SPECIAL REPAIRS TO BUILDING NO T 246 AT RONGLI UNDER GE 867 EWS

Amount

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital pattern roof covering all as specified and directed.

S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with seif tapping screws complete all as specified and as directed.

S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with seif tapping screws complete all as specified and as directed.

Dismantling of wall and ceiling boards( fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets all as specified and as directed.

S&F GI frame work of size 605 x 605mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flangesof 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and incl ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre.

S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long complete all as specified and as directed.

M&L 4mm thick asbestos cement plain building boards, fixed or laid /inserted to GI snap grid framework with screw in ceilings all as specified and as directed.

M&L three coats of white wash on ceiling on AC boards after prepration of surfaces all as specified and as directed by the Engr-in-Charge.

Demolition of brickwork or stone/boulder masonry built in cement mortor all as specified.

M & L precast cement concrete type C-1 , (1:3:6) (using 20mm graded stone aggt) block masonry with solid blocks 10cm in and setting in CM (1:6) all as specified and as directed.

M&L RCC type B-1, (1:2:4) (20mm graded stone aggregate) as in beams cantilevers, bressumers, lintels over 1.5 m span all as specified and as directed.

Formwork to sides and soffits of floor or roof beam,beam hunching, girders, bressumers,lintels, cantilevers,shelves including supports, overhangs, etc. also splays between floors and beams of fair finish surface all as specified and as directed.

M&L mild steel TMT Bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90 mm dia or securing with chip) all as specified and as directed.

All as per Sl item No-13 above but 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders all as specified and as directed.

M&L 15mm thick rendering on brick or block concrete masonry walls in cement plaster (1:6) incl finished even and smooth w/o using extra cement all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brickwork or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement including taking down cement plaster on brick or stone masonry surfaces of walls etc., including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed by Engr-in-charge.

M&L 20mm thick rendering in two layers of 10mm each on brick or block concrete masonry walls in cement plaster (1:4) with WPC incl finished even and smooth w/o using extra cement all as specified and as directed.

M&L preparation of new plastered surfaces of walls and applying two coat of OBD over a coat of chalk whiting complete all as specified and as directed.

M&L Preparation of plastered surfaces of walls and applying two coats of cement base paint over a coat of chalk whiting complete all as specified and as directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise all as specified and as directed.

M&L joint free non skid ceramic colured tiles 7 to 8mm thick, area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm, in floors etc. set & jointed in neat cement slurry over 15mm screed bed or bedding layer CM 1:6 & pointd in coloured cement to match complete all as specified and as directed.

M&L glazed ceramic coloured tiles 300 x 200mm x 7mm thick on vertical surfaces such as skirting, dados, set & Jointed in neat cement slurry over 15mm screed bed or bedding layer CM (1:4) & pointed in colour cement to match complete all as specified and as directed.

Demolition of cement concrete (Unreinforced) in ground floor and pavings n exc 15cm thick ness (below or above ground level) all as specified and as directed.

M&L for 40 mm thick cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in floors finished even and smooth using extra cement complete all as specified and directed.

M&L 75mm thick PCC type C-2, (1:3:6) (40mm graded stone aggt) as in path, plinth protection, etc., complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and as directed.

S & F Roof trusses (Framed), trussed , purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces cleats etc FE-410W (Gde E-250) quality A all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc 1.5 sqm complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm all as specified and as directed.

S&F Pressed steel door frame for doors, size 125 x 60mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S&F 35mm thick plain framed panelled shutter (any number of panels) of 2nd class H.W with panels of timber flat on both sides or of venerred particle boards medium density, wood particle board with commercial face veeners all as specified and as directed.

Solid PVC door frame of size 50mm x 47 mm, made out of 5mm plain colour PVC sheet, reinforced with MS square tube supplying and fixing in openings as per specification & drawing all as specified and as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification all as specified and as directed.

S&F Steel windows with side hung shutters incl projecting type hinges with steel handle, and steel peg stay complete with glazing bars all as specified and as directed.

S & F steel ventilator with top hung shutter, including hinges, steel peg stay, complete all as specified and directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; and similar work conforming to Fe.290.Gde-E-165 all as specified and as directed.

S&F 3mm thick sheet glass, oridinary quality and glazing with oil putty in square n etc 0.5 sqm in each pane complete all as specified and directed.

S & F 3.0 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S & F Galvanised wire cloth, 0.63 mm nominal dia of wire and average width of aperature 1.4mm and fixed with tinted tacks or galvanised wire staples as in fly proof window and door ,all as specified and directed.

S&F 250 mm long aliminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed.

S&F anodised Extruded aluminium alloy handles 150mm long, fabricated type anodised complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts, 200 mm long, of extruded section, complete all as specified and as directed.

S&F 75 mm size butt hinges, medium weight , cold rolled, mild steel and fixed complete all as specified and directed.

M&L Preparation and applying two coat of synthetic enamel paint over one coat of pink primer on new wooden surfaces, of any description, over 10cm width or girth not other wise described all as specified and as directed.

M&L Preparation and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, of any description, over 10cm width or girth not other wise described all as specified and as directed.

Demolition and breaking up 75/100/110mm old broken PVC (SWR), AC, SWG soil waste and vent pipe including accessories set in cement mortar complete all as specified and as directed.

S & F 110 mm bore PVC Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S & F 110 mm bore PVC bends any radius complete all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S & F 75 mm bore PVC bends with including for all necessary extra joints cuttings and waste to any radius complete all as specified and directed.

S & F 75 mm bore PVC (SWR) junction double, (double T), equal or unequal complete all as specified and directed.

S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking down 15mm bore steel tubing and connections, completet laid in trenches complete all as specified and directed.

S & F 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

S & F 15mm bore of tube medium grade galvanized with all fittings & fixed completet laid in trenches complete all as specified and directed.

S & F in repair 15mm bib taps cast copper alloy chromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed 15mm bore all as specified and as directed.

S & F in repair 15mm dia fencey type pillar tap, cast copper alloy, capstan heads, chromium plated, screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe, all as specified and directed.

S & F in repair angle/Stop cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions all as specified and as directed.

S & F shelf of PTMT fixed with and including chrominium plated brass screws and wooden/plastic cleats (Min wt 300 gms) all as specified and as directed.

S & F towel rail 600 mm long of PTMT fixed with and including chrominium plated brass screws and wooden/plastic cleats (Min wt 190 gms) all as specified and as directed.

S & F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect all as specified and as directed.

S & F PVC valve less, syphonic action type flushing cistern 10 ltr capacity low level, with inlet, ball valve float, flush pipe and handle including brackets all as specified and as directed.

S&F Vitreous china WHB 550x400 mm white flat back including pedestal and bracked complete all as specified and as directed.

M & L PCC (1:4:8), type D-2 conrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in 110mm dia complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified and as directed.

Disconnection and taking down distribution boards, switch fuse unit, enclosure for MCB/MCB Box including MCB's of any type and size and keeping aside for reuse of serviceable one all as specified and as directed.

M&L for Point wiring complete with 1.5 sqmm single core PVC insulated and PVC unsheathed FRLS multistranded copper conductor cable 1100 volt grade enclosed in and including PVC casing and capping with accessories fixed on surface on walls/ceiling by means of PVC sleeves, Dash fastners and cadmium plated screws including sunken junction box not less than 3.0 mm thick concealed in wall, mounting accessories like switches, sockets fan regulators with 3.0 mm thick Laminated sheet top covers etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly for the following :-

All as per item No 70 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on independent board all as specified and as directed.

All as per item No 70 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on same board all as specified and as directed.

All as per item No 70 here – in – before but for one switch socket outlet 15 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable all as specified and as directed.

Supply and fix switch piano flush button, single pole, 5 amps, one way all as specified and as directed. Make : Anchor/Havells/Plaza

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed. Make : Anchor/Havells/Plaza

Supply and fix switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5 amps flush type all as specified and as directed. Make : Anchor/Havells/Plaza

Supply and fixing switch socket combination 2 – in – one 6 Pin , 5 / 15 amps flush type universal all as specified and as directed. Make : Anchor/Havells/Plaza

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make : Havells/Philips/Crompton

S&F lamp/angle holder insulated body with back plate for batten fitting all as specified and as directed. Make : Anchor/Havells/Plaza

S & F in LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink of 12 W complete all as directed. Make : Crompton/Havells/Surya or equivalent

S&F Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 8 way 240 Volts AC all as specified and as directed. Make- Legrand or equivalent in Siemens/Schindler.

Supply and fixing MCB Single pole and neutral 40 Amps capacity 10 KA 240 Volts 50 HZ, 'C' curve all as specified and as directed. Make : Legrand or equivalent in Siemens/Schneider.

Supply and fix MCB single pole (SP), 10 kA of 5 -40 Amps capacity 240 Volts, 'C' curve. Cat part no 4085 95 of Make : Legrand or equivalent in Siemens/Schneider

S&F LED security light suitable for 20 W LED with pressure di cast housing with epoxy power coated drak graphite grey colour finish , Prismatic ploycarbonate cover with individual LED lenses, IP65 by using 25mm dai GI bracked fixed on wall by means of nuts, botls and clamps all as specified and as directed.. Make : Philips/Havells/Crompton.

M&L for Earthing in repairs complete with galvanized steel earth plate electrode 600x600x6 mm buried directly in ground (earth pit not less than 2.25m deep bellow ground level) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts, nuts, check nuts and washers and connected to equipments as directed, including funnel with GI med grade watering pipe 20mm bore, wire mesh, charcoal or coke and common salt in alternate layers of 15cm compacted thickness all around the earth electrode, with concrete pit in PCC (1:3:6) type C-1, 50mm thick pre cast RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia deformed bar 15cm C/C and suitable handle of 10mm dia round bar, GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I and all as specified and as directed.

M&L Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 Sqmm size drawn through and including not less than 20 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the concealed to wall/ceiling including one run of 6.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor all as specified and as directed. NOTE : Two runs of single core 4.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.

All as per above item No 86 but for 2.5 Sqmm all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers all as specified and directed. Bajaj /Orient/Havells.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps, 240V all as specified and as directed. Make - Legrand/Havells/Seimen

Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.

SCHEDULE OF CREDIT

SANJAY SAW MILL

DEEP CHANDRA JOSHI

MS BRAHMA CONSTRUCTION

MS MAYA PRAKASH GOEL AND SONS

SANJAY MITTAL

HEM RAJ GURUNG

MANOJ JINDAL