Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹39.0 LAccepted-AOC 1017 SMALL FLAT DHANAS U T CHANDIGARH | ₹39.0 L | L-1 | Accepted-AOC Allotment |
| 2 | L-2₹40.6 LRejected-Finance CHANDIGARH | ₹40.6 L | L-2 | Rejected-Finance due to higher |
| 3 | L-3₹41.2 LRejected-Finance 11 NO 870 SECTOR 13 A CHANDIGARH | ₹41.2 L | L-3 | Rejected-Finance due to higher |
| 4 | L-4₹41.6 LRejected-Finance CHANDIGARH | ₹41.6 L | L-4 | Rejected-Finance due to higher |
| 5 | L-5₹44.0 LRejected-Finance | ₹44.0 L | L-5 | Rejected-Finance due to higher |
Tender Value
₹53.5 L
EMD Value
₹1.1 L
Closing Date
1 Apr 2026, 11:00 amClosed
Executive Engineer, C.P. Division No.4, Chandigarh
Executive Engineer, C.P. Division No.4, Chandigarh
Renovation of H. No.1010, 1010/1, 1010/2, 1011, 1011/1, 1011/2 GMCH Type-V, Sector-39, Chandigarh
2026_CHD_91425_1
CP4/2026/2678452
Open Tender
Civil Works
90 days
Renovation of H. No.1010, 1010/1, 1010/2, 1011, 10
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹1.1 L
8 Apr 2026
23 Mar 2026
1 Apr 2026
23 Mar 2026
1 Apr 2026
23 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat (As per DSR 13.82.1) | |||||
| 2Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work (As per DSR 13.99.1) | |||||
| 3Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 11.41A.1 Double charge vitrified tile polished finish of size Size of Tile 600x600 mm (As per DSR 11.41A.1.1) | |||||
| 4Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm (As per DSR 11.41A.3.1) | |||||
| 515 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) (As per DSR 13.2.2) | |||||
| 6Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (As per DSR 13.46.1) | |||||
| 7Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (As per DSR 13.80) | |||||
| 86 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) (As per DSR 13.16.1) | |||||
| 9Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. 8.2.2 Granite stone slab of colour black, Cherry/Ruby red Area of slab upto 0.50 sqm (As per DSR 8.2.2.1) | |||||
| 10Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossedon the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. (As per DSR 9.83) | |||||
stage.html
html • 0.05 MB
technical_111801.pdf
techsummary_111801.pdf
finance_111801.pdf
BOQ Comparative Chart
xlsx
finsummary_111801.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 12.03 MB
BOQ_111801.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid