high quality plastic with colour scheme in yellow or orange. g) The high end bearings such as SKF/NBC must be used in all the equipments. h) Multi Colour Polyester Powder coating should be done on equipments.

PUSH CHAIR (Double) 1) P/F of PUSH AND PULL CHAIR complete in all respects having following specifications. a) All pipes should use in the equipments should be galvanised with 3.75mm thickness. b) Multi Colour Powder coating with polyester paints should be used on all the equipments. c) The foot pedal on all the equipments should be of aluminium only. d) The seats should be made of high quality plastic with colour scheme in yellow or orange. e) The high end bearings such as SKF/NBC must be used in all the equipments. 2) Dimensions- 2000*715*2200mm 3) Colour- customizable multi-colour and complete powder coat 4) Size of main tube-140*3.75mm steel pipe 5) Size of supporting tube-50*3.75mm steel pipe 6) The size of the handle pipe should be 33mm with 3.75mm thickness 7) Hazardous materials like coating agent, rubber are under national newest standard. 8) Anti-theft cover is made by stainless steel/hard plastic 9) The diameter of rotating shaft is not less than 58mm with 3.75mm thickness 10) Maximum user Weight 120 Kg

PULL CHAIR (Double) 1) P/F of PUSH AND PULL CHAIR complete in all respects having following specifications. a) All pipes should use in the equipments should be galvanised with 3.75mm thickness. b) Multi Colour Powder coating with polyester paints should be used on all the equipments. c) The foot pedal on all the equipments should be of aluminium only. d) The seats should be made of high-quality plastic with colour scheme in yellow or orange. e) The high-end bearings such as SKF/NBC must be used in all the equipments. 2) Dimensions- 1950*750*2150mm 3) Colour- customizable multi-colour and complete powder coat 4) Size of main tube-140*3.75mm steel pipe 5) Size of supporting tube-50*3.75mm steel pipe 6) The size of the handle pipe should be 33mm with 3.75mm thickness 7) Hazardous materials like coating agent, rubber are under national newest standard. 8) Anti-theft cover is made by stainless steel/hard plastic 9) The diameter of rotating shaft is not less than 58mm with 3.75mm thickness. 10) Maximum user Weight 120 Kg

AIR SWING 1) P/F of AIR SWING OR WAIST SHAPER complete in all respects having following specifications. a) All pipes should use in the equipments should be galvanised with 3.75mm thickness. b) Size of main tube-140*3.75mm steel pipe c) Size of supporting tube-50*3.75mm steel pipe d) The size of the handle pipe should be 33mm with 3.75mm thickness e) Multi Colour Powder coating with polyester paints should be used on all the equipments. f) The rotating shaft for bearing must have dia 58mm with wall thickness of 3.75mm only. g) The seats should be made of high quality plastic with colour scheme in yellow or orange. h) The high end bearings such as SKF/NBC must be used in all the equipments. i) The foot pedal on all the equipments should be of aluminium/LPDPE plastic only.

M/s Goodwill Engineers