PROVN OF GUARD ROOM ALONGWITH TOILET FACILITIES AT OTM GATE BAIRAGARH UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Surface dressing n.exc 15 cm deep in hard/dense soil complete all as specified and directed.

Excavation of earth work by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes, pier holes, etc. but not exceeding 10 Sqm on plan and getting out in hard/dense of soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and exceeding 1.5 m but n. exc 3.00 m depth for foundations etc. or for shafts, well cess pits, manholes, pier holes, etc. but not exceeding 10 Sqm on plan and getting out in hard/dense of soil complete all as specified and directed.

Supplying and filling approved earth (from outside MD Land) including spreading, levelling in layers n. exc 25 cm, watering and well ramming complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removal of excavated material from site to a distance exc 250 m but n. exc 500 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed.

Removal of excavated material from site to a distance exc 1.5 km but n. exc 5 km and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed.

M&L for hardcore of broken stone of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation, sub base, mass concrete etc complete all as specified and directed.

Use & waste for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough flat surfaces complete all as specified and directed.

Use & waste for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough flat surfaces complete all as specified and directed.

Use & waste for formwork to sides and soffits offloor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc. for rough flat surfaces complete all as specified and directed.

M&L for Design mix M-25 as in foundations including raft footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for Design mix M-25 as in coloumns etc. complete all as specified and directed.

M&L for Design mix M-25 as in lintel beam, roof beam etc. complete all as specified and directed.

M&L for Design mix M-25 as in Roof Slab, Grade slab, Plinth protection etc supported on roof beam, column etc. complete all as specified and directed.

M&L for Design mix M-25 as in chajja and similar work complete all as specified and directed.

S&F of mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F of mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirups complete all as specified and directed.

M&L for brick work with fly ash modular bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brickwork with fly ash bricks built in CM 1:4, straight or curved on plan to any radius in half brick thick walls complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 using water proofing compound as per manufacturer instructions on any face of brick or concrete surfaces (External surfaces), finished even and smooth without using any extra cement complete all as specified and directed. Note: WPC shall be measured and paid seperately under respective item.

M&L for 15 mm thick rendering in CM 1:4 on any face of brick or concrete surfaces, finished even and smooth without using any extra cement complete all as specified and directed.

Supply only Integral water proofing compound mixed with cement mortar complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on any face of brick or concrete surface, finished fair & even without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:3 on brick or concrete ceiling surfaces, finished fair and even without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 : 2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm complete all as specified and directed.

M&L for applying a coat of 1 mm thick white wall putty on walls, finished even and smooth complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall primer complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular) joint free, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors; over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular) joint free, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in skirting; over and including 10 mm thick rendering in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed.

M&L for coloured glazed ceramic tiles in walls/ vertical surface of size 300 x 450 & 6 to 7 mm thick over and including 10 mm thick rendering in CM 1:4 for backing of tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.

M&L for 16-18 mm thick granite stone slab (any type) (table rubbed and polished) as in steps, jambs, pillars, window & door cills, cooking platforms, counter, shelves and like in cement mortar (1:4) over and including 15mm thick screed bed in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for rounding to exposed edges of stone slab (one edge) as in steps, cooking platform and other similar situation complete all as specified and directed.

M&L for taking down existing treatment and providing of water proofing roof treatment to non accessible/ accesible roof with APP modified membrane with non woven polyster reinforced of wt not less than 3 Kg/Sqm and thickness not less than 3 mm uniformely embedded during manufacturing process complete comprising of following activities:-

(a) Applying 10 mm thick plaster in CM 1:4 mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab. After the plaster is cured the roof will be tested for water tightening by ponding with water for 72 Hrs for any seepage / leakages etc. and if any seepage is oberved the rectification will be carried out by pressure grouting under the pressure of 5 Kg/Sqcm using cement based cement grout. After the surface is repaired the slab will again be tested for water tightness against before processing further treatments.

(b) The surface of the roof, parapet and gutters, drain mouths etc. over which water proofing treatment is to be applied shall be cleaned of all foreign matters such as fungus, mass, dust etc. by wire brushing and dusting. For cast iron drain outlets the groove shall be cut around to tuck in the treatment as pipes, chimney stacs etc. and other similar situations to ease up about corners.

(c) All joints & changes in direction should be curved with cement morar 1:3 mixed with SBR latex @ 200 ml per bag of cement and cured well before laying the membrane.

(d) Fillet of PCC (1:2:4) type B-0 of 100 x 100 mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of direction. The membrane should not be taken over at any steep turns and hence all corners /junctions should be rounded.

(e) Applying hot blown bitumen VG-10 as primer conforming to IS : 3384-1965 @ 0.30 Kg/Sqm on prepared surface till the surface is properly impregnated.

(f) Applying APP modified water proofing membrene as specified shall be laid by torch application method laid on hot bitumen 85/25 grade (bonding material) at the rate of 1.2 kg/sqm as per manufacturers instructions. The overlaps while torching shall be 100 mm in both directions (longititudinal and transverse directions). All overlap joints shall be sealed throughly by thermofusing both the membrene layers and sealing it with the help of hot trowel. The overlap joints shall be made as monolithic layer.

(g) Applying two coats of heat-reflective bitumen-compatibe aluminum paint over existing APP membrane surface incl cleaning of surface etc. complete all as per manufacturer instructions.

S&F for solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as per manufacturer instructions complete all as specified and directed.

S&F of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as shown in SSR-2004 Part - II complete all as specified and directed.

S&F of 105 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. made out of 1.25mm thick MS sheet complete all as specified and directed.

S&F of 125 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. made out of 1.25mm thick MS sheet complete all as specified and directed.

M&L for providing cement concrete, 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in coping, bed blocks, lintels, cills, steps, seismic and other similer bands, kerbs and like etc complete all as specified and directed.

M&L for 35 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides and both face shall be covered with decorative face 0.9 mm thick mica with teak wood lipping/frame to match complete all as specified and directed

M&L for 30mm thick 2nd class hard wood glazed and skelton shutter open rebeted and prepared to receive glass gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securiing glass fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8 complete all as specified and directed.

S&F of powder coated aluminium fabricated work as in shutters/frames for doors, windows/ vents, partition as per manufacturer instructions including necessary jointing cleats, anodised aluminium snap beading, neoprane rubber beading with and including taking out damage portion of aluminium doors, windows or complete door/ window complete all as specified and directed. Note: Rates are including for necessary new fittings for door/window i.e handle, tower bolt, butt hinges, filling of gap between wall by silicon gel etc.

S&F of powder coated aluminium fabricated window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.75 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws etc. complete all as specified and directed.

M&L for mild steel framed work as in grills, gratings, gate etc with ends of bars souldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed.

S&F of 100 mm long mild steel butt hinges medium weight, cold rolled and fixed with screws complete all as specified and directed

S&F of 150 mm long aluminium handles, cast type, anodised and fixed with screws complete all as specified and directed

S&F of 150 mm long aluminium anodised barrel tower bolts, extruded section and fixed with screws complete all as specified and directed.

S&F of 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples to uPVC door with beading complete all as specified and directed.

S&F of 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 sqm in each pane complete all as specified and directed.

S&F of 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.50 sqm in pane complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L of preparation of new or previously untreated wooden surface of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F of 15 mm bore GI tubing medium grade with all necessary fittings and fixing to wall and ceiling or laid in floors complete all as specified and directed.

S&F of 20 mm bore GI tubing medium grade with all necessary fittings and fixing to wall and ceiling or laid in floors complete all as specified and directed.

S&F of 25 mm bore GI tubing medium grade with all necessary fittings and fixing to wall and ceiling or laid in floors complete all as specified and directed.

S&F of vitreous china WC squatting pan "Orissa Pattern" of size 580 x 440mm white with integral foot rests with and including provn of cement concrete bedding and 'P' or 'S' trap as required including connection to trap and to flush pipe, anti syphonage pipe, etc. complete all as specified and directed.

S&F of vitreous china wash down water closet pan (Pedestal Pattern), white, pedestal pan and 'P' or 'S' trap, plastic water closet seat,white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F of PVC low level flushing cistern of 10 ltrs capacity with all internal fittings including 32 mm dia flush pipe fixed to supply pipe, PVC connection 600 mm long 15 mm bore with brass heads & washers complete all as specified and directed.

S&F of vitreous china bowl urinal, flat back of size 465 x 355 x 265 mm white (minimum) with CP grating and union for discharge pipe and PVC waste pipe (excluding flushing cistern) complete all as specified and directed.

S&F of CP health faucets with 1.2 mtr long CP flexible pipe and fixed to 15 mm bore pipe complete all as specified and directed.

S&F of 32 mm bore PVC waste pipe for kitchen sink /WHB of one mtr length complete all as specified and directed.

S&F of 100 mm dia CP grating (Minium weight 25gms) complete all as specified and directed.

S&F of PVC connection 15 mm bore of PTMT nuts of length 600 mm complete all as specified and directed.

S&F of 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F of 15 mm bore long body bib taps, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.

S&F of 15 mm bore stop/angle valves, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.

S&F of 15 mm bore stop valves, cast copper alloy, chromium plated, fancy type (Concealed type) with long shank and cup and capstan head, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F of brass chromium plated shower rose 125 mm size with or without swivel joints, with shower arms any size including fixing to steel pipe or union of 15 mm bore complete all as specified and directed.

S&F of brass chromium plated tubular towel rail, 20 mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F of rotational moulded polyethylene water storage tanks, 3 layers (cylindrical vertical with closed top) of capacity 500 litres, hoisted including all fittings as required and 20 mm dia PTMT float valve (Min wt 20mm-210gms) and fixed in position complete all as specified and directed.

S&F of Gun-metal gate valves of size 20 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints and fixed in walls / laid in trenches/floors and jointed in solvent cement complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) bends any radious and jointed in solvent cement complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) junction single, (SingleT) equal or unequal and jointed in solvent cement complete all as specified and directed.

&F of 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints and fixed in walls / laid in trenches/floors and jointed in solvent cement complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) bends any radious and jointed in solvent cement complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) junction single, (SingleT) equal or unequal and jointed in solvent cement complete all as specified and directed.

M&L of 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate as in sub base of floor complete all as specified and directed.

M&L for sand cushioning with clean dry sand for laying of interlocking paver block complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block reflective type (glossy finish) any shape and size of 60 mm thick, M-35 Grade with grey cement and pigments complete all as specified and directed.

S&F of 200 mm bore/ dia (DWCPE Pipe) class SN-8 structural wall polyetylene (Pipe with online coupler and elastomeric rubber ring) with hollow annular smooth outer surface and a smooth inner surface (double wall plain) for non pressure underground drainage and sewage application Type B Nomial size (Dn/ ID) made of polyethylene (PE) material confirming to ISI 6098 (Part II : 2013) and to be transported handled installed and jointed as per Annex A of ISI 6098 (Part II :2013) complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred /stopped ends etc. complete all as specified and directed.

M&L for 15 mm thick ready mix plaster on brick or concrete surface finishing the surfaces even and smooth without using extra cement complete all as specified and directed. (Make: Ultratech Readyplast, JSW Enduraplast, Hiscon Industries

S&F of factory made precast cement concrete cover of size 900 x 900 x 70 mm of M-20 duly reinforced with 8 mm dia MS bar @ 100 mm c/c both way and MS hook both side complete all as specified and directed. Note: Quoted rate is inclusive of reinforcement and hook.

M&L for LLDPE septic tank for 10 Users designed to carry sewage and sludge water (not less than 1300 ltrs capacity) with and including necessary excavation in any type of soil, PCC 1:4:8 as in sub base, vent shaft and making connection etc. complete all as specified and directed.

M&L for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:4, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC, filled with brick bats of size 1.20 M dia X 3.00 M deep complete all as TD Drawing no. CEBZ/TD/78/2011 and as directed.

Excavation in post holes (or similar holes) each n. exc 0.5 cum and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in hard / dense soil complete all as specified and directed.

M&L for mild steel work as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only chain link fencing including line wires, any mesh size and type to any standards, rails straining bolts etc. incl provn of binding complete all as specified and directed. wire.

Fixing of chain link fencing of any mesh size and type to any standards, rails straining bolts etccomplete all as specified and directed.

S&F of mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other to be fitted with washers and one hexagonal or square nuts, dia of neck 5 to 10 mm and length exc 5 cm and n. exc 10 cmcomplete all as specified and directed.

S&F of mild steel round bars 10mm dia and over as in strengthening bars, bending, cranking spirally for hooking for chain link, hooking end and welding with flats of chain link fencing Fe 410W (Gde E-25) quality -A or FE-290 (Gde E-165) complete all as specified and directed.

S&F of mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc; complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for point wiring for one light/ fan/ bell point with 1.50 sqmm (nominal area) FRLS PVC insulated, unsheathed, multi-stranded copper conductor cable, 1100 volts grade, controlled by one one-way switch, drawn in & including non metallic rigid PVC conduit, concealed (ISI marked) medium grade not less than 20 mm diameter with all conduit accessories in concealed wiring system by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 (except on concrete surface casing capping will be used in lieu of concealed PVC conduit) including one run of 1.5 sqmm copper conductor as earth continuity wire connected to common earth dolly, metal flush box for mounting modular fittings like switches, sockets, fan regulators etc. with white modular sheet frame and cover complete all as specified and directed.

All as per item No 108.00 above but for 3 pin 5 Amp socket outlet on independent board.

All as per item No 108.00 Above but for one 3 pin 5 Amp socket outlet on same board.

All as per item No 108.00 above but for 3 pin 15 Amps socket outlet on independent board and electric wiring with 2.5 sq mm cable.

S&F of modular switch flush button single pole one way 5 Amp 240 volt complete all as specified and directed.

S&F of modular socket outlet multipurpose having provision for 2/3 pin, 5/6 Amp, flush type, 240 volt complete all as specified and directed.

S&F of modular switch socket combination outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, flush type, 240 volt complete all as specified and directed.

S&F of ceiling rose surface bakelite, three terminals, 240 Volts, 50 Hz complete all as specified and directed.

S&F of lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F of LED tube light fitting, surface mounted lumanaires, 1 x 18 W, 240 V, decorative ultra slim round / square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack with bipin holders, LED lamps, connector block, etc. with all accessories internally pre-wired and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, 220 V AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

S&F of ceiling fan regulator, electronic step type, 240 V, AC 50 Hz, single pole, 100 watts flush type complete all as specified and directed.

S&F of 300 mm sweep exhaust fan, rust proof steel body, 240 Volts AC, single phase with blades, frame and louvers complete all as specified and directed.

S&F of 1200 mm sweep ceiling fan complete with blades, down rods and accessories, 230 volts, Min air delivery 210 CFM with service value, 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F of sheet metal enclosure for SPN DB (single pole and neutral) single door type, surface mounted, concealed in wall, 8 ways, 240 Volts, IP 43, ISI marked with 200 Amps rated bus bar, dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed. Note:- MCB shall be measured and paid separately.

S&F of MCB, SP, 240 volts, 10 KA breaking capacity, 'C' curve of capacity 6 to 32 Amps including making connection with suitable size aluminium / copper lugs complete all as specified and directed.

S&F of MCB, SPN, 240 volts, 10 KA breaking capacity, 'C' curve, of capacity 32 Amps including making connection with suitable size aluminium / copper lugs complete all as specified and directed.

S&F of building security light fitting, 30 Watts, frequency 50 Hz, water proof, 120 lumen/ watt, made up of pressure die cast aluminium housing with high efficient LED as lighting source and pc over having top opening separate driver compartment with IP-66 protection and impact resistance of IK07 including suitable galvanized iron pipe light grade brackets 1 mtr length bent to shape to obtain required shape including clamps, nuts, bolts, washers etc; and connecting with suitable copper wire of size 23/0.0076 complete all as specified and directed.

M & L for earthing complete with galvanised steel plate earth electrode 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of size 32x6 mm galvanised mild steel wire by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm duly reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 40 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata including testing complete all as specified and directed.

S&F of post top lantern LED type, 20 watt, 230 volts AC, outdoor type with decorative post top for 360 degree indirect light, IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 16 sqmm, 2 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc. complete all as specified and directed.

M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. [Note:-Compacted/punned thickness shall be measured & paid]

Supply and laying reinforced precast concrete cable cover, ISI Marked- 5820, Class LV, Type I, flat of size 250 mm x 150mm x 40mm complete all as specified and directed.

Supply & laying/ fixing of 40 mm bore GI tubing light grade with all fittings as required for passing through cables under floors, along the wall or along the pole, etc; with suitable size M.S.flat iron clamps incl nuts, bolts and washers complete all as specified and directed.

S&F in position Rotational moulded polyethylene water storage tanks, 3 layers (cylindrical vertical with closed top) of capacity 500 litres hoisted and fixed in positioncomplete all as specified and directed.

S&F of Gun-metal gate valves of size 20 mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F of Gun-metal gate valves of size 25 mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M/s VIKAS TRADERS (BID ID -3419479)

ROYAL CONSTRUCTION (BID ID -3408552)