Repair and Renovation of GOs Mess at Atlanta Point. Sub Work - Repair and Renovation of Toilet and Replacement of Bathroom fittings at GOs Mess, Atlanta Point.

Amount

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge.

Decorative finish (wood grained finish)

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

Two or more coats on new work

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete.

a) Flexible pipe i) 32 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls

25 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work

25 mm nominal dia Pipes

Providing and fixing Ist quality digital ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

size of tiles 600x300 mm(digital)

Providing and laying digital Ceramic glazed floor tiles of size 600x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Size of tiles 600x300mm(digital)

Providing and fixing white white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : of size (710 x 365 x 750mm) ( Make Parryware or equivalent)

Providing and fixing Angular Stop Cock of approved quality of make Jaquar ( No. CON - 053 KN) or equivalent.

Providing and fixing Overhead shower 200x200mm square shape single flow (ABS body chrome plated with gray face plate) with rubit cleaning system of (make Jaquar or equivalent) as directed by Engineer-in-charge.

Providing and fixing CP Shower Arm 15 mm dia nominal bore, 1/2" BSP thread 195 mm long with a bend of 45° (effective length of 210 mm)

Providing and fixing Jet spray Hand Shower with 1 Meter Long Easy Flex Tube in Chrome Finish and Wall Hook (Jaquar or equivalent) of good quality as per the direction of Engineer-in-charge.

Providing and fixing of WPC shutter of thickness 18mm in washroom cabinet with Auto hinges all complete as per the direction of Engineer-in-charge.

18 mm thickness

Providing and fixing Table top wash basin of size (410x410x140mm) of make Parryware (Model No.Inslim 410 (C041K) or equalvalent with Tall Basin Mixer (pillar cock) of make parryware (model No.G3163A1) or eqavalent, CP Brass waste pipe with coupline etc. complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

a) Granite of any colour and shade i) Area of slab over 0.50 sqm

Providing and fixing Towel Ring Circular shape make of Jaquar CAN-1121BN or equivalent make of approved quality as per the direction Engineer in charge.

Providing and fixing Tooth Brush holder make of Jaquar or equivalent make of approved quality as per the direction Engineer in charge.

Providing and fixing basin pillar cock single lever basin mixer without popup waste system with 450mm long Braided hoses of make Jaquar or equivalent of good quality as per the direction of Engineer-in-charge.

Providing and fixing exposed bath and shower arragement i.e wall mixer 3 in 1 system with Proivision for both Hand Shower and Overhead shower complete with 115 mm Long Bend pipe connecting legs and wall flange (without hand & Overhead shower) of Make Jaquar or equivalent of good quality as per the direction of Engineer-in-charge.

Providing and fixing CP liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour.

Providing and fixing 600mm long CP towel rail complete with bracket fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and and colour of make Jaquar AKP-3571PS or equivalent.

Providing and fixing CP brass bib cock of approved quality of make Jaquar or equivalent.

15 mm nominal bore

Providing and fixing soap Dish Holder(Jaquar AKP-35731P or equivalent) of approved quality with concealed fitting arrangements

Providing and fixing toilet paper holder with flaped (Jaquar or equivalent ) of make and approved quality

Providing and fixing Drizzle shelves clear 14 inch long fixed in wall with necessary screws and washer etc complete as per the direction of engineer in charge.

Providing and fixing stainless tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing mirror of superior glass (of approved quality) andof required shape and size with plastic moulded frame of approvedmake and shade with 6 mm thick hard board backing :

Rectangular shape 600x450 mm

Providing and fixing C.P. two way bib cock CON 041KN of approved quality as direction of Engineer - in - charge.

15 mm nominal bore

Providing and fixing Health Faucet with 8mm dia, 1.2 meter long easy flex tube in Chrome Finish & Wall Hook ( Jaquar or equivalent)

Providing and fixing soil, waste and vent pipes : with UPVC pipe conforming to IS:13592 type B including jointing with seal ring conforming to IS :532 leaving 10mm gap for thermal expansion (i) single socketed pipes

110mm dia.

75 mm dia

M/S THAKUR TRADERS AND ENGINEERS

A. CHINNAIAH

J K CONSTRUCTION