Work of Strengthening of Base Foundation of Tail End Pulleys and bend pulleys of various Conveyor Belts in CHP, RGTPP, Khedar, Hisar

Amount

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power-driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge (50 mm average thickness)

Centring and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for sqm mass concrete

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centring, shuttering, finishing and reinforcement-All work up to plinth level: 1: 1. 5: 3 (1 cement: 1. 5 coarse sand (zone-Ill): 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centring, shuttering, finishing and reinforcement-All work up to plinth level: 1: 1.5: 3 (1 cement: 1. 5 coarse sand (zone-Ill): 3 graded stone aggregate 20 mm nominal size) for work at height of 48 to 50 meter

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centring, shuttering, finishing and reinforcement-All work up to plinth level: 1: 1.5: 3 (1 cement: 1. 5 coarse sand (zone-Ill): 3 graded stone aggregate 20 mm nominal size) for work at height of 54 to 55 meter

Providing & fixing anchor fastener of size 16mm x200 mm with Re-500 adhesive including making hole etc. and as per direction of Er-in-charge.

Providing & fixing of extra rebar 12mm dia. x 120 mm depth vertically providing extra rebar with Fischer FIS V 360 S chemical (or equivalent) including power drilling cleaning of holes then rebars should be inserted in holes that should be filled with epoxy to ensure the bond and straightening, cutting bending placing in positing in position bending with GI wire of 18 gauge complete in all respects.

Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level Cold twisted bars of 12 mm dia.

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer

Supplying and applying pre tested and approved water based concrete curing compound to concrete/ masonry surface, all as per manufacturer's specification and direction of Engineer-incharge. Non pigmented wet curing compound

RPM SOLUTION

Infinity Construction and Engineers

M/S SHIVA ENTERPRISES

TANUJ AGARWAL CONTRACTOR