Construction of Permanent building for Fire and Rescue Services Station with development works at Kallikudi in Madurai District (Re-tender)

Amount

1.1) Earth work excavation for foundation in all soils (including refilling) a. 0 to 2 mt.

1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.6) Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

2.6) Supplying and filling with 40mm HBSJ

2.7) Supplying and filling with 20mm HBSJ

7.2) Supplying and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

21.2) Teak wood Wrought & Put up a. T.W. over 2.00 m & below 3.00 m

b. T.W. below 2.00 m length.

23.3) Supplying and fixing of Magnetic door catches

24) Manufacturing & supply of steel windows (weight basis)

25) Supplying and fixing of MS hold fast

30) Finishing the top of flooring with cement concrete 1:3, 20mm thick Ellispattern flooring (No sand)

31) Weathering course over roof slab with proportion of brick jelly 20mm to lime (32:12 1/2) by volume

37.1) White washing 3 coats (slaked)

39) Supplying and fixing of MS Grills in position

40) Painting 2 coats - New "wood work"

41) Painting 2 coats - New "iron work"

46) Supplying and fixing of 20 mm dia Alu. Hanger Rod

47) Supplying and fixing of Alu. Towel rail 75 cm long

48) Supplying and fixing of 5 pin Coat stand

49) Supplying and fixing of Chromium plated 8 gauge picture hook

50.3) Supplying and planting avenue trees

50.4) Providing Tree guard

52) Supplying and laying of PVC Water supply (ASTM) pipe a. 32 mm dia

b. 25 mm dia

52.1) Supplying and fixing of G.I. Pipe 20mm dia for hot water line (Fully concealed in walls)

53.3) Supplying and fixing of C.I. steps (5 Kg)

55.2) Supplying and fixing of Flat Back Urinal

Electrical arrangements 69) Supplying and fixing of 15 Amps 3 pin Power plug socket

72) Supplying and fixing of Box type Fibre Fan hook

73.1) Supplying and fixing of 3 phase Distribution board with 6 way per phase 32A per way with neutral link

74) Charges for assembling and fixing of ceiling "Fan"

76) Supplying and fixing of 8 SWG G.I. wire

77.3) Supplying and fixing of TV/Telephone line Socket

77.4) Supplying and fixing of 20mm dia PVC pipe for TV/Telephone line

78) Providing Earthing Station using pipe electrode as per IS3043 (Type I)

86) Providing Pre-constructional Anti termite treatment

Annexure 2.1.1) Supplying and filling the basement with gravel

2.1.3) Supplying and filling in foundation and basement with Crushed stone sand

2.1.4) Supplying filling the lowlying area with conveyed gravel in the lowlying area

3.1.1) C.C.1:5:10 using 40mm size HBSJ for Foundation & Basement using crushed stone sand

3.2.1) P.C.C. 1:2:4 using 20mm size HBSJ for Foundation & Basement and other similar works using crushed stone sand with Admixture

3.10.1) P.C.C. 1:3:6 with 20mm HBSJ using crushed stone sand for foundation and basement

4.4.1) Standardized Concrete mix M20 Grade using crushed stone sand with Admixture a. In Foundation and basement

6.6.1) Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture

8.4.1) Standardized Concrete mix M20 Grade using crushed stone sand with Admixture a. In Ground Floor

b. In First Floor

9.6.1) Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture a. In Ground Floor

b. In First Floor

10.6.1) Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7 cm (8 ¾"x4 ¼ "x2 ¾") 110 mm tk (B.P.) using crushed stone sand with Admixture a. In Foundation and basement

b. In Ground Floor

c. In First Floor

11.6.1) Brick work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") 70 mm tk using crushed stone sand with Admixture (B.P.) a. In Ground Floor

12.1.1) Brick partition work in C.M. 1:4 using kiln burnt Country bricks of size 22 x11x 5 cm (8¾ "x 4¼ "x 2") 50mm tk using crushed stone sand with Admixture a. In Ground Floor

14.2.2) Precast Cupboard slab 20mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand with Admixture 20mm thick a. In Ground floor

14.2.3) Precast Cupboard slab 40mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand with Admixture 40mm thick a. In Foundation & Basement

b. In Ground Floor

18.1) Formwork using M.S.Sheet a. For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b. Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

c. For Square and rectangular columns and small quantities

d. For Vertical wall

f. For Curved surface

21.5.2) Supplying and fixing of soild UPVC door shutter with frame

21.6.2) R.C.C. Door frames of size 100x75mm with one edge grooves size 't' x 20mm using standardised concrete mix M 20 Grade using crushed stone sand with Admixture a. 900 x 2100mm

22.3.3) Cup board/ward robes double leaf shutters using 9mm thick phenol bonded BWR grade plywood, TW frames, styles & rails including two coat enamel paint over one coat primer with brass screws

22.9) Solid core TW flush door with Teak ply on both sides and TW lipping alround (35mm thick) Single leaf shutter Suitable for door of size a) 900 x 2100mm

23.2.1) Supplying and fixing of 4mm thick pin headed glass panels with Aluminium beedings

26.1) Flooring in C.C.1:5:10 using 40mm size HBSJ using crushed stone sand

28.1) Finishing the top of flooring in C.M. 1:4, 20mm thick. using crushed stone sand with Admixture

29.8.1) Supplying and fixing of Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand

29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand

32.1.1) Pressed tiles (23cmx23cmx20mm thick) mixed with water proofing compound @ 2% by weight of cement using crushed stone sand

33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture

34.1) Plastering in C.M. 1:4, 12 mm tk. using crushed stone sand with Admixture

35.1.1) Plastering in CM 1:3, 12 mm tk. with Admixture and mixed with WPC using crushed stone sand

35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand with Admixture

36.1) Plastering for Border in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.4.2) Supplying and applying Wall putty (one coat) over the new cement plastered walls

43.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods

44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab in Standardised concrete mix M20 Grade by using 3mm-10mm HBGS Jelly using crushed stone sand with Admixture a) Providing pit

b) Augering 30cm dia

44.3) Providing Rain water Harvesting Well ring of Circular shape of 90cm dia, 60cm depth using Standardised mix design M20 with Admixture

44.6) Supplying and fixing of PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe

50.2.1) Providing precast Kerb stone in C.C. 1:3:6, 450x300x150 mm using crushed stone sand

50.5.1) Supplying fabricating and erection of M.S Scheme name board using crushed stone sand with Admixture

50.6.1) Precast slab 50 mm tk.in C.C. 1:3:6 mixed with fibre using crushed stone sand

52.4) Supplying laying fixing and jointing the following PVC pipes as per ASTM D-1785 of schedule 40 threaded PVC water supply ASTM pipe (fully consealed in walls) with necessary PVC/GI specials c. 20mm dia

53.4) Supplying and fixing of CI Manhole cover of size 60 x 60cm (50kg weight)

53.5) Supplying and fixing of porcelin Wash hand basin (White without Pedestal Type), superior variety of size 550x400mm (22”x16”)

54.1.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (long body)

54.2.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (Short body)

56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - in G.F. using crushed stone sand

57.2) Supplying and fixing of EWC (White) 500mm with PVC SWR grade "P" or "S" Trap

58.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia

58.4) Supplying, Laying & Concealing the 50mm dia PVC (SWR) pipe with ISI mark type - 'B' with relevant specials.

58.5) Supplying and fixing of PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl a) 110mm dia PVC SWR pipe of 3m with required PVC cowl & PVC specials etc.,

59.5.2) Supplying and fixing of Gully Trap using crushed stone sand

60.1) Supplying and fixing of PVC Nahani trap (4way/2way)

61.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110mm dia UPVC Non Pressure pipe

62.1.1) Supplying and fixing of PVC Bend fabricated 6 KSC PVC specials as per IS 10124/1982 Part II a) 110mm dia PVC Bend

62.2.1) Supplying and fixing of PVC Equal Tee (mould) BIS 7834/1975 PVC specials as per IS 10124/1982 Part-II a) 110mm dia PVC Equal Tee

64.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose with bakelite battern holder

c. Calling bell point with Buzzer/Calling bell

65.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan Point

66.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Switch Board Itself.

68.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Convenient Places.

71.2) Supplying and fixing of 32 Amps triple pole main switch

75.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep

77.5) Run off 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed

77.6) Run off 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed.

79.1.1) Supplying and fixing of 1 No. of 32 Amps Fuse Unit

79.2.1) Supplying and fixing of 3 Nos. of 32 Amps Fuse Unit

80.1) Supplying and fixing of 450x375x20mm T.W. plank

85.1) Supplying of G.I pipe 40 mm dia, 'B' class

87.1) Supplying and fixing of Three Phase ELCB/RCCB

90.2) Providing additional strutting to centering of plain surface

99.1) T.W.single leaf Panelled door shutter with brass fittings Suitable for door of size a. 1000 x 2100mm

100) Supplying and fixing of 9 watts LED Bulb

101) Supplying and fixing of 25 watts LED bulb with street light fittings

101.4) Supplying and fixing of 80 watts LED focus light fitting with LED

101.5) Supplying and fixing of ornamental gate light for compound wall

102) Supplying and fixing of 4'18 watts crystal LED tube light

103) Supplying and fixing of Bulk Head fitting suitable for 12 watts LED bulb

104) Supplying and fixing of 12 watts bulb for bulk head fittings

112.1) Supplying and fixing of Exhaust Fan 225mm dia

114) Supplying and delivery of following PVC Aluminium armoured LTUG cable a) 4 core 16 Sqmm PVC Aluminium armoured LTUG cable

115) Labour charges for laying of 4 core 16 Sqmm PVC Aluminium armoured LTUG cable below ground level

116) Labour charges for laying of 4 core 16 Sqmm PVC Aluminium armoured LTUG cable above ground level

117) Supplying and fixing of Brass cable Gland suitable for PVC Aluminium armoured LTUG cable a) 4 core 16 Sqmm brass cable gland

119) Supplying and delivery of 3 HP clear water vertical wet type submersible pumpset three phase suitable for borewell Duty - 50 lpm x 100 m

119.1) Supplying and delivery of 2 HP Electric Monoset Centrifugal pump three phase suitable for sump Duty - 250 lpm x 20 m

120) Labour charges for erection of submersible pumpset in borewell upto 5 HP

120.1) Labour charges for erection of Horizontal shaft, Centrifugal pumpset upto 3 HP (coupled/monoblock)

121.1) Supplying and fixing of three phase panel board of direct online starter with two level guard and auto start (3 HP)

121.2) Supplying and delivery of Direct online starter with single phasing preventor 2 HP for Monoblock motor

122) Supplying and fixing of following dia of the GI, GM & PVC specials a) 50 x 32 mm dia GI Reducer Tee

b) 50mm dia GI Coupling

c) 50mm dia GM Gate valve (Heavy Duty)

d) 50 mm dia GM Non return valve

e) 50 mm dia GI Union

f) 50 mm dia GI Hex Nipple

g) 50 mm dia CI Foot valve with stainer

h) 50mm dia GI Tee

i) 50mm dia GI Bend

j) 32mm dia GI Union

k) 32mm dia GI Elbow

l) 32 mm dia GI Hex Nipple

m) 25mm dia GI Coupling

n) 50 mm dia PVC Coupling

o) 50 mm dia PVC Bend

p) 32 mm dia PVC Coupling

q) 32 mm dia PVC Bend

123) Supplying and Delivery of 3 core of 4 Sqmm flat type copper cable

124) Supplying and delivery of following dia GI pipes 'B' class in position a) 25mm dia GI pipe

b) 40mm dia GI pipe

c) 50mm dia GI pipe

125) Supplying and delivery of following dia PVC Pipe a) 32mm dia PVC pipe/10 Kg/cm2

b) 50mm dia PVC pipe/10 Kg/cm2

125.1) Labour charges for laying of GI and PVC pipe below ground level

125.3) Supplying and delivery of 32mm dia UPVC column pipe

126.1) Supplying and fixing of following dia M.S. Clamp set a) 50 mm dia MS clamp set

127) Supplying and delivery of Nylon rope for tieing of submersible motor pump

129) Supplying and fixing in position of TamilNadu Government Logo emblem a) 60 cm size

129.1) Supplying and fixing in position of Aluminium die casting TNPHC Logo emblem a) 45 cm size

130) Supplying and fixing of Aluminium Dye cast letters a) Aluminium Dye Cast letter 12" size

b) Aluminium Dye Cast letter 9" size

130.1) Supplying and fixing of Plastic name board of required size

154) Supplying and fixing of TNEB Meter Board suitable for 3 Phase 100A service connection

132) Drilling of 150mm dia borewell in hard rock areas

133) Supplying and fixing of following dia PVC casing pipe as per IS 12818/2010 a) 150mm dia PVC Casing Pipe

134) Supplying and fixing of 160mm dia PVC end cap suitable for covering the 150mm dia borewell casing pipe

163) Supplying and fixing of 63 Amps triple pole main switch with fuse unit

344.2) Supplying and fixing of Bevelled Edge Mirror of size 500x400x5.5mm

361.1) Supplying and laying of Concrete designer tiles flooring in C.M. 1:3 (one of cement and three of crushed stone sand) 20mm thick

367) Providing wooden melamine polish for main door new wood work

378.2) Supplying and fixing of Vitrified tiles (Ivory) in CM 1:3, 20mm tk using crushed stone sand

448.2) Providing Tee with end cap 32mm dia instead of PVC Bottle trap

796) Two coat of Exterior emulsion paint including primer for outer wall surfaces

796.1) Two coat of Plastic emulsion paint including primer for inner wall surfaces

N MUNIASAMY

T CHANDRASKEAR