Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹75.9 LAccepted-Finance GE W COLABA MUMBAI | CHANDRAPUR | MAHARASHTRA | 441205 | L1 | Accepted-Finance Lowest One | |
| 2 | L2₹86.5 L+₹10.5 L (13.9%)Rejected-Finance FLAT NO A 102 ASHOKVAN RAJSHIV CO OP HSG SOC SHIV VALLABH ROAD DAHISAR EAST MUMBAI 400 068 | MUMBAI SUBURBAN | MAHARASHTRA | 400068 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹95.3 L+₹19.4 L (25.5%)Rejected-Finance NOT AVAILABLE | L3 | Rejected-Finance Other than lowest | |
| 4 | Rejected-Technical ROOM NO 997 GALI NO 3 PART NO 3 GANESH MURTHY NAGAR CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | - | Rejected-Technical Due to non enlisted in appropriate class. |
Tender Value
Refer Docs
EMD Value
₹1.9 L
Closing Date
5 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NW NOFRA
Dr Homi Bhabha Road New Navy Nagar Colaba Mumbai
REPAIR AND MAINT OF SUNKEN AT MD OTM ACCN AND REPAIR REPLACEMENT OF WOODEN ALUMINIUM JOINERY AND REPAIR MAINT OF BARRACKS SHED AND OTHER TEMP ACCN UNDER AGE BR II OF GE NW NOFRA
2023_MES_594638_1
8173
Open Tender
Civil Works
Item Rate
300 days
Mumbai
Please refer tender documents
8 documents required · 8 mandatory
₹1,000
GE NW NOFRA
₹1.9 L
Yes
14 Jun 2023
11 May 2023
7 Jun 2023
11 May 2023
5 Jun 2023
22 May 2023
11 May 2023 - 18 May 2023
Amount
Note : The tenderer shall note that before quoting his unit rate, all items of works shall be executed in high rise building ( upto 16th floor building) & provision of necessary scaffolding & safety measures.
Treatment of sunken floor slab compraises of the following specifications and all as specified :-
(i) M&L for cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding concrete to achieve proper slope including cutting holes in bricks or RCC wall for spout (Cost cutting holes and pipes shall be measured and paid separately)
(ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out.( WPC shall be measured & paid separately)
(iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy putty.
(iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean.
(v) M&L for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed.(This item shall be measured and paid separately)
(vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound 3% by wt of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout.( WPC shall be measured & paid separately)
(vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint (this item shall be measured & paid separately).
Note :- Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. Cost of testing is included in the rates quoted above.
Cutting holes in bricks or RCC walls exc half brick wall built in cement mortar including making good after inserting and setting spouts all as specified.
S&F GI pipe 25mm dia medium grade laid on sunken floor complete all as specified and direced by EIC.
M&L for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed.
M & L Injection grouting in RCC slab. The location of seepage/leakage, if any, shall be identified and marked. The portion of the slab where leakage/seepage is observed shall be repaired with grouting. The area of dripping/leakage shall be cleaned to expose the surface. Mark the spots for injection grouting. If leakage is through a crack, mark grouting points along the crack in a staggered manner. If the leakage is across the area mark grouting spots in a grid pattern. Drill grouting holes so as to neatly fit the injection packers. Drilling to be done at an angle of 45 to the plane of grouting surface. Fix PVC/MS nozzles in the low viscosity, injecting polyurethane resin/epoxy grout using a grouting pump. Repeat the process after 1 or 2 days if the leakage continues at some point. allow to cure for 24 hours and seal the grouting holes appropriately using epoxy putty etc complete all as specified and as directed.
Supply only Integral water proofing compound.
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land
M&L for Non skid coloured ceramic tiles 7 to 8 mm thick(square/Rectanglar) area of Each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floor including 15 mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified.
M & L Glazed ceramic tiles in vertical surfaces 200x300mmx7mm thick including over 15mm thick rendering of cement mortar (1:4) for laying floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by the Engineer-in-Charge.
M&L for coloured glazed ceramic tiles 450x300x7 / 350x250 x7 mm mm thick but as on vertical surfaces such as skirting/dado including 15 to 20mm thick backing coat in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.
Demolition of Cement concrete in any description and in any position not other wise specifically provided directed by Engineer-in-Charge and removal of debris to out side MD land.
M&L PCC 1:7:12 with brick aggregate as in lean concrete/filling concrete
Taking down Cast iron pipe of dia upto 100mm fixed on wall or in floor including all fittings upto 15th floor of bldg. complete all as specified.
