CONSTRUCTION OF RCC OHT AND SUMP CAPACITY 2.00 LAKHS GALLONS AT PUMP J MAITREE NAGAR AT ARMAPUR ESTATE KANPUR

Amount

Lump sum price worked out by the Contractor for “BUILDINGS AND STRUCTURES” as listed in Schedule ‘A’ Part-I Representing ** _______ % ____________ percent *Above / Below the lump sum price of Rs. 1,81,10,000.00 inserted by the MES in Schedule ‘A’ Part-I

Lump sum price worked out by the Contractor for “SITE CLEARANCE & DEVELOPMENT” as listed in Schedule ‘A’ Part-II Representing ** _______ % __________ percent *Above / Below the lump sum price of Rs.89,166.90 inserted by the MES in Schedule ‘A’ Part-II

Lump sum price worked out by the Contractor for “DEMOLITION AND DISMANTLING” as listed in Schedule ‘A’ Part-III Representing ** _______ % ____________ percent *Above / Below the lump sum price of Rs.1,92,631.63 inserted by the MES in Schedule ‘A’ Part-III

Lump sum price worked out by the Contractor for “INTERNAL ELECTRIC SUPPLY” as listed in Schedule ‘A’ Part-IV Representing ** _______ % ____________ percent *Above / Below the lump sum price of Rs.11,197.00 inserted by the MES in Schedule ‘A’ Part-IV

Lump sum price worked out by the Contractor for “EXTERNAL WATER SUPPLY ” as listed in Schedule ‘A’ Part-VI Representing ** _______ % ____________ percent *Above / Below the lump sum price of Rs.2,82,581.30 inserted by the MES in Schedule ‘A’ Part-VI

Lump sum price worked out by the Contractor for “EXTERNAL ELECTRIC SUPPLY ” as listed in Schedule ‘A’ Part-VII Representing ** _______ % ____________ percent *Above / Below the lump sum price of Rs.43,295.93 inserted by the MES in Schedule ‘A’ Part-VII

Lump sum price worked out by the Contractor for “LIGHTENING PROTECTION AND AVIATION LIGHT FOR OHT” as listed in Schedule ‘A’ Part-VIII Representing ** _______ % ____________ percent *Above / Below the lump sum price of Rs.15,570.80 inserted by the MES in Schedule ‘A’ Part-VIII

Lump sum price worked out by the Contractor for “ROAD/PCC PATH/CULVERT/HARD STANDING ” as listed in Schedule ‘A’ Part-IX Representing ** _______ % ____________ percent *Above / Below the lump sum price of Rs.87,692.41 inserted by the MES in Schedule ‘A’ Part-IX

Lump sum price worked out by the Contractor for “COMPOUND WALL, FENCING AND GATE” as listed in Schedule ‘A’ Part-X Representing ** _______ % ____________ percent *Above / Below the lump sum price of Rs.9,00,070.25 inserted by the MES in Schedule ‘A’ Part-X

INTERNAL ELECTRIC SUPPLY (Sch 'A' Part IV (A)) S&F Ceiling fan, 1200mm sweep 5 star rate complete with down road and fixing emergy efficient connecting with fixble copper conductor to ceiling rose/connector complete all as specified and as directed. Make: Havells Model No: Turbo force SP or equivalent in Usha / Crompton Greaves.

S&F LED light fittings 1 x 20 W 4 batten type with polycobanate housing and intigrated electronic driver along with necessary connections and copper counductor complete all as specified and as directed. Make: Havells Cat No.: LUMILINEBS20WLED840SPCWH or equivalent in Bajaj / Philips / CG.

S&F LED Security light fittings 1 x 25W out door type with polycobanate housing and intigrated electronic driver along with necessary connections and copper conductor GI pipe light grade 25mm dia complete all as specified and as directed. Make: Havells Cat No.ENDURAPEALSL25WLED757 SASYTOPCMP or equivalent in Bajaj / Philips / CG. Note: Rate quoted by the contractor deemed to be inclusive of suitable size of GI pipe light grade and bend to as required shape, size not less than 01 Mtr including suitable size of 02 Nos of MS clamp, nuts and bolts.

EXTERNAL WATER SUPPLY (Sch 'A' Part VI (A)) Supply, laying and testing of centrifugally cast (spun) Ductile iron pressure pipe with socket end spigot ends suitable for push on jointing, class "K-9" of size following sizes duly applied with Zinc coating with finishing layer of bitumen on external of surfaces and cement mortar lining with bituminous seal coat on internal surfaces complete conforming to IS-8329 (2000) duly ISI Marked and all as specified and as directed: -

(a) 150mm dia

(b) 200mm dia

Supply, laying and testing of centrifugally cast (spun) Ductile iron pressure pipe with flanged ends, class "K-9" of size 200mm dia duly applied with Zinc coating with finishing layer of bitumen on external of surfaces and cement mortar lining with bituminous seal coat on internal surfaces complete conforming to IS-8329 (2000) duly ISI Marked and all as specified and as directed.

M&L for cutting extg CI Pipe 200mm dia inserting tee of size 200 x 200 x 200mm including all lead joints, Tee and excavation and earth work complete all as specified and as directed.

M&L for cutting extg CI Pipe 150mm dia inserting tee of size 150 x 150 x 150mm including all lead joints, Tee and excavation and earth work complete all as specified and as directed.

M&L fittings suitable for DI pipes S/S or flanged pipes bends, tapers, tees any type including collars caps plugs etc. of size upto 200mm dia pipes complete all as specified and as directed.

M&L for tighten joint suitable for DI pipe for the following size complete all as specified and as directed: -

(a) 150mm dia

(b) 200mm dia

Supply install test and commissioning of electro magnetic flow water meter flanged 150mm dia, Make: Flow tech, type full bore with PTFE line tube SS 316 seam Model No.FIS-EMFM-FE-108 suitable for water with density 1.0 MOC-ss-316 electrodes-SS-316 housing aluminium die cast weather proof IP-65 with suitable coil, coil housing, flow transmitter display, with suitable electric connecion with 230V AC supply including connected wiring (3 Core 2.5 Sqmm copper) and PVC conduit 25mm dia, heavy grade, ISI Marked etc. complete all as specified and as directed.

Supply install test and commissioning of Pumping set, centrifugal, electric driven with suitable electric induction motor energey efficient BEE certified IE-2 rating, 1480 RPM, operating on 3 phase 415 V 50 Hz supply, pump set complete suitable for 40 mtr head and 1900 LPM discharge, CI impellar, coupling and coupling guard, pressure gauge 0-7 Kgs make Fiebig with suitable chrome plated pipe stop cock and adapter inclusive of suitable base frame and PCC foundation complete all as specified and as directed and as per manufacturers recommendations.

M&L Construction of brick masonry valve pit chamber size 1200 x 1200 x 900mm (Internal dimension) built in 200mm thick walls with precast cement concrete blocks set in CM 1:4, rendering 10mm thick plaster on fair faces of brick work finished even and smooth (without using extra cement) and provided with 3mm thick MS sheet cover and angle iron frame of 40 x 40 x 6mm with hinges complete including locking arrangement including 50mm size brass 6 lever lock of make Godrej / Link as approved and necessary excavation and earth work, PCC bedding coping etc. and painting with one coat of primer and two coats of synthetic enamel paint on mild steel work internal and external surfaces complete all as specified and as directed.

S&F microprocessor based, based on 3 wire interfacing system between OH Tank / UG Sump sensor to main water level indicator unit showing indication in percentage by seven segment LED Display complete with all accessories data cable, transmiter and antena with alram system when tank is full or empty for OH tank and switching off pump set including wiring facility for starter when OH tank is full complete all as specified and as directed.

EXTERNAL ELECTRIC SUPPLY (Sch 'A' Part VII (A)) Fabricate, Supply install test and commissioning of CPRI approved indoor type all as per IS-8623 Part-I (1993) LT Panel board, IP-54 as per IS-2147-1962, suitable for 440 Volt, 3 phase & Neutral , 50 Hz supply, floor mounted weather and vermin proof fabricated from MS angle of size 50 x 50 x 5mm as base frame, with 2mm thick CRCA sheet (Make: Tata / sail) (load bearing members 2mm thick and non load bearing members such as doors partitions etc. of thickness 1.6mm thick), with gland plates at bottom with suitable Brass chromium plated glands, with cadmium plated high tensile nut and bolts washers, suitable barrel copper lugs for cable terminations complete with locking arrangements complete sheets bend, folded, compartmental duly powder coated with siemens grey colour after chemical treatment with 9 tank process, including LED RYB indicators incoming breaker, internal copper wiring suitable size aluminium bus bars, IP 54 protection 1100 V grade, including terminal adapters, spreader links on incoming and out going side MCCB's complete all as specified and as directed and comprising of the following: -

(a) Bus bar chamber with bus bar aluminium capacity 200 Amps 04 No, complete on epoxy insulators and colour coded sleeves (RYBN) complete. (b) MCCB four pole 440 V, 63-100 Amp 36 KA (Model DN1-250N) - 01 No. (Incomer) (c) MCCB as motor back up protection with suitable short circuit and over load protection accessories, TP 440 V, 40-63 Amp 50 KA (Type DNO 100M) - 02 No. (Outgoing for motors 02 Nos). (d) MCCB four pole 440 V, 40-63 Amp 36 KA (Model DNO-100 D) - 01 No. (For APFCP) (e) MCB TPN 440 V, 32 Amp 10 KA C Series - 02 Nos. (Spare Outgoing) (f) MCB SPN 240 V, 20 Amp 10 KA C Series - 03 No. (Outgoing for pump house lighting flow (g) Multifunction meter make L&T suitable to read power, KW/KVA / Voltage / Current / Frequency / PF etc. complete with suitable CT's - 03 Nos. (One for I/C, two for pump motor connections 3 Nos. (h) LED RYB indicators - 01 Set. (j) Automatic star delta starter suitable for 30 HP pump set with on / off indications with relays protection single phase prevention contractors internal wiring - 02 Nos.

S&F Automatic 15 KVAR Capacitor bank MD-XL double metalized paper extra low loss suitable for 440 V, 50 Hz system with three steps with suitable MCCB for protection including relay and other connected items and suitable size capacitor duty contractor complete with wiring all as specified and as directed.

Supply and Lay LT unarmoured PVC insulated PVC sheathed cable 1100 V grade multistranded copper conductor Single Core 16 Sqmm confirming to IS 694 from Starter to motor complete all as specified and as directed.

M&L Earthing complete for sub-station equipments with galvanized steel earth pole electrod of size 600 x 600 x 6.3mm thick burried directly in the ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below the ground level, connected to galvanized strip 32x6mm by means of nuts, bolts, check nuts and washers of galvanised or steel all as specified or shown in electrical plate No.3 of SSR-2009 (Part-I), including necessary earth work and excavatin in any strata, GI pipe 40mm dia light grade for protection of galvanised iron earthing strip upto 7.5 mtrs, including concrete chamber of PCC (1:4:8) Type D-2 (using 40mm graded stone aggregate) having copping in PCC (1:3:6) Type C-1 using 20mm graded stone aggregate. Internal surface of concrete chamber shall be plastered with 12mm thick cement mortar (1:4) and 50mm thick RCC cover in proportion (1:2:4) Type B-1 using 20mm graded stone aggregate, reinforced with 8mm dia to bar @ 80mm c/c both ways and charcoale dust common salt etc., funnel testing point with wire gauge of 22 gauge (0.63mm) 8 mesh per liner inch, including test point, testing complete all as specified and as directed.

LIGHTNING PROTECTION AND AVIATION LIGHT FOR OHT (Sch 'A' Part VIII (A)) S&F Epoxy insulators 25mm dia base with suitable screws complete for fixing AL strip if size 25 x 3.15mm complete all as specified and as directed.

S&F Aviation light LED with aluminium housing and polycabonate enclosure complete all as specified and as directed. Make: Bajaj Cat No.BGAV 302 LED product Code 110731 or Equivalent in Wipro / Philips.

S&F MCB DB SPN with suitable 6A 240 V MCB - 01 No. complete all as specified and as directed.

B.K.ASSOCIATES

Sanjay Construction Company

SAFEENA ENTERPRISES

surendra infrastructure pvt ltd

DNS CONSTRUCTION COMPANY

NIRMAL SALES CORPORATION