IMPROVEMENT TO OMQ AT AF STN GWALIOR

Amount

Demolition of plain cement concrete (unreinforced) of any mix / grade in ground floor and pavings not exceeding 15cm thickness (below or above ground level) including removal of debris out off the AF station premises / MOD land etc complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor finished even and fair (without using extra cement) for laying floor finishes etc complete all as specified and directed.

M&L for 15mm thick for screed bed/bedding layer in CM 1:6 for laying floor finishes etc, complete all as specified and directed.

M&L for 8-9mm thick vitrified ceramic tiles (double charged/Ultra charged) of size 600 X600 mm (square), polished, in floors etc set, jointed in neat cement slurry and pointed in white or coloured cement to match the colour/shades of tiles complete all as specified and directed.

All as per item No 1.05 here-in-before but on vertical surface such as skirting, dado etc complete all as specified and directed.

M&L for premium quality non skid joint free coloured ceramic floor tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc set & jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles complete all as specified & directed.

M&L for 15mm thick rendering on fair faces of brickwork or on concrete surfaces in CM 1:4 surface finished fair and even as in backing coat of skirting/dados etc, complete all as specified and directed.

M&L for glazed ceramic digitally designed coloured tiles 450 mm X 300 mm X 7 mm thick with highlighter on vertical surface such as skirting / dado etc ,set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles etc complete all as specified & directed.

M&L for Glazed ceramic coloured tiles of approved design pattern of size 300X200X 7mm thick with highlighter on vertical surface such as skirting / dado etc ,set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles etc complete all as specified & directed.

M&L for screed bed / bedding layer 20mm thick in CM 1:6 for laying of floor finishes etc complete all as specified and directed.

M&L for 20-25 mm thick machine cut mirror polished kota stone slab flooring with Kota stone of size 550X550mm , laid over cement screed bed & jointed with neat cement slurry mixed with pigment to match the shade of the slab including rubbings & polishing with bee wax polish complete all as specified and directed.

M&L for 20-25 mm thick machine cut kota stone slab on stair case steps in one piece of required length & width as per site and laid over cement screed bed and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.

Demolition of brickwork of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars including segregation of serviceable bricks for reuse & removal of rubbish out off the AF station premises / MOD land etc complete all as specified and directed.

M&L for brick work with sub-class ‘B’ bricks old size , straight or curved on plan exc 6m mean radius in built in CM 1:4, complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, chajjas, staircases, landings and similar suspended work (reinforcement cut as required to facilitate demolition) including removal of debris out off the premises / MOD land complete all as specified & directed.

M&l for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms etc in one piece as required size and laid over cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

Taking down cement or cement lime plaster work any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L form rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surface of walls, fins, facia etc upto (G+1) height mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer instructions, finished even and smooth without using extra cement etc complete all as specified and directed. Note: (i) WPC will be measured and paid separately. (ii) Cost of formwork shall be included in quoted rate of this item. (iii) Rendering will be done in two layers, first layer 10-12mm thick and 2nd layer of 3-5mm thick.

Material and Labour for rendering 15 mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.

Material and Labour for rendering 5 mm thick in cement mortar (1:3) on concrete surface of ceiling finished even and smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound of approved make all as specified and directed.

M&L preparing new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new surface of walls and apply two coats distemper oil emulsion (OBD) with roller finish over a coat of cement wall primer from same manufacturer of (OBD) over and including layer of wall care putty not less than 2mm thick completed all as specified & directed.

M&L for complete removal of existing treatment from wall (any number of layers) by rotary scrappers/sand cutting machine to achieve paint/periodicals free even and smooth finish plastered surfaces and applying two coats of distemper oil emulsion (OBD) with roller finish over a coat of cement wall primer (from same manufacturing of OBD) over and including layers of wall care putty not less than 2mm thick completed all as specified & directed.

M&L for preparing old plastered or un-plastered surfaces of walls and applying one coat of white wash complete all as specified and directed .

M&L for preparing old plastered or un-plastered surfaces of ceilings and applying one coat of white wash complete all as specified and directed .

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each etc. including builders hardware etc. complete all as specified and directed .

Taking down shutters of any description exc 01 sqm but not exc 2 sqm each complete all as specified and directed.

M&L for taking down and refixing in same opening shutter exceeding 1 sqm but not exceeding 2.00 sqm including easing, adjusting and refixing with same hardware including renewal of unserviceable screws, etc. complete all as specified and directed. Note: Renewal of builder's hardware articles, if specially ordered, shall be paid for at 'supplied only' rates

Supply and fix pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, minimum 4Nos of hinges SS 125mm long, lock strike plate including PCC (1:2:4) type B-0 for back filling of chowkhat, etc complete all as specified and directed.

S&F pressured steel frames of size 105x60mm for door with one or more rebates including necessary fixing lugs/holdfast, hinges (SS butt hinges 125mm long 4Nos), lock strike plate including PCC (1:2:4) type B-0 for back filling of frame/chowkhat complete all as specified and directed.

S&F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm plain colour PVC Sheet on back face with wood free solid PVC complete all as specified and directed.

S&F factory made 35mm thick 2nd class HW skeleton shutters, open rebated and prepared to receive glass, gauze, etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars any numbers. and mitred beads for securing wire gauge, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) Kiln seasoned & chemically pressure treated complete all as specified and directed.

S&F for factory made 35 mm thick IInd class hard wood Plain framed, panelled shutter (two panel) with lock rail & panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & stile as per IS: 1003 (Part I), Kiln seasoned & chemically pressure treated complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube fixed with 75mm long stainless steel screws with PVC fasteners to wall including repair of jambs of wall & finishes complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.

S&F for 150 mm long aluminium anodised barrel tower bolt extruded section complete all as specified and directed .

S&F for 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed .

S&F for 125mm long SS butt hinges medium weight, complete all as specified and directed .

S&F for 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F for floor door stopper of aluminium alloy body and tongue ,anodised with hard drawn steel spring, over all length of cover plate 150 mm complete all as specified and directed .

S&Ffor mild steel 300 mm, ordinary rat tail rod pattern springs for doors including roller and roller plate complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth by filler coat with grey filler or liquid wood filler, transparent and bringing forward surfaces to smooth even finish and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description, not otherwise described over 10cm width or girth by filler coat with grey filler or liquid wood filler transparent and bringing forward surfaces to smooth even finish and apply two coat of synthetic enamel paint complete all as specified and directed.

Supply and fix in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed.

S&F for 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square/ rectangular, not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F for coloured powder coated aluminium strip of size not less than 30 mm wide with brush lining fixed at bottom of wooden/aluminium door to cover gap between door and floor complete all as specified and directed.

S&F for factory made steel window with combined frame for side hung openable double shutters, ie glazed shutters with glazing bars dovetail or welded. and another side, wire gauge shutters without glazing bars dovetail or welded including box type hinges with steel handles and steel peg stays in both glazed and wire gauge shutters including 08 Nos lungs ( Total four numbers shutters ie. two numbers openable glazed shutters on one side and two numbers wire gauzed shutters on another side of window frame) complete all as specified and directed.

Taking up or down steel water tubing and connections of 15mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down steel water tubing and connections of 20mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

Supply and fix 15 mm bore GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors complete all as specified and directed.

Supply and fix 20 mm bore GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors complete all as specified and directed.

M&L cutting chases for concealed water tubing and making good in CM 1:3, on brick wall, etc., cutting n.exc 10 cm in girth complete all as specified and directed.

S&F in repair of fancy type, brass, chromium plated overhead shower of size not less than 100x100mm square with swivel joint & arm not less than 250 mm long, screwed down for 15mm bore iron pipe complete all as specified and directed.

Supply and fix in repair Vitreous China wash down water closet pan (pedestal pattern), white including seat cover, fixing bolt, connection to drain with 'P' or 'S' trap, flush pipe and anti syphonage pipe and including lime concrete bedding complete all as specified directed.

Supply and fix in repairs WC squatting pan " Orissa Pattern" of size 580 X 440 mm white with integral foot rest including PVC P or S trap, front or back inlet and making connection to trap and to flushing cistern and including lime concrete bedding complete all as specified and directed.

Supply and fix in repairs PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including dual flush system valve float and handle, PVC flush pipe 32 mm bore and brackets complete set all as specified and directed.

Supply and fix in repair PVC connections 15mm size with PTMT nuts of length 450 mm, complete all as specified and as directed.

S&F in repair 15mm bore bib taps, two way cast copper quarter turn valve handle with water saving nozzle, chromium plated fancy type complete all as specified and directed.

