GE/CHM-52/2022-2023 REPAIR TO SECURITY / COMPOUND WALL, GATE, SECURITY FENCING OF MARRIED ACCN IN THE AOR OF AGE B/R III AT CHANDIMANDIR

Amount

Dismantling of posts or struts of RCC/wood/steel any section incl taking out embedded portion and making good disturbed portion, (posts embedded in concrete or in hard core) complete all as specified and directed

Dismantling wrought iron or mild steel as in gates, grills, posts etc or in any description not otherwise provided for, complete all as specified and directed

Galvanized, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. as directed (each line of wire to be measured) fixed as in repair complete all as specified and directed.

Mild steel work as in iron post / posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-W (Gde.E-250)quality-A or Fe 290 (Gde -E-165) complete all as specified and directed.

Mild steel screw bolt (machine made) with hexagonal at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal exc 5cm but n.xc 10cm long, diameter of shank 5 to 10mm, complete all as specified and directed.

Mild steel round bars 10mm dia and over, cut to length fixed in chain link fencing complete all as specified.

Rolled sections as in main and cross beams, hip and jack rafters,purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates, conforming to Fe-290 Gde E165, all as specified and directed.

Framed work such as grills, grating, framed guard bars, walk ways, railings etc. using steel conforming to Fe-290-O , Gde E-165 fixed complete all as specified and directed.

Refixing only mild steel framed work as in gates including pintle hinges, stops, hand made sliding bolts etc for ornamental and intricate design, including necessary welding work complete all as specified and directed. NOTE : Qty obtained from demolition to be reused

Dismantlng fencing wire mesh any type complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

Supply only chain link fencing of n.exc 4.00 mm dia galvanized steel wire, size of mesh as approved complete all as specified and directed. Note : (i) Fixing included under item No 18 here-in-before. (ii) Unit weight (weight per sqm) of chain link fencing shall be derived as per site through a BOO appointed by GE in presence of Contractor's authorised rep and shall be kept in record.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges, all as directed.

2mm thick fibre glass reinforced translucent plain coloured sheeting with side lap, fixed with coach screw and washer as in roof, wall , fencing etc complete all as specified and directed.

Pre-painted galvalume aluminium zinc (AZ-70) coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.

Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified & directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed ,complete all as specified and directed.

15mm thick rendering in cement mortar 1:4 on brick walls or concrete surface and finished fair and even without using extra cement complete all as specified & directed.

Preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness (below or above ground) complete all as specified.

Desilting the drains not exc 50 cm in cross section, removal of mud, removing the grass, vegetation, shrubs etc from drain and removing the excavated soil to a distance n.exc 50 metre and depositing where difrected at a level not exceeding 1.5 metre above the starting point complete all as specified & directed.

Supply and fix concrete interlocking pre polished paver block, with grey cement and pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over and including 25mm thick sand cushioning, with grey cement and no pigment (in top layer), taking out old paver blocks , complete all as specified and directed. Notes: The shape/size of paver blocks shall be as approved by the GE.

Factory made glazed / polished chequered cement concrete tiles 300mm x 300mm x 25mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:6, fixed as in repairs complete all as specified and directed.

Coloured non skid porcelain tiles exterior grade 300x300x9-10mm thick heavy duty (Endura from Johnson or equivalent) as in floor, set and jointed in neat slurry and pointed in coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in cement mortar 1:6, including taking out of old tiles, complete all as specified and directed by Engineer-in-charge.

Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.

Plain cement concrete 75mm thick , 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base, complete all as specified & directed.

50mm thick PCC 1:3:6 type B-1 (using 20m graded crushed stone aggregate) as in flooring including brooming, spike rolling to surfaces or making impressions of expanded metal while the concrete is green, including making panels with PVC strips in squares not exc. 2 metres on each side, complete all as specified and directed.

Plain cement concrete 1:2:4 type B-0 using 12.5mm graded aggregate as in roof kerb stone or mud stops cast in situ and rounded or chamfered on edges and similar work, complete all as specified & directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillar etc including disposal of demolished material complete all as specified and directed.

Brick work with sub class ‘B’ bricks of class designation 10 (min. compressive strength 100Kg/sqcm) old size bricks, straight or curved on plan to any radius, in half brick thick walls built in cement mortar 1:6, complete all as specified & directed.

Brick work with sub class ‘B’ bricks of class designation 10 (min. compressive strength 100Kg/sqcm) old size bricks, straight or curved on plan to any radius, in half brick thick walls built in cement mortar 1:4, complete all as specified & directed.

Plain cement concrete type C-1 (1:3:6) using 20mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fast, plinth courses and the like finished fair & even, including necessary formwork complete all as specified.

Complete removal of existing treatment of any type / description viz distemper, white wash etc from existing plastered / unplastered surface of bldg with mechanical means / grinder completely and applying two coats of wheather proof exterior emulsion paint on existing plastered or unplastered surface of building over one coat of exterior wall primer (all as per manufactures instructions) with and including necessary scafolding and safety arrangements complete all as specified and directed.

Providing precast cement concrete louvers and jallies, 35mm thick (measured solid) type B0 (12.5mm aggregate) set in cement mortar (1:4), including all mouldings and demolition of old jalli ,all as specified.

Applying wall care putty in new external surfaces of bldg (average thickness 1mm as required for desired smoothness and leveling of surfaces in two or more layers) by using necessary scafolding and safety arrangements including sand papering after filling the putty to make surface smooth and ready to receiving exterior painting and applying two coats of wheather proof exterior emulsion paint over one coat of exterior wall primercomplete all as specified and directed.

MS GURENDER SINGH

Premier Constructions

M/S Dhanpati Construction

VRIDHI ENTERPRISES