SPECIAL REPAIR TO FLOOR WITH CERAMIC TILES SANITARY FITTINGS FIXTURES AND ROOF TREATMENT IN CERTAIN SMQs PH III AND UPGRADATION OF OMQ INCLUDING SERVENT QUARTERS AND PROVISION OF DRAINAGE SYSTEM AT AF STATION BORGAD

Amount

Taking down chowkats or frame, n.exc 1.5 sqm each with shutters (without taking off shutter from the frame) all as directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exc 1.50 & n.exc. 4 sqm in each complete all as directed.

Taking down shutters of any descrption exc 1 sqm but n.exc 2 sqm each as directed.

Taking down shutters of any descrption n exc 1 sqm each as directed.

Dismantling boarding, any description, fixed in any position with nails as directed

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as directed.

M&L for demolition of concrete(unrreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris to location outside defence land complete all as directed.

M&L for demolition of concrete(unrreinforced) of any description in any position not otherwise specifically provided for and removing debris to location outside defence land complete all as directed.

Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as directed.

Dismantling of stone slab and tiles of any description or thickness in floors or walls, aprons etc tiles laid, beded and pointed in any mortar complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed

M&L for demolition of concrete (reinforced) in any description and in any position not otherwise specifically provided complete all as directed.

M&L RCC Type B1, 1:11/2:3 using 20mm graded stone aggregate in for Shelves, Cooking plateform and similar work etc complete all as specified and as directed.

M&L for TMT bars 10mm dia. & over cut to lengths, bent to shape required hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia. All as specified and directed.

S & F 35mm thick, factory made panelled door shutter (two panel), plain, framed with 2nd class hard wood lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and stile as per IS-1003 (Part I), kiln seasoned and chemically pressure treated complete as specified and directed.

S & F 35 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc (without sash bars) fitted with cut and mitred securing beads for securing glass etc complete as specified and directed sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) complete all as specified and directed.

Supply and Fix solid PVC door frame of size 50mmx47mm made out of 10mm printed PVC sheet, edges will be painted to match with printed sheet, reinforced with MS square tube & fixing in opening including hold fast Complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2 mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification and drawing Complete all as specified and as directed.

Supply and fix MS framed work as in doors and gates of angle or other section with gusset plates, rails braces, etc complete, drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and guides) and hanging: also fastening and fixing complete all as specified and directed.

M&L 18/19mm thick Block boards, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame work as in cub borads, kitchen cabinet shutter, shelves etc, complete all as specified and directed.

S&F in repair 25 mm dia stainless steel Drapery curtain rod complete with stainless steel bracket and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified as directed.

S & F 300mm, Mild steel ordinary rat tail rod pattern springs including roller and roller plate and welding etc complete as specified and directed

S&F mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F Aluminium anosided Hasp and staple, 100mm size safety type with mild steel hinge pin including to bolt to hinge plate and fixed with screws complete all as directed.

S&F aluminium anodised barrel tower bolt of extruded section 200mm long all as directed.

S&F aluminium anodised barrel tower bolt of extruded section 150mm long all as directed.

Supply and fix Stainless steel butt hinges, 100mm heavy weight and fixed all as directed.

Supply and fix butt hinges, cold rolled mild steel , 100mm medium weight and fixed all as directed.

S & F 150 mm extruded aluminium alloy handles , fabricated type, anodised all as directed.

S & F 300 mm long aluminium alloy, anodised 16 mm dia sliding door bolt with haps , staple, bolt type and fixing clip of sheet, cast of extruded section and fixing bolt fixed all as directed.

S & F floor door stoppers of aluminium alloy body & tounge anodised with hard drawn steel spring overall length 140mm fixed complete all as directed.

Material and labour for Aluminum powder coated sliding window with aluminium powder coated three track frame of size 92mm x 32mm & 1.3 mm thick with 3 Nos sliding shutters of powder coated aluminum section (top rail bottom rail and style of size 40mm x 18mm & 1.1mm thick) screwed to walls/floor including provn of tinted sheet glass panels of 4mm thick fitted in pannels (2 Nos) and one shutter with aluminium wire cloth 0.36 mm nominal dia and width of aperture 1.40mm with and including necessary locking device, jointing cleats, glazing clips, rubber packing beading , aliminum bidding and screws etc. complete all as specified and as directed by Engineer-in-Charge..

M & L for Aluminum powder coated (Thickness of powder coating not less than 50 micron) as in ventilators and window choukat and shutter cut to size, jointed together with cadmium plated steel screws including rubber packing, aluminium beading or gasket for aluminium sections for fixing glass sheet and necessary fittings complete, screws plugs, handle, tower bolt, stay hocks etc all as specified and directed. Notes :- (i) Weight of aluminium sections shall only be measured. (ii) The supply only rate of glass sheet will be measured seperately.

M&L framed work such as grills of any design, grating etc with end of bars shoulderd and/or riveted . Welded or forged into spikes. Framedguard bars iron doors . Ladders framed baiusters , walk ways . Railings , frame work of of water tanks and ssimilar work conforming to fe410.

M&L for 25 mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as in bedding layer of floor finished the surface even and rough complete all as specified and directed.

M & L for 75mm thick cement concrete (1:3:6) type C2 using 40 mm thick graded stone aggregate as in plinth protection laid in alternate bays n exc 2.5m length finished even & fair and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed.

M&L for coloured Mat finish ceramic tiles 7 to 8mm thick (square/Ractangular) area of each tiles exc 0.11 sqm but n exc 0.18 sqm as in floors etc., laid over and including 15 mm thick screed bed of cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per item No 40 above but in skirting over 10 mm thick plaster in cement mortar 1:4 including necessary cutting of tiles as required size all as specified and as directed.

M&L Glazed ceramic coloured tiles in vertical surface 600x300x 7-8 mm/450x300 x 7-8 mm thick joint free set and jointed in neat cement slurry and pointed in white or colour cement to match laid with concept/patterns as per manufacturer catalogue over and including 10mm thick rendering in Cement Mortar 1:4 complete all as specified and directed.

M & L for 16-18 mm thick Granite any colour, work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like jointed over and including 10mm thick cement mortar 1:4 screed and pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite, incuding grinding, moulding and polishing to exposed edges complete all as specified and directed.

M & L for Machine cut cudappah stone slab 20-25mm thick over and including 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M & L brick work with sub class 'B' bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls complete all as specified and directed.

M&L rendering 15mm thick,plaster on fair faces of brick work or stone masonry or concrete surfaces in CM 1:4 including finished surfaces even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick,plaster on fair faces of brick work or stone masonry or concrete surfaces in CM 1:6 including finished surfaces fair and even complete all as specifed and directed.

M & L 10mm thick rendering in cement mortor 1:3 on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

S & F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm, white with integral foot rest and 'P' or 'S' trap, including provision of Cement concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing surface all as specified and directed.

Supply and fix in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float, handle , PVC Flush Pipe and brackets including taking down old cistern all as specified and as directed.

S&F in repairs Vitreous China wash basin (WHB), white, flat back, size 450x300mm excluding taps and plug but including Angle Iron brackets, 32 mm dia CP waste coupling, 32mm bore PVC Waste Pipe complete all as specified and directed.

S&F in repairs Sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair Brass Chromium plated Tubular Towel rail, 20mm dia, D type, 60 cm long between flanges fixed to wall complete all as specified and directed.

Supply and fix 32mm dia low density polyethylene (LDPE) pipes of pressure rating 6Kg/Sq. cm laid in floor or fixed to walls all as specified and as directed.

Supply and fix 40mm dia low density polyethylene (LDPE) pipes pressure rating 6Kg/Sq. cm laid in floor or fixed to walls all as specified and as directed.

S&F in repairs bib taps bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe etc complete as specified and directed.

S&F in repairs 15mm bore, stop valve/angle valve, chromium plated, fancy type cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in reapirs, 15mm bore, stop valve, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose 125mm size fixed to 15mm bore pipe including shower arm all as directed.

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as directed.

S&F Stainless steel Peg set (Set of 06 each) fixed with chromium plated brass screws and wooden/plastic plug complete all as specified and as directed.

Dismantling CI Pipe of any dia and any description laid in floor and wall

S&F centrifugally cast (Spun) iron soil, waste and vent pipes 100mm bore, in any length including short pieces with or without ears, with cement joints, laid in trenches or in floors complete all as directed.

S&F centrifugally cast (Spun) iron soil, waste and vent pipes 100mm bore, in any length including short pieces with or without ears, with cement joints, fixed to wall complete all as directed.

S&F 100 mm cast iron branches pieces, single (equal or unequal) ordinary or inverted (apigot or socket type) or with parallel branches with oval access doors complete all as directed.

S&F 100 mm cast iron branches pieces, Double (equal or unequal) ordinary or inverted (apigot or socket type) or with parallel branches with oval access doors complete all as directed.

S&F 100mm bore CI bend (any radius) with duck foot or heel rest with oval access doors Complete all as directed.

S&F 100mm bore CI bend (any radius) diminishing pieces or tapers (larger bore measured with oval access doors Complete all as directed.

S&F 100 mm cast iron cowl complete all as directed.

S&F in repair salt glazed stone ware gully traps of size 180 x 100 mm, square or round mouthed type "P" complete all as directed.

S&F in repair 100mm dia cast iron Floor Trap, with grating including jointing to waste pipe fixed in cement concrete type b-1 (1:2:4) all as directed.

Taking down carefully existing bitumen tarfelt, including plaster or concrete bedding up to the RCC slab of any description over the surfaces of roof, terraces including flashings and junctions of parapets/Curb walls etc and removing of the rubbish to a distance exc. 250 m but n.exc. 500 m and depositing where directed,complete all as specified and as directed.

M & L for providing cement concrete type B-O, 1:2:4 (12.5 mm greded aggregate) as in roof curve or mud stops, rounded of chamfered on edges complete all as specified and as directed.

M&L for 5 mm thick screed bed or bedding layer on RCC Roof top surface in cement mortar 1:3 mixed with Liquid water proofing admixture as per manufactrues instructiones finished the surfaces fair and even complete all as specified and directed . (Note :-Cost of WPA shall be included in this item.)

M&L for cleaning the newly plastered surfaces thoroughly with wire brushes and providing water proofing treatment all as directed and given here in after (a) Bituminious primer @ 0.3 ltr per Sqm confirming to IS 3384-1986 on roof surfaces prior laying APP. (b) Providing water proofing treatment with five layered membrane 3mm thick weighing not less than 3.5 kg/sqm APP modified bituminous membrane reinforced with non voven polyester mat of weight 160 gms/sqm as centre core applied by thermo fusion using LPG torch on the bottom portion of the membrane. (c) Applying Two coat of bituminous aluminium paint @100 gms per sqm over mebrane

M&L for Repairs to sunken floor stab with the following specification :- (a) Roughening surface of old concrete floor and wall bypicking,sweeping clean and washing down with water to remove dust etc. (b) PCC 1:2:4 type B-O using 12.5mm graded stone aggregate averaging 50mm thick as in sunken floor with proper slope towards GI spout. (c) providing 15mm thick cement plaster in cement mortor 1.3 mixed with water proofing compound @ 3% by weight of cement over bottom and vertical surfaces finishing the surface even and smooth without using extra cement. (D) Damp proof course on horizontal surfaces with scrapping and properly cleaning the surfaces to remove loose particles & applying one cot of self priming (33% dilution) and to coats of undiluted material with @ 10.67 ltr per 10 sqm smart care Damp proof of asian paint for water proofing and Damp proof course on vertical surfaces scrapping and properly cleaning the surface to remoov loose particle and applying one coat of self priming (33% dilution) and one coats of undiluded material with @ 4.85 ltr per 10 sqm smart care Damp proof for water proofing (E) Brick bats filling under sunken floor. (F) PCC 1:3:6, type C-2 using 20mm graded stone agregate 75mm thick,over brick filling as in subbase to recieve tiles including fixing of 40 mm medium grade G I spout pipe at the bottom of sunken surfaces. Note:- (i) Water proofing compound shall be measured and paid under relevent items. (ii) For payment purpose only floor area (Plan area) shall be measured. (III) Contractor will submit garantee for leakage/ seepage for 5 year after completion of work.

M & L two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc. 10cm width or girth including preparation of new or previously untreated surfaces complete all as specified and directed.

M&L for Preparation of old painted surfaces of wood and wood based of any description, not otherwise descreibed, over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing new steel surfaces of any description width or girth exc 10 cm applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome all as specified and directed.

M&L for Praparation of old painted surfaces of steel and iron of any description, over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed.

M &L for applying 3 mm thick wall care putty in two layers on newly platered surface of wall to achive smooth finish complete all as directed.

M &L complete removed existing treatment on old platered surface of wall and applying 3 mm thick wall care putty in two layers to achive smooth finish complete all as directed.

M&L for preparation of old/new plastered surfaces finished with putty of wall and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

Material and labour for preparation of newly plaster surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of old Ceiling surfaces by brooming down and applying two coat of white wash on ceiling including cornices etc complete all as specified and directed.

Material and labour for preparation of newly plaster surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of old wall surfaces and applying two coats of white wash on walls including cornices etc complete all as specified and directed.

M&L preparing new plastered/Concrete surfaces of walls and applying two coats of acrylic smooth Exterior paint of required shade @ 1.67 Ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm complete as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls by brooming down or steel wire brushing.scrapping down smoke soot.moulds.moss and efflorescent salts,trading oil and greasy spots, l etc and applying one coat of exterior acrylic emulsion paint (Weather coat) white/coloured on walls with and including provision of scaffolding , ladders, cradles etc required for the treatment to external surfaces of building with required safety measures etc complete all as specified and directed by Engineer in charge

Disconnecting existing water tanks of any description, of capacity exceeding 500 litre & not exceeding 1000 litre, setting aside for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc including writting of cleaning date on water tanks complete all as specified and as directed..

S&F Rotational moulded polyethylene water storage tanks three layers of 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing water storage tank of any description all as directed.

S&F 20mm bore Ball valves, high pressure, PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron piped and fixed in position all as specified. Make- Prayag or equivalent as approved by GE.

S&F in repairs 20mm bore Ball valves, high pressure, PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron piped and fixed in position all as specified. Make- Prayag or equivalent as approved by GE.

S&F in repairs 20mm bore Gun Metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 15mm complete all as directed.

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) bore of pipe 15mm all as directed.

Supply and fix 15mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 20mm complete all as directed.

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) bore of pipe 20mm complete all as directed

Supply and fix 20mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good , cutting not exc 10cm girth complete all as directed. Note : Work shall be executed in triple storey building

S&F 0.90 mm thick decorative laminate type1 of smooth and gloosy surface finish colour and pattern as approved, fixed with approved adhesive as per manufacturer instruction etc complete all as specified and directed.

S & F Second class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and as specified and directed.

S & F 150 mm long stainless wooden cabinet handle complete all as specified and as directed.

S&F 100 mm long stainless steel grade 304 mortice key lock set 4 lever complete all specified and direcetd

M&L for Praparation of old painted surfaces of steel and iron of any description, over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of old painted surfaces of wood and wood based of any description, not otherwise descreibed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down existing copper/aluminum point wiring (light/ fan/ socket or power points) complete including (fittings such as switches, ceiling roses, pendents, regulators, sockets, Light fitting etc including wooden battens /casing /capping and conduit etc and making good disturbed surface of walls, ceilings and floors etc. complete all as specified & as directed by Engineer-in-Charge.

Taking down carefully sub main wiring including all accessories without disturbing existing wiring fittings fixture site and making good to the disturbed surfaces all as directed and as specified in any type and size.

Taking down main switch, DB(along with MCCB/,MCB), and electric Meter etc all as directed.

M&L for Point wiring with 1.5 Sqmm (nominal area) FRLS,multistranded,medium grade,ISI mark ,PVC insulated sheathed copper stranded conductor cable run in and including concealed in wall/floor PVC medium grade conduit not less than 20 mm as per IS with all fittings such as bends, tee,junction boxes,etc of suitable size including 1.5 Sqmm, FRLS,multistranded,medium grade,ISI mark PVC insulated copper earth continuity conductor connected to common earth dolly and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc for one light/fan/call bell point controlled by one 1- way switch complete all as specified and as directed by Engr -in -Charge.(Note: Cutting and making good of chases in the wall/ Roof/ Floor including making good of disturbed surfaces and painting to match with existing touch up etc are deemed to be included in the quoted rate.)

All as per item No114 here-in-before but for one 3 pin 5 Amps socket outlet on independent board.

All as per item No 114 here-in-before but for one 3 pin 5 Amps socket outlet on the same board with other switch with 1.5 sq mm size.

All as per item No 114 here-in-before with 2.5 sq mm size cable, for one 6 pin 5/15 Amps socket outlet on independent board.

M&L wiring for circuit/ sub main wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core, 1100 v grade cable in surface as required using 2x4.0 Sqmm+1x4.0 Sqmm earth wire,cables inciuding run in stove enamelled steel Conduit medium grade of size not less than 20mm and taking down old unserviceable submain from existing position ,complete all as specified and as directed by Engineer-In-Charge (Note: 2 run of 4.0 sq mm & 1 run of 4 sq mm in stove enamelled steel Conduit of suitable size combined shall be measured & paid as one unit. Cutting and making good of chases in the wall/ Roof/ Floor including making good of disturbed surfaces and painting to match with existing touch up etc are deemed to be included in the quoted rate )

Modular switch one way 6 Amp,1 Module, complete all as specified and directed by Engineer-in-Charge

Supplying and fixing Modular socket, 6 amps-2/3 pin combined, 2 Module, complete all as specified and directed by Engineer-in-Charge

Supplying and fixing Modular switch , one way, 16 amps, one Module complete all as specified and directed by Engineer-in-Charge

Supplying and fixing Modular socket 16 amps-6 pin multipin, 2 Module complete all as specified and directed by Engineer-in-Charge

Supply & Fix Modular Fan regulator electronic step type 230 V 2 Module. complete all as specified and directed by Engineer-in-Charge

Supply & Fix Ceiling rose surface type, PVC/Polycarbonate isolated body size 50x28 mm two to three terminals. complete all as specified and directed by Engineer-in-Charge

Supply and fix Bell push Modular type,1 module, type 6 Amps.

Supply and fix Ding Dong bell AC 230 Volts single pole ,complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair LED lights fitting 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge. of make crompton, havell, wipro.

Supply and fix in repair LED lights fitting 1x10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge. Make crompton Cat No ccs-103-10-65-sl-dp-nwh or equivalent make of havell, wipro.

Supply and fix in repair LED lights fitting mirror type with high output diffuser 2 feet, 5W, 220V, AC decorative type with driver, holder including LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge.of make crompton, havell, wipro.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.of make crompton, havell, wipro.

Disconnectiing of all electrical connections of the existing ceiling fan and taking down ceiling fan (any type/ sweep) from the ceiling and removing the existing down rod of the ceiling fan and depositing to MES store yard .

M & L for Anti sucide down rod made out of GI of length 10" capable to bear weight upto 20 KG and open from centre in case of weight more than 20 Kg by spring in pipe will be expand complete including making all electrical connection of the fan and hanging of fan ceiling on its original position. Make-Gold life smart fan rod, or as equivalent complete all as specified and as directed by Engr -in -Charge.

Supply and fixing amp rating SPN 32 AMP, 240V, 10KA, 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified & as directed by Engineer in charge.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning..

Supply and fix in repair double door sheet metal enclosure for DBs when MCBs to be used single pole and neutral 8 WAY SPN DB with 200 amps rated bus bar complete all as specified & as directed by Engineer in charge.

Supply and fix in repair double door sheet metal enclosure for DBs when MCBs to be used single pole and neutral 4 WAY SPN DB with 200 amps rated bus bar complete all as specified & as directed by Engineer in charge.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) TP 25 To 63 AMP and current carrying capacity in the DB complete with connection testing and commissioning.

Supply and fix in repair glazed door sheet metal enclosure for DBs when MCBs to be used single pole and neutral 4 WAY VTPN DB complete all as specified & as directed by Engineer in charge.

Supply and fixing 415V 36KA (MCCB) as incomer of following poles and current carrying capacity in the DB complete with connection testing and commissioning. (i) TPN 100 AMP

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, including maling holes on wall & making good of disturbed surface to match with the existing, complete all as specified & as directed by the engineer-in-charge.make Havells/ usha/ CG

M&L for earthing in repair complete with galvanised steel earth plate electrode 600x600x6mm thick,burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the plate not less than 1.5 Mtr below normal ground level,connected to galvanised iron wire 4 mm as earth lead by means of bolts,nuts ,washer and check nut of galvanized steel, protected by and including GI pipe 15 mm bore (light grade) and connected to main switch / MCB DBs box point / LP test point as directed and including cement concret pit in 1:2:4 type B1 using 12.5mm graded aggregate, with cast iron miled steel frame embedded in the concrete enclouser fineshed flushed & CI cover 10 mm thick of size (300mmx300mm CI) having locking arrengment hinged to CI frame all as shown under electrical plate of SSR Pt - I 2009 and as directed including painting the external surface of chamber & cover with enamel paint in diffrent colour as directed and writing earth results & date of test carried out with white paint on black painted background, wiremesh funnel 20 mm bore GI pipe medium grade for watering adequate quantity of charcol,Bentonite and common salt in alternate layer of 15cm 3ft x 3ft thick all around the electrode including necessery excavation & earth work in any type of soil complete testing on completion all as directed. Note:- i) Filling the pit with black cotten soil brought at site.

Supplying,laying ,testing & commissioning in repair trenchs or passing through pipe, fixed to pole or as indicated at site, commissioning and testing XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor,1100 volts, grade of size 2 core 10 Sqmm, complete all as specified and as directed by Engineer-in-Charge.

M/s.TIRUPATI BUILDERS

N.U. MIRZA