SPECIAL REPAIR TO ROAD IN FRONT OF P-15 PROVOST UNIT, FOL GROUP SUPPLY COY ASC AND IN FRONT OF EMB HQ OF AGE B/R (CENTRAL) UNDER GE(W) COLABA MUMBAI.

Amount

Repair to potholes any depth, not exceeding 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc., cutting around edges to at least 30 mm in depth, making good by applying tack coat with cationic bitumen emulsion RS-1 grade at the rate of 5 kg per 10 sqm, putting in bituminous macadam thickness consolidated/ compacted thickness using hot mix plant and mechanical paver with 4% binder (paving grade bitumen VG-30 grade) content by weight of total mix, rolled and compacted with power roller 8 to 10 tonnes to required camber and gradient complete all as specified and as directed. Note :- (i) Bituminous macadam shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper. (ii) The exact bitumen content required shall be determined as per IRC 27: 2009. The adjustment in rate due to variation in quantity of bitumen if any shall be priced at the rate of Rs 30 per kg.

M & L for bituminous macadam not exceeding 75 mm thick (compacted thickness) using hot mix plant and mechanical paver with 4% binder (paving bitumen VG-30 grade) content by weight of total mix, rolled and compacted with power roller 8 to 10 tonnes to required camber and gradient complete all as specified and directed. Note :- (i) Bituminous macadam shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper. (ii) The exact bitumen content required shall be determined as per IRC 27: 2009. The adjustment in rate due to variation in quantity of bitumen if any shall be priced at the rate of Rs 30 per kg.

Preparing existing black top surface with wire brush for removing caked mud etc., sweeping with broom and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a primimng/ tack coat withbituminous primer (Paving Bitumen) @ 5 kg/10 sqmt of surface compelete all as specified

M & L for bituminious premix dense asphaltic concrete 40 mm (compacted thickness) using graded crushed stone aggregate premixed with binder (paving grade bitumen VG 30 grade) @ 6% by weight of total mix & hydraulic lime filler, rolled and compacted to required camber and gradient complete all as specified and directed. Note :- (i) Bituminous premix dense bituminous concrete shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper. (ii) The exact bitumen content required shall be determined following the Marshall Mix Design procedure contained in the Asphalt Institute Manual MS-2 (Sixth Edition) as referred in case 3.5.3 of IRC 111: 2009. The adjustment in rate due to variation in quantity of bitumen if any shall be priced at the rate of Rs 30 per kg.

Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi-automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T & P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete all as specified and directed.

Providing and fixing in repairs Glow studs (cat's eye) of size 80 to 100 mm X 80 to 100 mm X 15 to 20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge The cats eye shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 +/-5 degrees to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. Make : Gogia plastic, Dark eye or equivalent as approved.

S & F in repairs road convex mirrors outdoor type made of one piece polycarbonate plastic of size 80 cms dia, outdoor type, mounted on steel frame including all fixing arrangements and necessary foundations (300mm X 300mm X 450 mm with M15 using 20mm graded stone aggregate) complete all as specified and as directed.

S & F in repairs LED powered solar road studs of size not less than 110 mm X 110 mm X 25 mm ( with shank height not less than 50mm) made of weather resistance aluminium alloy and poly carbonate material electronically welded micro- prismatic lens with abrasion resistant coating. Protection shall conform to IP65 in accordance with IS: 12063-1987 Category 2 for protection against water ingress. Mono-Crystalline Solar Panel 2.4 V / 0.3 Watt. One Ni-Mh or NI-cd Rechargeable Battery (1.2V / 1600 MA). The cats eye shall support a load of approx 10 TON weight. The slope of retro- reflective surface shall be 35 ± 5 degress to base. The reflective panels on both sides with at least 12 cm of reflective area up each side. The stud shall provide a viewing distance of not less than 800m. The studs shall be flushed onto the to the Road surface and fixed using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge.Make Roadstar or equivalent as approved.

S & F in repairs metal tubular delineator 900 mm long X 50 mm dia MS pipe (medium grade) powder coated with top cover with jali 400 mm long from top and pasted with twin colour reflective tape strips embedded 200 mm below ground level including excavation and PCC M15 (Nominal Mix) with using 20 mm graded stone aggregate in foundation of size 200 mm X 200 mm X 200 mm and making good surface complete as per direction of Engineer-in-charge. Make : Roadstar or equivalent as approved.

Demolition brickwork or stone/boulder mansory,build in cement morter including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L for brick work with sub class "B" bricks,straight or curved on plan, exc 6 mtr mean radius with old size bricks,built in cement mortar (1:4) complete all as specified and as directed by Engr-in-Charge

All as per item No.11 above but by using bricks obtained from item No.10 above

M&L for PCC 1:2:4 type B1 (using 20mm graded agg) as in coping/benching including use and waste of formwork for fair finished surfaces complete all as specified and directed.

Demolition of cement cencrete in ground floor n.exc 15mm thickness (below or above ground level ) and removing the demolished materials and debris to out side MD land

M&L for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specifeid and directed.

M and L for 15mm thick rendering in cement mortar 1:4 on bricks work/ concrete surface and finishing even and smooth without using extra cement complete all as specified and directed.

M and L machine pressed precast concrete interlocking paver block, glossy finish any shape and sixze confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment including 40mm thick sand coushioning layer complete all as directed and specified. Make : Ultra Tiles, Nitco, Mehtab Tiles, Pavit, Shino.

Demolition of reinforced cement concrete of any description (reinforcement cut as required to facilitate demolition) and in any position, above or below ground floors, not otherwise specifically provided for and removing the same outside MD land complete all as specified and as directed

S&F mild steel framed work such as grills, gratings, drain covers etc conforming to Fe. 290, Gde E-165 complete all as specifeid and directed.

M&L for preparation of steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specifeid and directed. Make : (a) LUXOL (Berger paint) (b) BROLAC (Johnson & Nicholson) (c) SUPERLAC (Shalimar Paints) (d) NEROLAC (Goodlass Nerolac) (e) APCOLITE (Asian Paints)

M&L for PCC (1:2:4) Type B-2 using 20mm graded stone aggregate as in hard standing 100mm thick broom finished all as specified and directed.

M&L forming 12mm thick expansition joints filled with performed bituminous filler and top 30mm primed and sealed with sealing compound grade. A thickness of concrete slab 100mm complete all as specified and directed.

RS Enterprises

Vandan Enterprises

M/s Reena Constructions