ADDN/ALTN TO PI STAFF MESS AND COMPOUND WALL, TOILETS IN NCC OFFRS MESS, MANOJ PANDEY HALL AND TOILET AT NCC DTE AND REPLACEMENT OF FLOORING AT KV LUCKNOW CANTT UNDER GE WEST LUCKNOW

Amount

Demolition of brick work or stone/ boulder masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles etc. complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling barbed wire of any type or size complete all as specified and directed. Note :- Each line of wire to be measured

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking down cement or cement lime plaster any description from walls/ceiling etc including racking out joints, hacking for key & scrubbing down with water all as specified and directed.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed.

Surface dressing not exceeding 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

Returning, filling in, trenches including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft/ loose soil complete all as specified and directed.

Removing surplus excavated material soils n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M & L for earth filling under floors or pavings laid in layers not exc 15cm thick, spread levelled and rammed including watering complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L brick work with old size fly ash bricks of class designation 75, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L brick work with old size fly ash bricks of class designation 75, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for brick work with old size fly ash bricks of class designation 75, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Cutting out bricks, forming toothing for and bonding new into old work including value of new materials entering old walls in cement mortar 1 : 6 and jointing and pointing (measured on vertical surface in contact eith old wall only) complete all as specified and directed.

Cutting hole in brick walls built in cement mortar or cement lime mortar to a depth measured from the face of jamb exceeding half brick but not exceeding one brick and making good dismantled portion in cement mortar 1 :3 or cement concrete 1:2;4 type B1 as required complete all as specified and directed.

M& L for filleting in any position and to any shape exc 25 but not exc 50 Sqcm in cement mortar 1:3 inlcuding all mitres, stops etc. complete all as specified and directed.

M&L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other bands, plinth courses, string cources, lacing cources, parapets and railing upto 60cm in hight, copings, kneelers, apex stones, bed plates, water troughs, hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves etc and similar works set in cement mortar 1:4 including demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

M&L Mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, coloumns and stanchions and similar works for rough finished surfaces complete all as specified and directed

M&L mild steel framed work such as posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting and/or welding etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed. NOTE: Each line wire to be measured.

S & F steel tubular sections Fe-290 (Gde E-165) as in beam, rafters, purlins and running rails and guide for sliding doors fixed with ms cleats or other connecting plates including cutting, grinding, weding etc as required complete all as specified and directed.

S&F multi-rib TM profile, tensile strength 550 Mpa, colour coated 0.50mm thick pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet, having maximum pitch of 250mm c/c and minimum 30mm crest depth in length as per site requirement, the feed material manufactured out of 0.50mm (TCT) with coating of 18-20 microns top coat over 5 microns primer and 8-10mm alkaline back of zinc aluminium alloy of AZ-150, including the sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium 55% and silicon 1.5% with total mass coating of 150 gms/sqm on both sides having covered width 1020mm and return leg for proper side lap as in roof covering/ cladding and fixed with self tapping screws with EDPM seal complete all as specified and directed.

S & F in repairs Gypsum board 600x600x12mm thick (Texture finish), white prelaminated set embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges powder coated white. The frame shall comprise of main runner made out of 0.33mm thick GS sheet of size 24x32x300mm and spaced at 1200mm c/c. Hangers of GI wire 4mm dia to be fixed by approved rawl plug screw etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross Tee(with double stiching ) to be interlocked between main runners at 600mm C/C to form 600x600mm module cross Tee. Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19mmx19mm and 300mm long of white powder coated colour all as per manufacturer's instructions complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n. exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.50 Sqm but n. exc 4sqm each complete all as specified and directed.

Taking down shutters of any description area exc 1 Sqm but n. exc 2 sqm each and refixing in same opeing after resizing and easing complete all as specified and directed.

S&F factory made Solid PVC door frame of size 60mmx30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.)

S&F factory made solid panel PVC door shutter 24mm thick made from co-extruded three layer rigid foam sheet (Single extruded) with 0.8 to 1mm thick decorative laminates both sides having density not less than 1400Kg/Cum and density of central core not less than 600 Kg/Cum manufactured by ann ISO 9001-2015 certified co. as per specification & drawing complete all as specified and directed.

S&F Anodised Aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for foxong etc. complete as specified and fixed including one shop coat of primer complete all as specified and directed.

S&F anodized aluminium glazed door shutters, using aluminium section 100x44x1.5mm thick with side hung door shutters using 1.50mm thick standard aluminium section having size of style, top rail, lock rail as 83x44x1.5mm thick whereas bottom rail shall be made up of 100x44x1.5mm thick including 5mm thick plain sheet glass panels and jointing cleats, glazing clips, rubber neoprene packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as 03 nos 100mm long aluminium hinges B-21 type, 01 no 200mm long aluminium tower bolt, 02 no 150mm long aluminium handle fabricated type and one hydraulic door closer in each shutter complete all as specified and directed.

S&F anodized aluminium glazed window shutters, top hung type, using 1.50mm thick aluminium section having frame of size 65x38x1.25mm, including necessary jointing cleats, glazing clips, rubber neoprene packing, anodized aluminium snap beading screws, anodized aluminium fittings such as 02 nos 100mm long aluminium hinges B-21 type, 01 no 100mm long aluminium tower bolt, 01 no aluminium handle in each shutter complete all as specified and directed.

S&F anodized aluminium gauzed window shutters, top hung type, using 1.50mm thick aluminium section having frame of size 65x38x1.25mm, including stainless steel wire cloth 0.36mm dia of wire and average width of aperture 1.4mm, fixed with screws, with necessary jointing cleats, glazing clips, rubber neoprene packing, anodized aluminium snap beading screws, anodized aluminium fittings such as 02 nos 100mm long aluminium hinges B-21 type, 01 no 100mm long aluminium tower bolt, 01 no aluminium handle in each shutter complete all as specified and directed.

S&F anodized aluminium window and ventilator shutters, fixed type, using 1.50mm thick aluminium section having frame of size 65x38x1.25mm, including 4mm thick pin headed/tinted glass fixed with screws, with necessary jointing cleats, glazing clips, rubber neoprene packing, anodized aluminium snap beading screws, complete all as specified and directed.

S&F 100mm size aluminium butt hinges, medium weight and fixed with screws complete all as specified and directed.

S&F 150mm size extruded aluminum alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F in repairs 100mm size mild steel, bright finished butt hinges, medium weight and fixed with screws complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 with integral water proofing compound @ 3% by weight of cement on fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed. NOTE: WPC shall be measured and paid seperately under respective item.

M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick work or concrete surfaces of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 on ceiling finished surface even and smooth without using extra cement complete all as specified and directed.

Supply only integral waterproofing compound complete all as specified and directed.

M&L for two coats of cement base paint over one coat of primer on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for one coat of cement base paint on old previously treated surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for two coats of oil bound distemper on wall over one coat of primer and 1mm thick layer of wall care putty including preparation of surfaces complete all as specified and directed.

M&L for two coats of oil bound distemper on old surface of ceiling including preparation of surfaces complete all as specified and directed.

M&L for two coats of oil bound distemper on wall over one coat of primer including preparation of new plastered surfaces complete all as specified and directed.

M&L for one coat of oil bound distemper on old surface of walls including preparation of surfaces complete all as specified and directed.

M&L for two coats of white wash on old plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for three coats of white wash on new plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old or previously treated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old or previously treated surfaces of wood or wood based materials of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

M & L for preparation of surface of concrete/plastered surface and applying a coat of Tapecrete P-151/Cemcrete acrylic polymer modified cementitious slurry consisting of one part of TAPECRETE P151, two part of cement by weight complete all as specified and directed

M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection, laid in panels, finished surface even and smooth without using extra cement and forming 12mm wide expansion joints to the full depth, and filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A' complete all as specified and directed.

M&L 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub bases of floors and pavings etc. finished even and fair without using extra cement complete all as specified and directed.

M & L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3,complete all as specified and directed.

M&L Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

M&L for joint free non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for joint free glazed ceramic tiles, coloured, superior quality of size 350x250x7mm/ 450x350x7mm thick, in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M & L for 60mm thick coloured machine pressed precast intelocking paver block of any shape and size conforming to IS 15658-2006, M40 grade with grey cement and pigment complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10 mm thick(square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10 mm thick(square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including rendering of mortar 10 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L 18-20 mm thick Kota stone slab, machine cut and polished as in flooring, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of stone, laid over and including 15mm thick screed bed in cement mortar 1:6, including rubbing, grinding and mirror polishing complete all as specified and directed.

M&L 20-25 mm thick Kota stone slab, machine cut and polished as in flooring, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of stone, laid over and including 20mm thick screed bed in cement mortar 1:4, including rubbing, grinding and mirror polishing complete all as specified and directed.

M&L 15-18 mm thick Kota stone slab, machine cut and polished as in risers of steps, skirting, dado and pillar, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of stone, laid over and including 10mm thick rendering in cement mortar 1:4, including rubbing, grinding and mirror polishing complete all as specified and directed.

M&L 18-20 mm thick Kota stone slab, machine cut and polished as in risers of steps, skirting, dado and pillar, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of stone, laid over and including 10mm thick rendering in cement mortar 1:4, including rubbing, grinding and mirror polishing complete all as specified and directed.

M&L 18-20 mm thick granite stone slab, machine cut and polished as in partition to urinals including rubbing, grinding on borh sides and including making round moulding to exposed edges complete all as specified and directed.

Taking up or down 15mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

Taking up or down 20mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

M & L Cutting chases, pinning in, for concealed water tubing etc. in brick walls and making good to disturbed surface in cement mortar 1:3, cutting not exceeding 10cm in girth complete all as specified and directed.

S&F 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floors complete all as specified and directed.

S&F 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floors complete all as specified and directed.

Taking down eaves gutters rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc. including cleaning for refixing or removal from site (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls with PVC clamp complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls with PVC clamp complete all as specified and directed.

S&F PVC (SWR) bends of any radius, suitable for 110mm bore PVC pipes, fixed and jointed with solvent complete all as specified and directed.

S&F PVC (SWR) bends of any radius, suitable for 75 mm bore PVC pipes, fixed and jointed with solvent complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single T), equal suitable for 110mm bore PVC pipes, fixed and jointed with solvent complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap, plain with gratings including jointing with solvent cement, suitable for 75mm bore PVC pipes complete all as specified and directed.

S&F in repairs PVC grating doom 100mm dia with waste hole complete all as specified and directed.

S&F vitreous china Wash basin, white, flat back type of size 550x400mm including CP waste coupling and 32mm dia waste pipe and fixing of 02 nos brackets made out of 40x40x5mm MS angle iron etc. complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan, pedestal pattern, white, with 'P' or 'S' trap, excluding flushing cistern and flush pipe, including connection to drain pipe (or outgoing pipe) and to flushing pipe etc. and making good to floor complete all as specified and directed.

S&F plastic water closet seat cover, white, closed pattern with flat bottom and cover, fixed with MS chromium plated or aluminium hinging device ISI marked as approved complete all as specified and directed.

S&F Vitreous China squatting pan, 'Orissa pattern', size 580x440mm, white, with integral foot rests including PVC 'P' or 'S' trap, excluding flushing cistern and flush pipe, including connection to trap and flushing pipe etc. and making good to floor complete all as specified and directed.

S&F vitreous china urinal, bowl type, flat back of size 465x355x265mm white, with grating and union for discharge pipe, including S & F automatic flushing cistern and flush pipe, waste pipe, providing and fixing plugs, bedding urinal against wall etc. complete all as specified and directed.

S&F central hole basin mixer, quarter turn, fancy type, brass chromium plated, with round spout with popup waste system, including plugging and fixed, suitable for 15mm bore pipe complete all as specified and directed. Make: Jaquar Essco cat no. TQT516A or Hindware cat no. F280009CP.

S&F bib taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and directed.

S&F pillar taps 15mm bore, half/quarter turn, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F PVC valveless, syphonic action type, low level, flushing cistern of 10 lit capacity, white, with inlet, ball valve, float valve and handle including bracket, rubber cone and flush pipe etc. and connection to pipes complete all as specified and directed.

S&F in repairs angle valves 15mm bore, fancy type, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs CP brass soap dish , fancy type, as per sample approved complete all as specified and directed.

S&F in repairs hand shower (health faucet), superior quality, round shape, single flow, brass chromium plated, with 1m long chrome finish flexible pipe with wall hook bracket etc. and all fittings for EWC complete all as specified and directed.

S&F in repairs CP brass toilet paper holder, fancy type, with wall hook, bracket complete set as per sample approved complete all as specified and directed.

S&F 15mm bore PVC connections, superior quality, with CP brass nuts of length 450mm complete all as specified and directed.

S&F in repairs CP brass tubular towel rail 20mm dia, 'D' type, 600mm long between flanges, superior quality, fancy type, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.

S&F 5.5mm thick sheet glass shelf assembly, fancy type, sheet glass shelf of size 600mm long and 120mm wide with CP bracket guard and railing, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.

S&F 5.5mm thick sheet glass corner shelf assembly, fancy type, sheet glass shelf of size 250x250mm, with CP bracket guard and railing, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.

S&F peg set of 6, brass chromium plated, fancy type, with 40mm wide brass CP strip, fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and directed.

S&F in repairs 500 litres capacity rotational molded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified in SSR Part-I and directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed suitable for 20mm bore pipe (Min weight 210gms) complete all as specified and directed.

S&F 20mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs concealed stop valves 15mm bore, fancy type, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs CP brass wall mixer for mixing hot & cold water with provision for overhead shower with arm and long bend pipe and wall flanged screwed down for iron pipe for 15mm bore complete all as specified and directed. Make: Jaquar Essco / Hindware/ Plumber

S&F in repairs CP brass shower rose fancy type, with or without swivel joints of size 125mm dia including fixing to steel pipe of 15mm bore complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per item no 118 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per item no 118 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per item no 118 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.

S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 15/16 Amp, 230 volts complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.

S&F sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 Volt, 10 KA breaking capacity complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 4 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB, single pole & neutral 40 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4sqmm nominal cross sectional area and one run of 2.5sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F wall mounted 9/10 W LED integrated mirror light fitting, 600mm long batten with extruded aluminium housing & integrated electronic driver and one no. 9/10 W LED, 6000 K, 230V tube light including and provn of connection from ceiling rose to luminaries with suitable size three core flexible copper wire complete all as specified and directed. Make: Havells cat no. LUMILINE PLUS BS 10WLED865SPCSS or Surya Visco cat no. SLE BT 10 or C&S cat no. LTDC01210WLED/WD or Philips cat no. BN 021LED 12S6500/4000 PSU GR/SI.

S&F FTL fittings with decorative LED batten made up of aluminium casting 18/20 W of size 1200 mm complete standard fittings and fixtures including fixing on walls/roofs with fitting arrangement including neccessary electric connection from ceiling rose to luminaries with suitable size PVC cord complete all as directed. Make: Havells cat Part No. REGALBATTEN8UPTO1X22WDSBSWH/ Surya Batten cat Part No. SUB118 T8 LED/ C&S (CRUX) cat Part No. LTICIX161820W LED/ Philips cat part No. TMC 100 1xT LED 13-20W WH

S&F ceiling light fitting with decorative LED aluminium casting 36 W of size 600x600mm square complete standard fittings and fixtures including fixing on ceiling with fitting arrangement including neccessary electric connection with suitable size PVC cord complete all as directed. Make: C & S Electric Cat No. LTCRP36W or equivalent in Havells / Surya / Philips

S&F Fresh Air fan plastic body, AC single phase 230/240 volts of size 250mm with louvers, including cutting hole in wall of suitable size, grouting the bolts in wall and including neccessary electric connection with suitable size PVC cord complete all as directed. Make: Havells / Khaitan / Orient / Bajaj

M/S KAUSHIK CONSTRUCTION

M/S S S A ASSOCIATES