Drilling of new Borewell, Motor fitting and compound repair work in Saalu marada thimmakka park Dattagalli of Mysuru City Corporation

Drilling of new Borewell, Motor fitting and compound repair work in Saalu marada thimmakka park Dattagalli of Mysuru City Corporation

001 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers - 32 A (PWD Electrical S R 2023-24, Volume-6, P-14, I No. 5.7.2)

002 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa... 1.00 Each

003 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to 13:8130-1984 and virg... 110.00 Mtr

004 Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-... 0.12 Km

005 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff - LT Cable - 2.5 to 25 Sqmm (PWD Electrical S R 2023-24, Volume-... 0.12 Km

006 Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable - Up to 4C x 50 Sqmm (PWD Electrical S R 2023-24, Volume-6, P-15, I No. 35.01)

007 HDPE/PLB Pipe 40/33 mm (PWD Electrical S R 2023-24, Volume-6, P-30, I No. 66.05)

008 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63A three phase 4 wire whole current class-1 Accuracy Energy Meter (PWD Electrical S R 2023-24, Volume-6, P-19, I No. 5.35) ... 1.00 Each

009 Fabricating, supplying and mounting MS box made out 16 SWG suitableforfloor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped w... 28000.00 Sq CM

010 Supplying and fixing angle iron framework fabricated out of M.S. angle iron. And M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. - 40 x ... 6.00 Mtr

011 Supplying, fixing, wiring,earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5m long buried in a pit .The pit should be... 1.00 No

012 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440V grade, for power factor improvement of rotating machineries like induction motor (PWD Electrical... 3.00 Kvar

013 Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin... 6.00 Mtr

014 Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin... 72.00 Mtr

015 Supply and delivery at site wrought middle steel (galvanized) GI union confirming to IS 1239-II, 1991 with latest amendments if any. - For 50 mm dia GI Union (Common SR for Water Supply & Sewerage Wor... 1.00 Each

016 Supply and delivery at site wrought middle steel (galvanized) GI plugs confirming to IS 1239-II, 1991 with latest amendments if any - For 50 mm dia GI Plugs (Common SR for Water Supply & Sewerage Work... 1.00 Each

017 Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for - For 50 mm dia GI elbow (Common SR for Water Supply & Sewerage ... 2.00 Each

018 Cutting and threading G.I. pipes for pump fitting, public fountains with appurtenances., where the length of pipe laid is less than 6 metres - Pipes of dia 32mm to 80mm (Common SR for Water Supply & S... 4.00 Each

019 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ... 50.00 Mtr

020 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ... 50.00 Mtr

021 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ... 50.00 Mtr

022 Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o... 1.00 Each

023 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m... 24.00 Mtr

024 Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi... 5.00 Each

025 Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)... 1.00 Each

026 Providing to work site Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000; 3 Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as p... 1.00 Each

027 Supply, installing, testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog... 1.00 Each

028 Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 50 mm (Common SR for Water Supply & Sewerage Works 2023-24,... 1.00 Each

029 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap... 1.00 Job

030 Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 50 mm (Common SR for Water Supply & Sewerage Works 2023-24, Volum... 1.00 Each

031 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr... 56.50 Cum

032 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour... 0.70 Cum

033 Providing Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement :3 coarse sand), finished with a floating coat of neat cement - 18mm thick (Common S.R 2023-24, Vol-2, P-59, I.No... 3.50 Cum

034 Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. (Common S.R 2023-24, Vol 2, P-187, I.N... 2.25 Cum

035 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of En... 17.55 Cum

036 Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not excee... 35.10 Cum

037 Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kankar/Moorum.

(Tipper 5.5 m3) (Common S.R 2023-24, Vol-3,P-05, I.No-1.1 A)

038 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS... 8.78 Cum

039 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (Common S.R 2023-24, Vol 2, P-9, I.No.5.4)

040 Providing and constructing Size Stone/Coursed/ uncoursed rubble stone masonry in CM 1 : 5 proportion using available stones including cost of all materials, machinery, labour, forming weep holes at sp... 12.29 Cum

041 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s... 104.00 Sqm

042 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smo... 35.75 Sqm

043 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T... 3.03 Cum

044 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et... 400.00 Kg