S&F in repair 15mm bore stop cock angular type cast copper alloy, screwed down high pressure, quarter turn valve handle with water saving nozzle, screwed both ends for iron pipe or for unions chromium plated fancy type complete all as specified and directed

S&F for stainless steel sinks with drainage board, made out of 1.00 mm thick sheet for kitchen or laboratory with plug, washers and waste pipe, cast iron cantilever brackets, or bedding in cement mortar to dwarf wall and connecting union overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including 40mm dia PVC flexible pipe upto floor level of length not less 0.60 meter complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipe 100/75 mm dia jointed in cement mortar and taking out of trenches complete all as specified

S&F for 100 mm bore cast iron spun soil, waste and vent pipe in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

S&F for 100 mm bore cast iron spun soil, waste and vent pipe in any length with or without ears with cement joints laid in walls fixed with suitable length of FI clamp of size 25x 3 mm, ( FI clamp shall be fixed with two numbers nut and bolts of size 50 mm long 8 mm dia with suitable size of rawl plug on each clamp) at the rate of 1.20 mtr centre to centre complete all as specified and directed.

S&F for 75 mm bore cast iron spun soil, waste and vent pipe in any length with or without ears with cement joints laid in walls fixed with suitable length of FI clamp of size 25x 3 mm, ( FI clamp shall be fixed with two numbers nut and bolts of size 50 mm long 8 mm dia with suitable size of rawl plug on each clamp) at the rate of 1.20 mtr centre to centre complete all as specified and directed.

S&F for cast iron soil waste bends for 100 mm bore of pipe (any radius) duck`s foot or heel rest complete all as specified and directed.

S&F for cast iron soil waste bends for 75 mm bore of pipe (any radius) plain bend complete all as specified and directed.

S&F for cast iron branch pieces of 75mm bore pipe, single (equal or un equal) ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors complete all as specified and directed.

S&F for cast iron bend (any radius) diminishing pieces or tapers (larger bore measured) with oval access door for 100 mm cast iron soil waste pipe complete all as specified and directed.

S&F for CI socket (double) collars for 100mm dia pipe with cement joint fixed to wall complete all as specified and directed.

S&F for cast iron floor trap, for 75mm diameter of outlet with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 (using 20 mm graded stone agg) complete all as specified and directed.

S&F for in repair stainless steel grating of size 100 mm dia complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 20 mm bore GI medium grade over flow ( 450mm long) and washout pipe (600 mm long ) with fittings including dismantling of existing tank and lowering down etc complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 20 mm bore GI medium grade over flow ( 450mm long) and washout pipe (600 mm long ) with fittings including dismantling of existing tank and lowering down etc complete all as specified and directed.

S&F for 20 mm bore of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight not less then 210 gms) complete all as specified and directed.

S&F for in repairs 20 mm bore gun metal, globe or gate valves, half turn with iron wheel head screwed down screwed both end for iron pipe complete all as specified and directed.

S&F for colour powder coated aluminium frame for doors windows, & ventilators with one or more rebates or aluminium section of two or more tracks in case sliding windows including jointing cleat for fixing (minimum thickness of powder coating shall be 50 micron) complete all as specified and directed. Note :- (i)Colour of powder coating shall be approved by GE. (ii) wire mesh and sheet glass shall be measured and paid separately under respective items.(iii) Weight of only aluminium section used for fabrication of door/window shall be measured for payment)

S&F for colour powder coated aluminium window/ventilator shutters including necessary jointing cleats, glazing clips, rubber neoprene packing, powder coated aluminium snap beading, stainless steel screw etc including star locks, roller in case shutter in sliding window, (minimum thickness of powder coating shall be 50 micron) complete all as specified and directed. Note :- (i)Colour of powder coating shall be approved by GE. (ii)The unit rate shall be deemed to be included rubber neoprene packing, stainless steel screws, star locks & roller in case sliding window

S&F for 4mm thick sheet glass, ordinary quality in square area exceeding 0.50sqm each pane complete all as specified & directed.

S&F for colour powder coated aluminum grills with aluminum frame fixed with stainless steel screws in window/ventilator openings complete all as specified & directed. Note :- (i) Colour of powder coating shall be approved by GE. (ii) The unit rate shall be deemed to be included stainless steel screws. (iii) The weight of aluminum grill shall not be less than 4.00 kg per sqm .

M&L for preparation of new steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Material and Labour for preparation of old painted steel surfaces of any description, over 10 cm width or girth and applying two coat of synthetic enamel paint (ordinary tint), complete all as specified and directed.

S&F for Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repair sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass with chromium plated bracket guard and railing. Size of corner shelf shall be 30 cm x 30 cm and rounded 30 cm arc complete all as specified and directed. Note :- The design of corner shelf shall be as approved by GE.

S&F in repair 15 mm bore wash hand basin mixer (quarter turn with water saving nozzle), brass, chromium plated, for mixing hot and cold water screwed down high pressure with or without lettered Hot & Cold with long screwed shank, nuts screwed for iron pipe complete all as specified and directed.

S&F in repair of vitreous china wash basin, white with pedestal, flat base size 550mmx400mm including with 32mm dia coupling, PVC flexible pipe of 32mm dia, complete all as specified and directed.

S&F in repair 15mm bore brass chromium plated fancy type wall mixer (quarter turn with water saving nozzle) for mixing hot and cold water screwed down high pressure with or without lettered Hot & Cold with long screwed shanks with bend pipe screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm dia chromium plated brass sink mixer (quarter turn with water saving nozzle) with swivel spout (wall mounted) for mixing hot and cold water, screwed down for 15mm bore GI pipe complete all as specified & directed.

S&F in repair brass chromium plated hands health faucet with flexible pipe length not less than 1.00 mtr suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair stainless steel toilet paper holder, twin type fixed to wall with brass screws and rawl plugs complete all as specified and directed.

S&F in repair tubular towel rail 20mm dia stainless steel of size 60cm long fixed to wall with brass screws and rawl plugs complete all as specified and directed.

S&F in repair 25mm dia stainless steel curtain rod heavy duty (304grade) with suitable fancy brackets and heads etc complete all as specified and directed.

S&F in repair 1.00 mm thick stainless steel plate rack of overall size 600x900x100 mm of standard pattern complete all as specified and directed. Note: Pattern shall be approved by GE.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted into spikes, framed guard bars, , barred iron doors, ladders, framed balusters, walk ways, railing, cooler platform, frame work of water tanks and similar work including welding conforming to Fe-290-0 & grade E-165 etc complete all specified and directed.

M&L for providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along the external wall below concrete or masonry apron using chemical emulsion at the rate of 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M&L for post construction anti termite treatment of soil under existing floors using emulsion at the rate of one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.

S&F in repair 18mm thick solid UPVC ply of 1st quality, one side pre laminated of approved colour and one side white colour fixed with screwes, solvent cement /adhesive to make kitchen cabinet and cupboard shutters including dismantling complete all as specified and directed.

S&F for 12mm thick solid UPVC ply of 1st quality of both side plain white colour fixed with screws, solvent cement /adhesive to make kitchen cabinet side top and bottom, shelves inside the cabinet and shutter or drawer including dismantling complete all as specified and directed.

S&F for soft closing hinges O 'Degree' (304 grade) stainless steel,clipon with silent close 100% water proof fully overlay (0) crank as per approved sample for kitchen cupboard shutters complete all as specified and directed.

S&F for 150 mm long Hasp and staple, safety type, (304 grade) stainless steel including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F for Stainless steel handle (304 grade) of 110mm size as per approved sample for kitchen cabinet shutter complete all as specified and directed.

S&F for coloured powder coated statinless steel Continuous (piano) hinge, width of flaps (when open) is 30mm complete all as specified and directed.

S&F for stainless steel (SS-304) Plate basket of size 19"x20"x6" as per approved sample complete all as specified and directed.

S&F for stainless steel (SS-304) Cutlery basket of size 21"x20"x4" as per approved sample complete all as specified and directed.

S&F for stainless steel (SS-304) large utensil basket of size 32"'x20"x8" as per approved sample complete all as specified and directed.

S&F for stainless steel (SS-304) cup saucer basket of size 19"x20"x4" as per approved sample complete all as specified and directed.

S&F for stainless steel (SS-304) Thali basket of size 8"x19"x20" as per approved sample complete all as specified and directed.

M&L for 10-12 mm thick machine cut kota stone slab in one piece of required length & narrow width, as in riser of steps/ skirting, dado, laid over cement screed bed & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L for machine cut mirror polish Kota stone slab 20-25mm thick on kitchen platform in one piece of required size not less than 1.50m X .0.50/1.5m x 0.60 m , laid over cement screed bed and jointed with grey cement slurry , pointed to match the shade of the slab incl cutting holes for gas pipe complete all as specified and directed.

M&L for cutting, grinding and mirror polishing of exposed edges of stone like granite/kota stone etc for rounding or chamfering as per approved design , as in steps, cooking platform, and other similar situations complete all as specified and directed.

S&F in repair 15mm bore bib taps cast copper alloy, screwed down high pressure, screwed both ends for iron pipe or for unions chromium plated fancy type (quarter turn with water saving nozzle) complete all as specified and directed.

S&F in repair 15mm bore concealed stop valves cast copper alloy, screwed down high pressure, with quarter turn handle with water saving nozzle, screwed both ends for iron pipe or for unions with long shank and cup chromium plated fancy type complete all as specified and directed.

S&F for cabinet mirror of size 0.45m x 0.30m PVC with cabin as per trade pattern and approved by GE complete all as specified and directed.

S&F for 75 mm bore cast iron spun soil, waste and vent pipe in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

S&F in repair of fancy type 15 mm bore, brass, chromium plated (quarter turn with water saving nozzle) wall mixer with telephonic arrangement & with pipe bend 3-in -1 screwed down for iron pipe including provision of hand shower with flexible pipe length not less than 1.00 mtr complete all as specified and directed.

S&F in repair 18mm thick solid UPVC ply of 1st quality of both side plain white colour fixed with screws, solvent cement /adhesive to make, shelves, partitions and drawers etc kitchen cabinet and cup boards etc including dismantling, complete all as specified and directed.

S&F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face with wood free solid PVC complete all as per specification, drawing and directed.

S&F for 4 mm thick one side frosted and other side plain sheet glass ordinary quality and glazing with oil putty not exc 0.5 sqm each pane complete all as specified and directed.

S&F in repair of stainless steel (304 grade) fancy type towel ring square with round flange fixed with brass screw with wooden/plastic cleats complete all as specified and directed.

S&F in repair of stainless steel (304 grade) fancy type soap dish (304 grade) fixed with brass screw with wooden/plastic cleats complete all as specified and directed.

S&F in repair shower rose of PTMT any colour with swivel joint ( Minimum weight 40 gms) and shower arm 195mm long with bend of 45 degree with flange of PTMT any colour (Minimum weight 40gms) for 15 mm bore iron pipe complete all as specified and directed.

Cutting of grooves of size 3mm x 3mm in stone like granite/marble/kota etc as in steps etc complete all as specified and directed.

M&L plain cement concrete 1:2:4 Type B-1 (using 20mm graded stone aggregate) for holdfast/coping/kerbs etc complete all as specified & directed

S&F sliding telescopic channel high grade stainless steel (304 grade) rust proof five ball bearing of size 20-25" as per approved sample complete all as specified and directed.

S&F Magnet catcher for kitchen cabinet shutters as per approved sample complete all as specified and directed.

S&F in repair of stainless steel peg sets of 6 Nos peg set of good quality complete all as specified and directed.

S&F in repair of stainless steel peg sets of 3 Nos peg set of good quality, complete all as specified and directed.

M&L for Preparation of newly plaster surface and applying two coat of exterior weather proof water base emulsion paint over a coat of primer of same manufacturer on walls over and including 3mm thick wall care putty complete all as specified and directed.

M&L for Removing of existing treatment complete on walls & preparation of surface to receive new treatment and applying two coat of exterior weather proof water base emulsion paint over a coat of primer of same manufacturer over and including 3mm thick layer of white cement base putty on walls complete all as specified

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub-base/foundation, etc complete all as specified and directed

M&L for factory made Machine pressed precast interlocking tiles/paver ISI Marked, 60mm thick, coloured , glossy finish of M-35 grade concrete of design & pattern approved by GE & laid dry with different colours of tiles as directed in footpath /hard standing, etc. and filling of joints with fine sand complete all specified and directed

Material and Labour for Sand filling under floor including watering and consolidation complete all as specified and directed.

Surfaces excavation n.exc 30 cm deep and average 15cm deep and getting out complete all as specified and directed

Removal of surplus excavated soil not exceeding 50 Mtr distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

S&F for factory made single extruded WPC (Wood Polymer Composite) Frames/Chowkhat for solid door/window /Ceosetory windows & other, size 50x75mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 of 100 gms) fabricate with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N (Edge) minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property and fire retardant fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia & length complete all as specified and directed.

S&F 30mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both side and both faces covered with approved pattern with decorative coloured laminated (machine pressured) type 1 of 0.9mm thick and all around side faces covered with 10mm thick first class HW liping duly polished complete all as specified & directed.

S&F stainless steel sinks without draining board, made out of 1.00 mm thick sheet for kitchen or laboratory with plug, washers and waste pipe, cast iron cantilever brackets, or bedding in cement mortar to dwarf wall and connecting union, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm including 40mm dia PVC flexible pipe upto floor level of length not less than 0.60 meter complete all as specified and directed.

M&L PCC 1:3:6 type C-2 75mm thick (using 40 mm graded stone aggregate) as in Plinth protection etc complete all as specified and directed.

S&F 150 mm long stainless steel tower bolt fancy type round (dia 10 mm) etc all as specified and directed.

S&F 150 mm long stainless steel door handle fancy type etc all as specified and directed.

S&F 100 mm long stainless steel door stopper fancy type etc all as specified and directed.

S&F stainless steel door silencer fancy type etc all as specified and directed.

S&F 250 mm long stainless steel aldrops (round nuckle) 12mm dia sliding door bolts completed all as specified and directed.

M&L cutting grooves in brick wall, 75 mm wide and 65mm deep and shaping horizontal face of grooves with cement mortar 1:3 complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) manholes cover (factory made) etc complete all as specified and directed.

M&L for cast Iron grating cover 300x300mm heavy duty etc complete all as specified and directed.

S&F in repair 15mm bore gun metal, globe or gate valve with iron wheel head, screwed both ends from iron pipe & fixed etc complete all as specified and directed.

S&F in repair stainless steel (304 grade) tower rack (fancy type) with 03 Nos hooks etc complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for including taking out existing roof treatment complete all as specified.

M&L for providing cement concrete type B-I (1:2:4) as in roof padding/kerbs or mud stops, rounded or chemfered angles and throating on edge including WPC as per manufacturers instructions with finished roof surface without using extra cement complete all as specified and directed.

M&L for preparation of newely plastered surface of walls and applying two coats of cement base paint over a coat of alkali resitant primer etc complete all as specified and directed.

Taking down carefully existing unserviceable copper/ aluminium point wiring of any description & in any position with and including PVC/steel conduit all fitting, accessories S & Fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings call bell, lamp holders etc and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed. Note: Old fittings/fixtures/accessories like switch, sockets, lamp holders, regulators light fittings etc found in serviceable condition shall be removed carefully for reuse in the work and shall be paid for separately under appropriate item of Schedule `A’. ’.

Taking down carefully Ceiling fan from existing place and removing to MES store yard Scraping, cleaning & painting with two coats of super enamelled paints (as approved by GE) greasing/oiling and refixing at site complete including electric connection with three core flexible wire 1.5 sqmm complete all as specified and directed.

Dismantling and taking out MCB DBs any type, any make at any location and dismantling of MCBs carefully and kept in safe custody with MES store yard for re-use and making good to disturbed surface of wall, etc to match with existing surface complete all as specified and directed.

Disconnecting & taking up or down u/s submain wiring of aluminium/copper conductor with two run/four run of single core earth cable of any description, any size & in any position including taking out existing conduits of any description and making good the disturbed surface to existing surfaces complete all as specified and directed. Note:- Two run/ four run of single core PVC cable with one run of earth conductor shall be measured as one unit)

Taking down carefully Exhaust fan from existing place and removing to MES store yard Scraping, cleaning & painting with two coats of super enamelled paints (as approved by GE) greasing/oiling and refixing at site complete including electric connection with three core flexible wire 1.5 sqmm complete all as specified and directed.

Taking down carefully from existing position the water heater (Geyser's) of any capacity, any size and disconnecting all electric connection including hot & cold PVC water connection and refixing the same including connecting electric & water connection with suitable after the civil work complete all as specified and directed.

Disconnecting the existing electric meter and deposite in MES store yard complete all as specified and directed.

Material and labour for point wiring for one light /fan/Exhaust fan point controlled by one switch with using 1.5 sqmm size (Nominal area) 1100 Volt grade FRLSH PVC insulated and unsheathed multistranded copper conductor cable in and including concealed medium grade rigid PVC conduit (ISI marked) not less than 20 mm dia including PVC insulated and unsheathed copper conductor 1100 volt grade FRLSH PVC insulated and unsheathed cable of green colour as earth continuity wire connected to common box steel modular switch board of required size of thickness 1.0 mm factory made and modular plates of required modules complete with all accessories and including cutting od chasses in walls/floors complete for laying of conduits and making good by plastering with cement mortar 1:6 all as directed. Note :-(I) The portion of point wiring at ceiling shall be in surface PVC conduit/ casing & capping of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'.

All as per item No 2.63 here-in-before but point wiring for 5 pin switch socket outlet combination, 5/6 Amps on independent board complete all as specified and directed..

All as per item No 2.63 here-in-before but Point wiring for 5 pin socket, 5/6 Amps on same board complete all as specified and directed.

All as per item No. 2.63 here-in-before but for One bell / buzzer point controlled by one push button on the same board with other switches or independent complete all as specified and directed.

All as per item No. 2.63 here-in-before but for one light point controlled by two numbers two way switch.

M&L for Point wiring for 15/16 Amps switch socket complete with 2.5 sqmm size (Nominal area) 1100 Volt grade FRLSH PVC insulated and unsheathed multistranded copper conductor cable in and including concealed medium grade rigid PVC conduit (ISI marked) not less than 20 mm dia including PVC insulated and unsheathed copper conductor 1100 volt grade FRLSH PVC insulated and unsheathed cable of green colour as earth continuity wire connected to common box steel modular switch board of required size of thickness 1.0 mm factory made and modular plates of required modules complete with all accessories and including cutting od chasses in walls/floors complete for laying of conduits and making good by plastering with cement mortar 1:6 all as specified and directed. NOTE :-(I) The portion of point wiring at ceiling shall be in surface PVC conduit/ casing & capping of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'.

M&L for Modular switch, one way 6 Amps 240 volts, 1 module ISI marked white ivory finish complete all as specified and directed.

M&L for Modular switch, two way 6 Amps 240 volts, 1 module ISI marked white ivory finish complete all as specified and directed.

M&L for Modular switch, one way 16 Amps 240 volts, 1 module ISI marked white ivory finish complete all as specified and directed.

M&L for Modular socket 6A/16A, 6 pin combined 2 module, 240 volts, ISI marked white ivory finish complete all as specified and directed.

M&L for Modular socket 6A, 5 pin combined 2 module, 240 volts, ISI marked white ivory finish complete all as specified and directed.

S&F ceiling rose, surface bakelite 65 mm X 50 mm AC, 230 V polycarbonate isolated body, two or three terminals complete all as specified and directed.

Refixing Only retrieved ceiling rose surface Bakelite two to three terminal, 65 x 50 mm complete all as specified and directed. by Engineer-in-Charge

S&F lamp holder PVC/Polycarbonate type with cord grip cap/back plate suitable for batten/angle /pendent fitting complete all as specified and directed.

M&L for modular bell push 6 Amp 1 module, 240 volts, complete all as specified and directed.

M&L for bell ding dong, AC 230 V single pole, complete all as specified and directed.

Supply and fixing step type Modular electronic fan regulator single phase, 230 volt, 100/120 watt complete all as specified and directed.

Supply and fixing wall/surface mounted type LED light fitting batten type complete with LED lamp of 1x 20/22 watt (4 ft), extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable suitable size. etc complete all as specified and directed.

Supply and fixing LED light fitting batten type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fixing of sheet metal enclosure Double door for DB’s 8 way 240 Volts with 200 Amps rated bus bar for single phase and neutral supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires all as directed.

Supply and fixing factory made epoxy powder coated distribution board TP & N 4 ways (VTPN MCCB DB) with metal door (IP-43-IK 09 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar neutral bar, standard DIN rail. earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one TPN-MCCB 100/125 Amps as incomer and 12 SP MCBs (or any combination of SP/TP MCBs) outgoing complete all as specified and directed. Note ;- MCCBs SP/SPN/Isolators and MCCB 125 Amps (incomer) will be measured and paid separately under relevant items.

Refixing Only retrieved MCB complete all as specified and directed by Engineer-in-Charge.

S&F for MCB SP 6 to 32 Amps ('C' Series) having current rating 10 kA, 240 V complete all as specified and as directed.

S&F for MCB SPN 40 to 63 Amps ('C' Series) having current rating 10 kA, 240 V complete all as specified and as directed.

Supplying & fixing MCCB, 3 pole, 125 Amps, 50Hz, 415 Volts with rupturing capacity 16 KA with thermal magnetic release and adjustable overload setting having type DPX 160 fixed in distribution board, complete all as specified & directed.

M&L for surface/concealed submain wiring as required with two single core FRLSH PVC insulated and unsheathed copper stranded conductor of size 6 Sqmm 1100 Volts and one run of copper stranded conductor of size 6 Sqmm for continuous earthing drawn in and including rigid non metallic PVC conduit pipe ISI marked of size not less than 20 mm dia including to connect their incoming/outgoing electric connections by using required sizes of lugs/thimbles as well as flexible conduit of suitable sizes shall also be used at any open surfaces of conductor complete all as specified and directed. Note :- (i) two single core cable and one run of earth copper conductor including conduit will be measured and paid as one unit length. (ii).The quoted rate shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc of any description for conceling the conduits to required depth and making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface.

M&L for surface/concealed submain wiring as required with two single core FRLSH PVC insulated and unsheathed copper stranded conductor of size 10 Sqmm 1100 Volts and one run of copper stranded conductor of size 10 Sqmm for continuous earthing drawn in and including rigid non metallic PVC conduit pipe ISI marked of size not less than 25 mm dia including to connect their incoming/outgoing electric connections by using required sizes of lugs/thimbles as well as flexible conduit of suitable sizes shall also be used at any open surfaces of conductor complete all as specified and directed. Note :- (i) two single core cable and one run of earth copper conductor including conduit will be measured and paid as one unit length. (ii).The quoted rate shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc of any description for conceling the conduits to required depth and making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface.

S&F for LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all specified & directed by Engineer –in-charge.

S&F for new sheet metal enclosure made of 2mm thick plain sheet with approximate size 600x600x150mm dully welded / bolted with MS angle iron 20x20x4mm (all around) and flushed in wall and making good the disturbed surface with brick masonry in CM 1;4/PCC 1;2;4 type B0 (12.5 mm graded stone agg) complete with plastering in CM 1:6 complete for protection fo electric meter/MCB DBs/ main switches etc. The MS enclosure shall be provided from opening hinged door with locking arrangement. The sheet metal enclosure shall be fabricated in the pattern and designed as approved by GE. The sheet metal enclosure shall be painted with two coat of synthetic enamel paint over a coat of red oxide primer after preparation of steel surfaces complete all as specified and directed.

Supply, fixing and commissioning (maximum energy efficient type) water heater storage type 25 litres capacity, vertical, steel body including grouting of studs in wall in cement mortar (1:3) nuts, washers and provision of two numbers PVC connection 600mm long with brass nuts and two number brass chromium plated angular valve suitable for 15mm bore pipe for water supply connection complete all as specified and directed.

Supply and fix exhaust fan, plastic body AC single phase 230 V of size 300mm sweep heavy duty with blade, frame and louvers all complete all as specified and directed.

Material and Labour for single pole and neutral enclosure with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB of rating 20 Amps, 240 Volts complete fixed on wall by provisioning of suitable size of MS strip, nuts, bolt and washer including taking down existing two pin and earth plug and socket complete all as specified and as directed.

M&L for Earthing complete with galvanised steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in the ground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below ground level connected to galvanized iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, GI tubing 20 mm bore light grade protection pipe, GI watering pipe 20mm bore medium grade with funnel and wire mesh, charcoal, magnesium, salt etc & 50mm thick pre-cast RCC (1:2:4) type B-1 (Nominal mix) cover with reinforced with 8 mm dia TMT bar @100 mm centre to centre both ways with mild steel handle 12 mm dia, plastering 12 mm thick in cement mortar (1:6) internally and upto 150 mm below ground level externally with suitable steel handle and angle iron 40X40X6mm frame and chamber of PCC (1:3:6) type C-1 (including earth work in any type of soil, removal of surplus soil to a distance n.exc.50m) and connecting, testing on completion, all as shown on electric plate No. 03 of SSR-2009 Part-I, including taking down of existing earthing complete all as directed. Notes: 1. Earth lead & protection pipes length upto & including 7.50 metre. 2. Earth filling shall be done by vegetable soil. 3. Soil should be free from stone, boulders, aggregate, gravels etc.

S&F for RCCB of 2 pole 40 Amp rating with sensitivity of 30 mA suitable for 240 Volts complete all as specified and directed .

M/S Rajeev Construction

M/S LAKSHYA CONSTRUCTIONS

JEE JEE BUILDERS