REPAIR/ MAINT OF SWIMMING POOL, FILTER BEDS AND CONNECTED ITEMS UNDER AGE E/M OF GE JAIPUR

Amount

M&L for complete overhauling and servicing of filter plant having discharge capacity of 2 lakh Ltr per hrs including opening of plant cover and replacing gasket packing, back washing the filter plant with complete process, replacement of useless filter media and filter stone gravels completely and replacement of rusted nuts and bolts, washers and servicing of all control valves for inlet and outlet for proper filling of swimming pool including painting of outer surface of filter plant alongwith inlet and outlet after scrabing of old rusted paint and applying one coat of red oxied primer and two coats of RFU paint of filter plant and rubber coat complete all as specified and directed. Note : (1) Quated rates include neccessary T&P as required at site. (2) All unusable material to be removed competely from the site (3) Minor parts like nut bolts, gasket packing etc shall be included in the quoted rates (4) work should be done through supervisor and manpower which are experienced in the field of swimming pool and filteration plant as examine & directed by engr in charge. (5) Stone gravels shall be measured and paid seperately as supply only under respective item of BOQ

M&L for complete overhauling and servicing of filter plant having discharge capacity of 22000 Ltr per hrs including opening of plant cover and replacing gasket packing, back washing the filter plant with complete process, replacement of useless filter media and filter stone gravels completely and replacement of rusted nuts and bolts, washers and servicing of all control valves for inlet and outlet for proper filling of swimming pool including painting of outer surface of filter plant alongwith inlet and outlet after scrabing of old rusted paint and applying one coat of red oxied primer and two coats of RFU paint of filter plant and rubber coat complete all as specified and directed. Note : (1) Quated rates include neccessary T&P as required at site. (2) All unusable material to be removed competely from the site (3) Minor parts like nut bolts, gasket packing etc shall be included in the quoted rates (4) work should be done through supervisor and manpower which are experienced in the field of swimming pool and filteration plant as examine & directed by engr in charge. (5) Stone gravels shall be measured and paid seperately as supply only under respective item of BOQ

Supply only filter stone gravel of size 15 No (dia 6mm to 7mm) of best quality as per existing for filter plant of swimming pool complete all as specified and directed by Engr-in-charge. Note for item no 1 & 2 :- work should be done through supervisor and manpower which are experienced in the field of swimming pool and filteration plant as examine & directed by engr in charge.

Supply only filter stone gravel of size 13 No (dia 4mm to 5mm) of best quality as per existing for filter plant of swimming pool complete all as specified and directed by Engr-in-charge.

Supply only filter stone gravel of size 11 No (dia 1.5mm to 2mm) of best quality as per existing for filter plant of swimming pool complete all as specified and directed by Engr-in-charge.

Supply only chlorinated isocyanurates grade TCCA-90 (Trichloroisocyanurates acid) in shape of white granular for disinfectant for swimming pool a NA sulphate of super quality contains chlorine more than 90 % duly tested from approved laboratory duly sealed granular type from manufacturer or authorised dealer/distributor complete all as specified and directed. Note for srl item No. 6 to 10 : (i) Brand name/batch number and complete particulars of manufacturer should be printed on the container/packing. (ii) Procurment shall be done through ISI marked manufacture only (iii) Manufacturers test certificate shall be submitted for each container / consignment

Supply calcium based high strength granular chlorination chemical (calcium hypochlorite having chlorine 65% to 70% ) for water treatment. Granular material shall be free of foreign material decomposing at 177 C soluble in water and alcohol not hygroscopic practically clear in water solution at saturation level. The material should not contain more than 5% to 10 % moisture. Granular size should be as follows:- Mesh passing through -100 BSS 1.5 % maximum iron as Fe 0.05% maximum Mn 40 PPM maximum Mol wt 142.98, Toxicity : Oral rate LD 50-850 mg/kg. duly tested from approved laboratory packed in a fibre drum duly sealed granular type from manufacturer or authorised dealer/distributor complete all as specified and directed.

Supply only Aluminium sulphate (non-ferric) grade I having aluminium minimum as 17 % and in granular form without hard lumps and impurities complete all as specified and directed by Engr-in-charge.

