ADDITION/ALTERATION OF FALSE CEILING AND ALLIED WORKS IN BUILDING NO T-169,PROVN OF CEILING FANS, WALL MOUNTED FANS AND EXHAUST FANS IN BUILDING NO T-68, T-79, T-90 AND T-92 AND EDN SECTION, PROVISION OF FLAME PROOF LIGHTS AND EXHAUST FANS IN STN ARM

Amount

Taking down cement plaster on brick walls, etc, including raking out joints, hacking for key, scrubbing down with water etc & prepare surface to receive new plaster complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:6 on brick work or concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new surfaces and applying 2 coats of oil bound distemper over a coat of primer complete all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillet complete all as specified and directed.

S&F 12mm thick gypsum plaster board conforming to IS-2095 1982 to fix as suspended ceiling with one step and including GI frame consisting perimeter channel 20X27X30X0.5 mm intermediate channel 45 (WEB) X 1.5 (flange) X 0.90mm @ 1.22 M C/C with ceiling angle 25 X10X0.5 mm fixed to soffit with GI cleat and steel expansion fastner, ceiling section 51.5 (Knurled Web X 26 (flange) with lips of 10.5 mm X0.5mm @ 610mm C/C nec clip, screw, nylon sleeves etc complete and apply two coats of oil bound distemper over a coat of putty on ceiling board complete all as specified and directed.

M&L for point wiring including concealed/fixed on surface of structure/truss etc rigid non-metalic PVC conduit pipe medium grade, ISI marked heavy duty in size 20mm dia with 1.5 Sqmm FRLS confirming to IS 694 insulated unsheathed, multistranded copper conductor cable Single core 1100 volt grade with flush cast iron/pressed steel/PVC modular terminal boxes (as per site) of suitable size for fixing of modular accessories such as switches, sockets and fan regulators etc including modular cover plate in required modules and colour and including FRLS insulated & unsheathed 1100 volts grade cable with multi stranded copper conductor of size 1.5 Sqmm as continuous earth wire complete including making good the disturbed surfaces for the following:- Note :- (i) Quoted rate shall be included cost of modular terminal box cheasesing, cutting, plastering, colouring etc to surface of wall / beam / roof etc matching with existing surface including required modular blank plate to be cover/fill up the extra blank gap/space of modular cover plate/mounting board in required module /make/model etc. (ii) Modular cover plate shall be meausered and paid separately against respective items of the BOQ.

One light point controlled by one way independent switch complete all as specified and directed.

Supply and fixing modular switch, one way 6 Amps 1 module complete all as specified and directed. Note:- The colour of modular accessories shall be approved by this office before placing the order.

S&F modular fan regulator step type 120W 2 module complete all as specified and directed.

S&F white cover plate with frame 3 module complete all as specified and directed.

S&F new ceiling fan in size 1200mm sweep white colour BEE 5 star rated copper wound energy saving with set of sweep/ extension rod / "U" clamp and other accessories single phase 50 Hzs Min air delivery 210 CFM with service value 6.00 BEE including making electric connection using three core copper cable drawn through in PVC flexible conduit pipe complete all as specified and directed. Make: Usha model EX 3, 1200mm (white colour) / Crompton Greaves / Havells / Khaitan / Bajaj / Orient. Note : Quoted rated shall be included the cost of GI clamp made out strip of size 32x6 mm with nut bolts washer etc all.

S&F Wall Mounting fan/ air circulators heavy duty 450mm sweep non capacitor bracket mounted type copper wound motor ISI marked BEE 4 star rated energy saving with fixing accessories complete making necessary electric connection complete all as specified and directed.

S&F Exhaust fan 300mm sweep steel body heavy duty with louver mounting bracket ISI marked BEE 4 star rated energy saving less noise capacitor type incl making hole in brick wall plastering colour coading and all site required work for disturbed surface matching with existing and making electric connection using three core copper cable drawn through in PVC conduit pipe complete all as specified and directed.

M&L for point wiring with single core FRLS-PVC insulated unsheathed 1100 volt grade cable with multi stranded copper conductor of size 1.5 sqmm (Nominal area) drawn through and including stove enamelled steel conduit medium grade ISI marked not less than 20 mm dia concealed in wall with cutting chasing and making good the disturbed surface of wall with all fittings including tee, junction boxes and continuous earth wire with and including FRLS PVC insulated unsheathed 1100 volts grade cable with multi stranded copper conductor of size 1.5 sqmm (Nominal area) connected to earth dolly complete for one light point control by one switch complete all as specified and as directed.

M&L for point wiring with single core FRLS-PVC insulated unsheathed 1100 volt grade cable with multi stranded copper conductor of size 2.5 sqmm (Nominal area) drawn through and including stove enamelled steel conduit medium grade ISI marked not less than 20 mm dia concealed in wall with cutting chasing and making good the disturbed surface of wall with all fittings including tee, junction boxes and continuous earth wire with and including FRLS PVC insulated unsheathed 1100 volts grade cable with multi stranded copper conductor of size 2.5 sqmm (Nominal area) connected to earth dolly complete for one light point control by one switch complete all as specified and as directed.

S&F switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.

S&F flame proof switch socket & plug combined in LM6 cable termination box in LM6 250 V, 16A, 2P+Earth complete all as specified and directed.

S&F LED light fitting 2x16 watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

S&F sheet metal enclosure for MCB distribution board SPN, double door, 8 way with 200 Amp rated bus bar 230 Volts including taking down old unserviceable DBs in any make/ model/ way etc with accessories complete all as specified and directed.

S&F MCB SPN 2 pole 220 volts 40 Amps 'C' Curve 10 KA complete all as specified and directed.

S&F MCB single pole 215 volts 32 Amps 'C' Curve 10 KA complete all as specified and directed.

M&L sub main wiring with three runs of single core PVC FRLS IS-694 cable with unsheathed multi-stranded copper conductor of size 6 sqmm and drawing through in concelead rigid metallic steel conduit pipe heavy duty in suitable size with all necessary fittings including one run of FRLS insulated unsheathed stranded copper conductor cable of size 6 sqmm as earth wire (green in colour) and connected to common earth dolly complete including taking down of old unserviceable sub main wiring complete all as specified and as directed. Note: (i) Three run of 6 sqmm with one run of steel conduit pipe shall be measured as one unit. (ii) Cost of cutting, cheasesing, plastering, colouring and matching to disturbed surface all as per existing etc shall be included in quoted rates under this item.

S&F Flame proof exhaust fan 300mm sweep steel body heavy duty with louver mounting bracket ISI marked BEE 4 star rated energy saving less noise capacitor type including making hole in brick wall plastering colour coading and all site required work for disturbed surface matching with existing and making electric connection using three core copper cable drawn through in PVC conduit pipe complete all as specified and directed.

Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri

RK ENTERPRISES

HIMANSHU TRADERS