WELCOME MAINTENANCE, REPAIR TO SUNKEN FLOOR, WCs ETC B/R WORKS AND OTHER CERTAIN E/M WORKS AT AF STN DADRI IN AOR OF GE (AF) FARIDABAD

Amount

M&L for preparing old decorated wall surfaces , filling of holes and cracks with lime putty or plaster of paris and applying one coat of white wash on walls complete all as specified and directed by Engineer-in-Charge.

All as per item No 1 above but on ceilings complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment of walls including preparing old plaster surfaces filling of holes with plaster of paris and applying two coat of oil bound distemper over applying a coat of wall care putty on walls 1mm thick complete all as specified and directed by Engineer-in-Charge. MAKE - ASIAN / BEGER / NEROLAC

M&L prepration of old surfaces of walls filling of holes with plaster of paris and applying one coat of oil bound distemper complete all as specified and directed by Engineer-in-Charge. MAKE - ASIAN / BEGER / NEROLAC

M & L for applying one coat of wall care putty 3mm thick on wall surfaces complete all as specified and directed by Engineer-in-Charge. MAKE- BIRLA / J K LAXMI

M&L for preparation of old painted surface of steel & iron work of any description not specifically mentioned otherwise over 10cm width or girth & applying one coat of synthetic enamal paint complete all as specified and directed by Engineer-in-Charge. MAKE - ASIAN / BEGER / NEROLAC

All as per item No 06 above but on Wooden surfacescomplete all as specified and directed by Engineer-in-Charge. MAKE - ASIAN / BEGER / NEROLAC

Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and directed by Engineer-in-Charge.

Rendering, 15 mm thick, in cement mortar 1:6, over brick or concrete surfaces, finished even and smooth without using extra cement,complete all as specified and directed by Engineer-in-Charge.

Supply only integral water proofing compound conforming to IS-2645-1975 complete all as specified and directed by Engineer-in-Charge.

Rendering,15 mm thick, in cement mortar 1:4 over brick or concrete surfaces, finished fair and even without using extra cement, mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed by Engineer-in-Charge. Note:-Integral water proofing compound shall be measured and paid separately

M & L 10mm thick rendering in ceilings in CM(1:3) finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for preparing New plastered surfaces and applying two coats of distemper oil emulsion on wall surfaces including chalk whitening preparatory to distempering complete all as specified and directed by Engineer-in-Charge.

M & L preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed by Engineer-in-Charge.

M & L preparation of new plastered surfaces on ceilings & M & L for applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) and disposal of debris complete all as specified and directed by Engineer-in-Charge.

Providing screed bed or bedding layer, 15 mm thick, in cement mortar 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-Charge.

Rendering, 10 mm thick, in cement mortar 1:4, on wall surafaces, as backing coat to tiles complete all as specified and directed by Engineer-in-Charge.

Non skid ceramic coloured plain tiles,300 x 300 x 7mm thick, conforming to Group B-IIA of IS-13712, first quality, laid in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge. MAKE - SOMANY / OIRENT BELL / JOUNSON/ KAJARAI

Glazed ceramic tiles, 300 x 450 x 7mm thick, glossy finish, conforming to Group B-III of IS-13712, first quality, of approved colour, laid on vertical surfaces such as skirting or dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge. MAKE - SOMANY / OIRENT BELL / JOUNSON/ KAJARAI

M&L for Granite 20 mm thick (of any type ) (table runned and polished ) in floors steps , jamns, pillars,window-cills,cooking plateforms and vertical surfaces bedded and jointed with grey cement slurry and pointing in white ciment (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge.

Cleaning &removal all scales & dirt etc, from tanks & from mouths of circulating pipe etc exc 250 but n.exc 500 ltrs capacity complete all as specified and directed by Engineer-in-Charge.

Vitreous china squatting pan of orissa pattern, size 580 x 440 mm, white, with 'P' or 'S' trap, with integral foot rest, including demolition and removal of existing old pan all as specified and directed. MAKE - CERA / PARRYWARE / HINDWARE

S&F in repair Vitreous china wash down water closet, pedestal pattern (EWC), white, with 'P' or 'S' trap, with PVC water closet seat, black or white, closed pattern, with flat bottom and cover and mild steel chromium plated or aluminised hinging device including taking down and removal of existing old water closet with seat cover complete all as specified and directed by Engineer-in-Charge. MAKE - CERA / PARRYWARE / HINDWARE

S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets,flsh pipe, complete all as specified and directed by Engineer-in-Charge. MAKE - PARYAG / PEARL OR EQ

S&F in repair Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed by Engineer-in-Charge.

Dismantaling water tanks and removing to store exc 250 but n. exc 500 ltrs complete all as specified and directed by Engineer-in-Charge.

S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

S & F in repair Stainless steel plate rack (bartan stand) made with 4-5 mm dia stainless steel rods of minimum 750mmx250mmx750mm size complete all as specified and directed by Engineer-in-Charge.

M&L for welding repair works at small patches like hinges, door closer, window repair, steel door/gate fittings like hinge, bolts, bars etc complete all as specified and directed by Engineer-in-Charge.

S & F vitreous china wash basin, white back, size 550 X 400 mm including new waste coupling and waste pipe etc , errecting on existing CI brackets including taking down old one complete all as specified and directed by Engineer-in-Charge. MAKE - CERA / PARRYWARE / HINDWARE

S&F in repair of Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor complete all as specified and directed by Engineer-in-Charge.

S & F in repair,75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.

M&L for Demolition of Cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness(below or above ground level) complete all as specified and directed by Engineer-in-Charge.

M&L 75 mm thick cement concrete type C2 1:3:6 (40 mm graded aggregate) as in plinth protection, using extra cement for finishing complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15 mm dia bib tap cast copper alloy(fancy type), chromium plated ,'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.

Bib tap standard of PTMT 15mm any colour high pressure screwed for iron pipe and fixed.(Minimumweight15mm-90gms/20mm-125gms) complete all as specified and directed by Engineer-in-Charge.

S&F in repair, stop valve, cast copper alloy, with crutch or butterfly handle, screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair fancy type pillar tap, cast copper alloy with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 125 mm dia, chromium plated shower rose with or without swivel joints,including fixing to steelpipe or ounion of 15mm bore complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC connection 15mm size with PTMT nuts, of 450 mm length complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, grating doom 125 mm dia with waste hole of SScomplete all as specified and directed by Engineer-in-Charge.

S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed by Engineer-in-Charge.

S & F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engineer-in-Charge.

S&F PVC waste pipe, 32mm bore, 750mm long for basin, fixed in repair, complete all as specified and directed by Engineer-in-Charge.

Taking down carefully aluminium point wiring/sub main wiring light, fan socket or power complete fitting such as switches, ceiling rose, fan regulator, socket including light fitting etc complete with MS conduit and T/W battern and depositing to MES store yard complete all as specified and directed by Engineer-in-Charge.

M&L for Re wring with Modular /single core PVC insulated unsheathed 1100 volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit / cassing capping / concelled as per ground requirement medium duty ISI marked not less than 20mm dia, fixed in wall, on roof with GI saddles GI screws, rawal plugs (concealed conduit in wall wiring) with all fittings including Tee, junction boxes and provision of pressed steel terminal box of suitable size with 3 mm thick hylam laminated white sheet cover for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 volts grade cable with multistranded coper conductor of size 1.5 Sq mm (Nominal area) complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, fixed in wall, on roof with GI saddles GI screws, rawal plugs (concealed conduit in wall wiring) with all fittings including Tee, junction boxes and provision of pressed steel terminal box of suitable size with 3 mm thick hylam laminated white sheet cover for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 volts grade cable with multistranded coper conductor of size 1.5 Sq mm (Nominal area) complete all as specified and directed by Engineer-in-Chargefor following (Color coding to be followed) :- Make:- FINOLEX, GRANDLAY, HAVELLS, HPL, POLYCAB (a) One light/fan point controlled by one switch.

All as per item No 51 One socket point on same board with other switches.

All as per item No 51 One 3 pin 5 Amps socket outlet independent with cables 1.5 sqmm size

All as per item No 51 One bell/buzzer point controlled by one bell push.

All same as per item No 51 above but with conductor of size 2.5 Sq mm (nominal area) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 1.5 Sq mm PVC insulated stranded copper conductor cable complete all as specified and directed by Engineer-in-Charge. Make:- FINOLEX, GRANDLAY, HAVELLS, HPL, POLYCAB

M&L for Sub main wiring with two single core, 6 Sqmm, PVC insulated PVC unsheathed stranded FR copper conductor cable in and including PVC concealed/ surface conduit of earth wire with 1 x4 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete all as specified and directed by Engineer-in-Charge. Make:- FINOLEX, GRANDLAY, HAVELLS, HPL, POLYCAB

M&L for Sub main wiring with two single core, 4 Sqmm, PVC insulated PVC unsheathed stranded FR copper conductor cable in and including PVC concealed/ surface conduit of earth wire with 1 x 2.5 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete all as specified and directed by Engineer-in-Charge. Make:- FINOLEX, RPG, GRANDLAY, HAVELLS, HPL, POLYCAB

M&L for switch piano type 5 Amps, single pole one way complete all as specified and directed by Engineer-in-Charge. Make :- LEGRAND, CRABTREE, C&S ELECTRIC, HAVELLS, Anchor

S&F Modular switch 1 way 6A, 1 module complete all as specified and directed by Engineer-in-Charge. Make :- LEGRAND, CRABTREE, C&S ELECTRIC, HAVELLS, Anchor

M&L for switch piano type 15 Amps, single pole one way complete all as specified and directed by Engineer-in-Charge. Make :- LEGRAND, CRABTREE, C&S ELECTRIC, HAVELLS, Anchor

S&F Modular switch 1 way 16A, 1 module complete all as specified and directed by Engineer-in-Charge. Make :- LEGRAND, CRABTREE, C&S ELECTRIC, HAVELLS, Anchor

S&F Bell push 6A 1 module complete all as specified and directed by Engineer-in-Charge. Make :- LEGRAND, CRABTREE, C&S ELECTRIC, HAVELLS, Anchor

S&F Modular Bell push 6A 1 module complete all as specified and directed by Engineer-in-Charge. Make :- LEGRAND, CRABTREE, C&S ELECTRIC, HAVELLS, Anchor

M & L for socket outlet 5 pin , 5 Amps flush type complete all as specified and as directed by Engineer-in-Charge. Make :- LEGRAND, CRABTREE, C&S ELECTRIC, HAVELLS, Anchor

S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed by Engineer-in-Charge. Make :- LEGRAND, CRABTREE, C&S ELECTRIC, HAVELLS, Anchor

M&L for socket outlet 2 in 1, 3 pin, 5 and 15 Amps Flush type complete all as specified and directed by Engineer-in-Charge. Make :- LEGRAND, CRABTREE, C&S ELECTRIC, HAVELLS, Anchor

S&F Socket 6A/16A - 2/3 pin combined 2 module ccomplete all as specified and directed by Engineer-in-Charge. Make :- LEGRAND, CRABTREE, C&S ELECTRIC, HAVELLS, Anchor

S & F stepped type electronic fan regulator flush type complete all as specified and directed by Engineer-in-Charge. Make :- LEGRAND, CRABTREE, C&S ELECTRIC, HAVELLS, Anchor

S & F Fan step regulator, 120W - 2 module complete all as specified and directed by Engineer-in-Charge.

S & F in replacement lamp holder insulated body threaded deme, with back plate,button/ angular type with sutable for battern fitting complete all as specified and directed by Engineer-in-Charge.

S&F for ceiling rose surface bakelite 65x50mm two to three terminals complete all as specified and directed by Engineer-in-Charge.

S&F White cover plate with frame,1 module complete all as specified and directed by Engineer-in-Charge. Make :- LEGRAND, SEIMENS, CRABTREE,(SCHNEIDER), C&S ELECTRIC, HAVELLS,

All as per item No 72 above but but 3 module complete all as specified and directed by Engineer-in-Charge.