Supply only Copper sulphate grade-I in crytal form, deep blue colour, easily soluble in water as per IS specifications suitable for swimming pool complete all as specified and directed by Engr-in-charge.

Supply only bleaching powder grade-I having chlorine content 35% dry and white free flowing powder without hard lumps and impurities and easily soluble in water. The material should not contain more than 0.3% moisture particle size passing through - 1.70 mm IS sieve and stability loss of chlorine should be maximum 1/15th complete all as specified and directed by Engr-in-charge.

S&F in replacement nylon wire brush for suction sweeper assembly as per existing complete all as specified and directed by Engr-in-charge.

S&F in replacement nylon wire brush spring for suction sweeper assembly as per existing complete all as specified and directed by Engr-in-charge.

S&F in replacement of old existing Unsv wheels for suction sweeper assembly as per existing complete all as specified and directed by Engr-in-charge.

S&F in replacement suction sweeper CI stand as per existing, with nut, bolt, washer etc. for suction sweeper assembly as per existing complete all as specified and directed by Engr-in-charge.

S&F in replacement of old existing Unsv assembly belt of thickness 5 mm, with nut, bolt, washer etc for suction sweeper assembly as per existing complete all as specified and directed by Engr-in-charge.

M & L for taking out the centerifugal pump set coupled with electric driven motor of 40 HP, 3 phase, 50 Hz AC supply from its foundation, disconnecting the suction and delivery lines and all electrical connection, lifting up if reqd, transporting the pump to workshop, dismantling and strip opening the pump, metal filling and machining of impeller shaft, replacement of brass bush setting right the defective parts by means of lathe and welding work where ever required, replacement of packing material, complete oiling and greasing, replacing the defective parts, reassembling, transporting the pump to site, reinstalling in position and alignment with motor and on its original location including lowering if reqd, reconnecting all electrical connection, testing all as directed by Engr-in-Charge. Make of existing Centrifugal pump : Mather & Platt Note-(1) All minor repairs, welding etc required to make pump set in satisfactory working condition, brass bush etc shall be inclusive in quoted rates . (2) Major spare parts shall be paid seprately under respective items of BOQ as supply only. Fixing of these parts is included in the rates quoted by the contractor. (3) New items provided shall of size and specification as per existing at site suitable modifications if reqd to fit the new item shall be made by the contractor without any extra cost to the Govt.

Supply only terminal box including connectors of copper, plate of motor complete all as specified and directed

Supply only ball bearing as per existing size complete all as specified and directed Make:- NBC/SKF/TATA or equivalent as approved by GE

Supply only gun metal impeller with neck key complete all as specified and directed

Supply only coupling with cover as per existing complete all as specified and directed

M&L for Cutting of burnt winding and rewinding the stator with supper enamelled copper wire of suitable size for motor of centrifugal pump set 40 HP and class of insulation including insulation paper, sleeves, thimbles etc complete all as specified and directed

M & L for taking out the suction sweeper/ mono block pump of capacity upto 5.0 HP, 1/3 phase, 230/415 volts AC supply, from its foundation, disconnecting the suction and delivery lines and all electrical connection, lifting up if reqd, transporting the pump to workshop, dismantling and strip opening the pump, metal filling and machining of impeller shaft, setting right the defective parts by means of lathe and welding work where ever required, replacement of packing material, complete oiling and greasing, replacing the defective parts, reassembling, transporting the pump to site, reinstalling in position and alignment with motor and on its original location including lowering if reqd reconnecting all electrical connection , testing all as directed by Engr-in-Charge.Note-(1) All minor repairs, welding etc required to make pump set in satisfactory working condition shall be inclusive in quoted rates . (2) Major spare parts shall be paid seprately under respective items of BOQ. Fixing of these parts is included in the rates quoted by the contractor. (3) New items provided shall of size and specification as per existing at site suitable modifications if reqd to fit the new item shall be made by the contractor without any extra cost to the Govt.

Supply only terminal box including connectors of copper, plate of motor complete all as specified and directed

Supply only ball bearing as per existing complete all as specified and directed Make:- NBC/SKF/TATA or eqvt as approved by GE

Supply only gun metal impeller with neck key complete all as specified and directed

Supply only coupling with cover as per existing complete all as specified and directed

M&L for Cutting of burnt winding and rewinding the stator with supper enamelled copper wire of suitable size and class of insulation including insulation paper, sleeves, thimbles etc. complete all as specified and directed

Supply and replace DOL starter for 10 HP, 1/3 phase, 230/415 volts AC supply motor complete all as specified and directed

M&L for replacement of old existing unsv cable of size 4 Sqmm 3 core 1100 volt grade PVC insulated sheathed multistranded copper conductor along with proper lugs complete all as specified and directed.

Supply only Bamboo 8 mtr long 50 mm dia for cleaning of swimming pool floor etc complete all as specified and directed.

M&L in replacement of PVC green hose pipe (ISI marked) heavy duty 50mm dia with clamp if necessary complete all as specified and directed.

,---ditto--- all as per serial item No 21 above but 20mm dia complete all as specified and directed.

M&L in replacement gun metal gate valve with iron wheel head, screwed both ends for jointing iron pipes, non rising, forged brass spindle class-1, IS 778 marked of 50mm bore including taking down old unsv complete all as specified and directed.

,---ditto--- all as per serial item No 23 above but 40mm dia complete all as specified and directed.

,---ditto--- all as per serial item No 23 above but 25mm dia complete all as specified and directed.

,---ditto--- all as per serial item No 23 above but 20 mm dia complete all as specified and directed.

Supply and fix in repair cast steel ball valve ASME B16.5 Class-150 (Drilled) with both ends flanged three piece design of size 25 mm as per existing (ISI marked) including nuts, bolts and washers all as per specified and directed by Engr - in - charge

Supply and fix in replacement of Butterfly valve of 200mm dia (ISI marked) complete with all fittings/accessories required for fixing in existing header including taking down the old valve complete all as specified and directed.

,---ditto--- all as per serial item No 28 above but 150mm dia complete all as specified and directed.

,---ditto--- all as per serial item No 28 above but 100mm dia complete all as specified and directed.

Supply and fix in replacement sluice valves, class PN 1.6 of 150 mm bore with cast iron body , non rising type and cast iron wheel head, both ends flanged, IS-14846 marked comlete with neoprene rubber gasket, jointing material and incl nuts/bolts/washer of suitable size etc including taking down old unsv complete all as specified and directed

,---ditto--- all as per serial item No 31 above but 100mm dia complete all as specified and directed.

Dewatering of Sump near swimming pool filter plant of internal dia 5 mtr dia and 7.16 mtr depth by using dewatering pump set/manual labours, cleaning the entire surface of the sump using bleaching powder first , removing the sedimentation and algae with metal brushes than cleaning with fresh water and dewatering the dirty water by using mechanical pump complete all as specified and directed. Note : Quoted price shall be included all T&P, chemicals reqd for cleaning and nothing extra shall be paid on this account.

Dewatering of Sump near swimming pool filter plant of internal dia 6.5 mtr dia and 8.02 mtr depth by using dewatering pump set/manual labours, cleaning the entire surface of the sump using bleaching powder first , removing the sedimentation and algae with metal brushes than cleaning with fresh water and dewatering the dirty water by using mechanical pump complete all as specified and directed. Note : Quoted price shall be included all T&P, chemicals reqd for cleaning and nothing extra shall be paid on this account.

M&L for spray painting of pressure filter of size 2.5 x 5.5m size with two coat of synethic enamel paint light blue colour and writing of name on filter with white colour as directed by Engineer In Charge

M&L for painting of centerifugal pump set coupled with electric driven motor of 40 HP, 3 Phase 415 volts ,with scrapping the existing paint with wire brush and painting with two coats of synthetic enamelled spray paint of existing colour of superior quality after making good to existing painted surfaces complete all as specified and directed.

M&L for painting of centerifugal pump set of capacity 5 HP, 3 Phase 415 volts, with scrapping the existing paint with wire brush and painting with two coats of synthetic enamelled spray paint of existing colour of superior quality after making good to existing painted surfaces complete all as specified and directed.

M&L in replacement non return valves 150mm size with cast iron body and both ends flanged, IS-5312, ISI marked comlete with neoprene rubber gasket, jointing material and incl nuts /bolts /washer of suitable size etc complete all as specified and directed including taking down old unsv complete all as specified and directed.

,---ditto--- all as per serial item No 38 above but 100mm dia complete all as specified and directed.

S & F in repair of CI foot valve 200 mm dia, ISI marked with all necessary fittings of complete all as specified and directed.

,---ditto--- all as per serial item No 40 above but 150mm dia complete all as specified and directed.

M&L for repair of old damaged brick masonry valves pit chamber of 1200x1200x900 mm (Internal dimension of chamber) made with sub class 'B' old size bricks, compressive strength not less than 75 Kg/sqcm built in cement mortar 1.6 for sluice valve chamber including necessary excavation, foundation concrete in PCC 1:3:6 type C1 using 20 mm graded stone aggregate and 15mm thick inside cement plaster with cement mortar 1:4 with floating coat of neat cement, PCC coping type B1 (1:2:4) using 20mm graded stone aggregate) MS frame with angle iron 40x40x6 mm and cover of MS sheet 3.15mm thick including tarring and painting (where required ) the steel surface with two coats of synthetic enamel paint over a coat of red oxide prime complete as specified and locking arrangement directed by Engineer-in-Charge including dismantling of old valve pit & removing the material.

Labour only for checking the serviceability of the different spares/ component/ parts of the starter and motor pump set/ panel of any capacity at any site including minor repair like wiring etc and making serviceable complete all as directed by Engr-in-charge. Note : T&P reqd shall be inclusive in the quoted rate

S&F in replacement of PVC pipe 40mm dia including all fitttings and clamp if necessary complete all as specified and directed

,---ditto--- all as per srl item No 44 above but 25mm dia pipe complete all as specified and directed

S&F in repair MCCB four pole, 200amp, 415 volt, adjustable type, with breaking capacity 36KA, thermally adjustable between 70 to 100% including 4 spreader link set of same make as that of MCCB including reqd cable connections with copper lugs of suitable size and testing & commisioning and make good complete all as specified and directed.

S&F in repair MCCB TPN, 100amp, 415 volt, adjustable type, with breaking capacity 16KA, thermally adjustable between 70 to 100% including 4 spreader link set of same make as that of MCCB including reqd cable connections with copper lugs of suitable size and testing & commisioning and make good complete all as specified and directed.

S&F in repair MCCB TPN, 63amp, 415 volt, adjustable type, with breaking capacity 16KA, thermally adjustable between 70 to 100% including 4 spreader link set of same make as that of MCCB including reqd cable connections with copper lugs of suitable size and testing & commisioning and make good complete all as specified and directed.

Disconnecting exisitng LT over heated or burnt cable terminal / joint at panel/ feeder piller & LT cable of any size culting out over heated/ burnt/ unserviciable portion of cable, stretching/ opening cable to suitable required length etc and fixing aluminium lugs / joint material and suitable nuts bolts & washer etc all as direeted by Engr-in-charge

S&F in repair cooper cables PVC insulated over all sheathed armoured ISI marked of size 10 sqmm, 3 core, 1100 volts grade complete all as specified and directed.

S & F in repair detachable joints suitable for of 80mm dia size CI/DI pipe complete with rubber rings, nut, bolts, necessary fitting including excavation and earthwork, cutting of pipe etc complete all as specified and directed .

,---ditto--- all as per serial item No 51 above but 100 mm dia size complete all as specified and directed

,---ditto--- all as per serial item No 51 above but 150 mm dia size complete all as specified and directed

,---ditto--- all as per serial item No 51 above but 200 mm dia size complete all as specified and directed

Supply and fixing in replacement of fully automatic star delta starter of centrifugal pump 40 HP, 3 Phase, 415 volt, relay range 30-50A cpmprising single phase preventer, power contactors of suitable size ISI marked, overload relay including testing and commissioning complete all as specified and directed by Engineer-in-Charge. Make:- L&T /havells/ABB/siemens or eqvt as approved by GE

M&L for earthing complete with galvanized steel earth plate electrode of size 60cmx60cmx6.0mm buried directly in ground, vertically to depth not less than 2.5mtr below normal ground level with top edge of the earth plate at depth not less than 1.5 metre below ground level surrounded from all sides with alternate layers of charcoal and common salt and connected with galvanised earth strip 32 x 6 mm by means of GI bolts, nuts washers & check nuts electrode connected to main switch board or main control board or on poles or on transformer and GI pipe medium grade 20mm bore for watering, 40mm bore GI pipe medium grade for protection of GI wire upto test point including providing funnel and wire mesh GI frame and 10cm thick suitably reinforced RCC pit cover, PCC chamber pit with PCC (1:3:6) type C2 using 40mm graded stone aggregates complete including excavation and earth work in any type of strata, disposal of surplus soil to a distance not exceeding 50 mtr, all as specified ans shown in Electrical plate No. 3 of SSR Part-1, PCC pit shall be provided at least 50 cm away from the earth pit and not just on earth pit including testing on completion complete. (Note - GI strip size 32x6 mm upto 7.5 m included in the item).

M&L for writing latters or figures(block,Romen,Italic,or indian) n cxc. 30 Cm hight, before writing painter will scrub/clean the floor/wall as per requirement dimention and double coat a base paint complete all as specfied and directed .

M&L for preparation of old painted GI/MS/DI pipe surfaces upto 200 mm dia at swimming pool installations and applying two coats of synthetic enameled paint after applying one coat of red oxide primer.

S &F electric shock treatment chart printed on A0 size paper duly plastic laminated and fixed inside a wooden/PVC photo frame of 50 mm width with 3 mm sheet glass and 6 mm plybood backing and suitable hanging arrangement to wall with hooks/steel chain etc, including taking down old U/S one complete all as specified and directed by Engineer-in-charge.

S &F first aid chart printed on A0 size paper duly plastic laminated and fixed inside a wooden/PVC photo frame of 50 mm width with 3 mm sheet glass and 6 mm plybood backing and suitable hanging arrangement to wall with hooks/steel chain etc, including taking down old U/S one complete all as specified and directed by Engineer-in-charge.

S & F in reapir insulation mat of thickness 3mm thick as per IS 15652, ISI marked of size 1m x 2m to safegaurd of electric shock as per specified and directed by EIC

Supply and fix in replacement hard teak wood display board made of size 4 feet x 3 feet with aluminium alloy frame duly painted with suitable double coat paint complete with inside premium folked fabric (velvet) cloth surface for fixing of papers with 50 pins including glass fittings door & locking arrangement complete all as specified and directed by Engineer-in-charge.

Disconnecting and taking out exisitng LT over heated or burnt cable terminal/ joint at panel/fidder piller & unserviciable portion of LT cable of any size , after that stretching/ opening cable to suitable required length etc and fixing aluminium lugs / joint material, Phase sequencial, cable gland and suitable nuts bolts & washer etc complete all as specified and directed by Engr-in-charge.

Taking up or down old unsv 15mm bore steel tubing and connections from walls and ceilings, trenches, under floor or road, complete all as specified and directed.

,---ditto-- all as per srl item No 64 above but 20 mm bore pipe complete.

,---ditto-- all as per srl item No 64 above but 25 mm bore pipe complete.

,---ditto-- all as per srl item No 64 above but 50 mm bore pipe complete.

,---ditto-- all as per srl item No 64 above but 80 mm bore pipe complete.

S&F 15 mm bore galvanised steel tubes "medium grade " (ISI marked) with all necessary fitting (ISI marked) and fixed complete to walls and ceilings or laid in floors/trenches complete all as specified and directed.

,---ditto-- all as per srl item No 69 above but 20 mm bore pipe complete.

,---ditto-- all as per srl item No 69 above but 25 mm bore pipe complete.

,---ditto-- all as per srl item No 69 above but 50 mm bore pipe complete.

,---ditto-- all as per srl item No 69 above but 80 mm bore pipe complete.

M & L for transporattaion & taking out / lifting out of submersible pump set of Capacity 10 to 12.5 HP, 3 phase,415 volts, 50Hz, AC supply along with column pipe of any size from the bore well after disconnecting electric connection, dismantling of pump and motor for repairing/ replacing defective parts as ordered, oiling, greasing as required and re-assembling and testing including replacing worn out nuts, bolts, washers complete and lowering the same after repairing and making electrical and delivery pipe connections complete all as specified and directed. Note : - (i) The spare part required for replacement shall be measured & paid for separately as supply only under item

Supply only thrust bearing with plate of pump Make:- NBC/SKF/TATA or eqvt as approved by GE

Supply only, gun metal impeller with neck key

Supply only rubber gasket 3 mm thick having 4 Nos of 5/8" dia hole

M&L for cutting of burnt winding and rewinding the stator with PVC insulated copper wire as per existing size of submerssible pump motor 10 to 12. 5 HP with suitable class of insulation including insulation paper, sleeves, thimbles etc.

Supply and fix in repair of fully automatic star delta starter suitable for 20 HP Capacity motor comprising of single phase preventer, power contactor of suitable size, overload relay complete all as specified and directed. Make :- L&T / ABB / Havells / Siemens or equivalent as approved by GE

Supply only 50 mm dia column pipe both side flanged and welded GI medium grade ISI marked (Each of 3 m length) including nut, bolts etc complete all as specified and directed. Note : Each pipe of 3m length shall be counted as one unit.

Supply and fix in replacement submerssible copper cable PVC insulated over all sheathed flat ISI marked of 1100 volts grade of 4 Sqmm 3 core complete all as specified and directed.

Material and labour for providing area cleaning/sweeping of preimises swimming pool installation (Ph House) including cutting out green vegetation, roots, bushes, Tree branches, picking polothine and other unwanted material from the installation area and maintaining the ground surrounding the installation and removing the same out side the defence area as directed by Engr in charge. The approx area of installation kept clean all as under (1) Swimming pool No 1 - 1200 Sqm (2) Swimming pool No 2 - 900 Sqm Note:- (i) If contractor is fail to clean the area of installation complete in all respect else recovery @ 1000 per job shall be recovered from his dues and contractors claim shall not enter on this account (ii) Contractor provide required T&P like as ( Broom, axe,saw, bucket etc) (iii) Contractor will responsible to maintain the pump house area clean for Contract period

Supply and fix in replacement informatory glow shine name board of size 6' x 3' made on ACP sheet with acrylic 3D LED letters reading out the name of swimming pool, 02 No MES logo alongwith date, time, ambient temperature and water temperature led light counter with sensors as directed and fixing on swimming pool building including all accessories and wiring from nearest DB, complete all specified and directed.

Supply and fix in replacement informatory name board of size 3' x 2 ' made on ACP sheet with acrylic letters reading out the name , capacity, SM No,Vintage of pump , office name and any other content as directed and fixing on swimming pool pump house buildings including all accessories, complete all specified and directed.

S & F in repairs swimming pool skimmer net set that includes 1 deep leaf skimmer net, 1 leaf rake with mesh net bag and 1 aluminium telescopic pole adjustable type 3 to 4 mtr cleaning tool complete all as specified and directed.

Supply and fix in replacement of wall brush 18" (inches) polished aluminium back cleaning brush design for cleaning wall tile floor, durable nylon bristles poll brush head with EZ clip with 15' (feet) PVC handle

Supply and fix in replacement water high pressure gauge including socket welded to measure pressure in the delivery pipe 0-300 psi complete all as specified and directed.

M&L for chemical and bacteriological testing of swimming pool water for PH value, Alkanity, Turbidity, TDS, iron, chloride, flouride and residual free chlorine etc including collecting water sample from pool in a sterilized bottle and testing in NABL Approved laboratory as per ISO Standard complete all as specified and directed. Note :- Rate quoted shall also deemed to be included for the followings:- (i) Cost of sterilized bottle as required. (ii) Transportation charges for collection of samples from source swimming pool and back.