S&F 100 mm dia sand cast CI soil waste & vent pipe in any length with ears and jointed with neat cement paste fixed to wall upto 15th floor of bldg., complete all as specified.
Taking down Cast iron pipe of dia 100mm fixed on walls and re-fixed on wall including all fittings after cleaning properly and paint with bitumenious paint upto 15th floor of building complete all as specified.
Taking down Cast iron pipe of dia 75mm fixed on walls and re-fixed on wall including all fittings upto 15th floor of building complete all as specified.
S&F 75 mm dia sand cast CI soil waste & vent pipe in any length with ears and jointed with neat cement paste fixed to wall upto 16th floor of bldg., complete all as specified.
S&F 100 mm dia sand cast CI soil waste pipe in any length with or without ears and jointed with neat cement paste, laid in trenches or in floors.
S&F 75 mm dia sand cast CI soil waste pipe in any length with or without ears and jointed with neat cement paste, laid in trenches or in floors.
M&L in repair 100mm cast iron Nahani / Floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) upto 15th floor of bldg., complete all as specified.
S&F in repair 100 mm dia sand cast CI bend of any radius with ovel access door and jointed with neat cement paste , complete all as specified.
S&F in repair 75 mm dia sand cast CI bend of any radius with ovel access door and jointed with neat cement paste, complete all as specified.
S&F in repair 100 mm dia branch piece single length branch of any radius with ovel access door and jointed with neat cement paste , complete all as specified.
S&F in repair 100 mm dia double branch piece branch of any radius with ovel access door and jointed with neat cement paste, complete all as specified.
S&F in repair 75 mm dia branch piece single branch of any radius with ovel access door and jointed with neat cement paste. Make :- Neco, TISCO, Jindal, Kalinga
S&F in repair 75 mm dia branch piece double branch of any radius with ovel access door and jointed with neat cement paste. Make :- Neco, TISCO, Jindal, Kalinga
S&F as in repairs WHB/Kitchen sink collapsible waste pipe out let upto Nahani trap complete.
S&F in repairs 15mm pillar taps, cast copper alloy with captain heads chromium plated screw down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed
S&F as in repairs 10 ltr capaciaty PVC low level flushing cistern 10 litre capacity with 32mm bore polythene flush pipe of sufficient lenght including internal fitting (valve less syphonic) etc. upto 15th floor of bldg. complete.
Removing and refixing only high or low level flushing cistern (inclusive of brackets),and connection to pipes .
Removing and refixing Vitreous china wash basin white flat back any size complete.
S&F in repairs white vitreous china wash down water closet pan with PVC white seat cover with mild steel chromium plated or aluminised hinging device including connection to down pipe PVC connection and flushing pipe all as specified.
S&F in repairs, Plastic water closet seat covers, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.
S&F stainless steel grating cover fixed in repairs to suit the 100mm/75mm dia nahani trap fixed with cement,complete all as specified.
S&F as in repairs Wash hand basin vitreous china White flat back size 550mmx400mm including cast iron brackets, chromium plated waste coupling, PVC connection, waste pipe up to floor trap etc in repair all complete as specified.
S&F as in repairs 15mm bore CP Stop valves/ angular stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed ( make - Jaquar,Cera, Marc.)
S&F in repairs CP bib cock 15 mm bore complete all as specified and directed.
S&F as in repairs health faucet ABS Body with 8 mm dia 1 mtr flexible tube including wall hook , complete all as specified.
S&F in repairs aluminium anodised tubular towel rail 20mm dia D type 60 cm long between flanges , complete all as specified.
S&F as in repairs brass chromium plated shower rose 125mm size, including fixed to steel tube, complete all as specified.
Taking down and refixing 15mm bore stop cock / bib tap/ pillat tap/shower/ health faucet etc. to iron /CPVC pipe, complete all as specified.
S&F 100mm dia CI sanitary connection- short connections pipe of length upto 300mm
M&L Vitreous water closet squatting pan (orissa pattern) white , front or back inlet any pattren complete fixed in repairs complete all as directed.
S & F as in repairs Cast iron floor trap 75 mm dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2;4) all as specified
Removing and refixing only Vitreous china EWC complete any size complete.
Resecuring or easing & adjusting without taking down shutters of any description exc 1 sq. m and n exc 2 sq. m Each
Removing of dismantled/ demolished material / old debris/tiles etc by mechanically or manually, outside MD land as and when directed.
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water, upto 15th floor of bldg.,complete all as specified.
Rendering 15mm thick cement plaster in cement mortor 1:6 on brick or concrete surfaces in patches, surfaces to be finished even and smooth without using extra cement,upto 15th floor of bldg.,complete all as specified.
M&L plastering 10mm thick in CM 1:3 in ceiling finishing even and smooth without using extra cement, upto 15th floor of bldg.,upto 15th floor of bldg.,complete all as specified.
Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions & upto 15th floor of bldg.,complete all as specified.
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat primer on with required thickness wall care putty (JK/Birla) all as specified and directed.
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of primer on wall complete all as specified and directed.( Work carried out upto 15th floor of building from outside)
Taking down chowkats or frames area n exc 1.5 sqm Each but with shutters (without taking off shutters from the frame)
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings.
S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified
S & F 100mm size medium weight stainless steel butt hinges, complete all as specified.
S&F 150 mm size aluminium alloy handles, cast type anodised, ISI marked all as specified.
S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.
S&F GI water tubing 20mm bore medium grade (ISI marked) including with all fittings and fixed to wall /ceilings laid in floor or concealed upto 16th floor of bldg. including taking down old GI tubing complete all as specified and directed. Make :- Tata, Swastik, Jindal, Prakash, Surya
S&F GI water tubing 15mm bore medium grade (ISI marked) including with all fittings and fixed to wall /ceilings laid in floor or concealed upto 16th floor of bldg. including taking down old GI tubing complete all as specified and directed. Make :- Tata, Swastik, Jindal, Prakash, Surya
S&F 20mm bore of CPVC pipes having thermal stability for hot & cold water supply including all plain and brass threded fittings fixed of required sizes including with all fittings and fixed to wall /ceilings with suitable clamps, laid in floor or concealed of 20mm size (in high rise building (upto 16th floor)including scaffolding) and incl. taking down old tubes of any desc. complete all as specified and directed by Engineer-in-Charge.
Taking down eaves gutters and rainwater pipes of any dia (any size or pattern ) including all fittings, heads, shoes, bends, swan necks etc (Measured overall as fixed along the centre line over fittings and accessories) & ht. upto 16th floor of bldg., complete all as specified.
S&F 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips, bends, elbows, shoes etc & ht. upto 16th floor of bldg., complete all as specified.
S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips, bends, elbows, shoes etc & ht. upto 16th floor of bldg., complete all as specified.
S&F PVC (SWR) bends of 160 mm bore & ht. upto 16th floor of bldg., complete all as specified.
S&F PVC (SWR) bends of 110 mm bore & ht. upto 16th floor of bldg., complete all as specified.
M&L for preparation of old decorated wall surfaces by scrapping, washing & rubbing down and applying two coats of oil emulsion distemper over a coat of primer incl preparation of surfaces and filling putty in uneven surface complete all as specified and directed.
M&L for preparation of old decorated wall surfaces by and applying one coats of oil emulsion distemper complete all as specified and directed.
M&L preparation of old surfaces of ceilings by washing, rubbing down and stopping of distempered surfaces and applying two coat of white wash etc all as specified and directed.
M&L for applying one coat of oil emulsion distemper on ceiling incl preparation of surfaces all as specified and directed. .
M&L for light shade coloured vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of Each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointee in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 , complete all as specified and directed.
M&L for light shade coloured vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of Each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting incl 15mm thick backing coat in CM 1:4 , complete all as specified and directed.
M&L for Clean the wall surfaces thoroughly, it should be free from oil, grease, dust, dirt, fungus and moss and thorough wire brushing followed by sanding with emery paper, Remove the existing paint, neroo or instant lime, etc. while treating internal damp walls. Fill the cracks & grooves with Dr. Fixit Dampguard Classic and cement modified putty & allow it to dry for at least 24 hours. Apply one coat of Dr. Fixit Dampguard Classic followed by a coat of Dr. Fixit Dampguard Classic Putty prepared as per manufacturers instructions and finally second coat of Dr. Fixit Dampguard Classic as per manufacturers instructions
M&L for applying white cement mixed with polymer bases water proofing compound inside the floor/nahani trap and inside P/S trap, complete.
M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint including external window with necessary scafolding for high rise bldgs.
M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint & ht. upto 16th floor of bldg., complete all as specified.
S&F in repairs fancy type drapery rods, powder coated aluminium of 20-25mm size with / including fixing brackets, etc.all as specified.
Dismantling water tank of capacity exc. 250 Ltrs but n.exc. 500 ltrs.
Supply and fix in repair white rectangular PVC water storage tanks (Loft tank) of capacity 300Ltrs with complete fitting including fixing 03 Nos tank nipples of GI/ PPR with washer for out let and inlet all as per manufacturers instructions including disconnecting service connections/over flow pipes complete all as specified and directed.
Supply and fixing in repair PVC modular 20mm thick as in proflie including 'C' channels, aluminium U clip all around the profile suitable for 300 ltr capacity loft tank ,complete all as specified and directed.
Supply and fixing as in repairs Mild steel angle iron section (Fe 290 Gde E 165) fixed independently, without connecting plates, etc incl cutting to required length, drilling, welding etc and embedding in Brick work incl Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 as required as in loft Water tank base in bathrooms/kitchens etc complete all as specified and directed
M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.
Supplying and fixing in repairs brass float valve flat type of size 15 mm bore, high pressure with polythene float & fly nut complete, screwed for GI pipe of following sizes including necessary GI fittings complete all as specified.
Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame)
Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each
Taking down shutters of any description n exc 1 sq.m each
S&F powder coated (colour of coating as directed) aluminium (minimum 25 micron thickness of coating) of various section as required/suitable for doors, window & partion/Ventilator (sliding /or openable type)etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like jointing cleats, glazing clips, rubber neoprene packing. anodised aluminium snap beading screws etc. rubber beading, clips locking arrangement, handle, sealant etc all as specified and directed.
S&F aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 104, 7.5 mm thick all as specified and directed.
S&F 3mm thick fiber glass sheet (frosted) and fixed as in ventilator / louvers aand cutting as per size requirement, complete all as specified and directed.
S&F 2nd class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified and directed.
S&F 35mm thick 2nd class HW Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats.
S&F 2nd class hard wood 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze etc all as specified and directed.
S&F 2nd class hard wood 30 mm thick, glazed and skeleton shutters, windows, ventilators, etc. are provided with stiles and rails open rebated and prepared to receive glass, gauze etc (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze etc all as specified and directed.
S&F 30mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side, complete all as specified.
Taking down shutters of any description not exc 1 Sqm each and refixing in the same opening after easing & adjusting all as specified
Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each and refixing in the same opening after easing & adjusting all as specified
Resecuring or easing & adjusting without taking down shutters of any description n.exc 1 Sqm each
Resecuring or easing & adjusting without taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each
Dismantling stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar, complete all as specified.
M&L 16 to 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over and including 15mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding and rounding all as directed.
S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to aluminium frame, all as specified and directed.
S&F in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed incl wooden/aluminium beading to wooden/aluminium frame all as specified and directed.
S&F in repairs 18/19 mm thick prelaminated partical board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work including 6 mm thick teak wood beading all around complete all as specified and directed.
S&F in repairs 12 mm thick prelaminated partical board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work including 6 mm thick teak wood beading all around (as in cub board as per required size) complete all as specified and directed.
S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.
S&F as in repairs 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.
S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.
S&F as in repairs for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.
S&F as in repairs for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.
S&F as in repairs 150 mm size aluminium alloy handles, cast type anodised, ISI marked all as specified.
S&F 100 mm size aluminium alloy handles, cast type anodised, ISI marked all as specified.
S&F as in repairs 100 mm size aluminium alloy handles, cast type anodised, ISI marked all as specified.
S&F as in repairs butt hinges 100 mm stainless steel hinges medium weight and fixed.
M & L for MS flat for hold fast. Conforming to Fe-310-0 or Fe-410-0
M&L PCC 1:2:4 B1 (20mm graded aggregate) as in bed blocks, fixing of hold fast, copings, benchings, railing, bends etc incl necessary form work all as directed/specified.
S&F 150 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified
S&F as in repairs 150 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified and directed.
S&F 125 mm long hasp and staple safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F as in repairs 125 mm long hasp and staple safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F as 30mm width of flaps Continuous (piano) hinges, stainless steel, bright finish, complete all as specified.
S&F as in repairs 30mm width of flaps Continuous (piano) hinges, stainless steel, bright finish, complete all as specified.
S&F cast iron Casement stays, size 250mm, with hinged joint and two plates, with studs complete & fixed to wooden chowkats including necessary drilling.
S&F as in repairs cast iron Casement stays, size 250mm, with hinged joint and two plates, with studs complete & fixed to wooden chowkats including necessary drilling.
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished
S&F as in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished
Taking down MS grills n.exc 1.5sqm in each grill and refixing in same location, complete all as specified.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/iron frames glazed with putty or wooden beads/aluminium beads complete all as specified.
S&F 3 mm thick sheet glass ordinary quality and glazing with new or old wooden beads in square all as directed.
S&F 3mm thick sheet glass froasted or obscured one side and glazing with new or old wooden beads/ aluminium beads in square all as directed.
M&L for Securing glass of any description in existing wooden/ aluminum frames glazed with putty/ silicon silent/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work, complete all as directed.
M& L for taking down existing aluminium sliding window from aluminium frame carefully & refixing in the same position after replacing bearing wheels fixed at botom of shutter (02 Nos. in each shutter 1st quality) including all fittings, screws, etc, complete all as directed.
Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.
Material and labour for brick work with sub class "B" bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified.
S&F in repairs aluminium die cast door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed all as specified and directed.
M&L for preparation of newly wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surfaces.
S&F in repairs for 7 levers Godrej Night Latch fixed to wooden chowkat, complete all as specified.
S&F as in repairs solar control film 25micron reflective type sticked to glass panes as per instructions of mnufacturers, complete.
M&L for Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant of approved quality and direction of Engineer-in-charge complete.
Dismantling wrought iron or mild steel work of any description incl removing from site complete all as specified.
S&F MS framed work as in grills, gratings etc with ends of bars shouldered /welded or riveted or forged into spikes framed guard bars, grills, barred iron doors, ladders, framed balusters, walkways, railings and similar works confirming to FE 290 Gde E-165 complete all as specified and as directed.
S&F as in repairs Mild steel, plain, black sheet 1mm thick in hearths, covering to door shutters, covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed,holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc as required complete all as specified.
M&L for 20mm thick plastering in cement & sand mortar 1:4 in mixed with water proofing compound on fair faces of brick work or stone masonary surfaces, finished even and smooth (w/o using extra cement) all as specified and directed (WPC shall be mesured and paid seperately) incl all necessary scaffolding etc complete.
Preparation of old decorated surfaces of walls and applying one coat of acrylic emulsion exterior grade (100%) incl all necessary scaffolding etc complete all as specified and directed.
Preparation of old decorated surfaces of walls and applying two coat of acrylic emulsion exterior grade (100%) incl all necessary scaffolding etc, complete all as specified and directed. .
S&F Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections confirming to Fe 410 -W (Gde-E-250) quality A, complete all as specified.
M&L for 1.25 mm thick mild steel, plain, black sheet as in steel door shutters cut to size and welding to angle iron framework in repairs complete all as specified.
M&L for preparation of old steel surfaces of any description and applying one coat of synthetic enamel paint complete all as specified incl all necessary scaffolding etc.
S & F in repair for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including taking down old sheet of any description/ size complete all as specified and directed.
S&F in repair for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, including taking down old sheet of any description/ size complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in subbase, foundations, filling and mass concrete, complete all as specified.
M &L for 80 mm thick interlocking paver block machine pressed of any size and shape as approved by GE incl 50mm sand cushion and demolition of old paver blocks and removal to store.
M&L, for machine cut kota stone slab flooring 20-25mm thick over cement screed bed in CM (1:6) 15mm thick, & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.
M & L for Metal frame suspended 12.5mm thick gypsum false ceiling size 600mm X 600 mm including metal perimeter channel of size 0.50mm thick(having one flange of 20mm and another of 30mm and web of 27mm) along with the perimeter of ceiling, screw fix to block/brickwall/partition with the help of nylon sleeves then suspending with metal intermediate channel of size .80mm thick with two equal flanges each 15mm from the sofit at 900mm c/c with help of sofit cleats and Rawl plug including dismantling of existing ceiling.
S&F roof tiles, Mangalore pattern, interlocking at side joints, laid dry including dismatling of tiles.
S&F butt hinges 75 mm mild steel hinges medium weight and fixed.
Taking down & Refixing 15mm old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.), complete all as specified.
Taking down & Refixing 20mm old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.), complete all as specified.
S&F vitreous china wash hand basin flat back of size 550x400mm including bracket, brass chromium plated waste coupling of 32 mm bore and pillar tap 15mm bore dia fancy type complete as fixed in repair.
S&F in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms) all as specified and directed.
BOB ENTERPRISES
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .