PROVN OF TOILETS AND BATHROOM BLOCK FOR INF BN AT POST-9 AND PROVN OF TOILETS BLOCK AT POST -09 03 02 UNDER GE 873 EWS

Amount

Surface dressing n exc 15 cm deepin hard/dense soil and getting out all as specified and directed. .

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, poles struts, etc., not exceeding 10 Sqm on plan and laying of cables or pipes, not exceeding 1.5m in depth and getting out in hard/dense soil complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D2 using 40mm graded crushed stone aggregate as in foundations and filling complete all as specified and directed.

M&L for RCC M-30 (Design Mix) (20mm graded aggregates) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, slabs,under-reamed piles and mass concrete.

M&L for RCC design mix M-30 (20 mm agg ) slab supported on walls, beams and columns in floors, roofs, landing, balconies , canopies , deck slabs and in shelves and the like as per specified

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick complete all as specified and as directed.

Removing excavated material (soil) not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M&L for RCC M-30 (Design Mix) (20mm graded aggregates) in Columns, pillars, piers, posts and struts complete all as specified.

M&L for RCC M-30 (Design Mix) (20mm graded aggregates) in Beams, cantilevers,bressummers, lintels over 1.5m span all as Specified.

M & L TMT mild steel bars 10 mm dia and over ,cut to length,bend to shape required, including cranking ,bending spirally for hooping for columns,hooking ends and binding with the including mild steel wire(annealed) not less than 0.9mm dia or securing with clips.complete all as specified and directed.

M & L TMT mild steel bars 5 mm dia and over ,cut to length,bend to shape required, including cranking ,bending spirally for hooping for columns,hooking ends and binding with the including mild steel wire(annealed) not less than 0.9mm dia or securing with clips.complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work.

Formwork to soffits of suspended slab such as roof slabs, floor slab, landing and similar work; not exceeding 200 mm thick (Horizontal or sloping )

Excavating over areas, n exc 1.5 m deep and getting out in hard & dense soil all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M & L Plain, solid, straight chowkats and frames 2nd class Hardwood, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed comoplete all as specified and as directed.

M&L Precast cement concrete block masonry with solid blocks exc 10 cm in width and set in cm 1:6, type C1 1:3:6 (20 mm graded aggregate) all as specified and as directed.

M&L precast cement concrete solid building blocks or slabs exc 10cm thick (with plain or interlocking joints as directed) setting in mortar, Type C-1 1:3:6 and 20mm graded Set in Cement Mortar 1:4as half block masonry wall complete all as specified and as directed.

S&F 35mm thick 2nd class hard wood plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm thick BWP commercial; ply or 12mm thick veneered particle boards on both sides. The size of rail and style as per IS-1003 (part-I) kiln seasoned and chemicaly pressure treated.

PVC (SWR) Bore in 75mm pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n,exc 0.5 Sqm, each pane. Complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain glover PVC sheet reinforced with MS square tube in opening as per specification and drawing.

S&F factory made soilid panel PVC Door shutter 30mm thick (Stype) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4, finishing the surface fair and even Complete all as specified and directed.

M&L 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6, finsihed the surfaces even and fair without using extra cement.

M&L for rendering 5mm thick cement plaster with cement mortar(1:3)on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement.

M&L for Preparing of new plastered surface and applying two coats cement base paints over a coat of primer all as specified and directed.

M&L for Preparing of new plastered surface of wall and applying two coats distemper oil bond over a coat of primer all as specified and directed.

M&L preparing new surfaces, plastered or unplastered for ceiling and applaying 3 coat of white wash

Preparation of new surfaces of wooden surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer.

M&L 75 mm thk .PCC 1:4:8 type D2 under flooring, using 40mm graded aggregates as in sub base complete all as specified and directed

M&L for 25 mm thick cement concrete type B-0 1:2:4 (12.5 mm graded aggregate)as in sub base complete all as specified and directed

M&L for 15mm thick screed bed in CM 1:6 for receiving floor finish.

S&F coloured non skid ceramic tiles (square/rectangular) area of each tile exceeding 0.06 Sqm but n.exc 0.11 Sqm,in floors set and jointedin neat cement slurry and pointed in coloured cement to match over all as specified.

Ditto- as per item No 33 above but as in skirting over rendering 10mm thick in cement mortar 1:3

M&L for coloured glazed ceramic tiles in vertical surface 300X200X7 mm thick set and jointed in neat cement slurry over 10 mm thick rendering in CM 1:3 and pointed in white to match complete.

S&F vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P' or 'S' trap with integral foot rest of any pattern along with wc connector incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete.

S & F Vitreous China urinals size 465 x 355 x 265 mm white (minimum),bowl type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, flush pipe, grating and Union for discharge pipe alongwith fixing of 32 mm dia coupling complete

S&F for butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised 100mm long all as specified.

S&F for 150mm aluminium anodised barrel tower bolts of extruded section all as specified.

S& F for 200mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F for 125mm aluminium handles, cast type ,anodised and pattern/design as approved.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 ( using 40mm graded crushed stone aggregate) as in paving / plinth protection finished even and smooth , without using extra cement incl necessary form work complete all as.

S&F for PPR gate valves (brass insert) as per requirment of the size of 20 mm dia complete all as specified and directed.

S&F for 3 layer PPR polypylene random copolymer concealed pipes 20 mm dia SDR 7.4 (PN-16)UV stabilized and anti microbial fusion welded having thermal stability for ht & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete all as specified and directed

S&F for PVC waste pipe 750 mm long with cap of 32mm bore dia waste coupling all as specified and as directed.

S&F grating doom 100mm dia PT MT weight 25 grms all as specified and as directed.

S&F for Bib taps,cast copper alloy, chromium plated with crutch and butterfly handle ,screw down screw for iron pipe or brass ferrule of 15 mm bore & fixed complete all as specified and directed.

S&F for PVC connection 15 mm dia size with PTMT nuts of length 600 mm complete all as specified and directed

S&F PVC (SWR) 110mm dia mtr pipe single socketed ,in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F PVC 75 mm PVC (SWR) bent any redius complete all as specified and as directed.

S&F PVC (SWR) 110mm dia bend all as specified and as directed.

S&F for Pillar taps cast copper alloy with capstan heads chromium plated screw for 15 mm dia high pressure with or without letters hot or cold with long screwed shank and fly nuts complete all as specified and directed.

S&F Stop/angle cock 15mm bore, fancy type cast copper alloy chromium plated , screwed down, high pressure, with crutch or butter- fly handle, screwed both ends for iron pipe or for unions and fixed.

S&F PVC low level flushing cistern 10 ltrs capacity, white symphonic action with ball valve, float and handle including flush pipe and brackets all as specified and as directed..

M&L 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed..

S&F towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden /plastic cleats.(min weight 190 grams all as specified and as directed.

S& F for FE 410 W(gde -E- 250 ) joist ,channel, angle ,or tee sections ,fixed indipendently without connecting plates etc,(cut to ordinary length i.e, within 20 mm of te length indicate all as specified and as directed.

S&F for CP Tubular towel rail 20mm dia D type 60cm all as specified and as directed.

S & F for puff water tank 500 litres capacity, insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature -30 degree to +35 degree celcius fixed in position with all fittings over PCC platform complete all as specified and directed.

M &L Excavating in trenches, n exc 1.5 m wide and n exc 3.00 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc 3.0m deep and getting out hard & dense soil all as specified.

M&L form work to fair finshed edges of concreat flats, treads breaks in floors, window cills, concrete failings, openings in concrete walls, floor and roofs n.exe 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20 cm wide.

M&L RCC nominal mix type B1 1:2:4 (20 mm grade aggregate ) in Slabs supported on walls ,beams and columns,in floors, roofs,landings, balconies, canopies,deck slabs and in shelves and the like all as specified and as directed.

S/F 110mm PVC (SWR) pipes single socketed , in any length with rubber ring joints, fixed to walls and vent pipe as specified and directed by Engr-in-charge

S & F PVC (SWR) 110 mm bore. Vent cowl all as specified and as directed.

S & F PVC (SWR) 110 mm bore 'P' Trap all as specified and as directed.

M & L Concrete bed in 1:3:6 type C2 (40mm graded stone agg) to drain pipe of bore 150 mm including packing under ,and haunching against the sides of pipe after they laid and tested all as specified and as directed.

supply only Integral waterproofing compound.

Supply only broken bricks for loose filling ,of gauge 80mm to 150 mm graded as specified and directed

Constr of soakage well incl excavation in hard/dense soil, PCC 1:3:6 type C2,(using 40mm graded crushed stone aggregate) in foundation, hone combed masonry with top ring of M30 concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:4, RCC cover slab in M-30/ SFRC cover, inter connecting pipes of RCC/DWP complete as per Drg CESZ/TD-1078/2011 of sgeet No 01/01 filled with brick bat of size (3.00 mtr dia x 3.00 mtr deep) complete all as specified and as directed..

Plain cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes incl packing under and hauching against the side of pipes after they are laid and tested for 150mm bore SGSW pipes complete all as specified and as directed. Note-Thickness of concrete bed shall be 100mm.

S&F 150mm dia SGSW pipe laid in trenches and jointed as specified

S&F 100 mm dia cast iron soil, waste and vent pipes in any length as specified.

M&L Pre-cast RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in manhole cover slab set in CM 1:4 complete all as specified.

M&L cement concrete type B0 1:2:4 (12.5 mm graded aggregate ) in cills, steps, seismic and other similar bands, plinth courses , string courses, lacing courses, parapets and railings upto 60 cm in height, copings kneelers, apex stones, bed plates, kerbs etc all as specified and directed.

M/L for PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in benching, water troughs and the like including slightly rounded chamfered angle and throughting etc all as specified and directed by Engineer-in-Charge.

M &L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

S & F use & waste of Rough finished Square, rectangular or polygonal Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified

Rendering 15 mm thick over over RCC slab to be finished even and smooth (wirhout using extra cement ) in CM 1:3 with liquid water proofing admixture all as specified ( Liquid water proofing admixture shell paid seperately)

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface with broken stone or Boulder all as specified and directed.

M&L 100mmCement concrete type B- 2, 1:2:4 (40mm graded aggregate) 1:2:4 as in flooring 100 mm thick complete all as specified and as directed.

S&F 25mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkat

M&L 3mm Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane all as specified and as directed.

S&F butt hinge 75mm,medium weight ,cold rolled mild steel complete all as specified

S&F 100mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified

S&F 150 mm aluminium alloy, anodised ,sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet , cast or extruded section and fixing bolts and slidingbolt of extruded section or cast-aluminum alloy and fixed all as specified and as directed.

S&F 150MM Extruded aluminium alloy handles, fabricated type, anodised all as specified and as directed.

S&F 100MM Extruded aluminium alloy handles, fabricated type, anodised all as specified and as directed.

S&F 32 mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm-45gms/40mm-60 gms complete specified and directed

S&F invitreous china wash down water closet pan (pedestal pattern) white with trap including connection to existing out joint pipe, flushing pipe or cistern, antisyphonage pipe, including making good to floor etc complete all as specified and directed

S&F vitreous china washbasin, white, flat back, size 550 x 400mm, including brackets & incl 32mm bore waste fitting brass, CP for glazed ware basin etc with long screwed shanks and fly-nuts flange end bedded in red lead cement and other end fixed including pedastal for washbasin complete all as specified.

S&F PVC connections 15mm size with PTMT nuts of length 450mm as specified and directed

S&F Soap dish fixed to walls with chromium plated brass screws complete all as specified.

S&F 25 mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16)UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypro p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.

S&f Rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including making necessary arrangement for fixing inlets , outlets and over flow pipe and provision of wash out pipe etc including taking down of existing tank complete all as specified and as directed.

S&F in 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s all as specified and as directed.

M&L Liquid water proofing compound all as specified and directed

S&F 30cm long hold fast conforming to FE 290 gde E-165 of section 25x6 mm all as specified and as directed.

M&L Salt-glazed stoneware gully traps, square or round mouthed, tvpe 150x150mm with all exacavation and earthwork ,complete bed ,sourrounds , kerbs etc and cast iron grating including &jopibning through drain pipe in CM 1:2 all as specified and as directed.

S&F 25 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Providing cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 50 mm thick as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays and in between the walling and plinth protection, filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand ( all by weight).

M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge.Make:- Havells/Polycab/Anchor

(a) One light point controlled by one 5 Amps one way switch

(b) One 3 pin socket outlet 5 Amps on Same board

(c) One 3 pin socket outlet 5 Amps on independent board

M&L point wiring for power point with 4 sqmm (nominal area) copper conductor FRLS cable ( multi-stranded) PVC insulated and unsheathed cable conductor 1100 Volts drawn through PVC casing capping of suitable size(as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 2.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge.Make:- Havells/Polycab/Anchor

S & F Modular switch 1 way 6A,1 module, 240 Volts complete all as specfied and directed by Engr-in-Charge.

S&F Modular Socket outlet 6 Amp- 2/3 Pin combined 3 module flush type complete all as specified and directed by Engir-in-Chage.

S&F Modular Switch socket outlet 3 pin 6 Amp' flush type complete all as specified and directed by Engir-in-Chage.

S&F Modular Switch socket Combination 16 Amp,6 Pin,3 Module flush type Complete all as specified and directed by Engr-in-Charge.

S&F Modular white Cover plate with Frame Complete all as specified and directed by Engr-in-Charge.(6Module)

S&F Modular white Cover plate with Frame Complete all as specified and directed by Engr-in-Charge.(4 Module)

S&F Modular white Cover plate with Frame Complete all as specified and directed by Engr-in-Charge.(3 Module)

S&F Modular Metal flush box 3moduleComplete all as specified and directed by Engr-in-Charge.

S&F Modular Metal flush box 4moduleComplete all as specified and directed by Engr-in-Charge.

S&F Modular Metal flush box 6moduleComplete all as specified and directed by Engr-in-Charge.

S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge.

Supply and fixing Rechargeable LED inverter Bulb energy saver 9 W ,B22 (220-240 V) 50 hz, 6500k, fast charging 2200 mAH battery inbuild ,white color all as specified and as directed. Make- Phillips stellar bright or equivalent

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.Make:- Havells/Philips/Crompton all as specified & directed by Engr- in-charge.

S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 20W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed.Make:- Havells/Philips/Crompton or equivalent make all as specified & directed by Engr- in-charge.

S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and directed.

S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed.

Supply and fixing MCB SPN 240V, 10KA 'B' curve (40-63) Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.

15. Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm.

Supply and fixing LED Building Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed.make havells cat part No.ENDURASUNDOWNSL35WLED765PASYBOPC or equivalent make.

17. M & L for GI Pipe (medium grade,ISI Marked) 32 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer complete all as Specified and directed.

18. Supply & Fixing LED light fitting 1X10W bulkhead luminaires including LED light and driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.Make-havells Cat part No. RUGBYGENXFTS10WLED865SSYMBOPC or equivalent make.

Supply, laying,fixing, passing through pipe or laid in trenches and testing underground XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 25 sqmm 3.5 core complete all as specified and directed. Note: Cable insulation should be withstand upto -35 degree temparature

Sand cushioning to underground cables using new dry river sand laid in trenches 8cm thick below the cable and 15cm thick above the cable after laying and stretching the cable complete, punned to 18cm, complete all as specified and directed Note : Punned thickness of 18cms shall be measured for payment.

M&L Un-reinforced precast factory made concreate cable covers, class LV type-I, with flat size 250x150x40 mm Complete all as specified and directed.

M&L for cable route indicator made out of 6mm thick cast iron circular plate 6 mm thick with LT cable 1100 volts embossed and fixed to an angle iron of 40x40x6 mm with bolts, nuts and twin washers of length not less than 50cm long, embedded in PCC 1:3:6 type C1 using 20 mm grade stone aggregate of size 200x200x200 mm including painting to steel surface with one under and one finishing coat of synthetic enamel paint cover a coat of redoxide primer all as specified.

Material and labour for PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in coping of pole, including necessary form work complete all as specified and Engineer-in-Charge.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.

Supply, laying,fixing, passing through pipe or laid in trenches and testing underground XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 16 sqmm 2 core complete all as specified and directed. Note: Cable insulation should be withstand upto -35 degree temparature

S&F Water heating system/Hamam of capacity 500 Ltrs with diesel/kerosene burner of 5 inch with boiler and diesel/kerosene tank Inner sheet made of 10 SWG mild steel sheet and outer sheet shall be made of 16 SWG of mild steel sheet. Glass wool insulatiuon of 25mm thickness to be provided between outer and inner sheet. 100mm dia MS pipes is to be be fitted in centre which will act as heater. One direct water connection for input of water. Funnel for pouring water manually to be provided. One over flow pipe, 3 outputs of hot water from the boiler with bib taps to be provided. Inner chamber is to be painted with boiler paint and external steel surface are to be painted with two coats of synthetic enamel paint over a coat of red oxide incl necessary components like stands for hamam, stand for uell tank and feul pipe for connecting burner, diesel/kerosene tank etc, complete all as specified and directed by Engineer-in-Charge.

M &L for Sheet metal enclosures with socket plug top and MCBs, single pole and neutral enclosure with a 2 pin and earth plug and socket complete with one single pole MCB SP 32 Amps, 240V

S&F Socket outlet 2 in 1, 3 pin, 5A (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage.

S&F switch socket combination 2 in 1, 3 pin, 5/15 Amps, flush type (multipurpose). Complete all as specified and directed by Engr-in-Charge.

M&L for sheet metal enclosure for DBs when MCBs to be used TPN, 6 way double door with 200 Amps bus bar all as specified

M&L for MCB Havells/Anchor/Legrand, SPN, 2 pole ,240 volts,40 amp, 10 KA, 'B' curve all as specified and directed.Make :- Havells Cat No DSMSCTNF063 OR equivalent

Deduct Schedule of Credit of Rs NIL (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.

M/S GEE AAR and SONS ENTERPRISES (BID ID -3414823)

MS SHOWKAT ALIJOO (BID ID -3412732)

MEHDI ALI (BID ID -3412642)