All as per item No 72 above but but 6 module complete all as specified and directed by Engineer-in-Charge.

All as per item No 72 above but but 8 module complete all as specified and directed by Engineer-in-Charge.

S&F Metal flush box/ PVC box 1/2 module complete all as specified and directed by Engineer-in-Charge.

All as per item No 76 above but but 3 module complete all as specified and directed by Engineer-in-Charge.

All as per item No 76 above but but 6/8 module complete all as specified and directed by Engineer-in-Charge.

S&F in repair call bell ding dong type 230 volt single phase complete set inclusive suitable size wire from ceiling rose to calling bell complete all as specified and directed by Engineer-in-Charge.

S&F Exhaust fan 10"/12" sweep complete all as specified and directed by Engineer-in-Charge. Make:- Wipro,BAJAJ,OSRAM,CROMPTON GREAVES

S&F PVC Exhaust fan 300MM sweep complete all as specified and directed by Engr - in- charge. Make:- Wipro,BAJAJ,OSRAM,CROMPTON GREAVES

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose , complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable and tubes wit suitable size complete all as specified and directed by Engineer-in-Charge. Make:- PHILIPS,BAJAJ,OSRAM,CROMPTON GREAVES

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. Make:- PHILIPS,BAJAJ,OSRAM,CROMPTON GREAVES

S & F Recess mounted LED Light Fitting 15 Watt pressure die-cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and incl separate replaceable electronic driver compatible for Analog/DALI Dimming complete all as specified and directed by Engineer-in-Charge. Make:- PHILIPS,BAJAJ,OSRAM,CROMPTON GREAVES

S&F in replacement Edgelit LED slim panel light fitting 2'x2' 40 watt having powder coated extruded Aluminium body with high quality LGP and PMMA diffuser swparate HPF driver suitbale for Armstrong and grid ceilling 6000 K , including connecting up with twin core twisted flexible copper cable with suitable size complete all as specified and directed by Engineer-in-Charge. Make:- PHILIPS,BAJAJ,OSRAM,Havells

S & F Electronic drivers suitable to fix Recessed mounted LED Light Fitting 15 Watt round shaped complete all as requred on site for smooth functioning of lights complete all as specified and directed by Engineer-in-Charge. Make:- PHILIPS,BAJAJ,OSRAM,Havells,

S & F Electronic drivers suitable to fix Recessed mounted LED Light Fitting 2'x2' 40Watt 6000 K/5400K completemake and model all as requred on site for smooth functioning of lights complete all as specified and directed by Engineer-in-Charge.

S & F MCCB 4 pole 125 Amps 16 kA complete all as specified and directed by Engineer-in-Charge. Make :- L&T, SCHNEIDER, SIEMENS,LEGRAND, HAGER, Havells

S& F Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB complete all as specified and directed by Engineer-in-Charge. Make :- L&T, SCHNEIDER, SIEMENS,LEGRAND, HAGER

S&F MCB DB double door Single pole & neutral 8 way with 200 amps rated bus bar complete all as specified and directed by Engineer-in-Charge. Make :- L&T, SCHNEIDER, LEGRAND, HAGER, Havells

S&F MCB DB double door Single pole & neutral 12 way with 200 amps rated bus bar complete all as specified and directed by Engineer-in-Charge. Make :- L&T, SCHNEIDER, LEGRAND, HAGER, Havells

Supply and fixing amp rating 240V, SP 5 To 32 AMP 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.complete all as specified and directed by Engineer-in-Charge. Make :- L&T, SCHNEIDER,LEGRAND, HAGER, Havells

Supply and fixing amp rating 240V, SPN 40 To 63 AMP 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.complete all as specified and directed by Engineer-in-Charge. Make :- L&T, SCHNEIDER, LEGRAND, HAGER, Havells

B S ENTERPRISES

36SHRI RADHEY ASSOCIATES

NAVEEN KUMAR TYAGI

M/S Yamin

MAA BHAWANI CONSTRUCTION

J P ENTERPRISES