S&F in replacement digital chlorine test kit with LCD complete all as directed. Make:- Aquasol, Hanna or equivalent make approved by GE

Supply only digital multiparameter meter such as PH/Conductivity/TDS/Temp as per specified and directed by Engineer-in-charge Make : Aquasol, Hanna or equivalent make as directed

Material and labour for preparation of old painted surface of electrical panel inner and outer surface of Length (1 m to 2 m), Height (1 m to 2 m), Breadth( up to 0.5m) by scrubbing with iron brush and applying two coat PU paint with spray machine complete.

M& L for repairing of LT panel any size including welding of doors, fixing of hinges, brazing complete all as specified and directed by EIC.

Supply & fix in replacement for power contactor of capacity 63 Amp, 3 pole as per existing complete all as specified and directed.

Supply & fix in replacement for powercontactor of capacity 32 Amp, 3 pole as per existing complete all as specified and directed.

Supply & fix in replacement single phase preventor for the motors of capacity 40 HP as per existing complete all as specified and directed.

Supply & fix in replacement over load relay coil 30-50 Amp, 230 volts as per existing complete all as specified and directed.

Supply & fix in replacement ampere meter with CTs of range 0-30 amps as per existing complete all as specified and directed.

Supply & fix in replacement voltmeter with PTs of range 0-500 volts as per existing complete all as specified and directed.

Supply & fixing in repairs suction sweeper ISI marked complete with 5.0 HP capacity pump, single phase, 230 volts, 50 Hz AC, with DOL starter, PVC copper wire of size 4.0 Sqmm 3 core (90 Mtrs) mounted on trolley including nylon tow rope not less than (150 Mtrs in length), suction hose pipe of 50mm dia (50 Mtrs length), float, rubber skirt, 50mm NRV, including suction sweeper head (pool cleaner) of size 48" long with rubber tired wheels, PVC core nylon brush complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement stainer for pump suction of size 150 mm bore ISI Marked class MS flanged type with cast iron body and SS stainer in other ends including flanged joint with 3 mm thick rubber gasket including necessary bolts and nuts complete all as specified and directed.

Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth for foundation, etc. or for laying of cables, pipe etc n exc 10sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling-in, including spreading, watering and well ramming in layers not exceeding 25 cm thick each, in soft /loose soil complete all as specified.

Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

M&L for Dismantling of chlorine dosing pump set of capacity 0-10 LPH coupled with 0.5 HP elecctric motor, disconnecting all connections, repairing the motor at site or transporting to workshop, repairing the dosing pump or replace (if reqd) and repairing of single phase 0.5 HP electric motor, all connected accessories and return back to site and reinstalling the equipment, testing and commissioning the dosing pump with satisfactory functioning complete all as specified and directed. Note-(1) All minor repairs, welding etc required to make pump set in satisfactory working condition shall be inclusive in quoted rates . (2) Major spare parts shall be paid seprately under respective items of BOQ as supply only. Fixing of these parts is included in the rates quoted by the contractor. (3) New items provided shall of size and specification as per existing at site suitable modifications if reqd to fit the new item shall be made by the contractor without any extra cost to the Govt.

Supply only dosing pump of capacity 0-10 LPH, pressure 100 PSI with suction delivery tubing and PVC non return valve

Supply only ball bearing as per existing. Make:- NBC/SKF/TATA or eqvt as approved by GE

Supply only gun metal impeller with neck key

M&L for Cutting of burnt winding and rewinding the stator with supper enamelled copper wire of suitable size for 0.5HP motor and class of insulation including insulation paper, sleeves, thimbles etc complete all as specified and directed

Note:- (a) Material like sluice valve, MCCB, cable, pipe etc shall be procured by contractor in one time for Min 75% quantity of as mentioned in BOQ of approved make from authorised dealer of manufacturer within 30 days of date of commencement and purchase vouchers and manufacturer test certificate (where applicable) shall be submitted by contractor before claim of payment. (b)The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

Lakshmi Enterprises (BID ID -3255703)

SHREE BHAGWATI ENTERPRISES (BID ID -3256130)