RequiredExperience with Government
RequiredOEM Authorization Certificate Student Desks And Benches (with Angle Iron Frame) ( 60 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Type of DESKS BENCHES INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK ONLY DESKS
RequiredONLY BENCHES
RequiredINTEGRATED DESK CUM SEATING
RequiredINTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK
RequiredONLY DESK WITH SHELF STORAGE UNDER DESK Desks/Benches Configuration TWO SEATER SINGLE SEATER
RequiredTWO SEATER
RequiredTHREE SEATER 1/5 Length of Desks
RequiredSeats and Backrest (if provided) in mm (±20 mm) 920 mm 450 mm
Required470 mm
Required900 mm
Required920 mm
Required1300 mm
Required1320 mm
RequiredONLY SEATING NO DESK
RequiredONLY DESK NO SEATING Transportations Freight charges Offer Prices are on Free Delivery at Consignee site basis. * Approval of Advance sample After award of contract - Seller shall have to get proto type Advance sample approved from Buyer before manufacturing starting Bulk supplies - Buyer shall approve provide list of modifications required within 10 days of offer of advance sample - If there is delay in approval of advance sample from Buyer side - the delivery period shall be regularized for the period of delay in sample approval. * DESKS SPECIFICATIONS Material of Desk Top 18 mm thick prelaminated Particle Board * Material for Desk Top support 1 no. horizontal support of MS Angle size 25 mm x 25 mm x 2.5 mm thick 1 no. horizontal support of MS Angle size 25 mm x 25 mm x 2.5 mm thick
Required1 no. horizontal support of MS Angle size 30 mm x 30 mm x 2.5 mm thick
Required2 no. horizontal support of MS Angle size 25 mm x 25 mm x 2.5 mm thick
Required2 no. horizontal support of MS Angle size 30 mm x 30 mm x 2.5 mm thick
RequiredONLY SEATING NO DESK Material of Support Structure for Desks or Side Pannel MS Angle of size 25 mm x 25 mm x 2.5 mm thick MS Angle of size 25 mm x 25 mm x 2.5 mm thick
RequiredMS Angle of size 30 mm x 30 mm x 2.5 mm thick
RequiredONLY SEATING NO DESK Height of Desk Top in mm (± 10 mm) 600 mm 500 mm
Required550 mm
Required600 mm
Required650 mm
Required700 mm
Required2/5 730 mm
Required760 mm
RequiredONLY SEATING NO DESK Width of Desk Top in mm (± 10 mm) 400 mm 300 mm
Required350 mm
Required400 mm
Required435 mm
Required460 mm
Required500 mm
Required550 mm
Required600 mm
RequiredONLY SEATING NO DESK BENCHES/SEATING SPECIFICATION Material of Seat and Backrest (if provided) 18 mm thick prelaminated Particle Board * Material for Seat support 2 nos. Vertical support of MS angle size 25 mm x 25 mm x 2.5 mm thick 2 nos. Vertical support of MS angle size 25 mm x 25 mm x 2.5 mm thick
Required2 nos. Vertical support of MS angle size 30 mm x 30 mm x 2.5 mm thick
Required3 nos. Vertical support of MS angle size 25 mm x 25 mm x 2.5 mm thick
Required3 nos. Vertical support of MS angle size 30 mm x 30 mm x 2.5 mm thick Material of Support Structure MS angle of size 25 mm x 25 mm x 2.5 mm thick MS angle of size 25 mm x 25 mm x 2.5 mm thick
RequiredMS angle of size 30 mm x 30 mm x 2.5 mm thick
RequiredONLY DESK NO SEATING Material of Seat Cushion WITHOUT CUSHION 40 mm thick PU foam of density 40 gram per cubic cm
RequiredWITHOUT CUSHION
RequiredONLY DESK NO SEATING Width of Seating in mm (±10 mm) 300 mm 270 mm
Required300 mm
Required320 mm
Required340 mm
Required360 mm
Required400 mm
Required450 mm
Required500 mm
RequiredONLY DESK NO SEATING Height of Seat in mm (±10 mm) 430 mm 370 mm
Required400 mm
Required430 mm
Required460 mm
Required500 mm
Required550 mm
RequiredONLY DESK NO SEATING Width of backrest if provided in mm (± 5 mm) 200 200
Required220
Required240
Required260
Required270
Required280
Required300
Required325
RequiredNo Backrest Back Support for Seating of same material as seating Provided without cushion Provided with Cushion
RequiredProvided without cushion
RequiredBack support not provided MISC Distance between 300 mm * 3/5 Tabletop edge and Seat edge in mm (+/- 5 mm) Ends of the sides To be double fold after cutting * Dressing of Components Free from crack/surface free from distortion/no burrs in holes. * COLOUR & FINISH Colour of Finish/Paint Teak wood colour * Desk top finishing Two long sides shall have post form half round profile and other two sides edge banded with 2 mm thick PVC tape with the help of hot melt glue * Logo/Marking No marking Marking to be done on desks and benches as per Buyer instructions
RequiredNo marking WARRANTY Warranty period in number of years 1 1
Required2
Required3 CERTIFICATION Test reports to be furnished to buyer's on demand YES YES
RequiredNO OEM of offered product is ISO 9001:2015 certified NO * OEM of offered product is ISO 14001:2015 certified NO * OEM of offered product is ISO 18001:2007 certified NO * * Bold specifications are the golden parameters.
