Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹55.0 LAccepted-AOC 1 AL SHEIKH COMPLEX 1ST FLOOR PEERBAGH CHOWK SRINAGAR PEERBAGH SRINAGAR BUDGAM JAMMU KASHMIR 190014 | BUDGAM | JAMMU AND KASHMIR | 190014 | L1 | Accepted-AOC Awarded | |
| 2 | L2₹57.3 L+₹2.4 L (4.28%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹59.8 L+₹4.9 L (8.84%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹62.3 L+₹7.4 L (13.4%)Rejected-Finance | L4 | Rejected-Finance Rejected | |
| 5 | Rejected-Technical OLD E 65 CWE AF SGR R O PARRAYPORA CHOWK NEAR SALFIA MUSLIM INSTITUTE SRINAGAR KASHMIR | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190005 | - | Rejected-Technical Firm not admitted due to firm not have appropriate category b i |
Tender Value
₹56.7 L
EMD Value
₹1.1 L
Closing Date
4 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE, HQ 133 WORKS ENGRS
HQ 133 WORKS ENGRS
PROVN OF DEFICIENT OTM ACCN UNDER STN HQ ZANGLI UNDER GE 874 EWS
2024_MES_639560_1
CWEK-63/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE 864 EWS
Class C Category a i and b i
6 documents required · 6 mandatory
₹1,000
GE 874 EWS
₹1.1 L
HQ 133 WORKS ENGRS
24 Apr 2024
29 Jan 2024
12 Mar 2024
29 Jan 2024
4 Mar 2024
20 Feb 2024
29 Jan 2024 - 9 Feb 2024
10 Feb 2024
Amount
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep for fdn etc for shafts, well, cesspits, manholes, ier holes, laying cable, Pole fdn, Stay laying of pipe etc not exceeding 10 Sqm on plan and not exceeding 1.5 mtr depth and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge.
Add to item No 01 for additional 1.50 m or part there of in depth beyond the first 1.50m complete all as specified and directed by Engr-in-Charge.
M & for PCC 1:4:8 type D2 (40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engr-in-Charge.
M & L for RCC M-30 design mix (20 mm Graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr-in-Charge.
M & L for RCC M-30 design mix (20 mm Graded aggregate) in Columns, pillars, piers, posts and struts concrete complete all as specified and directed by Engr-in-Charge.
M & L for RCC M-30 design mix (20 mm Graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engr-in-Charge.
M & L for RCC M-30 design mix (20 mm Graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge.
M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engr-in-Charge.
M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed by Engr-in-Charge.
M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed by Engr-in-Charge.
M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engr-in-Charge.
M & L for TMT mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.
M & L for TMT mild steel bars 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.
M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge.
M & L for brick work with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed by Engr-in-Charge.
M & L for 15 mm thick rendering on other fair faces of brick work or concrete surfaces in CM 1:6, rendering finishes even and smooth (without using extra cement) complete all as specified and directed by Engr-in-Charge.
M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4, on external wall finished even and fair mixer with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacture and in the propartion indicated acomplete all as specified and directed by Engr-in-Charge.
Supply only integral water proofing compound complete all as specified and directed by Engr-in-Charge.
M & L for preparation of newly plastered or unplastered surfaces and applying two coats of distemper oil emulsion white tinted complete all as specified and directed by Engr-in-Charge.
M & L for preparation of newly plastered or unplastered surfaces and applying two coats of cement base paint complete all as specified and directed by Engr-in-Charge.
M & L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed by Engr-in-Charge.
S & F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
S & F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
M & L for 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. framework with screws of minium size 605 x 605 mm as in ceiling complete all as specified and directed by Engr-in-Charge.
M & L for Anodised aluminium snap grid frame work of grid size 605 x 605mm for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engr-in-Charge.
M&L for preparing new plastered or unplastered surfaces of wall and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.
M L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, watered and rolled/rammed to a true surface complete all as specified and directed by Engr-in-Charge.
M L for Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed by Engr-in-Charge.
M&L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base for floor finieshes all as specified and directed by Eng-in-Charge
M&L for cement concrete 75 mm thick, type C-2, 1:3:6 (20mm graded aggregate) as in plint protection/path finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for colour joint free non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match in neat cement slurry and pointed in white or colured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.
M&L for colour joint free non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match in neat cement slurry and pointed in white or colured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.
M&L for colour joint free Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surface such as skirting, dados, risers to steps, etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.
M & L for Ist or premium or standard quality of glazes, ceramic “coloured” tiles of premium or first quality of size 350x250x7/450x350x7 mm thick as in vertical surface suck as skirting/daddo etc set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick in 1:4 cm backing coats etc complete all as specified and directed by Engr-in-Charge.
M&L Pressed steel frames size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed by Engr-in-Charge.
M&L 35 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.
S&F 35 mm thick second class hardwood glazed and Skelton door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered beads for securing glass/ gauge complete all as specified in SSR Pt I-1991 section 8 clause 8.20 (a) complete all as specified and directed by Engr-in-Charge.
S&F solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube, supplying and fixing in opening as per manufacturers instructions drawings and specifications complete all as specified and directed by Engr-in-Charge.
S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2020 and as directed by Engineer-in-Charge.
S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Eng-in-Charge.
S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed by Eng-in-Charge.
S & F Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and directed by Eng-in-Charge.
S & F MS work bands, straps, hold fasts and similar small articles conforming to Fe 290 Gde complete all as specified and directed by Engr-in-Charge.
M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in hold fasts including necessary use and waste of form work complete all as specified and directed by Engr-in-Charge.
M&L for PCC 1:3:6 type C-1 (using 12.50 mm graded stone aggregate) as filling in pressed steel door frame complete all as specified and directed by Engr-in-Charge.
S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-Charge.
S&F aluminium handles 150 mm size cast type, anodised complete all as specified and directed by Engr-in-Charge.
S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge.
S&F 125 mm size butt hinges, medium weight, cold rolled etc complete all as specified and directed by Engr-in-Charge.
S&F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed by Engr-in-Charge.
S & F 3000 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed by Engr-in-Charge.
S & F for clean sawn 25mm thick 2nd class softwood with butt joints boarding, fixed with nails in any situation complete all as specified and directed by Engr-in-Charge.
M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed by Engr-in-Charge.
M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed by Engr-in-Charge.
S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.
S & F 4mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area not exc. 0.5 Sqm in each pane complete all as specified and directed by Engr-in-Charge.
S & F 4mm thick frosted, on one side sheet glass ordinary quality and glazing with oil putty or wooden beads in square area not exc. 0.5 Sqm in each pane complete all as specified and directed by Engr-in-Charge.
M & L for 15mm bore, steel water tubing medium grade, ISI marked galvanized with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.
M & L for 20mm bore steel water tubing medium grade, ISI marked galvanized with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.
S & F 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engr-in-Charge.
S&F 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210gms) complete all as specified and directed by Engr-in-Charge.
S & F 15mm bore CP bib taps fancy type long body, half/full turn, screwed down for iron pipes complete all as specified and directed by Engr-in-Charge.
S& F pillar taps ,cast copper alloy with capstan head CP screewed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts 15 mm bore complete all as specified and directed by Engr-in-Charge.
S & F 15 mm bore CP stop cock/angle valve cast screwed down, high pressure, with crutch or butter fly handle, for iron pipe or for unions complete all as specified and directed by Engr-in-Charge.
S & F 15mm bore concealed stop valve fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for unions pipe complete all as specified and directed by Engr-in-Charge.
S & F vitreous china wash basin, white flat back size 550x400mm excluding chain and plug and porcelain stopper but including brackets all as specified & directed including 32mm bore CP based fittings and PVC waste pipe suitable for 32 mm bore complete all as specified and directed by Engr-in-Charge.
S&F vitreous china squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe,CI trap 100 mm Bore of pipe etc complete all as specified and directed by Engr-in-Charge.
S&F 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including bracket complete all as specified and directed by Engr-in-Charge.
S&F PVC connection 600mm long with check nut etc complete all as specified and directed by Engr-in-Charge.
S & F fancy type brass chromium plated shower rose with arm complete all as specified and directed by Engr-in-Charge.
S & F tubular towel rail of brass chromium plated, 20 mm dia, 'D' type, 60 cm long between flanges complete all as specified and directed by Engr-in-Charge.
S & F 100 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall complete all as specified and directed by Engr-in-Charge.
S & F 100 mm bore bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engr-in-Charge.
S & F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.
S & F 75 mm bore PVC (SWR) bends with access door any radius complete all as specified and directed by Engr-in-Charge.
S & F PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.
S & F PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.
S & F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed by Engr-in-Charge.
S & F rotational moulded polyethylene water storage tanks ISI marked capacity of 1000 ltr (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-Charge.
S & F 100mm cast iron sanitary connection socket to fit WC out-let and fixed in position complete all as specified and directed by Engr-in-Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed by Engr-in-Charge.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out from soft/loose soil complete all as specified and directed by Engr-in-Charge.
Hardcore of gauge of Broken stone or Boulder n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge.
M&L for 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in sub base for floor finishes all as specified abd directed by Eng-in-Charge
M&L for Chequered cement concrete tiles 20cm x20cm x 25mm thick,with grey cement and pigment set, jointed and pointed in neat cement slurry in floors including 15 mm thick screed bed in CM 1:6 all as specified and directed by Eng-in-Charge.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engr-in-Charge.
M&L PCC 1:3:6 type C2 (using 40mm graded aggregate) as in fdn complete all as specified and directed by Engr-in-Charge.
Walling of random rubble masonry uncoursed, well bonded, bedded and solidly hearted built in CM 1:4 complete all as specified and directed by Engr-in-Charge.
Cement concrete 1:2:4 type B1 (using 20 mm graded agg) as in coping including form work complete all as specified and directed by Engr-in-Charge.
Extra over walling hammer dressing with mix depositing on face from straight edge held against the dressed surface n. exc 40mm dpression granite or trap stone complete all as specified and directed by Engr-in-Charge.
M&L rendering 20 mm thick in cm 1:4 on on stone masonry surfaces complete all as specified and directed by Engr-in-Charge.
Extra for forming fair finished drain or channel 30cm inner girth in cement cocrete using extra cement including forms moulds, mitred /stopped ends etc complete all as specified and directed by Engr-in-Charge.
Brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.
M & L for Reinforced concrete pipes150 mm dia, class NP3, laid and jointed complete with collars complete all as specified and directed by Engr-in-Charge.
M&L 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces on wall, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M & L for precast RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in cover slabs and the like including providing necessary form work etc, set in cement mortar (1:4) complete all as dspecified and as directed by the Engineer-in-Charge.
On site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 20 users with upflow filter including media. complete all as specified and directed by Engr-in-Charge.
Construction of soakage well (brick masonry) of 1.8m internal dia and 3.00m deep below inlet level including necessary earth work filling with brick bats of guage 40 to 60mm, SWG inlet pipe junction 150mm bore including all other relevent works, complete all as specified and directed by Engr-in-Charge and shown on drawing CESZ/TD-2015.
M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified and directed by Engr-in-Charge.
M&L for Brick covering with equal to length of brick as mechanical protection to cable with well burnt sub class 'B' bricks laid complete all as specified and directed by Engr-in-Charge.
Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core ISI marked complete all as specified and directed by Engr-in-Charge.
Supply and fixing of GI Tubing medium grade of 40mm nominal bore of pipe in trenches/under roads/ under culverts/under paths/under flooron walls/with pole in new position with screwed sockets jointsto gether with all tube fittings complete all as specified and directed by Engr-in-Charge.
Material and labour for earthing of machinery/equipment at power house/ sub station complete with galvanised steel earth plate electrode 60cmX60cm X6.0mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not less than 1.5mtr below normal ground level connected to GI earth strip of size 32x6 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron complete earth pit of PCC shall be Completed all as specified and directed by 1:3:6 type C1 using 20 mm graded start aggregate, 50mm thick earth pit cover of precast RCC (1:2:4) type B1 using 20 mm graded stone aggrate with MS TMT reinforcement of 8mm dia @ 150mm centre to centre both ways, MS handle 10 mm dia made to shape with fair finish internal surface of concrete chember shall be 15mm thick plaster in cm 1:4 funnel fire mesh with wire gage of (0.68) 8 mesh per liner inch and 20 mm bore GI water pipe light grade and 40 mm bare light grade of GI pipe for protection for earth wire/strip from plate to main switch board, common salt, charcoal dust and including all excavation/earth work & connecting the earthing to an earthing point/transformer/ neutral/ body/LT Panel etc and testing on completion complete all as shown in electrical plate No 3 of MES SSR Part-I and maleing good the disturbed surfaces of wall, floors etc without claiming any extra cost as all completed and specified/directed by Engr-in-Charge. NOTE: The quoted rate of earthing shall be deemed to included cost of 7.5m long galvanised earth strip 32x6 mm and protection pipe of 40 mm bore medium graded ,GI light graded 20mm bore watering pipe.
Lagging to pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 for 20 mm dia pipeline complete all as specified and directed by Engr-in-Charge.
Cutting of Existing GI Pipe of Size 25/40/50 mm dia and and threading of existing pipe with die set comple and fitting of GI Tee for suitable size for fixing of GI pipe 20 mm bore complete all as specified and directed by Engr-in-Charge.
M&L Point wiring with 1.5 Sq. mm (nominal area) HR-FRLS PVC insulated and unsheathed multistranded copper conductor cable 1100 Volts grade drawn through and incl PVC rigid concealed conduit (ISI Marked) suitable size with all accessories having thickness not less than 1.8mm incl sheet steel/ CI terminal box of adequate size having thickness not less than 2mm including 3mm thick hylem/masonite sheet including 1.5 Sqmm FRLS PVC insulated unsheathed copper conductor multistranded cable of green colour as earth conductor connected to common earth dolly complete all as specified and directed for one light / fan point controlled by one switch 5 Amp, SP, one way, 240 Volts. Note: 1. Connections of cable with MCBs/Switch Sockets shall be done through proper size copper/brass thimbles. 2. Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit in not feasible. 3. Proper colour code will be used for wiring as per the electrical rule and complete all as specified and directed by Engr-in-charge.
All as per Srl item No 108 here-in-before but for one 5 pin 5 Amp socket outlet point on inependent board controlled by one switch SP, one way 5 Amp, 240Volts complete all as specified and directed by Engr-in-charge.
(b) All as per Srl item No 108 here-in-before but for one 5 pin 5 Amp socket outlet point on same board controlled by one switch SP, one way 5 Amp, 240 Volts complete all as specified and directed by Engr-in-charge.
M & L for point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor HR-FRLS cable with in and including PVC concealed conduit heavy duty 20mm dia having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface finishing the surface to match with the existingsurface complete all as specified and directed by Engr-in-charge. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained.
S & F switch piano flush button single pole one way 5 Amp AC 240 volts, Complete all as specified and as directed by Engr-in-Charge.
S & F switch piano flush type one way 15 amps SP 240 volts Complete all as specified and as directed by Engr-in-Charge.
S & F socket outlet 2 in 1, 3 pin, 5 and 15 amps flush type 230 volts Complete all as specified and as directed by Engr-in-Charge.
S & F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings Complete all as specified and as directed by Engr-in-Charge.
M & L for ceiling rose, PVC/Polycarbonate, insulated body, surface Bakelite 65mm dia three terminals Complete all as specified and as directed by Engr-in-Charge.
Supply and fixing of ceiling fan regulator electronic socket type 5 stage speed variation ISI marked Complete all as specified and as directed by Engr-in-Charge.
S & F LED Bulb, B22 type ,14 watt, Complete all as specified and as directed by Engr-in-Charge.
M & L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing MS ventilating fans Single phase, 230 volts 300 mm or complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge.
S&F distridution board iron clad vertical DB double door with IP-43 protection and mechanical strength as IK-09 suitable for MCCB as incomer an MCB as outgoing 415V 3Phase 50Hz 4 Way complete with appropriate size of copper bus bar and neutral link complete with one MCB TPN 4 Pole 415V 100 Amps rating,16kA with adjustible thermal and adjustible magnetic release of the same make as of distribution board Complete all as specified and as directed by Engr-in-Charge. Note: (MCBs will be measured and paid saperately)
S & F of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed by Engr-in-charge.
S&F MCB SP 240V, 50Hz, 10 KA, 'B' curve of rating 6 to 32 Amp complete all as specified and directed by Engr-in-charge.
S&F MCB SPN 240V, 50Hz, 10 KA, 'B' curve of rating 6-32 Amp complete all as specified and directed by Engr-in-charge.
S&F MCB Isolator Four pole 240V, 50Hz, 10 KA, 'B' curve of rating 63 Amp complete all as specified and directed by Engr-in-charge.
S&F 20W surface / wall mounted batten LED luminair, extruded aluminium housing with PC diffuser and ind electronic driver with high efficiency long life, CRI = 80 (Minimum), PF > 0.95, luminous efficacy > 100 lumens/Watt operating voltage 140V-240V, CCT (K) > 6500, THD < 10% complete including 20W LED tube rod with all accessories internally prewired and including connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and directedories prewired and including making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete
S&F in replacement sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long of same make having ballast , bipin holder, connector block etc. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as specified and directed by Engr-in-charge.
S&F in replacement Energy saving, surface mounted, bulk head LED luminaire 10 W with PDC aluminium housing and polycarbonate diffuser with IP 66 protection complete including connecting up with three core twisted flexible copper conductor cable of suitable size. complete all as specified and directed by Engr-in-charge.
Supply and fixing,testing and connecting the star rated ceiling fan 230 volts,single phase of 1200mm sweep double bearing type with including down rod,canopy cover etc and connecting with 3core flexible copper conductor of 0.50 sq mm and including writing of MES No with black enamelled paint complete all as specified and directed by Engr-in-charge.
M&L for sub Main Wiring with 2 run of single core, 6 Sqmm HR- FRLS PVC insulated and unsheathed, multi starndedcopper conductor cable using colour code for phase red and neutral black with and including 6 Sqmm FRLS PVC insulated and unsheathed copper conductor cable in green colour as earth conductor connected to common earth dolly, drawn in and including concealed PVC rigid conduit of suitable size having thickness not less than 1.8mm (ISI marked) with and including all accessories complete and making good to disturbed surface of wall/floor with cement mortar and finishes to match existing surface including taking down of existing unserviceable surface/cocealed sub main wiring any type complete all as specified and directed by Engr-in-charge. Note: Two run of submain wire (phase and neutral), and one run of earth including PVC conduit and accessories will be measured as one run.
S & F bldg secuirty light fitting energy saving high efficiency LED street light fitting 30 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia bent to shape having length on less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage.
S&F Storage type Electric water heater (Geyser) capacity 50 litrs BEE 5 Star rating with complete accesoiries complete all as specified and directed by Engr-in-charge.
S&F stop valves, cast copper alloy, screwed down, high pressure with crutcher butterfly handle, screwed both ends for 15mm bore dia of pipe complete all as specified and directed by Engr-in-charge.
S& F Bib taps cast copper alloy, with crutch of butter fly handle, screwed for 15mm dia pipe complete all as specified and directed by Engr-in-charge.
S&F PVC connection for hot & cold water 15mm dia 450 mm long with brass adaptors complete all as specified and directed by Engr-in-charge.
Material and labour for earthing of machinery/equipment at power house/ sub station complete with galvanised steel earth plate electrode 60cmX60cm X6.0mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not less than 1.5mtr below normal ground level connected to GI earth strip of size 32x6 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron complete earth pit of PCC shall be Completed all as specified and directed by 1:3:6 type C1 using 20 mm graded start aggregate, 50mm thick earth pit cover of precast RCC (1:2:4) type B1 using 20 mm graded stone aggrate with MS TMT reinforcement of 8mm dia @ 150mm centre to centre both ways, MS handle 10 mm dia made to shape with fair finish internal surface of concrete chember shall be 15mm thick plaster in cm 1:4 funnel fire mesh with wire gage of (0.68) 8 mesh per liner inch and 20 mm bore GI water pipe light grade and 40 mm bare light grade of GI pipe for protection for earth wire/strip from plate to main switch board, common salt, charcoal dust and including all excavation/earth work & connecting the earthing to an earthing point/transformer/ neutral/ body/LT Panel etc and testing on completion complete all as shown in electrical plate No 3 of MES SSR Part-I and maleing good the disturbed surfaces of wall, floors etc without claiming any extra cost as all completed and specified/directed by Engr-in-Charge. NOTE: The quoted rate of earthing shall be deemed to included cost of 7.5m long galvanised earth wire 4.0 mm dia and protection pipe of 40 mm bore medium graded ,GI light graded 20mm bore watering pipe.
M/S GAFFARA CONSTRUCTION CO
POPULARHARDWARESTORE
M/S AB AHAD RATHER
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .