Redevelopment of Janam Divas Park in Sector-23 A, Ward No.-2, Zone-II, Gurugram

Amount

NS Item

(i) 6 No. Ornamental Design FRP Molded Pillar FRP base pedestal with vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 20mm drilled in the base with hold fasts and having B class vertical m.s pipe of size 88 mm and height 2890mm, the central m.s pipe holds FRP Molded taj 6no of size 260 x 260 x 210mm high suitably mounted at appropriate height complete as per design. Complete pillar suitably grinded and subsequently spray painted with two coats of P.U Paints in required shade. (ii) 12 No. spndred and 6 no. Friezes Floral and Ornate decorative design combination of spandrel and frieze, matched to be suspended between two m.s pillars as per the design. The spandrel (L-Bracket) having length 420mm and height 400mm the frieze (Top Panel) height 250mm and length as per the size of the gazebo. The frieze mounted on m.s tabular pipe frame of size 50mm x 25mm, frieze properly welded to the column pillars at either ends. Complete set of spandrel & frieze uniformly grinded spray primered, spray painted with P.U Paints. (iii ) 3 No. cast iron/frp base panel railing with frame Floral and Ornate decorative design cast iron/frp side railing panel as per design having height of 730mm and length as per size of Gazebo. Each panel top and bottom mounted with mild steel tubular pipe frame of size 50 x 25 mm. The bottom mild steel pipe having 2 nos. of hold fasts in m.s pipe of size 40 x 40mm and length 250mm welded at the base to hold the panel in the ground. Every panel length is as per the gap between the two pillars. The complete railing panel grinded for neat surface finishes spray primered and subsequently spray painted with P.U Paint in required shade. (iv) One set of top frame with Double Finishing FRP Molded Plastic Sheet roof Top frame in m.s tubular pipe of size 40 x 40mm properly welded and grinded. The top frame mounted with FRP molded Sheet of 4 mm thick with top & bottom good finishing (Double finishing sheet) to make it rust proof bent to profile of size 245mm width in -Z- section on either ends fixed horizontally along the length between column pillars. Also it contain FRP Moulded Ball of 14”Dia x 2mm thick at the central top for its beautification. Each sheet enamel painted in red color. Each such sheet properly riveted to horizontal sheets. The complete item is fitting at site with installation. (Including fixing at site and supervision & transportation & all type taxes with defect liability period of 2 years free of cost.

Air Walker: Providing designing and fixing of Air Walker of size 1100 x 550 x 1480mm fabricated with main post of 114mm dia and 2.5mm thick and rest of pipes or 40mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped gaivahized and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints or pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps base plate cover shall be made or virgin LLDPE plastic by rotational moulding with minimum 3mm thickness UV resistant and colour as approved by Engineer in charge. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments maufactured by reputed company duly oil sealed and self lubricated to be approved by Engineer in charge. The equipment shall be fitted with in built limiters. The equipments shall be fixed on ground with concrete or minimum strength M-25 and J shaped welded bolts and when concrete is set fixing the equipment on to it and cover nuts and bolts with base plate cover all complete as per directions and approval of Engineer in charge regarding material shape of equipment colour all complete as per directions and approval of Engineer in charge regarding material shape of equipment colour (of metal seat and pedal) and fixing of equipments etc (the cement concrete and excavation work shall be paid for separately).

Double Cross Walker/ Cross trainer double:- Providing, and fixing Double Cross Walker of size 1600 X 600 X 1600 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer -in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength N425 and J shaped welded bolts and once the concrete is set, fix

Leg Press: Providing designing and fixing of leg press of size 2000x550x1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micror thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars to be provided with high quality grip rubber on top end Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact of injury Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free duly oil sealed and selt lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitteed with in inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipments to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set fix the equipments on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer in charge regarding material shape of equipment colour on metal seat and base cover plate and fixing of equipments etc (the cement concrete and excavation work shall be paid for separately).

"Twister:- Providing, and fixing Twister of size 1700 X 1300 X 1300 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and ishapod welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Officer -in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of. equipment etc." The rates are inclusive of all taxes like GST, Transportation, Installation in CC to full satisfaction of engineer in charge complete in all respect.

Chain Swing (2 seater): 10’L x 5’.5W x 8’.5 H. Horizontal frame & vertical legs is of m.s pipe 2” x 12 gauge. It stays with m.s pipe 1” x 12 gauge. Swinging seats-2 nos is of FRP molded Seat of 2mm thick fitted with m.s pipe ½” frame x 12 gauge which hang with m.s chain 6mm thick duly plated with ball bearing & m.s flat 6mm thick housing with suitable PU Primer & PU Paints.

Merry-Go-Round (4 seater): 5' Dia. Main frame is of m.s sq. pipe 2" x 2" x 14 G and having suitable handle & foot-rest is of m.s round pipe 3/4" x 12 Gauge. Central pipe is of m.s pipe 3" x 12 G which further supports with m.s pipe 1” x 12Gauge with heavy duty shaft 50 mm thick & ball bearing assembly. It consists of 4 no Chair made of Molded FRP Plastic in 3mm thick with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.

Knee HIP Raise:- Providing, and fixing Knee Hip Raise of size 1105 X 550 X 11480 mm make of Green Gym or Equivalent fabricated with main post of 140 rum din and 3.0 mm thick rest or the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Mao Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped

Multi Play Spiral-N-Tunnel Station Item code: ME-03 Covering Area: 30’L x 20’W It contains: FRP Spiral Slide 6mm thick inclined at 5’H – 1 no FRP Tube Slide inclined at 5’H – 1 no FRP Wave slide 6mm thick inclined at 5'H - 1 no FRP Bowl slide 6mm thick with FRP Entry Gate inclined at 3’H – 1 no FRP Stair 3mm thick inclined at 3’H- 1 no FRP Platform Hex. Shape 5mm thick in 7’Dia – 2 no. FRP Canopy – 2 no. FRP Deer Figure on canopy – 2 no. FRP Fancy Railing Frog & Monkey Shape – 4 no. FRP Walking Bridge 7.5’ Long – 1 no. M.S Spring Climber – 1 no. M.S Zig-Zag Climber – 1 no M.S Chain Net Climber – 1 no M.S Climbing Ladder – 1 no M.S Station in which vertical m.s pipe is of 3” x12G of I.S.I Mark – 2 no Including Trans portion & Fixing and all type of taxes .

Rowing machine: Providing designing and fixing rowing machine of size 1280x800x1150 mm fabricated with main past of 114 mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber Foothold shall be made up of nylon alloy with rounded edges to prevent any impact or injury and base cover to be made up from virgin LLDPE

Seated chest press: Providing designing and fixing of seated chest press in a pair of size 1800 x 700 x2000 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick.

Wave Slide: 9’.5 L x 5’H. Wave slide is of molded Fiberglass Reinforced Plastic (FRP) of 6mm thick and climbing ladder is of m.s pipe 1” x 12 gauge & m.s rectangular pipe

Air Swing: Providing designing and fixing air swing in pair of size 1150 x 900 x 1250 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury. Seats and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete or minimum strength M-25 and J shape welded bolt and once the concrete is set, fix the equipments on to it and cover with the base plate. All complete as per direction and approval of engineer in charge regarding material shape of equipment colour on metal seat and base plate and fixing of equipments etc (the cement concrete and excavation work shall be paid for separately).The rates are inclusive of all taxes like GST, Transportation, Installation complete in all respect to full satisfaction of engineer-in-charge

Elliptica exerciser: Providing designing and fixing elliptical exercise of size 1200 x 540 x 1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior

Sea-Saw (4 seater): 8’ L x 5’.5 W x 15” high. Frame is of m.s pipe 2” x 12gauge. Sitting planks is of m.s pipe 2” x 12 gauge and its cantilever & handles is of m.s pipe ¾” x 12 Guage .Sitting seats-4nos is of molded FRP material in 3mm thick with suitable PU Primer & PU Paints.

Bidder Name

Amount

M/s Sami Greenmax Landscape Pvt. Ltd.(GSTN-06AAPCS4484A1Z9)

agrisense landscape(GSTN-06AJIPS5096F1ZU)

M/s Lakshay and Company(GSTN-NA)

M/s Lakshay and Company

agrisense landscape

M/s Lakshay and Company

agrisense landscape