REWIRING AND REPLACEMENT OF INTERNAL WIRING OF CERTAIN BLDGS ELECTRICAL FITTINGS AND FIXTURES CEILING FAN EXHAUST FAN DISTRIBUTION BOX SUBMAIN WIRING AND BLGD SECURITY LIGHT OF ZONE B AT JASAI MIL STN UNDER GE ARMY BARMER

Amount

Taking down unserviceable copper/aluminium point wiring (light, fan, socket or power) etc complete and making good disturbed surfaces of walls, floors etc complete all as specified and directed. (Note : Taking down unserviceable fittings such as switches, socket, ceiling rose,pendents etc shall be measured and paid separately)

Taking down unserviceable main switches, DBs, bus bars chambers including all fittings and fixtures such as MCBs,isolator, etc complete all as specified and directed.

Taking down existing unserviceable sub main wirings with PVC conduits / PVC casing-caping including cutting chases for conduits and making good disturbed surfaces complete all as specified and directed .

All as per Item No 3 above but without taking down steel /PVC conduits.

M&L point wiring with 1.5 Sqmm (nominal area) FRLS cable 1100 Volts grade, PVC insulated, multistranded, single core unsheathed, copper conductor cables drawn through and including Concealed in PVC Conduits with all accessories complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including 1.6 mm thick mild steel sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light/fan/bell point controlled by one ,one way switches complete all as specified and directed .

All as per item No. 5 above but One light point controlled by 2- way switches, with cables 1.5 sqmm size. Complete all as specified and directed .

All as per item No. 5 above but one 5 Amps 3/5 pin socket outlet on the same board with other switches.

All as per item No.5 above but one 5 Amps 3/5 pin socket outlet on independent board.

All as per item No. 5 above but wiring with 2.5 sqmm copper cables with 2.5 Sqmm copper cable as continuous earth wire for one 5/15 Amps switch socket outlet on independent board.

M&L point wiring with 1.5 Sqmm (nominal area), FRLS cable 1100 Volts grade, PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including PVC Surface Boxes of suitable module with top cover sheet fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one ,one way switches as specified and directed. complete all as specified and directed .

All as per item No 10 above but one 5 Amps 3/5 pin socket outlet on the same board with other switch.

All as per item No 10 above but one 5 Amps 3/5 pin socket outlet on independent board.

All as per item No. 10 above but wiring with 2.5 sqmm copper cables with 2.5 Sqmm copper cable as continuous earth wire for one 5/15 Amps switch socket outlet on independent board.

All as per item No 10 above but wiring in existing conduit / casing caping for one light/fan/bell point controlled by one , one way switch 5 Amps .

All as per item No 10 above but wiring in existing conduit / casing caping for one 5 Amps 3/5 pin socket outlet on the same board with other switch.

All as per item No 10 above but wiring in existing conduit / casing caping for one 5 Amps 3/5 pin socket outlet on independent board.

All as per item No. 10 above but wiring in existing conduit / casing caping with 2.5 sqmm copper cables with 2.5 Sqmm copper cable as continuous earth wire for one 5/15 Amps switch socket outlet on independent board.

M&L point wiring with 1.5 Sqmm (nominal area),FRLS cable 1100 Volts grade, PVC insulated, multistranded, single core unsheathed, copper conductor cables drawn through and including Concealed in PVC Conduits / Casing Caping with all accessories complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including 1.6 mm thick mild steel sunken boxes /Modular box of suitable size for mounting of switches, sockets, regulators etc complete for one light/bell point /ceiling fan/ exhaust fan controlled by one ,one way switches as specified and directed.complete all as specified and directed .

All as per item No. 18 above but one 5 Amps 3/5 pin socket outlet on independent board.

All as per item No. 18 above but one 5 Amps 3/5 pin socket outlet on the same board with other switches.

All as per item No. 18 above but wiring with 2.5 sqmm copper cable with 2.5 Sqmm copper cable as continuous earth wire for one 5/6 pin /16 Amps socket out let on independent board.

S&F in replacement switch piano, flush button, 5/6 Amps single pole, one way, 230 Volts complete all as specified and directed .

S&F in replacement Switch piano, flush button, 5/6 Amps, single pole, two way, 230 Volts, complete all as specified and directed .

S&F in replacement socket outlet, 3/5 pin, 5 Amps, flush type complete all as specified and directed .

S&F in replacement switch socket outlet, 3/5 pin, 5 Amps, flush type complete all as specified and directed .

S&F in replacement Switch socket outlet multi-purpose 3pin, 15 Amp and 3 pin, 5 Amps controlled by one switch complete all as specified and directed .

M&L in replacement Ceiling rose complete all as specified and directed .

S & F in replacement Bell push, flush type,5 Amp complete all as specified and directed .

S&F in replacement Modular switch 1 way 5/6A, 1 module complete all as specified and directed .

S&F in replacement Modular switch 1 way 15/16A, 1 module complete all as specified and directed .

S&F in replacement Socket, 5/6A - 2/3 pin combined 2 module, complete all as specified and directed .

S&F in replacement Socket 5/6A & 15/16A - 2/3 pin combined 2 module complete all as specified and directed .

S&F in replacement modular type fan regulator 120 Watts , 2 module , complete all as specified and directed .

S&F in replacement modular type bell push switch , 1 module , complete all as specified and directed .

S & F in replacement of White cover plate with frame for mounting of switch socket, 2 module complete all as specified and directed.

All as item No 35 above but 3 module

All as item No 35 above but 6 module

All as item No 35 above but 8 module

S & F in replacement Buzzer ,Ding Dong AC,230 volts,single pole old complete all as specified and directed .

S & F in replacement stepped type electronic fan regulator flush type 220 Volts, Single Module all as specified and directed .

S & F in replacement stepped type electronic fan regulator flush type 220 Volts, Two Module all as specified and directed .

M & L in replacement decorative integrated LED 10 watt bulk head luminaire comprises of acrylic diffuser & frame etc. with accessories complete all as specified and directed

S&F in replacement LED light fitting 20W with batten ( integrated driver), 04 feet, 3000K or 5700K colour temp, decorative type with all accessories internally pre wired and connection up with twin core copper conductor cable with suitable size taking down old fitting complete all as specified and as directed. Make : Crompton/Havells/Wipro

S&F in replacement LED Post Top Light 25W Aluminium Die Cast WWH 3000K Colour Temperature IP 65 with all accessories internally pre wired and connection up with twin core copper conductor cable with suitable size complete all as specified and as directed. Make : Crompton/Havells/Wipro

Supply and fix in replacement LED Tube Rod ( integrated Driver),3000K or 5700K colour temp, 4 feet long of 18/20 watt in existing tube light fitting complete all as specified and directed. Make - Crompton/ Havells/ Wipro

Supply and fix in replacement recess mounting low glare LED panel light 36 watt 3000K or 5700K for Armstrong/grid ceiling or similar ceiling mounting system with concealed complete prewired using 1.5 Sqmm FRLS PVC insulated (Unsheathed) 3 core copper conductor cable, 1100V grade complete all as specified and directed. Make: Crompton/Havells/Wipro.

S & F in replacement Lamp holder insulated body with black plate suitable for batten fitting complete all as specified and directed . Make - Crompton/ Havells/ Wipro/Bajaj.

M & L in replacement for 5 watt LED Downlight Surface mounted / Recess mounted 3000K or 5700K colour temp flat down light / edge light , complete with all attachment all as specified and directed by Engineer in charge of Make - Crompton/ Havells/ Wipro.

M & L in replacement for 7 watt LED Downlight Surface mounted / Recess mounted 3000K or 5700K colour temp slim down light edge light, complete with all attachment all as specified and directed by Engineer in charge of Make - Crompton/ Havells/ Wipro.

S & F in replacement flexible LED strip/rope (05 meter each) 3000K colour temp warm white light with driver. Make: Havells/ Crompton/Wipro.

S & F in replacement LED 25 Watt street light fitting with IP-66, Dust and water resistant, secondary lenses etc. for bldg security complete with light grade GI brackets, Nuts, bolts complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size and length for wall mounting as specified and directed by Engineer in charge Make - Crompton/ Havells/ Wipro

S&F in replacement PVC Switch board Surface mounted type of size 4 x 4 way complete all as specified and directed .

S&F in replacement PVC Switch board Surface mounted type of size 4 x 6 way complete all as specified and directed .

S&F in replacement PVC Switch board Surface mounted type of size 8 x 10 way complete all as specified and directed .

S & F in replacement hylum sheet 3mm thick top cover suitable for size 4 x 4 way PVC boxes complete all as specified and directed .

S & F in replacement hylum sheet 3mm thick top cover suitable for size 4 x 6 way PVC boxes complete all as specified and directed .

S & F in replacement hylum sheet 3mm thick top cover suitable for size 8 x 10 way PVC boxes complete all as specified and directed .

M&L Sub main wiring with 6 sqmm (Nominal area)FRLS cable 1100 Volts grade, with two runs of single core cable PVC insulated, multistranded, unsheathed, copper conductor cables 1100 Volts grade drawn through PVC casing-caping of suitable size, fixed to wall/ceiling etc including 6 sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor as earth wire and duly connected to common earth point complete all as specified and directed . (Note :- Two runs cables and one run of earth wire incl PVC casing caping will be measured as one length.)

All as per item No 58 above but with 4 sqmm cables and 4 Sqmm earth continuity conductor. complete all as specified and directed .

All as per item No 58 above but 6 Sqmm drawn through existing serviceable conduits/PVC casing capping .

All as per item No 58 above but 6 Sqmm drawn through PVC concealed conduits.

All as per item No 58 above but 4 Sqmm drawn through PVC concealed conduits.

S&F in replacement factory made board distribution double door in sheet steel enclosure without bus bar SPN, 2 way, 240 Volts suitable for fixing MCBs.complete all as specified and directed ..

S&F in replacement Factory made board double door distribution in sheet steel enclosure with 200 Amps rated bus bar SPN, 4 way 240 Volts suitable for fixing MCBs.complete all as specified and directed ..

All as per item No. 64 above but SPN, 8 way, 240 Volts.complete all as specified and directed .

All as per item No. 64 above but TPN, 4 way, 415 Volts. complete all as specified and directed .

M&L for taking out old unserviceable MCCB TP/TPN / 04 Pole from existing LT panel board and supply and fix MCCB 4 Pole 100 amps capacity, 25 KA at 415 volt 50 Hz AC supply including necessary modification in panel board if required to fix the MCCB complete with replacement of incoming and out going cable connection with lugs, aluminium conductor cable of proper size, nuts bolts all directed. Replacement of brunt lugs and wire/cable pieces etc as required at site. Make : Indoasian /C&S /Legrand

S&F MCB, SP 'C' Curve, 240 Volts, 5 to 32 Amps.complete all as specified and directed . Make : Indoasian /C&S /Legrand

S&F MCB, SPN 'C' Curve, 240 Volts, 16 Amps.complete all as specified and directed . Make : Indoasian /C&S /Legrand

S&F MCB, SPN 'C' Curve, 240 Volts, 32 Amps.complete all as specified and directed . Make : Indoasian /C&S /Legrand

S&F MCB, SPN 'C' Curve, 240 Volts, 40 Amps.complete all as specified and directed . Make : Indoasian /C&S /Legrand

S&F MCB, SPN 'C' Curve, 240 Volts, 20 Amps.complete all as specified and directed . Make : Indoasian /C&S /Legrand

S&F MCB, SPN 'C' Curve, 240 Volts, 25 Amps.complete all as specified and directed . Make : Indoasian /C&S /Legrand

S&F MCB TPN 'C' Curve 63 Amps. 415 Volts complete all as specified and directed Make : Indoasian /C&S /Legrand

S&F Blanking plate for filling gap of MCB.complete all as specified and directed . Make : Indoasian /C&S /Legrand

Supply and fixing in replacement single pole neutral enclosure with two pin and earth plug and socket modular type complete with one single pole MCB 20 Amps Make: Havells/ Indoasian /C&S /Legrand

Taking down ceiling fan/Wall Mounting Fan , any size and sweep from its position and transport to workshop for servicing, dismantling for servicing including removal of bearing,bushes,condenser, connector, flexible cord, split pin etc if required removing old grease and refill fresh, lubricating bushes along with new washers, cleaning and washing fan blades, fan body etc with soap solution after repairing, re- assemble the same and transporting from workshop to any location in Jasai and fixing to position / location directed, connecting to electric system, testing etc complete all as specified and directed . Note : -(i) Replacement of parts/rewinding shall be measured and paid separately (ii) Quoted rate is deemed to be inclusive of transporting fan from any location in Army Area to MES store & taking down unserviceable/ defective parts. (iii) Item such as bearings, gun metal bushes, capacitor, shaft etc required for replacement shall be measured and paid separately as supply only.

All as per item No 77 above but for Exhaust fan of any size and make.

M&L for Spray painting of ceiling fan, fan blades, down rod, canopy etc with a coat of Ist quality synthetic enamel paint of approved colour and quality including preparation of old painted surfaces, cleaning etc and printing the fan numbers etc with black paint complete all as specified and directed.

M&L for replacement of fan blades (set of three) of any make / type of ceiling fan of size 1200mm sweep complete all as specified and directed.

Supply only fan blades (set of three) of any make / type of ceiling fan of size 1400 mm sweep complete all as specified and directed .

Supply only U clamp complete with nut bolt washer, split pin and rubber weal etc complete all as specified and directed by engineer in charge.

M&L for Cutting and taking out old burnout winding of any sweep ceiling fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete all as specified and directed .

M&L Cutting and taking out old burnout winding of 230/250 mm sweep exhaust fan / wall fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete all as specified and directed .

All as per item No 84 above but for 300 mm sweep

All as per item No 84 above but for 380/450 mm sweep

M&L Spray painting of exhaust fan of any size and make with a coat of Ist quality synthetic enamel paint of approved colour and quality including preparation of old painted surfaces, cleaning etc and printing the fan numbers etc with black paint complete all as specified and directed.

Supply only ball bearing suitable for ceiling fan / exhaust fan of any sweep complete all as specified and directed .

Supply only gun metal bush suitable for ceiling fan of any sweep complete all as specified and directed .

Supply only gun metal bush suitable for exhaust fan of any sweep complete all as specified and directed .

Supply only capacitor 2.5 MFD suitable for ceiling fan of any sweep complete all as specified and directed.

Supply only capacitor 4 MFD suitable for exhaust fan / wall mounting fan of any sweep complete all as specified and directed.

Supply only for replacement metallic bottom plate of ceiling fan of any sweep complete all as specified and directed.

S&F 250 mm sweep Exhaust fan (plastic body) minimum three star rating with accessories complete all as specified and as directed .

S&F 300 mm sweep Exhaust fan metallic body minimum three star rating with accessories complete all as specified and as directed .

Dismantling and taking down carefully the existing unserviceable geysers of any storage capacity, any make, any model fixed in any position by disconnecting from electric connection and water inlet, out let connection and vent pipes etc from site (inside or outside bldgs) and transporting the same to MES E/M Office Jassai Store Yard for carrying out repair work such as over hauling / brazing welding etc and painting with one coat white colour synthetic enamel paint and re-fixing in same position including making good disturbed surface after complete repair work and reconnection of inlet, outlet pipe and vent pipe including testing complete all as specified and directed. Note : - (i) Replacement of parts shall be measured and paid separately (ii) Quoted rate is deemed to be inclusive of replacement of 4 Nos foundation bolts,nuts,washers of suitable size.

S&F in replacement of thermostat switch 240 volts AC suitable for geysers of any make/model and capacity (ISI Marked) complete all as specified and directed.

S & F in replacement of heating element of 1500 watt for geysers including nuts, bolts, gasket etc complete all as specified and directed.

S & F in replacement of bottom cover of 25 ltrs capacity geyser of any make / model duly painted to match with the existing surface complete all as specified and directed.

S & F in replacement of copper tank of 25 ltrs capacity geyser ISI marked manufactured out of cold rolled pressure electro type copper sheet of appropriate thickness double tapped brazing / welded internally copper tinned and hydraulically tested including nuts, bolts, washers, etc complete all as specified and directed.

S& F in replacement of brass chromium plated flexible connection pipe (length not less than 30 cm and not exceeding 50cm ) with coupling nuts with washers suitable for 15 mm bore pipe complete all as specified and directed.

S & F in replacement of PVC (heavy duty) flexible pipe connection of 15 mm bore 450 mm long with two Nos brass coupling suitable for cold water complete all as specified and directed.

S&F in replacement of cable PVC round insulated / sheathed copper cable of size 03 core 70/.0076.

S&F in replacement 3 pin plug top of capacity 15 Amp AC 240 Volts 50 Hz.complete all as specified and directed .

S&F in replacement sheet metal enclosures comprising two pin and earth plug socket, MCB SP 20 Amps (C-curve-10 KA) complete all as specified and directed.

S&F in replacement of 15mm bore brass non return valve (ISI Marked) vertical / Horizontal type and fixed to GI pipe fittings complete all as specified and directed.

Supply and fix Ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including connecting to electric point system, testing etc complete all as specified and directed. Make: Crompton/Havells/Usha complete all as specified and directed.

S&F in replacement of GI tubing 15mm bore medium grade (ISI Marked) with all GI fitting and fixed complete to walls and ceiling or laid in floor for inlet and outlet water connection to existing O/H tank complete all as specified and directed.

S&F in replacement of GI tubing 20mm bore medium grade (ISI Marked) with all GI fitting and fixed complete to walls and ceiling or laid in floor for inlet and outlet water connection to existing O/H tank complete all as specified and directed.

S&F in replacement of Gun metal gate valve with iron wheel head, screwed both ends for iron pipe of size 15mm bore complete all as specified and directed.

Supplying and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium conductor cable solid stranded, served with inner sheathing of PVC tape and overall PVC sheathed in service connection twin core cable flat or circular in section of cross sectional area 6 Sqmm 2 core

All as per item No. 111.00 all as above but size 10 Sqmm 2 core.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundation, laying of cable etc.n exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25cm thick in any type of soil complete all as specified and directed .

Removal of excavated soil to a distance 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed .

Supply and filling dry clean sand (tibba sand) in trenches for cushioning of underground cable and punning for cushioning to cable complete all as specified and directed . Note :- Punned thickness shall be measured for the purpose of payment.

M&L 40 to 50mm thick rough dressed Jodhpur type stone slab cover 25 to 30 cm wide and not less than 60 cm in length, laid dry abutting each other with gap between adjacent slab not exceeding 10 mm over under ground cable protection complete all as specified and directed.

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 Sqmm 2 core including taking out old unserviceable cable complete all as specified and directed.

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core including taking out old unserviceable cable complete all as specified and directed.

S&F LED Bulb B22 type 9 watt 3000K Warm White. Make: Wipro/ Havells/ Crompton.

S&F Emergency Inverter LED Tubelight (Batten Type) 18/20 watt , backup time minimum 3 hrs. Make: Wipro/ Havells/ Crompton.

S& F in repairs to any type of outdoor bldg light into Lithium base energy efficient integrated solar light 12 watt encases solar PV panel 25/30W monocrystallinn, Lithium battery 111/12.8V,15.4 AH with in built BMS, high brightness W-LED (140-160 lm/ watt) lamp, CRI 80, colour temperature 6500K, micro controller based charge controller cum driver with automatic dimming function, dusk to down operation, LUX output 15-18( from 5-6mtr height) , working temperature (-) 10° c to (+) 55°c, weight 6-7 kg with adjustable MS clamp and bracket suitable for wall mounting protection from short circuit, overload , reverse polarity and battery protections complete all as specified and directed. Make : Axxon/Crompton/Havells

Taking down existing earthing and M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all directed by Engineer-in-charge. NOTE :(i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-( ii) Item includes the cost of GI pipe up to 7.5m for protection of earth wire.(iii) Item includes cost of lead wire up to 7.5 m

M/s Shiv Builder and Suppliers

M/S PRASHANT BENIWAL

M/S Tanisha Traders

M/s Malinath Electricals