Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.1 LAccepted-AOC | L1 | Accepted-AOC Awarded as first lowest bidder (L1) | |
| 2 | L2₹16.0 L+₹1.9 L (13.7%)Rejected-AOC S 15 SACRED WORLD OPP SACRED HEART TOWN WANWADI PUNE 411040 | PUNE | MAHARASHTRA | 411040 | L2 | Rejected-AOC Being second lowest bidder(L2) | |
| 3 | L3₹17.3 L+₹3.2 L (22.8%)Rejected-AOC PURSHOTAM PLAZA 4TH FLOOR OFFICE NO 3 2 9 AND 2 5 BANER ROAD BANER PUNE 411045 | PUNE | PUNE | MAHARASHTRA | 411045 | L3 | Rejected-AOC Being third lowest bidder(L3) |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
27 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GERD PASHAN PUNE
GERD PASHAN PUNE
REPAIRS AND MAINT OF ROADS AT TECHNICAL AREA I II AND III AND PERIMETER ROAD RANGE AREA OF ARDE UNDER AGE BR PASHAN
2022_MES_566037_1
GERD/PSN/TOKEN/41 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
GERD PASHAN PUNE
As per tender documents
9 documents required · 9 mandatory
₹500
GERD PASHAN PUNE
₹50,000
Yes
13 Jan 2023
29 Nov 2022
30 Dec 2022
29 Nov 2022
27 Dec 2022
13 Dec 2022
29 Nov 2022 - 6 Dec 2022
Amount
Repair to pot holes n. exc 1 Sqm each including sweeping free from dust and mud or water, scoring sunken in roads, paths etc cutting around edges to at least 25mm in depth, making good by applying tack coat using paving bitumen @ 5 kg/10 Sqm putting in pre-mixed bituminous macadam, well rammed sealed with binder with paving bitumen grade VG -30 9.80 Kg per 10 Sqm blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadum binder and chipps) and depth of pot holes exc 30mm complete all as specified and as directed by Engineer -in-Charge.
Material and labour for scarifying or picking gravelled macadam or bituminous macadam surfaces, exceeding 50mm but n. exc 100mm depth,area not exc 400 Sqm. complete all as specified and directed by Engeneer in Charge.
Material and labour for water bound macadam 75mm compacted thickness in single layer , with broken stone garading 3, 50 mm to 20mm size, spread, rolled and consolidated to gradient and camber required including necessary lateral support and formwork if required, using curshed stone coarse aggregate (grantie / trap / basalt) and well rammed and rolled using 8 to 12 tonne power roller, complete all as specified and directed.
Material and labour for preparation of unsurfaced water bound macadam surfaces with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bag to remove all loose dirt etc, and including applying evenly a priming / tack coat with paving bitumen of grade VG-10 at the rate of 10kg per 10 sq.m, complete all as specified and as directed.
Material and labour for Premix bituminious macadam with binder content paving bitumen of grade VG30 at the rate of 4% by the weight of total mix laid /rolled and compacted to required gradient and camber consolidated /compacted thickness n. exc 50 mm complete all as specified and as directed.
Material and labour for applying evenly a priming/tack coat with paving bitumen (VG-10 grade) @ 5Kg/10Sqm with mechanical sprayer on black top surfaces complete all as specified and directed.
Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dust & dirt etc. including draining off water if any from pot holes, complete all as specified and directed.
Material and labour for applying evenly a priming/tack coat with bituminous primer (VG-10 grade) @5Kg/10Sqm with mechanical sprayer on black top surfaces complete all as specified and directed.
Material and labour for premixed semi dense asphaltic concrete 30mm thick consolidated thickness, using combined graded aggregate i.e. crushed stone coarse aggregate, fine aggregate (sand) & filler (inherent filler/OPC 43 grade) of physical properties as specified and as per table given (to refer SSR Part-I of 2020), pre-heated mixed with 5.5% binder content by weight of total mix using VG-30 grade bitumen, laid with mechanical paver, rolled & compacted to a uniform smooth surface with 8 to 10 tonne power road roller, complete all as specified and directed. Notes:- (i) Thickness of semi dense asphaltic concrete and quantities of materials as mentioned in particular specifications/SSR are the minimum. The quoted rate shall also be deemed to include for provision of more materials in comparison to those mentioned/specified in the item, if required, to achieve the required level, gradient, camber and shape all as directed by the GE. (ii) Hot mix plant of adequate capacity shall be used for heating and mixing stone and fine aggregate and binder (bitumen) and semi dense asphaltic concrete shall be laid in single layer with self propelled mechanical paver all as directed by the GE. (iii) Contractor’s quoted rates shall be deemed to include all these aspects.
Material and labour for painting 2mm thick of thermoplast fluorescent paint colour white or golden yellow or any other shade conforming to BS standard 3262 with 20% glass beads (inter mixed) applied hot with automatic(commercial) machine drive in strips after preparation of surfaces as per manufacturer’s instructions & according to the specifications laid down by IRC & MOST (Ministry Of Surface Transport)- Specifications 2001 (4th revision), making lines, broken lines/dashes, arrows etc. on roads and other like surfaces not exceeding 10cm in width or girth, complete all as specified and directed.
Supplying and Fixing in repair of Molded Shank Raised Pavement Markers/Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with microprismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTMD4280 Type Handcomplying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97DOIII Dt 11.06.1997. The height, width and length shall not exceed 50mm,100mm and102+/-2mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35+/-5 degree. The strength of detachment of the integrated cylindrical shanks (of diameter not less than 19+/-2mm and height not less than30+/-2mm) from the body is to be a minimum value of 500Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as specified and directed by Engineer-in- charge. Note:- 1. Make:- 3M/Tata BP solar/SA traffic safety kolkata/Bons light Pvt Ltd Ahmedabad/Asian controls Mumbai 2. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel to the Engineer-in-charge.
Supply and fix in repair solar stud of size 125x125x85mm I red / yellow/ orange colours made out of aluminium housing and precast construction solar powered by SIMENS monocrystal solar panel 2V 120mA type of battery NI-CD with 2Hz EL-805-3pieces each side on 2 ends total 6 pieces LEDs, flashing up to 12 Hrs of light at night and solar battery automatically charge in day/ sun light duly fixed with cement and hardner complete all as specified and directed. Make - DARK EYE / 3M/ TATA / BP or equivalent.
Supply and fixing in repair, ABS speed breaker/rubber rubmler of height 50mm and of size 350mmx250mm each in two colours (black & yellow), fixed alternately with reflectors on either side complete fixed with epoxy and bolts 6mm dia, 75mm long fasteners by drilling as per manufacturer's instructions, complete all as specified and directed. Make:- Model No. DA 1005 of dark eye or equivalent in 3M/Tata BP solar/Oscar/Avery dennison alexis/sharp eyez
Supply and Installation in repair of Road delienators (Roadway Delienators)as per MORT&H clause 806. The structure shall be manufactured in roll forming process and shall have height not less than 800mm above the ground, width not less than 100mm and shall extend not more than 300mm below the ground while being installed in confirmation with IRC:79 1981 or as directed by engineer-in-charge. The delineator shall be painted with powder coat of minimum 40 microns thickness for protection against corrosion, on top of which Type XI retroreflective sheeting shall be pasted on both sides. The delienator shall consist minimum retroreflective unit exposed are of 330cm 2 white color, full cube corner microprismaticnon-metallic retroreflective sheeting on each side conforming with IRC672012 and meeting the coefficient of retroreflection values as per ASTMD4956 Type XI table specification. The front and back faces of the delineator should be curved with a radius of not more than 200mm and with deltaangle (or central angle of curve) lying between 20° and 30°, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have grooves across the length to make the reflective sheets vandal-proof complete all as specified and directed. Make - 3M / Dark Eye / Avery Dennison / Equivalent
Providing and fixing in repair 24" convex mirror in repair, polycarbonate 24" orange body including MS plate for fixing of convex mirror etc. complete all as specified and as directed by Engineer-in-Charge.`
Demolition of cement concrete (unreinforced), in ground floor and paving (below or above ground level), not exceeding 15cm thickness, including removal of rubbish outside MoD land, complete all as specified and directed.
Material and labour for 100mm thick plain cement concrete (1:4:8), type D-2, using 40mm graded crushed stone aggregates, as in sub base, complete all as specified and directed.
Demolition Stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortor including removal of rubbish outside MoD land, complete all as specified and directed.
Material and labour, factory made, precast concrete, machine pressed, interlocking paver block any shape and size, ISI marked, IS-15658-2006, of 80mm thickness, M-40 Grade, with grey cement and pigment, and joints filled with fine sand including 50mm thick sand cushioning complete all as specified and directed.
Material and labour for factory made precast chequered cement concrete tiles, size 30cmx30cmx22 to 25mm, hydraulically pressed, different colours, glossy finished, set jointed in neat cement slurry and pointed with white cement and coloured pigment to match the surface including 20mm thick screed bed, in CM (1:6) , complete all as specified and directed.
Material and labour for 100mm thick Plain Cement Concrete (1:2:4) type B-1 using 20mm grade crushed stone aggregate as in road side interlocking, stops including use and waste necessary form work, complete all as specified and directed.
Material and labour for Factory made, 100mm thick precast kerb stones made of cement concrete (M-20 Design Mix) using 20mm graded crushed stone aggregate, 300mmx300mm compressed & hydraulically pressed, tapered/curved on one edge at top, laid on edge with and including 15mm thick and 100mm wide bedding layer of sand and pointed in cement mortar (1:4) vertically on sides of paths/road/ , complete all as specified and directed.
Material and labour for PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete to kerb stone complete all as specified and directed.
Material and labour for applying two coat of exterior water emulsion paint over a coat of primer on newly laid kerb stone surface, complete all as specified and directed.
PAVEWAY CONSTRUCTIONS PRIVATE LIMITED
MOHANLAL MATHRANI CONS. PVT. LTD.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .