ADDITION ALTERATION AND SPECIAL REPAIRS TO BLDG NO P 345 AUX TRAINING WING AND ADDN ALTN IMPR TO BLDG NO P 332 GODAVARI BLOCK AND P 21 F BLOCK AT INS SHIVAJI LONAVLA

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc of any height as directed by Engg-In-Charge

M&L for Rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat and finished rough to receive wall claddings/ cladding tiles complete all as specified.

S&F 16 to 18mm Dholpur stone cladding gang saw out with machine out edges, uniform colour of each stone size exceeding 0.25 Sqm area and not exceeding 0.50Sqm fixed with and including one number SS clamps (grade-202) of flat 30mm x2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment.

M&L for Rendering 20 mm thick cement plaster in two coats, first coat 12mm thick in CM 1:6 and second coat 8mm thick in CM1:4 with approved waterproofing compound on brick work /concrete sufaces finished even smooth on external surfaces of walls.

Supply only Integral water proofing compound

M&L preparation of new plastered surfaces/ complete removal of existing treatment on old plastered wall including removing fungus/ algae dirt, oil, grease and loose particles by wire brush, cleaning, washing and removing dust and cracks more than 5mm shall be sealed with "Pidilite URP" manufactured by DR Fixit or with "Plaster seal" manufactured by STP and cracks more than 2mm and less than 5mm shall be sealed with " crack X powder" manufactured by Dr.Fixit or "Plaster seal" manufactured by STP and applying primer and two coats of water proof decorative elastomeric coating of approved shade/colour complete all as specified and as directed. Note :- (i) Primer shall be "Prime seal" manufactured by DR Fixit or "Plaster seal" manufactured by STP. (ii) Water proofing decorative elastomeric coat shall be Rain coat DFT 100 manufactured by Dr Fixit or Shalicry 215 manufactured by STP. (iii) The rate of application of primer and waterproofing coat shall be as per manufacturers instructions. (iv) A time gap of eight hours shall be maintained between the application primer and each water proof coat after application of sealant. (v) Unit rate quoted shall be deemed to include for necessary scaffolding for execution of the same.

M&L for Complete removal of existing tratment on any height of wall surfaces, primng with alkali resistant priming paint and applying 2 coats of oil bound distemper on walls over a coat of 3 mm thick wall care putty on surfaces of wall.

Chipping, removing, carefully loose plasetr, concrete work by low impact Hasmmer / breaker without damaging the structure of beam, Chajjas, Slab and column off any height including necesssary scafolding etc & cleaning and disposal of malba out side the premises etc complere as directed by Engr-In-Charge. Hard concrete should not be removed by force.

Cleaning exposed reinforced bars throughly to remove corrosion scale using buffle wheel and emery cloth with water jet and allying two coats of nitozinc primer (Make : Fosroc or equivalent)

Providing 50x50x4mm welded mesh coated with anti corrosive chemical to exposed bars using binding wire all as specified and as directed.

Providing and applying structural grade epoxy latex bond coat prior to application of any type of mortarconfirming to ASTM-C-882-91 (Arizona slant shear test) to ensure bondbetween old and new c oncrete by brush applocation (Pidilite/ Fosroc/ Shalimar)

Building up the profile of structural members by using latex B2 modified air cured mortar system in damaged areas (1cement: 3 part graded clened pre packed river sand 10% latex mortar by weight of cement 0.5 w/c ratio) in 20 mm thickness including levelling profilling etc complete Make- Pidilite/ Fosroc/ Shalimar

Supply and application of rust remover / converter (rebaklense RR of M/s Fosroc chemicals India ltd or Amandur (Manufactured by GK Technocom) over the corroded reinforcement bar where ever micro concreting is required and cleaning the same after aplication incl cost of all materials rent of tools scafolding cost of brushes etc complete all as specified and directed by EIC

Supply and application of Nitozinc primer ( Manufactured by M/s fosroc chemicals India ltd) over the exposed steel from the exposed reinforcement after removing rods scales from the exposed reinforcement rods in one Sqm area including the cost of all materials ren of tools scaffolding cost of paint complete all as specified and directed by the EIC

Supplying and application of Nitcobond EP (Manufactured by M/s fosroc chemicals India ltd) epoxy bonding agent over the old concrete surfaces including the cost of all materials rent of tolls scaffolding cost of paint brush etc all complete as specified and directed by EIC

Providing additional reinforcement bars in place of more than 1/3 corroded reinforcement bars incl the charges for cutting bending placing and fixing in position using Lok-fix (Manufactured by M/s fosroc chemicals India ltd) including the cost of all materials labour cost of steel bars and scaffolding complete all as specified and directed by the EIC

Supplying and provisioning renderoc RG (Manufactured by M/s Fosroc chemicals Inda ltd) to an average thickness of 70 mm for beam and column fluid micro concrete shall be mixed with 6 mm down course aggregate and specified quantity of water and mixed using a power operated slow speed stirrer and pouring inside the form work and labour charges complete all as specified and directed by the EIC

M&L for preparation of old plastered surface of ceiling surface and applying three coats of white wash etc all as specified and directed.

M&L for Preparing old painted surfaces/ untreated surfaces of steel any description, over 10cm in width or grith, not otherwise described and applying one coats of Synthetic enamel paint complete all as specified and directed.,

Dismantling of cast iron/PVC or reinforced concrete drain pipes, jointed in cement mortor and taking out of trenches/wall if required 100/75 mm internal dia pipe complete all as specified.

S&F PVC (SWR) pipes of dia 110mm bore single socketed in any length with rubber ring joints fixed to walls with suitable GI Clamps

S&F PVC (SWR) pipe of 75 mm bore in single socketed in any length with rubber ring joints fixed to walls with suitable GI Clamps

S&F PVC (SWR) bends of 75 mm dia bore

S&F PVC (SWR) bends of 110 mm dia bore

S&F PVC(SWR) vent cowl of 75mm dia bore.

S&F PVC(SWR) vent cowl of 110mm dia bore.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 75 mm dia

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110 mm dia

S&F PVC (SWR) branch piece, single (double Y) equal or unequal 75 mm dia

S&F PVC (SWR) branch piece, double (double Y) equal or unequal for 110 mm dia

S&F PVC (SWR) bends of 75mm dia bore with access door

S&F PVC (SWR) bends of 110 mm dia bore with access door

S&F in repairs High density polythylene (HDPE) pipes 50 mm dia, of pressure rating 6 Kg/sq cm, fixed to walls, ceilings or in floors complete all as specified and as directed.

S&F for Renewing glazed wall tiles in patches, area n exc 5 sq. m. including cutting out broken tiles, removing and cleaning loose tiles, preparing bed, removing rubbish and replacing old with new tiles to match, complete with all cuttings, etc. and laying or setting, jointing and pointing new or old tiles complete

Cutting holes in brick wall or stone walls built in cement mortor for inserting hold fast and making good the disturbed portion in cement mortor 1:3 or cement concrete (1:2:4), type B1 as requried for depth of embedded portion of hold fasts or lugs measured from the face of the Jamb into the wall exc half brick & N.exc one brick all as specified and as directed.

S&F in repairs PVC Nahani trap100mm size with grating including jointing to waste pipe fixed in cement concrete type type B1 (1:2:4)

Removing building materilas such as bricks, stones, concrete, sand etc to a distance upto 15Km, beyond the lead included in the rates, including loading, unloading and stacking at the destination.

Dismantling of CGI/PGI or any type of sheet roofing any gauge and any thickness including ridge, valley gutter etc.

M/L for PCC 1: 2 : 4 type B-1 (using 12.5mm graded agg) for PCC padding on RCC roof surface finished even and smoother using extra cement all as specified and directed by Engr-in-Charge.

M&L rendering in CM (1:4) 15mm thickness on fair face of brick/concrete surfaces mixed with water proofing compound finished even and smooth without using extra cement (water proofing compound measured separately).

M&L for Priming surfaces and applying normal treatment (for moderate conditions), using glass fibre base bitumen felt, grade 2

M/L for applying oil based bituminous primer @ 0.10 Kg/Sqm providing and laying 3mm thick. APP modified water proofing membrane weighing not less than 3kg/sqm re-inforced with non woven polyester matt weighing not less than 150 gm/sqm having softening point not less than 140 degree centigrade longitudinal tensile strength not less than 650 N/Sqm, tearing strength of 180N and with thermal insulation with the mineral / graved finish on upper side and laying with torches application and with 15 CM minimum lap in both direction length wise and width wise all as specified and directed by Engr-in-charge.

M&L for prepairing of old walls and applying two coats of Oil Bound Distemper of approved make all as specified and as directed.

M&L for preparation of old plastered surface of ceiling surface and applying one coats of white wash etc all as specified and directed.

RK AND SONS CREATION

VIJAYA ENTERPRISES

SHAILENDRA B TULSANI

SAI SAMARTH ENTERPRISES

M/s RAJKUMAR MANIKRAO PATIL

seema enterprises