RATE CONTRACT for supply of CONSUMABLES/NON-CONSUMABLES ITEMS for the Department of CSSD

Consumables

Surgical Gloves for General routine operations / ICU usage: Size - 6.0: Single use, sterile, disposable, polimer coated powder free, non-PVC, natural latex surgical gloves with finish of smooth inner surface and rough outer surface used for general routine operations. Gloves Should have high level of tactile sensitivity, secure grip, good resistant to tear, ease of donning and reduction of reflective glare. Packing: Number of gloves in a pack: 2 Nos. (1 pair), outer packing should be poly pouch or lacquer coated peel down paper or blister poly peel. Inner packing with medical grade paper. Packed to maintain sterility during shipping & storage and permit opening without contamination of the gloves. Colour: Translucent. Dimensions: Size(Number): 6 Thickness: 0.20 - 0.24 mm. Shelf life: 5 years. The product should have at least 2/3 rd of the total shelf life available at the time of supply. Standards: BIS certified, confirming IS 4148: 1989 (2021) / IS 13422: 1992 (2018) or equivalent standards CE / USFDA approved. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), test reports / proof of sterility from CDSCO / Central Govt./NABL acredited Lab to prove conformity to the specifications. Pack size: 50 pairs

Surgical Gloves for General routine operations / ICU usage: Size 6.5 Single use, sterile, disposable, polimer coated powder free, non-PVC, natural latex surgical gloves with finish of smooth inner surface and rough outer surface used for general routine operations. Gloves Should have high level of tactile sensitivity, secure grip, good resistant to tear, ease of donning and reduction of reflective glare. Packing: Number of gloves in a pack: 2 Nos. (1 pair), outer packing should be poly pouch or lacquer coated peel down paper or blister poly peel. Inner packing with medical grade paper. Packed to maintain sterility during shipping & storage and permit opening without contamination of the gloves. Colour: Translucent. Dimensions: Size(Number): 6.5 Thickness: 0.20 - 0.24 mm. Shelf life: 5 years. The product should have at least 2/3 rd of the total shelf life available at the time of supply. Standards: BIS certified, confirming IS 4148: 1989 (2021) / IS 13422: 1992 (2018) or equivalent standards CE / USFDA approved. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), test reports / proof of sterility from CDSCO / Central Govt./NABL acredited Lab to prove conformity to the specifications. Pack size: 50 pairs

Surgical Gloves for General routine operations / ICU usage: Size 7. 0 : Single use, sterile, disposable, polimer coated powder free, non-PVC, natural latex surgical gloves with finish of smooth inner surface and rough outer surface used for general routine operations. Gloves Should have high level of tactile sensitivity, secure grip, good resistant to tear, ease of donning and reduction of reflective glare. Packing: Number of gloves in a pack: 2 Nos. (1 pair), outer packing should be poly pouch or lacquer coated peel down paper or blister poly peel. Inner packing with medical grade paper. Packed to maintain sterility during shipping & storage and permit opening without contamination of the gloves. Colour: Translucent. Dimensions: Size(Number): 7 Thickness: 0.20 - 0.24 mm. Shelf life: 5 years. The product should have at least 2/3 rd of the total shelf life available at the time of supply. Standards: BIS certified, confirming IS 4148: 1989 (2021) / IS 13422: 1992 (2018) or equivalent standards CE / USFDA approved. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), test reports / proof of sterility from CDSCO / Central Govt./NABL acredited Lab to prove conformity to the specifications. Pack size: 50 pairs

Surgical Gloves for General routine operations / ICU usage: Size 7.5 Single use, sterile, disposable, polimer coated powder free, non-PVC, natural latex surgical gloves with finish of smooth inner surface and rough outer surface used for general routine operations. Gloves Should have high level of tactile sensitivity, secure grip, good resistant to tear, ease of donning and reduction of reflective glare. Packing: Number of gloves in a pack: 2 Nos. (1 pair), outer packing should be poly pouch or lacquer coated peel down paper or blister poly peel. Inner packing with medical grade paper. Packed to maintain sterility during shipping & storage and permit opening without contamination of the gloves. Colour: Translucent. Dimensions: Size(Number): 7.5 Thickness: 0.20 - 0.24 mm. Shelf life: 5 years. The product should have at least 2/3 rd of the total shelf life available at the time of supply. Standards: BIS certified, confirming IS 4148: 1989 (2021) / IS 13422: 1992 (2018) or equivalent standards CE / USFDA approved. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), test reports / proof of sterility from CDSCO / Central Govt./NABL acredited Lab to prove conformity to the specifications. Pack size: 50 pairs

Surgical Gloves for General routine operations / ICU usage: Size 8.0 : Single use, sterile, disposable, polimer coated powder free, non-PVC, natural latex surgical gloves with finish of smooth inner surface and rough outer surface used for general routine operations. Gloves Should have high level of tactile sensitivity, secure grip, good resistant to tear, ease of donning and reduction of reflective glare. Packing: Number of gloves in a pack: 2 Nos. (1 pair), outer packing should be poly pouch or lacquer coated peel down paper or blister poly peel. Inner packing with medical grade paper. Packed to maintain sterility during shipping & storage and permit opening without contamination of the gloves. Colour: Translucent. Dimensions: Size(Number): 8 Thickness: 0.20 - 0.24 mm. Shelf life: 5 years. The product should have at least 2/3 rd of the total shelf life available at the time of supply. Standards: BIS certified, confirming IS 4148: 1989 (2021) / IS 13422: 1992 (2018) or equivalent standards CE / USFDA approved. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), test reports / proof of sterility from CDSCO / Central Govt./NABL acredited Lab to prove conformity to the specifications. Pack size: 50 pairs

Surgical Gloves for Speciality surgeries: Size 6.0: Single use, sterile, disposable, polimer coated powder free, non-PVC, natural latex surgical gloves with finish of smooth inner surface and rough outer surface, tight beaded cuff, used for speciality surgeries. Textured finish: Gloves should ensure secure grip for confident instrument handling under dry or damp conditions and reduction of reflective glare. Optimized thickness: Gloves should have ideal balance of tactile sensitivity and protection, shape of curved fingers thumb ball, rounded finger tips, to reduce hand fatique Donning technology: Gloves should have internal coating to facilitate effortless / easy donning and doffing with either dry or damp hands. Chemo tested: Gloves Should be tested and safe to use with wide range of drugs. Packing: Number of gloves in a pack: 2 Nos.(1 pair), outer packing should be poly pouch or lacquer coated peel down paper or blister poly peel. Inner packing with medical grade paper. Packed to maintain sterility during shipping & storage and permit opening without contamination of the gloves. Colour: Translucent / Brown / Green to reduce reflective glare. Dimensions: Size(Number): 6. Shelf life: 5 years. The product should have at least 2/3 rd of the total shelf life available at the time of supply. Standards: BIS certified or ASTM D3577/D7160 or EN 16523-1/EN 374-2 AND -4/EN 4551-4 or EN ISO 21420:2020/ISO 10282. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), test reports / proof of sterility or certificates to be available in the OEM website. Pack size: 50 pairs

Surgical Gloves for Speciality surgeries: Size 6.5: Single use, sterile, disposable, polimer coated powder free, non-PVC, natural latex surgical gloves with finish of smooth inner surface and rough outer surface, tight beaded cuff, used for speciality surgeries. Textured finish: Gloves should ensure secure grip for confident instrument handling under dry or damp conditions and reduction of reflective glare. Optimized thickness: Gloves should have ideal balance of tactile sensitivity and protection, shape of curved fingers thumb ball, rounded finger tips, to reduce hand fatique Donning technology: Gloves should have internal coating to facilitate effortless / easy donning and doffing with either dry or damp hands. Chemo tested: Gloves Should be tested and safe to use with wide range of drugs. Packing: Number of gloves in a pack: 2 Nos.(1 pair), outer packing should be poly pouch or lacquer coated peel down paper or blister poly peel. Inner packing with medical grade paper. Packed to maintain sterility during shipping & storage and permit opening without contamination of the gloves. Colour: Translucent / Brown / Green to reduce reflective glare. Dimensions: Size(Number): 6.5. Shelf life: 5 years. The product should have at least 2/3 rd of the total shelf life available at the time of supply. Standards: BIS certified or ASTM D3577/D7160 or EN 16523-1/EN 374-2 AND -4/EN 4551-4 or EN ISO 21420:2020/ISO 10282. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), test reports / proof of sterility or certificates to be available in the OEM website. Pack size: 50 pairs

Surgical Gloves for Speciality surgeries: size 7.0 : Single use, sterile, disposable, polimer coated powder free, non-PVC, natural latex surgical gloves with finish of smooth inner surface and rough outer surface, tight beaded cuff, used for speciality surgeries. Textured finish: Gloves should ensure secure grip for confident instrument handling under dry or damp conditions and reduction of reflective glare. Optimized thickness: Gloves should have ideal balance of tactile sensitivity and protection, shape of curved fingers thumb ball, rounded finger tips, to reduce hand fatique Donning technology: Gloves should have internal coating to facilitate effortless / easy donning and doffing with either dry or damp hands. Chemo tested: Gloves Should be tested and safe to use with wide range of drugs. Packing: Number of gloves in a pack: 2 Nos.(1 pair), outer packing should be poly pouch or lacquer coated peel down paper or blister poly peel. Inner packing with medical grade paper. Packed to maintain sterility during shipping & storage and permit opening without contamination of the gloves. Colour: Translucent / Brown / Green to reduce reflective glare. Dimensions: Size(Number): 7. Shelf life: 5 years. The product should have at least 2/3 rd of the total shelf life available at the time of supply. Standards: BIS certified or ASTM D3577/D7160 or EN 16523-1/EN 374-2 AND -4/EN 4551-4 or EN ISO 21420:2020/ISO 10282. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), test reports / proof of sterility or certificates to be available in the OEM website. Pack size: 50 pairs

Surgical Gloves for Speciality surgeries: size 7.5: Single use, sterile, disposable, polimer coated powder free, non-PVC, natural latex surgical gloves with finish of smooth inner surface and rough outer surface, tight beaded cuff, used for speciality surgeries. Textured finish: Gloves should ensure secure grip for confident instrument handling under dry or damp conditions and reduction of reflective glare. Optimized thickness: Gloves should have ideal balance of tactile sensitivity and protection, shape of curved fingers thumb ball, rounded finger tips, to reduce hand fatique Donning technology: Gloves should have internal coating to facilitate effortless / easy donning and doffing with either dry or damp hands. Chemo tested: Gloves Should be tested and safe to use with wide range of drugs. Packing: Number of gloves in a pack: 2 Nos.(1 pair), outer packing should be poly pouch or lacquer coated peel down paper or blister poly peel. Inner packing with medical grade paper. Packed to maintain sterility during shipping & storage and permit opening without contamination of the gloves. Colour: Translucent / Brown / Green to reduce reflective glare. Dimensions: Size(Number): 7.5. Shelf life: 5 years. The product should have at least 2/3 rd of the total shelf life available at the time of supply. Standards: BIS certified or ASTM D3577/D7160 or EN 16523-1/EN 374-2 AND -4/EN 4551-4 or EN ISO 21420:2020/ISO 10282. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), test reports / proof of sterility or certificates to be available in the OEM website. Pack size: 50 pairs

Surgical Gloves for Speciality surgeries: size 8.0: Single use, sterile, disposable, polimer coated powder free, non-PVC, natural latex surgical gloves with finish of smooth inner surface and rough outer surface, tight beaded cuff, used for speciality surgeries. Textured finish: Gloves should ensure secure grip for confident instrument handling under dry or damp conditions and reduction of reflective glare. Optimized thickness: Gloves should have ideal balance of tactile sensitivity and protection, shape of curved fingers thumb ball, rounded finger tips, to reduce hand fatique Donning technology: Gloves should have internal coating to facilitate effortless / easy donning and doffing with either dry or damp hands. Chemo tested: Gloves Should be tested and safe to use with wide range of drugs. Packing: Number of gloves in a pack: 2 Nos.(1 pair), outer packing should be poly pouch or lacquer coated peel down paper or blister poly peel. Inner packing with medical grade paper. Packed to maintain sterility during shipping & storage and permit opening without contamination of the gloves. Colour: Translucent / Brown / Green to reduce reflective glare. Dimensions: Size(Number): 8. Shelf life: 5 years. The product should have at least 2/3 rd of the total shelf life available at the time of supply. Standards: BIS certified or ASTM D3577/D7160 or EN 16523-1/EN 374-2 AND -4/EN 4551-4 or EN ISO 21420:2020/ISO 10282. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), test reports / proof of sterility or certificates to be available in the OEM website. Pack size: 50 pairs

Sterile Examination Gloves Specification: Size: Small (5"-6") 1) Type of Glove : Single use, sterile, disposable, polimer coated powder free, non-PVC, natural latex gloves for medical examination . Gloves should not be sticky and good resistant to tear as per standard 2) Size: Small(5"-6"), 3)Packing for gloves: Individual packing for single sterile glove within the medical grade paper with outer cover. Number of glove in a pack: single 4) Certification: BIS certified confirming with IS:15354, ISI marked. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), test reports / proof of sterility from CDSCO / Central Govt./NABL acredited Lab to prove conformity to the specifications. Pack size: 100 Nos.

Sterile Examination Gloves Specification: Size: Medium (7"-8") 1) Type of Glove : Single use, sterile, disposable, polimer coated powder free, non-PVC, natural latex gloves for medical examination . Gloves should not be sticky and good resistant to tear as per standard 2) Size: Medium(7"-8") 3)Packing for gloves: Individual packing for single sterile glove within the medical grade paper with outer cover. Number of glove in a pack: single 4) Certification: BIS certified confirming with IS:15354, ISI marked. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), test reports / proof of sterility from CDSCO / Central Govt./NABL acredited Lab to prove conformity to the specifications. Pack size: 100 Nos.

Sterile Examination Gloves Specification: Size: Large (8.5"- 9.5") 1) Type of Glove : Single use, sterile, disposable, polimer coated powder free, non-PVC, natural latex gloves for medical examination . Gloves should not be sticky and good resistant to tear as per standard 2) Size: Large(8.5"-9.5") 3)Packing for gloves: Individual packing for single sterile glove within the medical grade paper with outer cover. Number of glove in a pack: single 4) Certification: BIS certified confirming with IS:15354, ISI marked. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), test reports / proof of sterility from CDSCO / Central Govt./NABL acredited Lab to prove conformity to the specifications. Pack size: 100 Nos.

Unsterile Examination Gloves Specifications: Size: Small (5"-6") 1)Type of Glove : Single use, unsterile, disposable, polimer coated powder free, non-PVC, natural latex gloves for medical examination . Gloves should have good resistant to tear as per standard and not to be sticky with each other. 2)Size: Small(5"-6") 3) Packing: Multi units in one packet: 100 gloves. Certification: BIS certified confirming with IS:15354, ISI marked. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), test reports / proof of sterility from CDSCO / Central Govt./NABL acredited Lab to prove conformity to the specifications. Pack size: 100 Nos.

Unsterile Examination Gloves Specifications: Size: Medium (7"-8") 1)Type of Glove : Single use, unsterile, disposable, polimer coated powder free, non-PVC, natural latex gloves for medical examination . Gloves should have good resistant to tear as per standard and not to be sticky with each other. 2)Size: Medium(7"- 8") 3) Packing: Multi units in one packet: 100 gloves. Certification: BIS certified confirming with IS:15354, ISI marked. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), test reports / proof of sterility from CDSCO / Central Govt./NABL acredited Lab to prove conformity to the specifications. Pack size: 100 Nos.

Unsterile Examination Gloves Specifications:Size: Large (8.5"- 9.5") 1)Type of Glove : Single use, unsterile, disposable, polimer coated powder free, non-PVC, natural latex gloves for medical examination . Gloves should have good resistant to tear as per standard and not to be sticky with each other. 2)Size: Large(8.5"- 9.5") 3) Packing: Multi units in one packet: 100 gloves. Certification: BIS certified confirming with IS:15354, ISI marked. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), test reports / proof of sterility from CDSCO / Central Govt./NABL acredited Lab to prove conformity to the specifications. Pack size: 100 Nos.

Nitrile Gloves for medical examination: Size: Small (5"- 6") Type of gloves: Single use, unsterile, latex free, odor free, beaded cuff, textured fingers, consistent grip and high elasticity, powder-free nitrile gloves for medical examination. Gloves should have good resistant to tear as per standard and not to be sticky with each other. Pack size: 100 units. Colour: Blue. Medical level standard: ASTM 6319. OEM should produce data sheet, certificate of standards, valid licenses, manufacturing units certificates, test reports from CDSCO / Central Govt/NABL acredited Lab to prove conformity to the specifications. Pack size: 100 Nos.

Nitrile Gloves for medical examination: Size: Medium(7"- 8") Type of gloves: Single use, unsterile, latex free, odor free, beaded cuff, textured fingers, consistent grip and high elasticity, powder-free nitrile gloves for medical examination. Gloves should have good resistant to tear as per standard and not to be sticky with each other. Pack size: 100 units. Colour: Blue. Medical level standard: ASTM 6319. OEM should produce data sheet, certificate of standards, valid licenses, manufacturing units certificates, test reports from CDSCO / Central Govt/NABL acredited Lab to prove conformity to the specifications. Pack size: 100 Nos.

Nitrile Gloves for medical examination: Size: Large (8.5"- 9.5") Type of gloves: Single use, unsterile, latex free, odor free, beaded cuff, textured fingers, consistent grip and high elasticity, powder-free nitrile gloves for medical examination. Gloves should have good resistant to tear as per standard and not to be sticky with each other. Pack size: 100 units. Colour: Blue. Medical level standard: ASTM 6319. OEM should produce data sheet, certificate of standards, valid licenses, manufacturing units certificates, test reports from CDSCO / Central Govt/NABL acredited Lab to prove conformity to the specifications. Pack size: 100 Nos.

Non-PVC Glove Specifications :- Disposable Non-PVC HDPE gloves of 45 G thickness. Transparent, Universal fitting size, soft & flexible, latex free, powder free. Pack size: 100 Nos.

Reusable nitrile chemical gloves for cleaning purpose: Size: Small (Palm with: 7cm) Reusable nitrile gloves made from Acryonitrile Butadiene Rubber which is mechanical resistant (EN 388) to puncture, tear, blade cut, abrasion and penetration resistant (EN 374- part-2 & 3) against chemicals & micro organisms. Grip: Gloves should have good gripping pattern palm in both wet and dry conditions. Color: Any. No of Gloves in a pack : 2 (one pair). Pack size: 100 pairs

Reusable nitrile chemical gloves for cleaning purpose: Size: Medium (Palm with: 8cm) Reusable nitrile gloves made from Acryonitrile Butadiene Rubber which is mechanical resistant (EN 388) to puncture, tear, blade cut, abrasion and penetration resistant (EN 374- part-2 & 3) against chemicals & micro organisms. Grip: Gloves should have good gripping pattern palm in both wet and dry conditions. Color: Any. No of Gloves in a pack : 2 (one pair). Pack size: 100 pairs

Reusable nitrile chemical gloves for cleaning purpose: Size: Large(Palm with: 9cm) Reusable nitrile gloves made from Acryonitrile Butadiene Rubber which is mechanical resistant (EN 388) to puncture, tear, blade cut, abrasion and penetration resistant (EN 374- part-2 & 3) against chemicals & micro organisms. Grip: Gloves should have good gripping pattern palm in both wet and dry conditions. Color: Any. No of Gloves in a pack : 2 (one pair). Pack size: 100 pairs

Sterile Disposable syringe for single use without needle 1 ml: Specifications: Syringes should be with clear syringe barrel, precise graduation with permanent marking, easy readability, Safe plunger backstop, smooth finishing of barrel & plunger. Syringe capacity: 1ml. Graduation: Unit Scale U-40 or both U-40 and ml printed in same syringe. Syringe Material: medical grade plastic (Polyethylene (PE)/ polypropylene (PP)/ polystyrene (PS). The materials used for fabrication of syringes (including lubricant) and packaging should be non toxic, do not adversely affect the efficacy, safety and acceptability. Syringe Barrel: sufficiently transparent to allow easy measurement of the volume contained in the syringe and detection of air bubbles. Length with a maximum usable capacity of at least 10% more than the nominal capacity. Standards: Indian standard IS 10258 -2002 latest, equivalent to ISO 7886 part 3. Barrel Nozzle: LUER SLIP type. Sterility & Product and packaging: Sterile, ethylene oxide sterilisation and compiles to BS EN 550:1994-ISO 11135-1:2007 or its equivalent Indian Standards). Primary packaging: Each syringe packed in an individual sterilized peel-pack / blister pack / ribbon pack. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), Marketing approval / test reports / proof of sterility. or certificates to be available in the OEM website. Pack size: 100 Nos.

Sterile Disposable syringe for single use without needle 2 ml: Specifications: Syringes should be with clear syringe barrel, precise graduation in ml, scale interval 0.1ml line increment according to ISO standard with permanent marking, easy readability, Safe plunger backstop, smooth finishing of barrel & plunger. Syringe capacity: 2 ml. Syringe Material: medical grade plastic (Polyethylene (PE)/ polypropylene (PP)/ polystyrene (PS). The materials used for fabrication of syringes (including lubricant) and packaging should be non toxic, do not adversely affect the efficacy, safety and acceptability. Syringe Barrel: sufficiently transparent to allow easy measurement of the volume contained in the syringe and detection of air bubbles. Length with a maximum usable capacity of at least 10% more than the nominal capacity. Standards: BIS certified, should be comply Indian standard IS 10258 -2002 latest, equivalent to ISO 7886 part 3. Barrel Nozzle: LUER SLIP type. Sterility & Product and packaging: Sterile, ethylene oxide sterilisation and compiles to BS EN 550:1994-ISO 11135-1:2007 or its equivalent Indian Standards). Primary packaging: Each syringe packed in an individual sterilized peel-pack / blister pack / ribbon pack. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), Marketing approval / test reports / proof of sterility. or certificates to be available in the OEM website . Pack size: 100 Nos.

Sterile Disposable syringe for single use without needle 5 ml:Specifications: Syringes should be with clear syringe barrel, precise graduation in ml scale interval 0.2ml line increment according to ISO standard with permanent marking, easy readability, Safe plunger backstop, smooth finishing of barrel & plunger. Syringe capacity: 5 ml Syringe Material: medical grade plastic (Polyethylene (PE)/ polypropylene (PP)/ polystyrene (PS). The materials used for fabrication of syringes (including lubricant) and packaging should be non toxic, do not adversely affect the efficacy, safety and acceptability. Syringe Barrel: sufficiently transparent to allow easy measurement of the volume contained in the syringe and detection of air bubbles. Length with a maximum usable capacity of at least 10% more than the nominal capacity. Standards: Indian standard IS 10258 -2002 latest, equivalent to ISO 7886 part 3. Barrel Nozzle: LUER SLIP type. Sterility & Product and packaging: Sterile, ethylene oxide sterilisation and compiles to BS EN 550:1994-ISO 11135-1:2007 or its equivalent Indian Standards) Primary packaging: Each syringe packed in an individual sterilized peel-pack / blister pack / ribbon pack. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), Marketing approval / test reports / proof of sterility. or certificates to be available in the OEM website . Pack size: 100 Nos.

Sterile Disposable syringe for single use without needle 10 ml: Specifications: Syringes should be with clear syringe barrel, precise graduation in ml scale interval 0.2ml line increment according to ISO standard with permanent marking, easy readability, Safe plunger backstop, smooth finishing of barrel & plunger. Syringe capacity: 10 ml Syringe Material: medical grade plastic (Polyethylene (PE)/ polypropylene (PP)/ polystyrene (PS). The materials used for fabrication of syringes (including lubricant) and packaging should be non toxic, do not adversely affect the efficacy, safety and acceptability. Syringe Barrel: sufficiently transparent to allow easy measurement of the volume contained in the syringe and detection of air bubbles. Length with a maximum usable capacity of at least 10% more than the nominal capacity. Standards: Indian standard IS 10258 -2002 latest, equivalent to ISO 7886 part 3. Barrel Nozzle: LUER SLIP type. Sterility & Product and packaging: Sterile, ethylene oxide sterilisation and compiles to BS EN 550:1994-ISO 11135-1:2007 or its equivalent Indian Standards) Primary packaging: Each syringe packed in an individual sterilized peel-pack / blister pack / ribbon pack. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), Marketing approval / test reports / proof of sterility. or certificates to be available in the OEM website . Pack size: 100 Nos.

Sterile Disposable syringe for single use without needle 20 ml:Specifications: Syringes should be with clear syringe barrel, precise graduation in ml scale interval 1ml line increment according to ISO standard with permanent marking, easy readability, Safe plunger backstop, smooth finishing of barrel & plunger. Syringe capacity: 20 ml. Syringe Material: medical grade plastic (Polyethylene (PE)/ polypropylene (PP)/ polystyrene (PS). The materials used for fabrication of syringes (including lubricant) and packaging should be non toxic, do not adversely affect the efficacy, safety and acceptability. Syringe Barrel: sufficiently transparent to allow easy measurement of the volume contained in the syringe and detection of air bubbles. Length with a maximum usable capacity of at least 10% more than the nominal capacity. Standards: Indian standard IS 10258 -2002 latest, equivalent to ISO 7886 part 3. Barrel Nozzle: LUER SLIP type. Sterility & Product and packaging: Sterile, ethylene oxide sterilisation and compiles to BS EN 550:1994-ISO 11135-1:2007 or its equivalent Indian Standards). Primary packaging: Each syringe packed in an individual sterilized peel-pack / blister pack / ribbon pack. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), Marketing approval / test reports / proof of sterility. or certificates to be available in the OEM website . Pack size: 50 Nos.

Sterile Disposable syringe for single use without needle 50 ml: Specifications: Syringes should be with clear syringe barrel, precise graduation in ml scale interval 1ml line increment according to ISO standard with permanent marking, easy readability, Safe plunger backstop, smooth finishing of barrel & plunger. Syringe capacity: 50 ml. Syringe Material: medical grade plastic (Polyethylene (PE)/ polypropylene (PP)/ polystyrene (PS). The materials used for fabrication of syringes (including lubricant) and packaging should be non toxic, do not adversely affect the efficacy, safety and acceptability. Syringe Barrel: sufficiently transparent to allow easy measurement of the volume contained in the syringe and detection of air bubbles. Length with a maximum usable capacity of at least 10% more than the nominal capacity. Standards: Indian standard IS 10258 -2002 latest, equivalent to ISO 7886 part 3. Barrel Nozzle: LUER SLIP type. Sterility & Product and packaging: Sterile, ethylene oxide sterilisation and compiles to BS EN 550:1994-ISO 11135-1:2007 or its equivalent Indian Standards). Primary packaging: Each syringe packed in an individual sterilized peel-pack / blister pack / ribbon pack. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), Marketing approval / test reports / proof of sterility. or certificates to be available in the OEM website. Pack size: 25 Nos.

Insulin Syringe: Syringe Unit scale (Units): U-40. Insulin Syringe type: As per ISO 8537:2016 or its equivalent Indian standards. Syringe with needle and packaged in a unit packaging. Syringe Barrel: sufficiently clear to enable dosages to be read and for air bubbles to be seen without difficulty. Barrel length with a usable capacity of either 10 % more than the nominal capacity. Syringe Material: medical grade plastic (Polyethylene (PE)/ polypropylene (PP)/ polystyrene (PS). The materials used for fabrication of syringes (including lubricant) and packaging do not adversely affect the efficacy, safety and acceptability of insulin preparations. Pack size: 100 Nos.

Actively Disabling Syringes without needle Specifications : - Capacity =5 ml Sterile, disposable and without needle. Actively disabling - RUP Syringe with Reuse prevention feature. 2 part syringe. Actively disabling Reuse prevention feature, permanently disable by user after completion of intended use even after multiple plunger movements to prevent subsequent reuse of the syringe, equivalent to ISO 7864, type 2-B. Pack size: 100 Nos.

Actively Disabling Syringes without needle Specifications : - Capacity =10 ml Sterile, disposable and without needle. Actively disabling - RUP Syringe with Reuse prevention feature. 2 part syringe. Actively disabling Reuse prevention feature, permanently disable by user after completion of intended use even after multiple plunger movements to prevent subsequent reuse of the syringe, equivalent to ISO 7864, type 2-B. Pack size: 100 Nos.

Sterile Disposable syringe for single use without needle 20 ml Luer Lock Type: Specifications: Syringes should be with clear syringe barrel, precise graduation in ml with permanent marking, easy readability, Safe plunger backstop. Syringe capacity: 20 mlSyringe Material: medical grade plastic (Polyethylene (PE)/ polypropylene (PP)/ polystyrene (PS). The materials used for fabrication of syringes (including lubricant) and packaging should be non toxic, do not adversely affect the efficacy, safety and acceptability. Syringe Barrel: sufficiently transparent to allow easy measurement of the volume contained in the syringe and detection of air bubbles. Length with a maximum usable capacity of at least 10% more than the nominal capacity. Standards: Indian standard IS 10258 -2002 latest, equivalent to ISO 7886 part 3. Barrel Nozzle: LUER LOCK type. Sterility & Product and packaging: Sterile, ethylene oxide sterilisation and compiles to BS EN 550:1994-ISO 11135-1:2007 or its equivalent Indian Standards) Primary packaging: Each syringe packed in an individual sterilized peel-pack / blister pack / ribbon pack. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), Marketing approval / test reports / proof of sterility. or certificates to be available in the OEM website . Pack size: 50 Nos.

Sterile Disposable syringe for single use without needle 50 ml Luer Lock Type: Specifications: Syringes should be with clear syringe barrel, precise graduation in ml with permanent marking, easy readability, Safe plunger backstop. Syringe capacity: 50 ml Syringe Material: medical grade plastic (Polyethylene (PE)/ polypropylene (PP)/ polystyrene (PS). The materials used for fabrication of syringes (including lubricant) and packaging should be non toxic, do not adversely affect the efficacy, safety and acceptability. Syringe Barrel: sufficiently transparent to allow easy measurement of the volume contained in the syringe and detection of air bubbles. Length with a maximum usable capacity of at least 10% more than the nominal capacity. Standards: Indian standard IS 10258 -2002 latest, equivalent to ISO 7886 part 3. Barrel Nozzle: LUER LOCK type. Sterility & Product and packaging: Sterile, ethylene oxide sterilisation and compiles to BS EN 550:1994-ISO 11135-1:2007 or its equivalent Indian Standards). Primary packaging: Each syringe packed in an individual sterilized peel-pack / blister pack / ribbon pack. Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), Marketing approval / test reports / proof of sterility. or certificates to be available in the OEM website . Pack size: 25 Nos.

Sterile disposable hypodermic needles specifications: 16G x 1.5" Needle material: Stainless steel tubing conform to IS 10654:2002 latest for sterile hypodermic needles, quivalent to ISO 9626 and needle point in accordance with ISO 7864. Should be packed without any risk of breach in sterility. ETO/Gamma Sterilized. Needle Measurements: External diameter expressed in Gauge and inches. Needle Protective cap: Medical grade plastic. Dead space: Should be minimum to reduce waste. Sterile: By Ethylene oxide and compiles to BS EN 550:1994-ISO 11135-1:2007. Packaging and labelling: Primary packaging: Each needle packed in an individual sterilized peel-pack made of paper and/or plastic.The materials used for fabrication of needles and packaging do not adversely affect the efficacy, safety and acceptability Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), Marketing approval / test reports / proof of sterility. or certificates to be available in the OEM website. Pack size: 100 Nos.

Sterile disposable hypodermic needles specifications: 18G x 1.5" Needle material: Stainless steel tubing conform to IS 10654:2002 latest for sterile hypodermic needles, quivalent to ISO 9626 and needle point in accordance with ISO 7864. Should be packed without any risk of breach in sterility. ETO/Gamma Sterilized. Needle Measurements: External diameter expressed in Gauge and inches. Needle Protective cap: Medical grade plastic. Dead space: Should be minimum to reduce waste. Sterile: By Ethylene oxide and compiles to BS EN 550:1994-ISO 11135-1:2007. Packaging and labelling: Primary packaging: Each needle packed in an individual sterilized peel-pack made of paper and/or plastic.The materials used for fabrication of needles and packaging do not adversely affect the efficacy, safety and acceptability Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), Marketing approval / test reports / proof of sterility. or certificates to be available in the OEM website. Pack size: 100 Nos.

Sterile disposable hypodermic needles specifications: 20G x 1.5" Needle material: Stainless steel tubing conform to IS 10654:2002 latest for sterile hypodermic needles, quivalent to ISO 9626 and needle point in accordance with ISO 7864. Should be packed without any risk of breach in sterility. ETO/Gamma Sterilized. Needle Measurements: External diameter expressed in Gauge and inches. Needle Protective cap: Medical grade plastic. Dead space: Should be minimum to reduce waste. Sterile: By Ethylene oxide and compiles to BS EN 550:1994-ISO 11135-1:2007. Packaging and labelling: Primary packaging: Each needle packed in an individual sterilized peel-pack made of paper and/or plastic.The materials used for fabrication of needles and packaging do not adversely affect the efficacy, safety and acceptability Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), Marketing approval / test reports / proof of sterility. or certificates to be available in the OEM website. Pack size: 100 Nos.

Sterile disposable hypodermic needles specifications: 21G x 1.5" Needle material: Stainless steel tubing conform to IS 10654:2002 latest for sterile hypodermic needles, quivalent to ISO 9626 and needle point in accordance with ISO 7864. Should be packed without any risk of breach in sterility. ETO/Gamma Sterilized. Needle Measurements: External diameter expressed in Gauge and inches. Needle Protective cap: Medical grade plastic. Dead space: Should be minimum to reduce waste. Sterile: By Ethylene oxide and compiles to BS EN 550:1994-ISO 11135-1:2007. Packaging and labelling: Primary packaging: Each needle packed in an individual sterilized peel-pack made of paper and/or plastic.The materials used for fabrication of needles and packaging do not adversely affect the efficacy, safety and acceptability Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), Marketing approval / test reports / proof of sterility. or certificates to be available in the OEM website. Pack size: 100 Nos.

Sterile disposable hypodermic needles specifications: 22G x 1.5" Needle material: Stainless steel tubing conform to IS 10654:2002 latest for sterile hypodermic needles, quivalent to ISO 9626 and needle point in accordance with ISO 7864. Should be packed without any risk of breach in sterility. ETO/Gamma Sterilized. Needle Measurements: External diameter expressed in Gauge and inches. Needle Protective cap: Medical grade plastic. Dead space: Should be minimum to reduce waste. Sterile: By Ethylene oxide and compiles to BS EN 550:1994-ISO 11135-1:2007. Packaging and labelling: Primary packaging: Each needle packed in an individual sterilized peel-pack made of paper and/or plastic.The materials used for fabrication of needles and packaging do not adversely affect the efficacy, safety and acceptability Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), Marketing approval / test reports / proof of sterility. or certificates to be available in the OEM website. Pack size: 100 Nos.

Sterile disposable hypodermic needles specifications: 23G x 1.0" Needle material: Stainless steel tubing conform to IS 10654:2002 latest for sterile hypodermic needles, quivalent to ISO 9626 and needle point in accordance with ISO 7864. Should be packed without any risk of breach in sterility. ETO/Gamma Sterilized. Needle Measurements: External diameter expressed in Gauge and inches. Needle Protective cap: Medical grade plastic. Dead space: Should be minimum to reduce waste. Sterile: By Ethylene oxide and compiles to BS EN 550:1994-ISO 11135-1:2007. Packaging and labelling: Primary packaging: Each needle packed in an individual sterilized peel-pack made of paper and/or plastic.The materials used for fabrication of needles and packaging do not adversely affect the efficacy, safety and acceptability Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), Marketing approval / test reports / proof of sterility. or certificates to be available in the OEM website. Pack size: 100 Nos.

Sterile disposable hypodermic needles specifications: 24G x 1.0" Needle material: Stainless steel tubing conform to IS 10654:2002 latest for sterile hypodermic needles, quivalent to ISO 9626 and needle point in accordance with ISO 7864. Should be packed without any risk of breach in sterility. ETO/Gamma Sterilized. Needle Measurements: External diameter expressed in Gauge and inches. Needle Protective cap: Medical grade plastic. Dead space: Should be minimum to reduce waste. Sterile: By Ethylene oxide and compiles to BS EN 550:1994-ISO 11135-1:2007. Packaging and labelling: Primary packaging: Each needle packed in an individual sterilized peel-pack made of paper and/or plastic.The materials used for fabrication of needles and packaging do not adversely affect the efficacy, safety and acceptability Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), Marketing approval / test reports / proof of sterility. or certificates to be available in the OEM website. Pack size: 100 Nos.

Sterile disposable hypodermic needles specifications: 26G x 0.5" Needle material: Stainless steel tubing conform to IS 10654:2002 latest for sterile hypodermic needles, quivalent to ISO 9626 and needle point in accordance with ISO 7864. Should be packed without any risk of breach in sterility. ETO/Gamma Sterilized. Needle Measurements: External diameter expressed in Gauge and inches. Needle Protective cap: Medical grade plastic. Dead space: Should be minimum to reduce waste. Sterile: By Ethylene oxide and compiles to BS EN 550:1994-ISO 11135-1:2007. Packaging and labelling: Primary packaging: Each needle packed in an individual sterilized peel-pack made of paper and/or plastic.The materials used for fabrication of needles and packaging do not adversely affect the efficacy, safety and acceptability Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), Marketing approval / test reports / proof of sterility. or certificates to be available in the OEM website. Pack size: 100 Nos.

Sterile disposable hypodermic needles specifications: 31G x 5/16" (8 mm) Needle material: Stainless steel tubing conform to IS 10654:2002 latest for sterile hypodermic needles, quivalent to ISO 9626 and needle point in accordance with ISO 7864. Should be packed without any risk of breach in sterility. ETO/Gamma Sterilized. Needle Measurements: External diameter expressed in Gauge and inches. Needle Protective cap: Medical grade plastic. Dead space: Should be minimum to reduce waste. Sterile: By Ethylene oxide and compiles to BS EN 550:1994-ISO 11135-1:2007. Packaging and labelling: Primary packaging: Each needle packed in an individual sterilized peel-pack made of paper and/or plastic.The materials used for fabrication of needles and packaging do not adversely affect the efficacy, safety and acceptability Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), Marketing approval / test reports / proof of sterility. or certificates to be available in the OEM website. Pack size: 100 Nos.

Infusion (IV) Set, non-vented: Sterile, disposable, single use, gravity feed, non-vented infusion set confirming to IS: 12655 (Part -4) latest. IV set should be non-toxic, pyrogen free, non-kinking quality. IV set should have sturdy spike with protective cap, drip chamber should have fluid filter, sturdy roller clamp, non-kinking, non-toxic tubing, stepwise injection port, luer slip connector with 21 G needle. Infusion should be macro drip (20 drops = 1 ml ± 0.1ml) Pack without any risk of breach in sterility, ETO/ Gamma sterilized. Outer cover should have option eye cut/tear mark/peel-pack for easy opening. ISO or ISI certified or its equivalent Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), Marketing approval / test reports / proof of sterility or certificates/documents to be available in the OEM website. Pack size: 50 Nos.

Infusion (IV) Set, vented: Sterile, disposable, single use, gravity feed, vented infusion set confirming to IS: 12655 (Part -4) latest. IV set should be non-toxic, pyrogen free, non-kinking quality. IV set should have sturdy spike with protective cap, drip chamber should have fluid filter and non-leaking air vent with provision of closure of airvent, sturdy roller clamp, non-kinking, non-toxic tubing, stepwise injection port, luer slip connector with 21 G needle. Infusion should be macro drip (20 drops = 1 ml ± 0.1ml) Pack without any risk of breach in sterility, ETO/ Gamma sterilized. Outer cover should have option eye cut/tear mark/peel-pack for easy opening. ISO or ISI certified or its equivalent Certificates: OEM should produce Data sheet, certificate of standards, valid licenses, manufacturing units certificates (ISO 13485), Marketing approval / test reports / proof of sterility or certificates/documents to be available in the OEM website. Pack size: 50 Nos.

3 ply Surgical Mask Tie type: Specifications: 1) ISO certified: yes 2) Fabric material: Non-woven fabric with middle polyfibre layer 3) GSM of the fabric(G/m2): 60-70 4) Pleated construction of Mask: to provide adjustable and leakproof fitting 5) No. of layers of plies of fabric: 3 layers 6) Bacterial filtration efficiency (BFE%): >=99 7) Splash resistant: Yes 8) Breathing resistance (mm of H2O/cm2): <=5(splash resistant) 9) Securing type: Tie type 10) Adjustable flexible nose clip: with 11) Colour: any 12) Length : 17 - 18cm 13) Width: 9 - 10cm 14) Submission of Test Report to the buyer on demand from NABL/ILAC accredited or Central Govt. Lab to prove conformity of products to the specification: Yes 15) Certification: ISI. Pack size: 100 Nos.

3 ply Surgical Mask Earloop type: Specifications: 1) ISO certified: yes 2) Fabric material: Non-woven fabric with middle polyfibre layer 3) GSM of the fabric(G/m2): 60-70 4) Pleated construction of Mask: to provide adjustable and leakproof fitting 5) No. of layers of plies of fabric: 3 layers 6) Bacterial filtration efficiency (BFE%): >=99 7) Splash resistant: Yes 8) Breathing resistance (mm of H2O/cm2): <=5(splash resistant) 9) Securing type: Earloop type 10) Adjustable flexible nose clip: with 11) Colour: any 12) Length : 17 - 18cm 13) Width: 9 - 10cm 14) Submission of Test Report to the buyer on demand from NABL/ILAC accredited or Central Govt. Lab to prove conformity of products to the specification: Yes 15) Certification: ISI. Pack size: 100 Nos.

Doctors Cap (Bouffant type) Specifications:- 1) Size: 18-21 inch 2) Type of material: Non-woven breathable 3) Design: Bouffant type 4) Composition of nonwoven material: spun-bond non-woven 5) GSM of Cap material: 20gm/sq.mtrs. 6) Well fitted with double elastic or string: Yes 7) Properly ultrasonically sealed for uniformity: Yes 8) Colour: Any 9) Bacterial filteration: Yes 10) Air permeable: Yes 11) Certification: ISO certified 12) Submission of Test Report to the buyer from NABL/ILAC accredited or Central Govt. lab to prove conformity of products to the specification on demand to the buyer: Yes. Pack size: 100 Nos.

Surgeon's Cap with sweat band : Specifications:- 1) Size: 18-21 inch 2) Type of material: Non-woven breathable 3) Composition of nonwoven material: spun-bond non-woven 4) Well fitted with double elastic or string: Yes 5) Properly ultrasonically sealed for uniformity: Yes 6) Colour: Any 7) Bacterial filteration: Yes 8) Air permeable: Yes. Pack size: 100 Nos.

Sterile Medical Gown for ICU : Specifications:- 1) Gown type: ICU gown 2) Colour: Medical blue 3) Disposable: Yes 4) Breathable: Yes 5) antistatic properties: yes 6) Impervious to fluids: Yes 7) Reinforced: No 8) Sterilized: Yes 9) Method of sterilization: ETO 10) Gown width: 70-80cm 11) Gown length: 125-150cm 12) Adjustable neck ties : Yes. 13) No. of belts to tie: 2 pairs. 14) material used for gown: Non-woven, spun bond 15) GSM of non-woven fabric: 40 g/m2 16) Alcohol repellent material: Yes 17) Sleve type: Full sleeve 18) Cuff end: With knitted cuff at least 10cm width 19) Wrap around type: Yes 20) Type of packing: Sterile pack, pouch must be peel off made of medical grade paper 21) AAMI protection level: Level III 22) Certification : ISO certified 23) submission of test report clearly specifying the nomenclature of fabric, method of sterilization and AAMI protection level in addition to other parameter to the buyer on form 39 or from NABL/ILAC accredited or Central Govt. lab to prove conformity certificte to be furnished to buyer at the time of supply: Yes. Pack size: 50 Nos.

Unsterile Medical Gown Specifications:- 1) Gown type: Ward gown 2) Colour: Medical blue 3) Disposable: Yes 4) Breathable: Yes 5) antistatic properties: yes 6) Impervious to fluids: Yes 7) Reinforced: No 8) Sterilized: No 10) Gown width: 70-80cm 11) Gown length: 125-150cm 12) Adjustable neck ties : Yes. 13) No. of belts to tie: 2 pairs. 15) material used for gown: Non-woven, spun bond 16) GSM of non-woven fabric: 40 g/m2 17) Alcohol repellent material: Yes 18) Sleve type: Full sleeve 19) Cuff end: With knitted cuff at least 10cm width 20) Wrap around type: Yes. Pack size: 100 Nos.

Surgeon Gown for HIV protection Specifications:- 1) Gown type: surgeon gown for HIV protection 2) Colour: Medical blue / green 3) Disposable: Yes 4) Breathable: Yes 5) Antistatic properties: yes 6) Impervious to fluids: Yes 7) Reinforced: yes 8) Sterilized: Yes 9) Method of sterilization: ETO 10) Gown width: 70-80cm 11) Gown length: 125-150cm . 12) No. of belts to tie: 2 pairs with paper clip 13) Material used for gown: Non woven SMS 14) Composition of reinforced material : SMS+Poly coated to be smooth inner surface 15) Reincorced critical zones (front and sleeve up to elbows) to provide 100% protection against any amount of fluid: Yes 16) GSM of non woven fabric: 68g/m2 and above 17) Closing at neck: Hook and loop / velcro fastener with piping of non woven material stitched to raw edges of neck opening extending at both ends for tying 18) Pair of disposable absorbent hand wipes: Yes 19) Sleeve type: Raglan sleeve, full sleeve 20) Cuff end: With knitted cuff of at least 10cm width 21) Wrap around type: Yes 22) Type of packing : Sterile pack, must be double packed with outer pouch must be peel off made of medical gade paper 23) type wrapping: Set in sleeve 24) AAMI Protection level: Level IV 25) Certification: ISO 13485:2016 26) Submission of test report clearly specifying the nomenclature of fabric, method of sterilization an AAMI protection level in addition to other parameter to the buyer on form 39 or from NABL/ILAC accredited or Central Govt. Lab to prove conformity of products to the specification : yes 27) Product conformity certificate to be furnished to buyer at the time of supply: Yes. Pack size: 50 Nos.

Visitor / Patient gown: Disposable, green colour, free size, made from non woven fabric, two pair of ties, maintenance free, full sleeve, material of the gown should not be transparent, ISO-CE standards. Pack size: 100 Nos.

SMS Sterilization wrapping paper sheet (blue/green), Size: 100 x 100 cms Specificaitons: Non-woven, bacterial barrier, single use, light weight, wet penetration resistant.Lowering the risk of puncturing or tearing during wrapping, transport. Comply with EN 868 – 2. Comply with the essential requirement 93/42/EEC Directive and should be CE marked or equivalent. Can be sterilized in steam, EO, Radiation, Formaldehyde and VH2 O2. Pack size: 10 Nos.

SMS Sterilization wrapping paper sheet (blue/green), Size: 125 x 125 cms Specificaitons: Non-woven, bacterial barrier, single use, light weight, wet penetration resistant.Lowering the risk of puncturing or tearing during wrapping, transport. Comply with EN 868 – 2. Comply with the essential requirement 93/42/EEC Directive and should be CE marked or equivalent. Can be sterilized in steam, EO, Radiation, Formaldehyde and VH2 O2. Pack size: 10 Nos.

Disposable patient leggings Specifications:- knee length size, Polycoated, laminated, non-woven with tiable hem, impervious, stretchable. Pack size: 50 Nos.

Bootleg leggings Specifications:- 1) Colour: any 2) Skid resistance: Yes 3) Dust proof: Yes 4) Well stitched in universal regular size: Yes 5) Should cover the knee: Yes. length should be above knee level. 6) hard elasticized for better grip and easy wear: Yes. Should provide one pair of ties additionally. 7) Disposable: yes 8) Sterile: No 9) Packing: Pair individually packed 10) Shoe size for which item is suitable: 10, 11) Clear indication of size on disposable shoe cover: Yes 12) Material (Non-toxic, medical grade): Non-woven thick fabric. Impervious to fluids:Yes 13) Composition of non-woven material: Spun bond + non woven 14) GSM of non woven material: 40 g/sq.mtrs 16) Submission of Test Report to the buyer on demand from NABL/ILAC accredited or Central Govt. Lab to prove conformity of products to the specification on demand to the buyer: Yes. Pack size: 50 Nos.

Medical staff Apron Specifications:- 1)single use , sterile, disposable medical staff apron with proper neck and arm hole cutting with straps with good resistance to tear 2) Material of apron: Medical grade PE 3) GSM of apron material: > 40 gms per sq.mtrs 4) Thickness: 50 micron and above 5) Width of apron : 65- 75 cms 6) Length of apron: 120 - 140 cms 7)Colour: Blue / green . 8)Sterile: Yes 9) Packing: Individually packed in sterile manner. Submission of test report to the buyer on Form 39 or NaBL/ILAC accredited or Central Govt. Lab to prove conformity of products to the specification on demand: Yes. Pack size: 50 Nos.

Surgical Drapes (OT Sheet) Specifications: Sterile disposable surgical drapes (OT sheet), non-woven material - 100 x 100 cm with opening of 14 x 18 cm in the centre with adhesive borders. Pack size: 25 Nos.

Microporus surgical Paper Tape, adhisive type : Size:- 2.5 cm x 9 m, Air permeable, hypo allergic with good skin adhision. Pack size: 12 Nos.

Disposable umbilical cord clamp Specifications: Single use packed Sterile, ETO sterilized. Polyoxymethylene copolymer/plastic material Interlocking teeth for security lock with a click reopening or slipping when clamped Smooth Edges 5-6 cm long, width 1-1.5 cm when closed. Pack size: 100 Nos.

Self adhesive Sterilization Indicator Tapes for Steam Sterilizer: Material of tape: Crepe / semi crepeed paper. Tape Length: 90 meters. Tape width: 18 mm. Shelf life: 2 years. Colour of tape before steriliation : White. Change of the integrated chemical indicator on the tape by its display of diagonal stripes: yes After the sterilization process is complete, the tape can easily be removed with no adhesive residue:yes. Pack size: 10 Nos.

Wrapper for ETO Sterilization :Size : 7.5cm x 200 mtr. Medical grade sheet should be made of high density polyethylene(HDPE) covers for ETO Sterilization. Wrapper should allows for an effective sterilant concentration to be achieved with inbuilt indicator with resistance to microbial penetration, good tear strength, puncture resistance and clean peel. Inbuilt indicator: Both EO and steam indicators should be printed on the sides. Change of colour after sterilisation should be contrast with initial color and colour change should not be reversible. Indicator ink should not fade in storage or under fluourescent light. Should comply to standards EN ISO 11140-1 , EN ISO 868-3,5 and 6. Paper and plastic as per EN ISO standards. Leakage test method→ ASTMF-1929-98. Bioburden EN ISO 11607. A medical grade 60gsm paper confirming EN 868-3. Brochure to be provided. Pack size: 10 Nos.

Wrapper for ETO Sterilization :Size : 15cm x 200 mtr. Medical grade sheet should be made of high density polyethylene(HDPE) covers for ETO Sterilization. Wrapper should allows for an effective sterilant concentration to be achieved with inbuilt indicator with resistance to microbial penetration, good tear strength, puncture resistance and clean peel. Inbuilt indicator: Both EO and steam indicators should be printed on the sides. Change of colour after sterilisation should be contrast with initial color and colour change should not be reversible. Indicator ink should not fade in storage or under fluourescent light. Should comply to standards EN ISO 11140-1 , EN ISO 868-3,5 and 6. Paper and plastic as per EN ISO standards. Leakage test method→ ASTMF-1929-98. Bioburden EN ISO 11607. A medical grade 60gsm paper confirming EN 868-3. Brochure to be provided. Pack size: 6 Nos.

Wrapper for ETO Sterilization :Size: 20cm x 200 mtr. Medical grade sheet should be made of high density polyethylene(HDPE) covers for ETO Sterilization. Wrapper should allows for an effective sterilant concentration to be achieved with inbuilt indicator with resistance to microbial penetration, good tear strength, puncture resistance and clean peel. Inbuilt indicator: Both EO and steam indicators should be printed on the sides. Change of colour after sterilisation should be contrast with initial color and colour change should not be reversible. Indicator ink should not fade in storage or under fluourescent light. Should comply to standards EN ISO 11140-1 , EN ISO 868-3,5 and 6. Paper and plastic as per EN ISO standards. Leakage test method→ ASTMF-1929-98. Bioburden EN ISO 11607. A medical grade 60gsm paper confirming EN 868-3. Brochure to be provided. Pack size: 4 Nos.

Wrapper for ETO Sterilization :Size : 30cm x 200 mtr. Medical grade sheet should be made of high density polyethylene(HDPE) covers for ETO Sterilization. Wrapper should allows for an effective sterilant concentration to be achieved with inbuilt indicator with resistance to microbial penetration, good tear strength, puncture resistance and clean peel. Inbuilt indicator: Both EO and steam indicators should be printed on the sides. Change of colour after sterilisation should be contrast with initial color and colour change should not be reversible. Indicator ink should not fade in storage or under fluourescent light. Should comply to standards EN ISO 11140-1 , EN ISO 868-3,5 and 6. Paper and plastic as per EN ISO standards. Leakage test method→ ASTMF-1929-98. Bioburden EN ISO 11607. A medical grade 60gsm paper confirming EN 868-3. Brochure to be provided. Pack size: 4 Nos.

Wrapper for Plasma Sterilization (Low temperature hydrogen peroxide Plasma Sterilizer): Size : 3" x 70 mtr. Medical grade sheet, should be made of high density polyethylene (HDPE) and allows for an effective sterilant concentration to be achieved in low temperature hydrogen peroxide gas sterilization to sterilization of heat liable devices. wrapper should be with inbuilt indicator with resistance to microbial penetration, good tear strength, puncture resistance and clean peel. Inbuilt indicator: Change of colour after sterilisation should be contrast with initial color and colour change should not be reversible. Indicator ink should not fade in storage or under fluourescent light. Comply with EN 868-5 and ISO 11607. Free from lead and heavy metals. Brochure to be provided. Pack size: 10 Nos.

Wrapper for Plasma Sterilization (Low temperature hydrogen peroxide Plasma Sterilizer): Size : 6" x 70 mtr. Medical grade sheet, should be made of high density polyethylene (HDPE) and allows for an effective sterilant concentration to be achieved in low temperature hydrogen peroxide gas sterilization to sterilization of heat liable devices. wrapper should be with inbuilt indicator with resistance to microbial penetration, good tear strength, puncture resistance and clean peel. Inbuilt indicator: Change of colour after sterilisation should be contrast with initial color and colour change should not be reversible. Indicator ink should not fade in storage or under fluourescent light. Comply with EN 868-5 and ISO 11607. Free from lead and heavy metals. Brochure to be provided. Pack size: 10 Nos.

Wrapper for Plasma Sterilization (Low temperature hydrogen peroxide Plasma Sterilizer) Size : 10" x70 mtr. Medical grade sheet, should be made of high density polyethylene (HDPE) and allows for an effective sterilant concentration to be achieved in low temperature hydrogen peroxide gas sterilization to sterilization of heat liable devices. wrapper should be with inbuilt indicator with resistance to microbial penetration, good tear strength, puncture resistance and clean peel. Inbuilt indicator: Change of colour after sterilisation should be contrast with initial color and colour change should not be reversible. Indicator ink should not fade in storage or under fluourescent light. Comply with EN 868-5 and ISO 11607. Free from lead and heavy metals. Brochure to be provided. Pack size: 10 Nos.

Wrapper for Plasma Sterilization (Low temperature hydrogen peroxide Plasma Sterilizer): Size : 20" x 70 mtr. Medical grade sheet, should be made of high density polyethylene (HDPE) and allows for an effective sterilant concentration to be achieved in low temperature hydrogen peroxide gas sterilization to sterilization of heat liable devices. wrapper should be with inbuilt indicator with resistance to microbial penetration, good tear strength, puncture resistance and clean peel. Inbuilt indicator: Change of colour after sterilisation should be contrast with initial color and colour change should not be reversible. Indicator ink should not fade in storage or under fluourescent light. Comply with EN 868-5 and ISO 11607. Free from lead and heavy metals. Brochure to be provided. Pack size: 6 Nos.

ETO Cartridges : Cartridge containing 200gm of 100% ethylene oxide gas, for use in Ethylene Oxide Sterilizer (Capacity : 452 litres). ISO Certified. Size of container: Height- 17.3cm approx., diameter- 5.2cm approx. Brochure to be provided. Pack size: 50 Nos.

ETO cartridges: Cartridge containing 150gm of 100% ethylene oxide gas, for use in Ethylene Oxide Sterilizer (Capacity: 452 litre) ISO certified. Size of container: Height- 15cm approx., Diameter- 4.5cm approx. Brochure to be provided. Pack size: 50 Nos.

Rust Removing soak solution: non toxic, biodegradable, water soluble, non corrosive, non flammable. Capacity 1 litre. Pack size: 10 Nos.

Rapid Multi Enzyme cleaner for manual washing, 1 litre capacity , Pack size: 10 Nos. • Multiple enzymatic concentrate solution with lipases, cellulases, proteases and amylases • Must act against all possible body secretions, compatible to all instruments • Fast acting within 2- 10 minutes, allow safe disposable via the drain after use • Leaves no residue after wash, non corrosive, nonpungent odour, Stable formulation with near neutral pH • Compliance to ISO 13485

Ultra Rapid Multi Enzyme cleaner for Automatic and washing disinfectors, 1 litre capacity, Pack size: 10 Nos. • Multiple enzymatic concentrate solution with lipases, cellulases, proteases and amylases • Film based Polymer technology with controlled enzyme release • Must act against all possible body secretions, compatible to all instruments • Fast acting within 2- 10 minutes, allow safe disposable via the drain after use • Leaves no residue after wash, non corrosive, nonpungent odour, Stable formulation with near neutral pH • Should have scale inhibition properties • Should help retain shine of the instrument • Should be usable for manual, ultra sonic and automatic cleaning systems • Compliance to ISO 13485

Enzymatic Foam Spray, 1 litre capacity, Pack size: 10 Nos. for preventing body secretionscompatible to all instruments. Should keep soiled instruments and scopes moist prior to decontamination. Should have enhanced polysaccharide solubilization exposing biofilm to disinfectant. Should prevent dyring of all possible body secretion compatible to all instruments. Solution must have lypase, cellulose, protease & amyloase and advanced proteolytic action. Should have neutral pH 100% biodegradable. Should leave no residue after wash, non-corrosive, nonpungent odour. Stable formulation with near neutral pH.

Instrument cleaning Brushes: Specifications: 7-10 inches long plastic handle with stiff bristle/Soft bristle/Steel bristle/Short bristle on one side and medium bristle on other side. Rate must be quoted for a set of 4 brushes. Pack size: 50 sets

Bowie-Dick steam process indicator Specifications:- disposable single use pack, lead and heavy metal free, ability to preserve indicator sheet for permanent record. Stable colour, colour change is not reversible, indicator ink should not fade in storage or under fluourescent light. comparative images for various results and conclusions should be provided in the pack. Add each pack to have lot numbers and expiry date and a uniform contrast colour change. Brochure to be provided. Pack size: 50 Nos.

Biological Indicator for Steam Sterilization Specifications:- self contained Geobacillus Stearothermophilus - ISO 11138:2017 Parts 1 and 3, ISO 11138-7:2019(en) and european standard certified Biological test pack with auto readers for steam sterilizer, smart read, Stable colour, colour change should not to be reversible, indicator ink should not fade in storage or under fluourescent light. Spore population in the Indicator: More than 105 CFU . Time taken for Biological Indicator Result: rapid read out ( within 30 min preferably). Readout technology: Initially by fluorescence detection and later by PH colour change. Biological indicator ampule should be integrated with type 5 chemical indicators additionally. Shelf life: 2 years. Quality certification report regarding Spore Population,Z Value,D Value, to be provided. brochure for the BI and incubator to be provided or should be available in the website. compatible incubator should be provided free of cost. Pack size: 50 Nos.

Biological indicator for ETO sterilization Specifications: self-contained biological indicator (BI) that consists of a Bacillus atrophaeus, ISO 11138-1:2017 and ISO 11138-2:2017 standards for ETO sterilizer. rapid read out , smart read, Stable colour, colour change should not to be reversible, indicator ink should not fade in storage or under fluourescent light. Shelf life: 2 years.Time taken for Biological Indicator Result: rapid read out ( within 4 hours preferably). Readout technology: Initially by fluorescence detection and later by PH colour change. Spore population in the Indicator: More than 106CFU . Readout technology: Initially by fluorescence detection later by PH colour change. Biological indicator ampule should be integrated with type 4 / type 5 chemical indicators additionally.Quality certification report regarding Spore Population,Z Value,D Value, to be provided. brochure for the BI and incubator to be provided or should be available in the website. compatible incubator should be provided free of cost. Pack size: 50 Nos.

Biological Indicator for Plasma Sterilizer specifications:- self contained Geobacillus Stearothermophilus - ISO 11138:2017 Parts 1 and 3, ISO 11138-7:2019(en) and european standard certified Biological test pack with auto readers for plasma sterilizer, smart read, Stable colour, colour change should not to be reversible, indicator ink should not fade in storage or under fluourescent light. Spore population in the Indicator: More than 105 CFU . Time taken for Biological Indicator Result: rapid read out ( within 30 min preferably). Readout technology: Initially by fluorescence, later by PH colour change. Biological indicator ampule should be integrated with type 4 / type 5 chemical indicators additionally. Shelf life: 2 years.Quality certification report regarding Spore Population,Z Value,D Value, to be provided. brochure for the BI and incubator to be provided or should be available in the website. compatible incubator should be provided free of cost. Pack size: 50 Nos.

Process Challenge Device for self contained Biological Indicators for Steam sterilization: PCD made of metal with capsule to hold a self contained biological indicator to monitor hollow load in steam sterilization.

Process Challenge Device for self contained Biological Indicators for ETO sterilization: PCD to monitor ethylene oxide process, type test according to EN 1422. The PCD consists of a 4.55 m long SS tube of 3mm dia connected with a capsule holding type self contained biological indicator sealing one end.

Process Challenge Device for self contained Biological Indicators for Hydrogen Peroxide sterilization (Plasma): PCD to monitor hydrogen peroxide process. The PCD made of metal capsule with 2mm diameter and length of 1.5 meter made of silicone tube, designed to hold biological indiator.

Steam Process Indicator Strip EN ISO-11140-1 : 2005 certified Class V Steam Sterilizer. Single use strips for steam sterilizer. compatible with 121°C at 20 minutes/ 134°C at 3 minutes process. Change of colour after sterilisation should be contrast with initial color and colour change should not be reversible. Indicator ink should not fade in storage or under fluourescent light. It should contain colour comparison option after sterilisation for easy confirmation. Indicator color should not change in dry heat. Strip with adhesive option will be preferable for easy documentation. Brochure to be provided. Pack size: 50 Nos.

ETO Process Indicator Strip Specification:-Process indicator should be according to EN ISO 11140 – 1, Class 4 / class 5 indicator for EO gas sterilization. Change of colour after sterilisation should be contrast with initial color and colour change should not be reversible. Indicator ink should not fade in storage or under fluourescent light. It should contain colour comparison option after sterilisation for easy confirmation.Should be lead free. Indicator strip with adhesive option will be preferable for easy documentation. Brochure to be provided. Pack size: 50 Nos.

Plasma (H2O2) Process Indicator Strip Specification:-Process indicator should be according to EN ISO 11140 – 1,Class 4 / class 5 indicator for H2O2 plasma sterilization. Change of colour after sterilisation should be contrast with initial color and colour change should not be reversible. Indicator ink should not fade in storage or under fluourescent light. It should contain colour comparison option after sterilisation for easy confirmation.Should be lead free. Indicator strip with adhesive option will be preferable for easy documentation. Brochure to be provided. Pack size: 50 Nos.

Cleaning Indicator for Water Disinfector: Chemical indicator to monitor cleaning proess of Washer Disinfetor, Ultrasonic Washer and manual washing. Non-toxic, should be dissolved with most of the cleaning agent. Self adhesive for easy documentation. Indicator should be validated against test soil according to ISO 15883-5. Indicator should be compatable for the cleaning procedure for hollow instruments and hollow PCD. Pack size: 200 Nos.

Batch Monitoring chemical Indicator strip for Bowie Dick Test : Air Removal Chemical Indicator strip (Type 2) for Bowie Dick process challenge device (PCD) with adhesive option for easy documentation. Indicator color should not change in dry heat. Air Removal Test according to EN 285 (7kg) or AAMI/ANSI/ST79 (4kg Test) and Validated according to the test method of ISO 11140-1+5 for steam sterilization. 10 nos. of Stainless steel PCD - EU version, according to EN ISO 11140-4 and hollow load test according to EN 867-5 ( Brochure to be provided) to be provided free of cost. Complete Data sheet of both batch monitoring chemical Indicator for Bowie Dick test/ PCD and sample should be submitted. Pack size: 200 Nos.

Batch Monitoring Chemical Indicator strip for steam sterilization: Type 2 chemical indicator to be used in Compact PCD for steam sterilization according to EN ISO - 11140-1 and lab report EN ISO 17025. Indicators should have adhesive for easy documentation and should not change color in dry heat as per EN ISO - 11140. 10 Nos. of compatible Compact stainless steel Process Challenging Device (PCD) – Specific Load Test according to EN ISO 11140-1.( Brochure to be provided) should be provided on free of cost. Complete Data sheet of both batch monitoring chemical Indicator / PCD and sample should be submitted. Pack size: 200 Nos.

Batch Monitoring Chemical Indicator strip for EO sterilization : Class-2 Chemical indicator to monitor ethylene oxide sterilization compatible to the stainless-steel helix PCD as per EN 1422. Should be lead free. Should be with adhesive for easy documentation. 2 Nos. of compatible Metal stainless steel Process Challenge Device (PCD) for Batch Monitoring System (BMS) -according to EN 1422 Type test for large sterilizer as per EN 285 ( Brochure to be provided) should be provided on free of cost. Complete Data sheet of both batch monitoring chemical Indicator / PCD and sample should be submitted. Pack size: 200 Nos.

Batch Monitoring Chemical Indicator strip for H2O2 (Plasma) sterilization Type 2 chemical indicator to be used in Helix PCD according to EN ISO - 11140-1 and lab report EN ISO 17025. Indicators should have adhesive for easy documentation. 3 Nos. of compatible Helix Process Challenge Device (PCD) for Batch Monitoring System (BMS) according to EN ISO 11140-1 ( Brochure to be provided) should be provided on free of cost. Complete Data sheet of both batch monitoring chemical Indicator / PCD and sample should be submitted. 3 Nos. of PCD device should be provided on free of cost. Pack size: 200 Nos.

Documentation Label for Steam Sterilization Specification: - 3 line Documentation label with integrated steam indicator with adhesive base. Should comply with EN ISO 11140-1. Indicator colour should change only in steam sterilization, not in dry heat. Rate must be Quoted per label, not per roll. 3 Nos. Label guns with ink should be provided for each 25000 Nos. of labels, on loan basis. Pack size: 500 Nos. per roll

Documentation Label for ETO Sterilization. Specification: - 3 line Documentation label with integrated steam indicator with adhesive base. Should comply with EN ISO 11140-1. Rate must be Quoted per label, not per roll. 2Nos. of Label gun with ink should be provided for each 25000 Nos. of labels, on loan basis. Pack size: 500 Nos. per roll

Documentation Label for Plasma Sterilization. Specification: - 3 line Documentation label with integrated steam indicator with adhesive base. Should comply with EN ISO 11140-1. Rate must be Quoted per label, not per roll. 2 Nos. of Label gun with ink should be provided for each 25000 Nos. of labels, on loan basis. Pack size: 500 Nos. per roll

Spinal Needle with Whitacre Pencil Point Size: 25G x 90mm Specifications: - Sterile, disposable, Whitacre pencil point, individually packed. Graduated metal introducer & translucent hub with colour coding, should be of good quality material and pack without any risk of breach in sterility. ETO/Gamma sterilized. Pack size: 50 Nos.

Spinal Needle with Quincke Type Point Size: 23G x 90mm Specifications: - Sterile, disposable, Quincke type point, individually packed. Translucent hub with colour coding, should be of good quality material and pack without any risk of breach in sterility. ETO/Gamma sterilized. Pack size: 50 Nos.

Spinal Needle with Quincke Type Point Size: 25G x 90mm Specifications: - Sterile, disposable, Quincke point, individually packed. Translucent hub with colour coding, should be of good quality material and pack without any risk of breach in sterility. ETO/Gamma sterilized. Pack size: 50 Nos.

Heat Resistant Gloves: Specifications: Long (upto elbow), resistant to high temperature, to be used in Autoclave, heat resistant and preserved material, smooth finish with good hand grip and full fingered, large size: 24"..Pack size: 50 Nos.

Thermal Printer Roll: Compatible for use in Ethylene Oxide Sterilizer (capacity : 452 litres). Size : 2.3" x 10 mtr. Roll. Pack size: 50 Nos.

Thermo seal Tape: Used to pack the surgical trays for steam sterilization. size 18mm × 50mts. Material: Crepe paper with natural rubber adhesive for medical use. Should sustain temperature of 134˚c in a autoclave. Should not leave the adhesive behind after sterilization. Pack size: 50 Nos.

Sterile Cotton Gauze with radio-opaque line marker, Size: 5 x 5 cms, 16ply, type 20 The marker should be made up of multifilament yarn with at least 60% barium coated which will not break or come out separately during usage. Each should have folded edges to avoid fraying of the fabric. The material should have beean bleached using hydrogen peroxide. Each pack should have ETO sterilized with double sealed blister pack for secured sterility with sterility indicator. Each pouch should contain 5 pieces. Pack size: 20 pouches.

Sterile Cotton Gauze with radio-opaque line marker, Size: 7.5 x 7.5 cms, 16ply, type 17 The marker should be made up of multifilament yarn with at least 60% barium coated which will not break or come out separately during usage. Each should have folded edges to avoid fraying of the fabric. The material should have beean bleached using hydrogen peroxide. Each pack should have ETO sterilized with double sealed blister pack for secured sterility with sterility indicator. Each pouch should contain 5 pieces. Pack size: 20 pouches.

Sterile Cotton Gauze with radio-opaque line marker, Size: 7.5 x 7.5 cms, 16ply, type 20 The marker should be made up of multifilament yarn with at least 60% barium coated which will not break or come out separately during usage. Each should have folded edges to avoid fraying of the fabric. The material should have beean bleached using hydrogen peroxide. Each pack should have ETO sterilized with double sealed blister pack for secured sterility with sterility indicator. Each pouch should contain 5 pieces. Pack size: 20 pouches.

Sterile Cotton Gauze with radio-opaque line marker, Size: 10 x 10 cms, 16ply, type 17 The marker should be made up of multifilament yarn with at least 60% barium coated which will not break or come out separately during usage. Each should have folded edges to avoid fraying of the fabric. The material should have beean bleached using hydrogen peroxide. Each pack should have ETO sterilized with double sealed blister pack for secured sterility with sterility indicator. Each pouch should contain 5 pieces. Pack size: 20 pouches.

Sterile Cotton Gauze with radio-opaque line marker, Size: 10 x 10 cms, 16ply, type 20 The marker should be made up of multifilament yarn with at least 60% barium coated which will not break or come out separately during usage. Each should have folded edges to avoid fraying of the fabric. The material should have beean bleached using hydrogen peroxide. Each pack should have ETO sterilized with double sealed blister pack for secured sterility with sterility indicator. Each pouch should contain 5 pieces. Pack size: 20 pouches.

Sterile Surgical Mopping Pad with radio-opaque line marker and a coloured loop, Size: 30 x 30 cms, 8ply, type 17. The marker should be made up of multifilament yarn with at least 60% barium coated which will not break or come out separately during usage. Each should have folded and stitched edges to avoid fraying of the fabric. The material should have beean bleached using hydrogen peroxide. Each pack should have ETO sterilized with double sealed blister pack for secured sterility with sterility indicator. There should be a coloured loop for identification. Pack size: 50 Nos.

Sterilization containers with compatible SS basket for steam sterilization : Dimension of container in mm: (380 x 300 x 85), inner basket measuring (240 x 240 x 50)mm. stainless steel container should be AISI 304 grade, an austentic stainless steel with exceptional mechanical resistance and highly resistant corrosion. Container lid should have to be provided with a protected valve system that assures a mechanical control of steam penetrations and sterility preservation. The valve of container should be made in aluminum, consists of single lid, protected by round cup,only in lid to assure perfect tightening during transport. One piece gasket. Inner SS basket with lid should be made up of AISI 304 grade stainless steel, perforated sheet with two handles. container should have atleast 7 years of warranty. comply with EN ISO 17665-1, 16707-1 standards.

Sterilization containers with compatible SS basket for steam sterilization : Dimension of container in mm: 460 x 300 x 210, inner basket measuring (400 x 240 x120)mm. Stainless steel container should be AISI 304 grade, an austentic stainless steel with exceptional mechanical resistance and highly resistant corrosion. Container lid should have to be provided with a protected valve system that assures a mechanical control of steam penetrations and sterility preservation. The valve of container should be made in aluminum, consists of single lid, protected by round cup,only in lid to assure perfect tightening during transport. One piece gasket. Inner SS basket with lid should be made up of AISI 304 grade stainless steel, perforated sheet with two handless. containers should have atleast 7 years of warranty. comply with EN ISO 17665-1, 16707-1 standards.

Sterilization containers with compatible SS basket for steam sterilization : Dimension of container in mm: (600 x 300 x 260), inner basket measuring (540 x 240 x 180)mm. stainless steel container should be AISI 304 grade, an austentic stainless steel with exceptional mechanical resistance and highly resistant corrosion. Container lid should have to be provided with a protected valve system that assures a mechanical control of steam penetrations and sterility preservation. The valve of container should be made in aluminum, consists of single lid, protected by round cup,only in lid to assure perfect tightening during transport. One piece gasket. Inner SS basket with lid should be made up of AISI 304 grade stainless steel, perforated sheet with two handless. containers should have atleast 7 years of warranty. comply with EN ISO 17665-1, 16707-1 standards.

Sterilization Tray: Size: 12"x8"x3" Anodised aluminium sterilization trays for Steam/ETO/Plasma sterilization. Tray must have peroforations on all sides with perforated lid attached/fixed to the broader side with a SS 304 hinge. Should have silicon leg holders at the bottom corners for protection. Lid shoul have SS304 sliding type lock on one side and SS304 hinge on the other side. Should have perforated silicon matt without bristles. Should have continuous silicon holders for holding instruments. Tray should be anodised to avoid corrosion and biocompatible. Should have 5 years replacement warranty.

Sterilization Pouches, Size: 250mmx90mmx50mm: Should be made of medical grade paper with controlled porosity and good water resistance. Bottom of the bag is thermo-adhesive sealed and the open side of the bag has a thermo sealed band (Heat sealable band) to assure its hermetical closing. The sides of the bag have a gusset that allows the expansion of the bag. Comply with EN ISO. Pack size: 100 Nos.

Sterilization Pouches, Size: 25mmx140mmx750mm: Should be made of medical grade paper with controlled porosity and good water resistance. Bottom of the bag is thermo-adhesive sealed and the open side of the bag has a thermo sealed band (Heat sealable band) to assure its hermetical closing. The sides of the bag have a gusset that allows the expansion of the bag. Comply with EN ISO. Pack size: 100 Nos.

Tray Liner: For keeping in the bottom of the instruments tray to obsorb the moisture during the steam sterilisation process. size 55cm x 18cm. Pack size: 100 Nos.

Door Gasket for steam sterilizer: Should be made of silicon rubber for durability and heat resistance upto 250oC. Shape and size: Round type, 17mm dia, 2.5 metre length. Hadness: 40-50 Shore A. Tube type

Float Switch: Side mounted threaded, water level for pre heating tank.

Heating Element Gasket: Metalic type, 10.5cm dia

Heating Element with washer, 8Kw capacity: Flange type, 3.5" size, compatible for use in microprocessor controlled, high pressure, fully automatic, 36KW, double door Steam Sterilize

Heating Element with washer, 9Kw capacity: Flange type, 3.5" size, compatible for use in microprocessor controlled, high pressure, fully automatic, 36KW, double door Steam Sterilize

Heating Element with washer, 12Kw capacity: Flange type, 3.5" size, compatible for use in microprocessor controlled, high pressure, fully automatic, 36KW, double door Steam Sterilize

Pressure Switch for pressure pump, Make: Danfoss, Range: 0.2 to 7.5 Bar

6mm Air hose, polyurethane make

8mm Air hose, polyurethane make

6mm Air hose, teflon type, polytetrafluorotheylene (PTFE)

8mm Air hose, teflon type, polytetrafluorotheylene (PTFE)

Solenoid valve, water type, 1/2" diaphragm, 240 V AC,

Solenoid valve, 24V/AC

Water level sensor

Wireless Keyboard with mouse for computer

6mm Air Hose Elbow, S.S., male type

6mm Air Hose Elbow, brass., male type

Temperature Sensor, Thermistor

Door Control (Fasto valve), 322 MEA, Max. 10 bar

Door Control Piston, Cylindrical type, single rod, single acting (12mm)

Wire (Industrial standard), 6sq.mm, Colour: Red/Black. Rate must be quoted per coil.

Silicone Grease: High vacuum, more than 200oC, capacity: 250gm

Thermostat: 0 to 200o / 50 to 200o

4 to 6mm leg with sleeve

Industrial cord terminals end, 6mm

Tube fitting, one touch, 6mm, threaded

Tube fitting, one touch, 8mm, threaded

Tube fitting, one touch, 6mm, coupling

Tube fitting, one touch, 8mm, coupling

Air Preparation Unit (FRL), single type with gauge, 0 to 10 bar gauge valve

Tool Kit, 8 to 32 size

Tools Bag, 12" x 6" x 10"

Clamp Spanner

Pipe Rinch, 12mm

Pipe Rinch, 18mm

Ball Bound Hammer, 1 pound

Adjustable Spanner, 6mm

Adjustable Spanner, 8mm

Adjustable Spanner, 12mm

Grip plier, 8"

Hollow Punch Set

Sizzle Set

Rubber Hammer, 1/2 pound

Solenoid Coil, 220V, compatible for Esteem make washer disinfector

Limit switch for door (Micro limit switch) - Compatible for Esteem make Washer Disinfector

Mini Limit Switch for door, ST-08H

Teflon washer for rotating wings

Pneumatic tubing air hose, 8mm air hose

Gauze/Cotton Cutting machine Blade: SS make, Size:8"

Gauze/Cotton Cutting machine Belt: Round type,

Cable Zip Ties heavy duty: Colour : White/Black, self locking, heat resistant, hight tensile strength, plastic wire, nylong teeth grip plastic ties. Length: 150mm, breadth: 5mm. Tensile strength: 15kg. Heat resistance: should be resistant to 130oC maximum tempearture. Pack size: 100 Nos.

Engraving Machine: It should be an easy to use hand held device, ergonomically designed for firm grip. Should engrave on metal, glass, wood, plastic and ceramic with carbide tip. Should have a speed controller

EO Gas Detector: Specifications: It should measure EO concentration from 0 to 99 PPM gas concentration. It should be microprocessor controlled wall mounting gas deductor. Should have audible alarm signal ranging 85-95 decibal with external alarm output. Should have auto calibration. 220V, 50Hz AC operated. Visual & audible alarm warning. Acrylonitrile butadiene styrene feature box. Should have digital display with wireles data transmission. Electro chemical sensor. Deductor should display green led light when it deducts standard PPM values and red lamp should light up when the PPM value exceeds which gives alarm warning. 3 years of warranty.

Non - Consumables

Loading Trolley (Open Type): Made of stainless steel 304 grade. Size: 59” length, 32” breadth, 33” height (including wheel). Wheel: 8” nylon wheel. Two shelves, bottom shelf 11” above from floor level and top shelf, 22” from bottom shelf. Handle: 15” above top shelf. Thickness of sheet: 16 gauge. 1 ½ “ dia tube. 360o rotating wheels on the handle side and 90 degree wheels on the other side. 2 wheels should have brake. Both shelves should have three stiffness for reinforcement. All cornors should be free from burs

Loading Trolley (Closed Type): Made of stainless steel 304 grade. Size: 59” length, 32” breadth, 33” height (including wheel). Closed on three sides with SS sheet and one wide with double doors. Latch lock inside of one door and outside pad lock. Wheel: 8” nylon wheel. Two shelves, bottom shelf 11” above from floor level and top shelf, 22” from bottom shelf. Handle: 15” above top shelf. Thickness of sheet: 16 gauge. 1 ½ “ dia tube. 360o rotating wheels on the handle side and 90 degree wheels on the other side. 2 wheels should have brake. Both shelves should have three stiffness for reinforcement. All cornors should be free from burs

CSSD Shifting Trolley: Made of stainless steel 304 grade. Size: 75” length (including 3" handle on both sides) , 30” breadth, 33” height (including wheel). Closed on three sides with SS sheet and one wide with double doors. Latch lock inside of one door and outside pad lock. Wheel: 8” nylon wheel. Two shelves, bottom shelf 11” above from floor level and top shelf, 22” from bottom shelf. Handle: 15” above top shelf. Thickness of sheet: 16 gauge. 1 ½ “ dia tube. 360o rotating wheels on the handle side and 90 degree wheels on the other side. 2 wheels should have brake. Both shelves should have three stiffness for reinforcement. All cornors should be free from burs

CSSD Open Transport Trolley: Made of MS powder coated. Size: 75” length (including 3” handle on both sides), 30” breadth, 33” height (including wheel). Wheel: 8” nylon wheel. Two shelves, bottom shelf 11” from floor level and top shelf, 22” from bottom shelf. Top tray should be welded. Bottom frame should be 60”. Thickness of sheet: 16 gauge. 1 “ square tube. 360o rotating wheels on both side, 2 wheels with brake and 2 wheels without brake. Both shelves should have three stiffness for reinforcement. All cornors should be free from burs.

CSSD Closed Transport Trolley: Made of stainless steel 304 grade. Size: 48” length, 24” breadth, 48” height (including wheel). 4 Wheels: 8” nylon wheels. One middle shelf 20” from bottom tray. 1” square tube with 16 gauge. Vertically splitted two doors. Handle on one side, 36” above from floor level with 360 degree rotating wheels. Corner buffer on both sides. One door should have latch lock inside and pad lock on outside. All cornors should free from burs.

CSSD Basket Transport Trolley: Made of stainless steel 304 grade. Size: 18” length, 18” breadth, 60” height (including 4” wheel). 4 Wheels: 4” nylon wheels. 4 baskets on each side(mesh type). Entire frame with 25mm dia and 18 gauge thickness. All cornors should be free from burs.

CSSD Storage Rack: Made of stainless steel 304 grade. Size: 48” length, 18” breadth, 72” height. No. of compartments: 4, No. of shelves: 3. Each shelf should have 3 side stopper provision by 4” SS sheet. Each shelf should have 10mm rod and 2” gap between rods. Gap between each shelf is 15”. 10” gap between floor to bottom shelf. All cornors free from burs.

CSSD Storage Table: Made of stainless steel 304 grade. Size: 90” length, 30” breadth, 30” height. Vertical tubes of size 50 square tube with 16 gauge (6 legs). Horizontal tube 50mm x 70mm rectangle tube. Two shelves. Bottom and top shelves should have 12mm thick rod on both sides. Centre frame should be 84”. Top shelf should be with rounded edge. All the corners of edge should be rounded. All cornors should be free from burs.

CSSD Sterile Storage Cabinets Specifications: Material S.S. 304 grade. Size: 40"x 15"x 60"(LXBXH), 4 shelves, double doors with lockable facility and UV lights.

Gauze / Cotton Cutting Machine Straight knife fabric cutting machine, Cuting Speed: 3000-3500 rpm, Motor: Electric, 750w Volt: 220-230v, Blade: length: 8". Frequency: 50Hz or 60 Hz.Cutting height: 6" -13". Two years warranty. ( Brochure to be provided).

Hydraulic Hand Pallet Truck with Forks: Capacity 2 tonnes. Built with reinforced steel fork of size: 1150 x 550mm. Equipped with 210o turning radius and PU-coated wheels for steering. Ergonomic Handle with integrated 3-function control (Lift/Neutral/Lower) for efficient operation. Sealed and leak proof pump for consistent lifting.

Drying Cabinet for CSSD: Should be automatic in operation. Inner chamber should be made up of stainless steel and outer chamber should be of epoxy painted CRCA sheets. Should have heaters of minimum 1.5 KW. There should be provision for setting the drying temperature and drying time. Approximate capacity 200L or more with shelves to keep trays ( Brochure to be provided). 3 years warranty

ATP complete handheld device: A reliable, quick, easy use ATP meter measuring RLU to check for microbial contamination to measure the efficacy of cleaning protocols on surgical instruments and non-critical surfaces. Firm suppose to be provide compatible 50 swab free of cost along with the ATP meter.