GE/SRA/T-37/2024-25

Amount

M&L Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Machine cut Pre-Polished Kota Stone Tiles, 22" x 22" size, 18-20mm thick in Flooring, laid over 20mm thick Screed base in Cement Mortar 1:4 laid and joined with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

-ditto- as per item no 01 above but for Machine cut Pre-Polished Kota Stone Tiles 18-20mm thick, in Riser of Steps, Skirting, Dado and Pillar, laid over 10mm thick backing coat of Cement Mortar 1:4 and joined with grey Cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate. Length and quality of kota stone shall be same as that of floor tiles.

-ditto- as per item No 01 but with Machine cut Pre-Polished Kota Stone Tiles, 600mm X 1200mm size, 18-20mm thick in Flooring, laid over 20mm thick Screed base in Cement Mortar 1:4 laid and joined with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

-ditto- as per item no 03 above but for Machine cut Pre-Polished Kota Stone Tiles 18-20mm thick, of size 150mm X 1200mm, in Riser of Steps, Skirting, Dado and Pillar, laid over 10mm thick backing coat of Cement Mortar 1:4 and joined with grey Cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate. Length and quality of kota stone shall be same as that of floor tiles

M&L for Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Granite (Jet Black shade) Slab, 18-20mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including edge moulding, grinding and polishing, laid over and including 20mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate. Size of granite stone shall be as directed by Engineer-in-Charge.

-ditto- as per item No 05 above but for Granite (Jet Black Shade) Tiles, 16-18mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing, fixed over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:3, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate. Length and quality of granite stone shall be same as that of floor tiles.

M&L for dismantling floor tiles alongwith screed bed, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Joint Free HD matt finish Ceramic tiles, coloured, joint free, 9-10 mm thick (Square/rectangular), area of each tile exc 0.18 Sqm but not exceeding 0.38 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the tiles, laid over and including Screed Bed 15mm thick in Cement Mortar 1:4, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.

-ditto- as per Item No 07 above but for matt finish ceramic tiles in skirting, fixed over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate. Length and type of tiles in skirting shall be same as that of floor.

M&L for dismantling floor tiles alongwith screed bed, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Joint Free HD matt finish Ceramic tiles, coloured, joint free, 10 mm thick (Square/rectangular), area of each tile exceedig 0.42 Sqm but not exceeding 1.00 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the tiles, laid over and including Screed Bed 15mm thick in Cement Mortar 1:4, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.

-ditto- as per item No 09 above but for matt finish ceramic tiles in skirting, fixed over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate. Length and type of tiles in skirting shall be same as that of floor.

M&L for dismantling floor tiles alongwith screed bed, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Non-skid/matt finish Ceramic tiles, coloured, joint free, 7 to 8 mm thick (Square/rectangular), area of each tile exceedig 0.11 Sqm but not exceeding 0.18 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the tiles, laid over and including Screed Bed 15mm thick in Cement Mortar 1:4, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.

M&L for taking down wall tiles alongwith screed bed, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Coloured/Printed Glazed Ceramic Tiles, 450 x 300 x 6-7mm thick in Vertical Surfaces i.e. Dado, Skirting, etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, fixed over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:3, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.

Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and directed.

M&L for Rendering (Internal) 12mm thick in cement mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement complete all as specified and directed.

M&L preparing new Plastered surfaces of Walls by applying 1.5mm Wall Putty including Rubbing down with Sand Paper to obtain a Smooth Finish Surface and applying Two Coats of Acrylic Distemper (as approved) over a Coat of suitable Primer with rollers, complete all as specified and directed.

M&L for Rendering 5.0mm thick in cement mortar 1:3 on Concrete Surfaces of Ceilings, Plastered Surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly Plastered surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar 1:4 on external surfaces of Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying exterior wall putty 1.5 mm thick for smooth surface and finished with two coats of exterior acrylic emulsion paint (having anti-dust & anti-algae properties) over a coat of suitable exterior primer, applied with rollers to new wall surfaces of any description, over 10cm width or girth not otherwise described, as per manufactuirer's instructions, upto 4 storey height complete all as specified and directed.

M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the Ratio 1:1:1 shall be applied and finish Even, complete all as specified and directed.

M&L preparing newly Rough Cast plastered surfaces of Walls and applying two Coats of Exterior Emulsion Paint (having anti-dust & anti-algae properties) with approved Tint over a coat of suitable exterior Primer (as per Manufacturer's instructions), complete all as specified and directed.

M&L preparing old Decorated/Treated Plastered surfaces of Exterior Walls upto Four Storey by brooming down or steel wire brushing and scraping down, filling of cracks with suitable paste and applying with rollers One Coat of Exterior Emulsion Paint (having anti-dust & anti-algae properties) with approved Tint (as per Manufacturer's instructions), complete all as specified and directed.

S&F in repair Non-asbestos Fiber Cement Building Boards 6.0mm thick, fixed to Walls with Rawl Plugs and Steel Screws, and fixed-in-repairs, and applying Two Coats of acrylic distemper (as approved) over a Coat of 1.5 mm thick wall care putty for priming the surface complete all as specified and directed.

Demolition Brick work built in cement mortar and in any Position including all Quoins, Arches and Pillars, etc. and removal of debris from site complete all as specified and directed.

M&L for Brick Work with Fly-Ash Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and directed.

M&L Brick work using Serviceable Bricks obtained from Item No. 24 here-in-before including removing old Mortar, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in cement mortar 1:6, complete all as specified and directed.

Taking down damaged/unserviceable PVC Chowkat or Frame not exc. 1.50 Sqm Each with shutter (without taking off shutter from the frame) and removal from site complete all as specified and directed.

Taking down damaged / unserviceable Steel / Wooden / Aluminium Chowkat or Frame not exc. 1.50 Sqm Each with shutter (without taking off shutter from the frame) and removal from site complete all as specified and directed.

Taking down damaged/unserviceable Steel / Wooden / Aluminium Chowkat or Frame exc. 1.50 Sqm but not exc. 4.00 Sqm Each with shutter (without taking off shutter from the frame) and removal from site complete all as specified and directed.

S&F Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site with aluminium hinges ss per specification & drawing and fixing in the Frame complete all as specified and directed. NOTE : Aluminium Hinges will be Measured and Paid under appropriate Item.

S&F Factory made solid PVC door frame (chowkhat) of size 100 mm x 45mm made out of 5mm thick single side prelam PVC Sheet & edges painted to match with the prelam sheet, frame reinforced with MS square tube of size 40mm x 20mm of 19 guage throughout the frame, fixed in opening as per specification & drg and as per manufacturer instructions complete all as specified and directed.

M&L for Factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2 mm thick 3D wood grain moulded PVC Sheet polyurethane painted on the front face & 2 mm thick prelam PVC sheet on back face with particle board core suppling & fixing in the frame at site with aluminium hinges ss per specification & drawing and fixing in the Frame complete all as specified and directed. NOTE : Aluminium Hinges will be Measured and Paid under appropriate Item.

S&F factory made single extruded WPC (Wood Polymer composite) solid door/window/ceosetory windows & other frames/chowkhat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 grams) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N(Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with mild steel hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. (NOTE: MS hold fast/lugs or SS dash fasteners shall be paid for seperately. For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made)

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with aluminium butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and directed. (Note: Aluminium butt hinges and necessary S.S screws shall be paid separately)

-ditto- but for 30mm thick wire mesh WPC door shutter with stainless steel (SS 304) wire mesh with wire dia 0.63 mm and average width of aperture 1.4 mm in both sides with member dimensions as under :- (i) Top and middle rails :- 100 mm x 30 mm (ii) Lock rail :- 150 mm x 30 mm (iii) Bottom rail :- 200 mm x 30 mm (iv) Styles :- 150 mm x 30 mm (Note: SS Wire mesh, Aluminium butt hinges and necessary S.S screws shall be paid separately)

S&F Aluminium Barrel Tower Bolt 150mm long (weight not less than 130 Gram), extruded section, complete all as specified and directed.

S&F Aluminium Barrel Tower Bolt 200mm long (weight not less than 210 Gram), extruded section, complete all as specified and directed.

S&F Butt hinges, 75 mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised , type C-21 and fixed, with SS screws complete all as specified and directed.

S&F Butt hinges, 100 mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised , type B-21 and fixed with SS screws complete all as specified and directed.

S&F Extruded brass handles, fabricated type polished, of size 150mm long, fixed with brass screws complete all as specified and directed.

S&F Aluminium alloy Handle 150mm long (weight not less than 100 Gram), cast type, anodised, fixed with SS screws complete all as specified and directed.

S&F Aluminium alloy, anodized, Sliding Door Bolt 250mm long with Hasp Staple (Bolt type) and Fixing Clips of Sheet cast or extruded section and fixing Bolts and Sliding Bolts of extruded section and fixing, complete all as specified and directed.

S&F powder coated (medium thickness of powder coating 50 micron) anodised aluminium frame for door, windows, partitions and ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminum fittings such as suitable 150 mm long peg stays (01 No), hinges type B-21 100 mm long (02 Nos), suitable handle - 01No each shutter etc as per manufactures instruction complete all as specified and directed. (NOTE: Quoted rate is deemed to be inclusive of the cost of include for anodised aluminium hard ware as indicated, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames, handle etc as described in item. Sheet glass shall be measured seperately)

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips rubber packing handle 2 Nos in each door, hinges, Mortise lock vertical type size 100 mm 4 levers of brass in each door, anodised aluminium snap beading screws etc as per manufactures instruction complete all as specified and directed. (NOTE:- Quoted rate is deemed to be inclusive of the cost of include for anodised aluminium hard ware as indicated, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames, handle, Mortice Lock etc as described in item. Sheet glass shall be measured seperately)

S&F powder coating aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge.

S&F 12mm thick Prelaminated particle board / Engineered Wood Board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to aluminium frame work etc complete all as specified and directed.

S&F in repair Door Closer Aluminium (Die cast) body, hydraulically regulated, Designation No. 3, Universal type, suitable for Door Shutters of 851mm to 1000mm in width and of weight between 61.00 to 80.00 Kilogramcomplete all as specified and directed.

S&F in repair Mild Steel Mortice Lock 100mm in size, 4-Lever, Vertical type, complete all as specified and directed.

S&F in repair Double Action Floor Spring Hydraulically Regulated made up of minimum 1.25mm thick Aluminium alloy Sheet Foundation Box, Main Body with Stainless Steel Cover, Governing Pivot made of Brass, Other Parts made of Mild Steel heavy duty complete all as specified and as directed.

S&F Sheet Glass 5.50 mm thick, Tinted (as approved by GE), fixed to Aluminium Windows of size exc 0.50 sqm each pane complete all as specified and directed.

S&F Sheet Glass 4.0mm thick, Frosted (as approved by GE), fixed to Aluminium Windows of size exc 0.50 sqm each pane complete all as specified and directed.

S&F in repair Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description in rafters, purlins and wind ties wtc and removal from site complete all as specified and directed.

M&L for Mild steel framed works such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar works conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L preparing new or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof/wall coverings, complete all as specified and directed.

S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.

M&L for pre-painted, galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Taking up or down Steel Tubing 15mm bore (dia) with Fittings/ Connections, segregating Serviceable Pipes and Fittings/ Connections and keep in Safe Custody for re-use, complete all as specified and directed.

Taking up or down Steel Tubing 20mm bore (dia) with Fittings/ Connections, segregating Serviceable Pipes and Fittings/ Connections and keep in Safe Custody for re-use, complete all as specified and directed.

S&F Chlorinated Polyethylene Chloride (CPVC) pipes 20 mm outside dia, SDR 11, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings (such as Bends, Elbows, Tees, Short Pieces, Connectors, Back - Nuts Caps, Plugs, Unions, Flange (core) & flange (ring), reduction Tee, reducing socket, Male & female threaded socket, tank connector etc) fixed / laying walls, ceilings or in floors etc. with suitable size MS clamp of spacing 1.00 mtr etc pipe line complete all as specified and directed.

-ditto- but with 25 mm outer dia size CPVC pipes

S&F CPVC Ball valve 20mm (outer dia), screwed both Ends for CPVC pipes, complete all as specified and directed.

S&F CPVC Ball valve 25mm (outer dia), screwed both Ends for CPVC pipes, complete all as specified and directed.

S&F in repair Chromium plated brass Pillar tap, fancy type, with aerator, fixed to wash hand basin, complete all as specified and directed.

S&F in repair 15mm bore chromium plated single lever central hole basin mixer without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed.

S&F in repair 15mm bore chromium plated sink cock, swivel casted spout (wall mounted model) complete all as specified and directed by Engineer-in-charge

S&F in repair Chromium plated brass Bib cock with wall flange , fancy type, short body, fixed to 15 mm bore of Iron pipe complete all as specified and directed.

S&F in repair Chromium plated brass Bib cock with wall flange , fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed.

S&F in repair 15mm bore chromium plated two way bib cock with flange , fancy type complete all as specified and directed.

S&F in repair angle valve, 15 mm bore, cast copper alloy, chromium plated fancy type, concealed type with wall flange fixed to iron pipe complete all as specified and directed.

S&F in repair Chromium plated brass two way Angular stop cock , fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe, complete all as specified and directed.

S&F in repair chromium plated brass over head shower rose (100 mm dia) with arm , with 3 flow, fixed to 15mm bore of iron pipe complete all as specified and directed.

S&F in repair chromium plated brass over head rain shower rose, square (minimum 150 mm size), duly fixed from ceilings, single flow, fixed to 15mm bore of iron pipe complete all as specified and directed.

S&F in repair Chromium plated brass Wall mixer , concealed type, with concealed body, with overhead shower arrangement fixed with 15 mm bore Iron pipe complete all as specified and directed.

S&F in repair Jet Spray with Connection Pipe 15mm bore (dia), Brass Chromium Plated and suitable for Wash Down Water Closet Pan (Pedestal Pattern) , complete all as specified and directed.

S&F in repair chromium plated Hand shower (health faucet), ABS body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed.

S&F in repair Vitreous China White Squatting Pan of size 580x440mm, 'Orissa' Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces, complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK / ESSSCO, Cat No: ECS-WHT-551SSPP)

S&F in repair vitreous china floor mounted one piece closet (Pedestal pattern), white including vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC soft close seat cover and connecting fittings complete all as specified and directed. (Make : CERA, Model: CHAMP / PARRYWARE, Model: Entice / HINDWARE, Model: FLORA / ASIAN PAINTS, Model: IMMERSE / ESSCO, Cat No: AIS-WHT-101851S220SPPSM )

S&F in repair vitreous china, wall mounted closet, white incl bracket, trap, PVC soft close seat cover and connecting fittings complete all as specified and directed. (Make : CERA, Model : COMPACT / PARRYWARE, Model: CASCADE NXT / HINDWARE, Model: STUDIO)

S&F in repairs 100mm bore cast iron sanitary connection socket to fit WC outlet complete all as specified and directed.

S&F in repair Plastic Water Closet Seat and Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device and complete all as specified and directed. NOTE: This item shall be measured for replacement of only seat cover on existing EWC.

S&F in repair Plastic seat & cover, white, soft close type, for water closet (of any description) incl chromium plated hinge complete all as specified and directed. NOTE: This item shall be measured for replacement of only seat cover on existing EWC.

S&F in repair flush valve concealed push type (dual flush) 40 mm bore including concealed body and all other fittings complete all as specified and directed. (Make: CERA, Cat No: F8010202 / HINDWARE, cat No: F860042 / PARRYWARE, Cat No: T3305A1 / PRAYAG, Cat No: BEA-37 / JAQUAR, Cat No: FLV-1089N)

S&F in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and incl with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART /ESSCO, Cat No: WHE-WHT-183NL)

S&F in repair PVC Connection Pipe 15mm size and 60 Cm in length with Adapter Nuts of PVC, complete all as specified and directed.

S&F in repair vitreous china, white, under counter wash hand basin, including providing 32 mm dia chromium plated waste coupling and making all necessary connections complete all as specified and directed. (Make of Basin : Hindware, Cat No: 10049 / CERA, Cat No: S2030104 / JAQUAR, Cat No: CNS-WHT-705 or equivalent model in PARRYWARE) (NOTE: Cost of CP wate coupling is deemed to be included in the quoted rates)

S&F in repair CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed. (MAKE: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231C / HINDWARE, Cat No: F850003 / CERA, Cat No: F8060302/ PRAYAG, Cat No: BEA-26)

S&F in repair Vitreous china, white, half stall urinal flat back with grating and union for discharge pipe (excl flush pipe and flushing cistern and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S&F in repair Urinal concealed wall mounted sensor including all necessary fixing arrangements and connection complete fixed including taking down existing sensor complete all as specified and directed . (Make : ESSESS, Cat No: 202CLMAB / PRAYAG, Cat No: BSU-11 or equivalent model in JAQUAR / PARRYWARE / CERRA)

S&F in repair Vitreous China Wash Hand Basin 460x330mm in size, White (Flat Back or Angle Back Type), provided with 32mm dia Brass Chromium Plated Waste Fitting, PVC waste pipe, brackets incl making good disturbed Surfaces in Cement Mortar 1:3 and filling joints with whte cement complete all as specified and directed. (NOTE: Cost of CP wate coupling and PVC waste pipe is deemed to be included in the quoted rates)

S&F in repairs toilet paper holder, chromium plated, surface type with flap complete all as specified and directed.

S&F in repair Glass Shelf (Bath Tray), 600 mm long alongwith all accessories complete all as specified and directed.

S&F in repairs, Tubular towel rail , 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed.

S&F in repair Chromium plated brass Towel ring, round or square, complete all as specified and directed.

S&F in repair soap dish, square, acrylic body with chromium plated base complete all as specified and directed.

S&F in repair soap dispenser with glass bottle with chromium plated base complete all as specified and directed.

S&F in repairs Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe complete all as specified and directed.

S&F in repair Grating 100mm dia in size, Chromium Plated (as approved), complete all as specified and directed.

S&F in repairs for waste coupling chromium plated for sink /wash basin, suitable for 32mm dia waste pipe complete all as specified and directed. (NOTE: This item shall only be measured for replacement in existing sinks, basins etc)

S&F in repair PVC Waste Pipe 32mm bore (dia), 60-75 cm length (as required at Site), complete all as specified and directed. (NOTE: This item shall only be measured for replacement in existing sinks, basins etc)

S&F in repair Rotational Moulded Polyethene Water Storage Tank, 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS, hoisted and fixed in Position complete all as specified and directed.

S&F in repair Rotational Moulded Polyethene Water Storage Tank, 1000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS, hoisted and fixed in Position complete all as specified and directed.

S&F in repairs Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe, complete all as specified and directed.

M&L Cleaning and removing all Scales and dirts from the Tank and mouths of circulating Pipes, etc. after draining out Water from the Tank of capacity 250 Litre but not exc. 500 Litre, cleaning the Tank by scrubbing the deposits with Wire Brush, re-fixing Inlet and Outlet Pipes in the Same Position and writing Letters "CLEANED ON DD.MM.YYYY" (i.e. Date of Cleaning of Tank) not exc. 50mm in height, complete all as specified and directed.

M&L Cleaning and removing all Scales and dirts from the Tank and mouths of circulating Pipes, etc. after draining out Water from the Tank of capacity 500 Litre but not exc. 1000 Litre, cleaning the Tank by scrubbing the deposits with Wire Brush, re-fixing Inlet and Outlet Pipes in the Same Position and writing Letters "CLEANED ON DD.MM.YYYY" (i.e. Date of Cleaning of Tank) not exc. 50mm in height, complete all as specified and directed.

S&F in repair PVC (SWR) 75 mm floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, laid on floor, complete all as specified and directed.

S&F in repairs PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid on floors, complete all as specified and directed.

S&F in repairs PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls with PVC clips, complete all as specified and directed.

S&F in repair PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, fixed to Walls with PVC Clips, complete all as specified and directed.

S&F in repair PVC (SWR) 75mm bore (dia), Bend any type, provided with Access Door, etc. and jointing with Solvent Cement, complete all as specified and directed.

S&F in repair PVC (SWR) 110mm bore (dia), Bend any type, provided with Access Door, etc. and jointing with Solvent Cement, complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal, with access door complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal, with access door complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) junction single (single T) equal or unequal, with access door complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) junction single (single T) equal or unequal, with access door complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, snap grid etc complete all as specified and directed.

S&F 10 to 12mm thick gypsum board false ceiling including Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including applying two coats of plastic emulsion paint over a coat of primer to exposed surfaces complete all as specified and directed.

S&F Suspended metal grid Ceiling System with mineral fibre acoustic tiles as per following specifications:- a) Ceiling Tiles:- Mineral fibre acoustic tile of 16mm thickness having sand textured finish with acoustical punchers, bevelled tegular edge and 8mm drop in module size of 600 x 600mm. Tiles shall have humidity reistance (RH) of 99%, NRC 0.50 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, CAC of 33db as per ASTM E1414, Light Reflectance ≥85% as per ASTM E-1477, Thermal Conductivity k = 0.052 - 0.057 W/mK, Colour Global White, Fire Performance of class 0/1 as per BS 476 Part 6/7 and Class A as per ASTM E84. b) Metal Grid:- The grid system shall be 15 mm wide T - section flanges colour global white (matching to tile color) having roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections). The deflection loading of the system shall be 12.5 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 15kg/m. The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. Contd......

All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. The ceiling grid sections shall be fixed to ceiling with 6 mm dia GI hangers upto required length by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5mm dia 40 mm long. (MAKE OF CEILING GRID : ARMSTRONG, Model: SUPRAFINE 38 or equivalent in GYPROC / USG BORAL / UNISTEEL MAKE OF CEILING TILES: ARMSTRONG, Model: DUNE or equivalent item in GYPROC / USG BORAL / U TONE)

S&F PVC solid wall lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per manufacturer’s specification and instruction and directed by the Engineer-in-Charge.

S&F 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

Repairing of Aluminium Door, Windows, Ventilators Shutter Fixed/ Side Hung /Sliding Type including taking down, if necessary, refixing with minor adjustments for opening and closing properly with replacement of necessary Jointing Cleats, Glazing Clips, Rubber Neoprene Packing, Aluminium Snap Beading, Screws, etc. and repairing of Locking Arrangement if any, complete all as specified and directed. (NOTE: Quoted rate shall be deemed to include for jointing cleats, glazing clips, rubber neoprene packing, aluminium snap beading, screws etc as required/ordered at site)

Removing vegetation growth/shrubs (girth up to 30 CM), cutting in brick wall/concrete surface upto triple storey building carefully without damaging the existing soil, vent, water supply pipe and removing roots of plants completely and filling the gaps with PCC 1:2:4, Type B-0 finished with existing surface including all scaffolding ladder etc as required surface are n.exc. 0.36 Sqm each complete all as specified and directed.

M/s Satguru Traders

STAR CONSTRUCTIONS

M/s Har Nandi Construction Company