Up-gradation of PHC into AB-HWC at village Kharkan and Siwan Distt. Kaithal (Providing Special repair to EI).

Amount

1: - Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections . Double pole switch 32 amp. 415 Volts, 31.12 (a) (v) Cat-B

: - Triple pole switch with neutral link 63 amp. 415 Volts. 31.12 (a) (xv) Cat-B

: - Four pole change over switch 63 amp. 415 Volts 31.12(a)(xxiv) Cat-B

2: - Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. Size 40 mm x 40 mm x 6 mm. 31.13(ii)

3: - M.S.Sheet . Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide. 31.14 (i)

4: - Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. SP MCB of 9 KA breaking capacity 6 amp. to 32 amp. 31.17a) (ii)

: - SPN MCB of 9 KA breaking capacity 6 amp. To 32 amp. 31.17(a) (ii)

5: - Supply and erection of Fittings and Accessories. Call bell 220 / 230 volts A.C. bakelite with double coil. 31.18 (vii)

: - Bakelite angle / straight button holder large size. 31.18 (xi)

: - Switch 5 amp. On existing sheet. 31.18 (xii)

: - Wall socket 5 amp. On existing sheet. 31.18 (xiii)

: - 15 amp. Switch on existing sheet . 31.18 (xiv)

: - 3 pin 15 amp. Multi socket on existing sheet. 31.18 (xv)

: - Erection only of 1x40 watts or 2x40 watts 1220 mm long / 1x20 watts or 2x20 watts ,610 mm long fluorescent tube fitting directly on wall including necessary connections with 0.75 sqmm ( 24 / 0.20 mm ) PVC copper flexible cable for connecting the tube with the adjecent point. 31.18 (xxiv)

6: - Erection and carriage of fans.. Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work. 31.20 (i)

: - Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to he site of work. 31.20 (iii)

: - Making suitable hole in the wall upto 450 mm sweep exhaust fan including finishing the same and fixing of wire mesh duly fixed with Deodar wood frame of section 40 mm x 25 mm thick. 31.20 (v)

: - Pdg. and fixing of required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan upto 450 mm sweep. 31.20 (vi)

7: - Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Galvanised iron pipe 50 mm dia on flushed. 31.21 (xiii)

: - Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness on surface. 31.21 (xvi)

: - Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed. 31.21 (xxii)

8: - Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . 31.22(i)

: - Extra for using salt and charcoal / coke for pipe earth electrode as required. 31.22(ii)

: - Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. stapples of same size. 31.22(xix)

9: - Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 10 Sq. mm 2 Core Cable . 31.26 (iv) Ard.

: - 16 Sq. mm 4 Core Cable . 31.26 (xI) Ard.

10: - Street Light. Supply and erection of 32 mm dia meter 1.5 metre long bracket ( B-Class ) making an angle of 10 to 15 degree with horizontal plane for mounting street light fitting fixing of GI bracket on wall with 2 Nos. , 32 mm x 3 mm thick MS clamps including the cost of cutting , welding of GI pipe complete with cement sand mixture , bolts and nuts etc. including necessary connections . 31.30 (III) ( xv )

11: - Wiring only in 1.5 Sqmm PVC insulated copper conductor cable in existing conduit pipe and MS boxes covered with 5mm thick bakelite sheet including cost of switch, wall socket, ceiling rose etc. Fan Point Medium Point 31.38 (I) (b)

: - Long point. (c)

: - Light Point Short point 31.38 (II) (a)

: - Medium Point (b)

: - Long point. (c)

: - Call bell point Long point. 31.38 (VI) (c)

: - 3 pin 5 amp. plug point including earthing the 3rd. pin etc. Short point 31.38 (VII) (a)

: - Medium Point (b)

: - Long point. (c)

: - 3 pin15 amp. plug point with 4 sq mm PVC insulated Copper conductor cable- including earthing the 3rd. pin etc. Medium Point 31.38 (VIII) (b)

: - Long point. (c)

12: - Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe . Size 1.5 sqmm ( 3/0.81 ) 31.40 (i)

: - Size 2.5 sqmm ( 3/1.05 ) 31.40 (ii)

: - Size 4 sqmm ( 7/0.85 ) 31.40 (iii)

: - Size 6 sqmm ( 7/1.05 ) 31.40 (iv)

13: - Supply and erection of Double door sheet steel enclosure distribution boards suitable for MCB's & ELCB's recessed in wall including bonding to earth complete with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 12-way , SP&N ( Horizontal) 31.41 (iii)

14: - Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work. 25 mm dia. 31.44 (ii)

15: - Supply and erection of MS Saddle and clamps duly galvanised , on wall / RCC parapit for fixing underground cable at a distance of 0.60 metre center to center fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect and upto entire satisfaction of the Engineer-in-charge of work. 31.48

16: - Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Delux model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection etc. up to the entire satisfaction of the Engineer-in-Charge of the Work. 31.55

17: - Supply and erection of module case circuit breaker single pole/ 4 pole on wall /on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 63 amp 31.69 iv

18: - Supply and erection of metal clad bus bar chamber made from 1.6 mm thick M.S.sheet fixed with rag bolts on wall or on existing pedestal / angle iron frame including bonding to earth Copper bars 63 amp. 415volt 4 bars of 325mm each (Cross section 20x3mm) duly tinned over all size of the chember 375mmx295mmx140mm. 31.76

19: - Supply and erection of MS box of size 8'' x 10'' x 4'' (20cmx25cm) and 10cm deep made of 1.6mm thick M.S. sheet covered with 5mm thick bakelite sheet for fixing of 4 Nos. socket and switch of 6 amp. and one No. of multi socket and switch of 15 amp. including fixing of one No. fuses unit and indicator off another make. the M.S. box is recessed in wall including cost of necessaru cement and mixture required to complete the job in all respect upto entire satisfaction of the Engineer-in-charge of work. NS

20: - Supply and erection of 72W LED Streetlight Luminaires with Pressure die cast aluminium housing with lens and accessories required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work. (Make as per approved list attached). NS