8350 ADDN ALTN TO LT PANEL AND LT CABLE FOR PROVISION OF BACKUP POWER SUPPLY TO SECURITY EQUIPMENT AND PERIMETER LIGHTING AT INS ANGRE SPECIAL REPAIRS OF OLD CABLE AND ASSOCIATED JUNCTION BOXEDS BREAKERS CONVENTIONAL LIGHT AND EARTHING AT COMNETCEN M

Amount

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, fan regulators, ceiling roses, lamp holders, brackets, ,removing material to store for keeping in safe custody and making good to disturbed surfaces as directed.

M&L for point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm size, 1100 volts (ISI marked), FRLS grade drawn through & including non metalic rigid, PVC non metallic Conduit, ISI marked, not less than 25mm dia with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 1.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including PVC modular box with cover plate complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza (c) Switch socket measured & paid separately.

(i) One light point controlled by one 5A switch

(ii) One Fan point controlled by one 5A switch

(iii) One 5A flush type switch socket point on same board board

(iv)One 5A flush type switch socket point on independent board

(v) One Bell point controlled by one bell push

M&L for point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 2.5 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including PVC modular box with cover plate for One 5 pin, 15A switch socket combination on the independent board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red/Blue/Yellow (ii) Neutral - Black (iii) Earth - green (b) Switch socket measured & paid separately.(iv) Make of wire : Polycabl/Plaza/Havells/Gloster (v) Caping casing make : Asian/madi/Precision/National

M&L for point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 4.0sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including PVC modular box with cover plate complete comprising of 03 Nos 6A sockets and 01 No 15A socket on board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red/Blue/Yellow (ii) Neutral - Black (iii) Earth - green (b) Switch socket measured & paid separately. (c) Make of wire : Polycabl/Plaza/Havells/Gloster (d) Caping casing make : Asian/madi/Precision/National

S & F Ceiling rose, PVC/polycarbonate insulated body type, 3 terminal, 240 volts, 5 Amps all as specified and directed. Make: Anchor/Roma/Legrand/Glodmodal.

S & F modular switch 1 way 6A, 1 module all as specified and directed. Make: Anchor/Roma/Legrand/Glodmodal.

S & F modular switch 1 way 16A,1 module all as specified and directed. Make: Anchor/Roma/Legrand/Glodmodal.

S & F modular socket, 6A - 2/3 pin combined 2 modules all as specified and directed. Make: Anchor/Roma/Legrand/Glodmodal.

S & F modular socket 6/16A,2/3 pin, combined 2 module all as specified and directed. Make: Anchor/Roma/Legrand/Glodmodal.

S&F for modular fan step regulator, 120W - 2 modular all as specified and directed. Make: Anchor/Roma/Legrand/Glodmodal.

S & F bell, DINGDONG, 240 volts, SP complete all as directed.

S & F moduler Bell push, 5/6 Amps, 240 volts complete all as directed. Make: Anchor/Roma/Legrand/Glodmodal.

S &F in repair Ultra slim edge lit type recess mounting LED 2X2 Luminaire 36 watt and extruded aluminium housing with anti-glare diffuser provides high quality ecomonic energy saving lighting LED Luminaire suitable for 600 x 600 mm modular/ POP/ Gypsum ceiling complete all as specified and as directed. Make: Crompton cat No LCPL-36-CDL(2X2) / C&S cat No LTCRSLM36WATT2X2 or equivalent Cat part in Surya / Philips / Bajaj

S & F in repirs LED light fitting 20W, 230 V, 4 feet surface monted, indoor decorative aluminium extruded T- 5 LED batten, integrated type etc., complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed. Make- C & S cat part No. LTTB4F20WLED/W (Nakshatra series) or equivalent cat part in Crompton/ Havells /Philips / Bajaj

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting VTPN 8 way, 440 volts with copper bus bar rating 250 Amps for each phase with 2 neutral bar, dust and vermin proof suitable for incorporation of MCB’s etc complete all as directed. Make - Legrand cat part no 5077 47 or equivalent in Siemens /Schinder/ C&S NOTE FOR ITEM No. 15 to 18 : [i] MCB DBs shall be concealed in wall wherever posible including making good the surface to match with surrounding. [ii] The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting VTPN 6 way, 440 volts with copper bus bar rating 250 Amps for each phase with 2 neutral bar, dust and vermin proof suitable for incorporation of MCB’s etc complete all as directed. Make - Legrand cat part no 5077 46or equivalent in Siemens /Schinder/ C&S

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting VTPN 4 way, 440 volts with copper bus bar rating 250 Amps for each phase with 2 neutral bar, dust and vermin proof with provision for DPX³ 160 MCCB as incomer and suitable for incorporation of SP/TP MCB's as outgoingetc complete all as directed. Make - Legrand cat part no 5077 45 or equivalent in Siemens /Schinder/ C&S

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make -Legrand Cat Part No. 5076 41 or equivalent in Siemens /Schinder/ C&S

S & F modular power socket 25A, 2 module, 25A plug top, 25A mini MCB 'C' series 3KA including 4 module box with cover plate complete all as specified and directed. Make: Anchor/ Roma/ Crabtree SAP code : ACNKCXW253, DCTNCSPA025, ACAGXXW253, ACVPPCWV03, ACTXPIWX03 respectively

S & F in replacement of MCB 6 to 32 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed. Make -Legrand Cat Part No. 4085 87-95 or equivalent in Siemens / Havells / C&S

All as per Srl item No. 20 here in before but MCB SPN 63 Amps Make -Legrand Cat Part No. 4086 20 or equivalent in Siemens / Havells / C&S

S & F MCCB, 415 volts, four pole of cap 100 Amps, 25 KA, ICS = 100% ICU, with fixed Thermal - Magnetic setting including spreader terminal/ thimble of suitable size and making connections complete all as directed. Make - Legrand Cat Part No. 4200 15 or equivalent in Siemens/ Havells / C&S

S & F MCCB, 415 volts, four pole of cap 63 Amps, 25 KA, ICS = 100% ICU, with fixed Thermal - Magnetic setting including spreader terminal/ thimble of suitable size and making connections complete all as directed. Make - Legrand Cat Part No. 4200 13 or equivalent in Siemens/ Schinder/ C&S

M & L in repair Submain wiring with two run 4 Sqmm single core multistranded PVC insulated & unsheathed copper conductors 1100 volts FRLS grade ISI make drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc including one run PVC insulated & unsheathed multistranded copper conductor 4Sq. mm FRLS grade ISI make as earth continuity conductor connected to common earth as earth dolly /mains, with all accessories like PVC elbow, PVC tee, etc including making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex/plaza/Gloster (c) Caping casing make : Asian/madi/Precision/National

M & L in repair Submain wiring with two run 6 Sqmm single core multistranded PVC insulated & unsheathed copper conductors 1100 volts FRLS grade ISI make drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc including one run PVC insulated & unsheathed multistranded copper conductor 6Sq. mm FRLS grade ISI make as earth continuity conductor connected to common earth as earth dolly /mains, with all accessories like PVC elbow, PVC tee, etc including making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex/plaza/Gloster (c) Caping casing make : Asian/madi/Precision/National

M&L for earthing with maintenance free environment friendly earth electrode set comprising of 17.2mm dia, 3m long rod of low carbon steel molecular copper bonded for a thickness of 250micron, highly conductive ANS/ NSF STD-60 certified carbon bonded backfill compound which shall set like concrete according to BS 7430 & IEEE 80 (each bag shall contain 50 lbs) complete connected to main DB, LT panel DG set etc including PCC earth pit chamber in PCC 1:3:6, 50mm thick chamber cover in PCC 1:2:4 and with 6mm dia mild steel reinforcement @ 100mm c/c both ways, excavation and earthwork in any type of soil/rock by drilling the hole 4" dia bore at the desired location and the depth of bore hole shall be approximately 18" less than the electrode rod in the centre of the bore hole and drive it for about 12" the bottom 12" can be filled with fresh soil. After this adopt the procedure as per manufacturers instructions to pour and fill the compound complete all as directed.

M&L for earth continuity conductor or main earthing lead fixed to walls on batten or recess or chases or buried in ground or drawn in conduit / pipe fixed to poles or any other indicated situation for loop earthing including nuts bolts etc as required, with 20x 3mm copper earth strip complete all as specified and directed.

M & L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to DBs or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire all as specified and directed.

Supply, fabrication, installation, testing & commissioning of LT Panel board / Feeder piller box, indoor type, dust and vermin proof, made out of 2mm thick CRCA sheet, front openable doors having aluminium bus bar of capacity 1000 amps for phases and 500 amps for neutral including powder coated painting, internal wiring with suitable size of stranded copper conductor cable, PCC foundation, supporting channels,cable termination,cable gland etc complete all as directed and suitable to accommodate the following switch gears and meters :- a) MCCB 630 Amps 4 pole ,65KA,Thermal magnetic- 01 (Incomer) b) MCCB, 3 pole 250 Amps,37KA,Thermal magnetic- 04 Nos (Out going) c) MCCB, 3 pole 150 Amps,26KA,Thermal magnetic - 02 Nos (Out going) d) MCCB, 3 pole 125 Amps,10KA,Thermal magnetic - 03 Nos (Out going) e) Digital type Volt meter , digital type ,0 - 500V - 1 Nos f) Digital type Ammeter, digital type with CT's - 1 No g) indication lamps (R,Y,B) LED type - 1 set MAKE of MCCB : Schinder/C&S/ Havells/Legrand

S & F in repairs ACB Manual drawout type ,microprocess release 800Amps 4pole, 50 KA with necessary fabrication/modification of panel/bus bar including bolts, nuts washers etc., suitable copper wire connection along with lugs spreader terminal of suitable size and making connections complete all as directed all as directed. Make - Legrand Cat Part No. 0287 31 or equivalent in Siemens/ Havells / C&S cat No AHA08N4PMDMP3 (S)

S & F in repairs MCCB, 415 volts, four pole of cap 630 Amps (DPX³ 630), 70 KA, ICS = 100% ICU, with fixed Thermal - Magnetic setting including spreader terminal/ thimble of suitable sizewith necessary fabrication/modification of panel/bus bar including bolts, nuts washers etc., suitable copper wire connection along with lugs spreader terminal of suitable size and making connections complete all as directed all as directed. Make - Legrand Cat Part No. 4220 37 or equivalent in siemens/GE

All as per Srl item No. 31 here in before but MCCB 250Amps (DPX³ 250), 3 pole, 415V, 36KA Make - Legrand Cat Part No. 4202 39 or equivalent in siemens/Schinder

All as per Srl item No. 31 here in before but MCCB 125Amps (DPX³ 160), 3 pole, 415V, 10KA Make - Legrand Cat Part No. 4200 06 or equivalent in siemens/Schinder

All as per Srl item No. 31 here in before but MCCB 100Amps (DPX³ 160), 3 pole, 415V, 10KA Make - Legrand Cat Part No. 4200 05 or equivalent in siemens/Schinder

All as per Srl item No. 31 here in before but MCCB 63 Amps (DPX³ 160), 3 pole, 415V, 10KA Make - Legrand Cat Part No. 4200 03 or equivalent in siemens/Schinder

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size70 sq mm 3½ core. laid in duct / along pole/wall etc including making connection complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it. Make : Ploycab/Havells/Gloster

All as per Srl item No. 36 here in before but conductor of size16 sq mm 4 core.

S&F 50 mm bore GI tube light grade laid in trenches or fixed on wall, floor or on pole with MS flat iron camp with bolts, nuts and washer of suitable size for cable protection complete all as specified .

All as per Srl item No. 38 here in before but 100 mm bore pipe

S & F MCCB, 415 volts, four pole of cap 125 Amps, 10 KA, ICS = 100% ICU, with fixed Thermal - Magnetic setting including spreader terminal/ thimble of suitable size and making connections complete all as directed. Make - Legrand Cat Part No. 4200 16 or equivalent in Siemens/ Havells / C&S

S&F MS arms bracket for mounting one in Nos Street/Building security light fitting 40 mm medium grade GI at an angle of 30 degree including clamp/nut/bolts & washers to brace the same properly with duky painted in synthetic enamel paint of two coat in silver colour complete all as specified & directed. NOTE : Contractor deemed to be included the making the good to the disturbed surfaces to match with the existing.

S & F in repirs LED security light 120 Watt (INDUS T SERIES) PDC aluminium housing with sealed toughened glass cover, SMD LED with secondary lens, IP66 protection roadway light complete with all acessories and fixing arrangement al as specified and directed. Make- C&S CAT PART NO-LTESST120WLED/LS or equivalent Cat Part in Philips/ Havells

S & F sub main wiring for circuit of size 04 sq mm 2 core (FRLS) alongwith earth wire of 04 sq mm single core of FRLS PVC insulated unsheathed cable, 1100 volts grade with multistranded copper conductor including PVC conduit of suitable size complete all as specified and directed. Make of wire : Polycab/Havells/Plaza/Gloster

S & F in repirs 150 watt flood light (ORION 3.0 SERIES), PDC aluminium housing with aim & adjustable bracket, Matt finished reflector for glare elimination, SMD LED with secondary lens, IP65 with high power LED s as light source, suitable for high lighting architectural façade highmast and general purpose complete with all acessories and fixing arrangement al as specified and directed. Make- C & S CAT Part No.- LTEF150WHPLED or equivalent Cat Part in Philips/ Havells

Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to galvanised earth wire of size 4mm dia means of bolts, nuts check nut & washers of galvanised iron or steel & connected to main switch including complete excavation and earth work in soft/loose soil and disposal of surplus soil to a distance not exc 50 meters, PCC Chamber (1:3:6) type C-2 precast RCC cover with frame, funnel wire mesh, 20mm bore light grade galvanised iron or steel pipe for water, charcoal or coke and salt in alternative layers of 15cm compacted thickness all round the earth electrode complete alll as shown in electrical plate No 5 of SSR part-I including welding with suitble electrode and testing complete all as directed. Note : 4mm dia GI wire shall be arc welded to GI plate electrode.

S&F galvanised iron strip 25 x 4 mm or main earthing lead fixed to wall with clamps or recess or croses or buried in ground or drawn in conduits/pipe or fixed to poles or any other indicated situation for loop earthing etc as required all as specified and directed.

Excavation in trenches n exc1.5m wide and n exc in depth for laying of cables and getting out in loose/soft soil complete all as specified and directed.

Returing filling in, including spreading, levelling watering and well ramming in layers not exc 25cm complete all as specified and directed.

Removing excavated material n exc 50cm and deposting where directed at a level n exc 1.5m above the starting point compete all as directed.

Material and labour for sand filling in trenches fine dry sand as sand cushioning to cable 8 cm before laying of cables and 15 cm after laying cable which shall be punned down to 10 cm complete all as specified and directed. (Note : Only punned down thickness shall be measured and paid)

Supply and laying reinforceced precast concrete cable cover, class LV type , I, flat size 250mmx150mmx40mm laid across the cable complete all as specified and directed.

M&L cement concrete in 1:2:4 type B1 using 20mm grade stone aggregatefor road cutting/pole couping exposed surfaced and fair and even finishing with out using any extra cement etc complete all as specified and directed

Supply & install water cooler electric driven single phase having approx storage capacity of 120 ltrs and nominal cooling capacity of 80 ltrs per hour using R 134a refrigerant, Steam welded stainless steel tank, Auto cut out, Voltage over load compressor protection including PCC platform and connecting complete all as specified and directed. Make - Blue star SDLx80120B Series or equivalent in LG / Hitachi / Voltas

M&L for sub-main wiring with 2 runs of 2.5 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC casing and caping not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 2.5 sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red/Blue/Yellow (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex/Plaza/Gloster

S&F plug top for 25 A 3 pin with indicator all as specified and directed. Make Crabtree/Roma

S & F modular white cover plate with frame of 3 module all as specified and directed. Make : Anchor/ Roma/ Legrand/Crabtree

S & F modular PVC modular box of 3 module all as specified and directed. Make : Anchor/ Roma/ Legrand/Crabtree

S&F for Rigid non-metallic PVC conduit 20mm dia incl connecting to water cooler drain pipe complete fixing accessories such as complete of all tees, bends,elbows, reducers, mouth tube ends fixing accessories such as GI saddles, full threded screws and (Narayan) nylon rawl plugs etc surfaced on walls/roofs all as specified and as directed

Supply & Fixing Tubes medium grade galvanised 15mm bore pipe including all pipe fittings such as ends, elbows,unions, tees, reducing tees, adoptors, sockets, plugs, hose clips etc. and fixing to walls etc, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and cutting through walls, floors and their making good making good the surface to match with surrounding.

M&L for Cutting the existing steel tubing and connecting the additions line including tee, bend, union,etc all as specified and directed.

Supply & Fixing Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of 15mm bore all as specified.

Supply, install, Test and commissioning wall mounted Split type AC 1.5 TR capacity units indoor/outdoor complete with cordless remote control unit, 220-240 volt, 50Hz, single phase fitted with high quality rotary compressor air ioniser and Plasma filter for better indoor air quality with 5 star rating including inbuilt of voltage stabiliser complete all as specified and as directed. Make: Voltas/Hitachi/Mitsubishi/ Blue star Notes:- (i) Rate of supporting brackets for outdoor units is deemed to be included in rate quoted. (ii) Supply and fixing copper tubings of appropriate dia for suction line and for liquid discharge line duly insulated with suitable insulation material including making hole in wall for passing though pipe and making good distrubed surface also deemed to be included in this item.

All as per Srl item No. 62 here in before but Split type AC 2.0TR capacity

S & F in replacement 20 Amps Single pole and neutral enclosure with a Two Pin and earth plug and socket complete with one single pole MCB and making connections complete all as directed. Make -Legrand Cat Part No. 5078 14 or equivalent in Siemens /GE/ C&S

S & F and clamping jointing copper tubing for suction line and for liquid discharge incl duly insulated with suitable insulation material including making hole in wall for passing through amd making to the disturb surface complete.

S&F for Rigid non-metallic PVC conduit 20mm dia with complete of all tees, bends, elbows, reducers, mouth tube ends fixing accessories such as GI saddles, full threded screws and (Narayan) nylon rawl plugs etc surfaced on walls/roofs all as specified and as directed

S & F Search Light fittings 2000 watts weather proof chromium plated brass body,wheel house arrangement for both vertical and horizontal direction made out of brass sheet complete with heat resistant with hot air escape arrangement with 2000 watt halogen on security watch tower along with reflector for search light. Make : Ajmera cat no 2573 & 2573R or equivalent as approved by GE

S&F LED 4x1, 36W fitting , environmental friendly, new generation, aesthtically desingned, ultra modern recess mounting luminaire with high brightness SMD LED Suitable for POP/Gypsum ceiling including suspension of 1.5 mtr is includedd complete all as specified and directed. Make : Havells PLUTONEO4x1PLR36WLED840S/Wipro/Philips

shubham construction

Shree Ayyappa Engineering

DHARMESH ENTERPRISES