Repair/replacement of hard standing path, fencing and misc B/R Wks at 150 TA under GE (West) Delhi Cantt-10

Dismantling/ demolition posts or struts embedded in soil or concrete etc (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground Complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for Complete all as specified and directed by Engineer-in-Charge.

Excavation in post holes (or similar holes) n exc 0.5 cum getting out in any type of soil returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm and covering and removal of surplus soil n exc 50m and making good surface Complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete Complete all as specified and directed by Engineer-in-Charge.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting, etc including embeding in concrete and similar work conforming to Fe-290 Gde-E-165 Complete all as specified and directed by Engineer-in-Charge.

S&F 23-25mm factory made single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali approved design by Engineer-incharge which are machine 3D cut for duct/shaft covering, partitions and facades comprising of virgin Polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 56 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and GRIHA certified. Fixing on M.S (Mild Steel) frame made of required square hollow box section approved by engineer-in-charge including applying a priming coat of approved steel primer, places at grid made at 1.0 X 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S (Mild Steel) framework with priming coat shall be paid separately). The manufacturer should be ISO 9001:2015 Quality Management System Certification and ISO 14001:2015 Environmental Management Systems with in-house testing facility and should have their own manufacturing plant in India complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of syanthetic anamel paint over and including one coat of red oxide Complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated steel Surfaces of any description wood, steel, iron, concrete, brick, stone, etc., exceeding 10cm in width or girth and applying a coat of black bituminous paint complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L 15 mm thick screed bed or bedding layer for laying floor finishes of tiles CM 1:6 Complete all as specified and directed by Engineer-in-Charge.