Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹29.1 L+₹42,023 (1.46%)Rejected-Finance | L2 | Rejected-Finance Other than lowest. | |
| 3 | L3₹29.5 L+₹76,843 (2.68%)Rejected-Finance NEAR RAILWAY CROSSING ADAMPUR DOABA JALANDHAR JALANDHAR PUNJAB 144103 | JALANDHAR | PUNJAB | 144103 | L3 | Rejected-Finance Other than lowest. |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
13 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Adampur
Military Engineer Services AF Station Adampur 144103
MISC REPAIR / IMPROVEMENT TO E/M INSTALLATION AT AF STN ADAMPUR
2022_MES_570033_1
GE/AF/ADM-45/2022-23
Open Tender
Civil Works
Item Rate
180 days
Under GE AF Adampur
Refer NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE AF Adampur
₹60,000
Yes
6 Feb 2023
19 Dec 2022
14 Jan 2023
19 Dec 2022
13 Jan 2023
31 Dec 2022
20 Dec 2022 - 30 Dec 2022
Amount
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in SOFT/LOOSE soil complete, all as specified.
PCC type C-2 (1:3:6), using 40 mm graded stone aggregates as in filling & mass concrete, sub base, complete all as specified.
Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in bed block of hold fast, coping including necessary form work etc complete all as specified.
Reinforced cement concrete (1:1½:3) type A-1 (nominal mix) using 20mm graded stone aggregates as in as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.
Brick work using bricks as specified in PS clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified.
Cutting chases pinning using mechenical means electric cutter in making good to facing where required for concealed water tubing in brick walls cutting n.exc 10 cm girth. complete all as specified.
Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) with fair finished surfaces of concrete, complete all as specified.
Factory made 35 mm thick ,2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all all as specified.
Factory made, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30 mm thick, ISI marked, complete all as specified.
Factory made solid PVC Door frame of size 50mm x 47mm made out of 5mm thick wood grain colour PVC sheet reinforced with mild steel square tube, suppling & fixing in opening, complete all as specified.
Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded wood grain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and wood grain colour PVC sheet for top rail, lock rail and bottom rail, panelling of wood grain colour PVC sheet to be fitted in the MS frame welded / sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement as specified in SSR Part II, complete all all as specified.
Aluminium anodised barrel tower bolt of extruded section 150mm long, ISI marked, complete all as specified.
Stainless steel butt hinges100mm long, ISI marked, complete all as specified.
Stainless steel butt hinges 75 mm long, ISI marked, complete all as specified.
Extruded aluminium anodised handles fabricated type with plate 125 mm long, ISI marked complete all as specified.
Aluminium alloy, anodised, ISI marked sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 250mm long, IN REPLACEMENT, complete all as specified.
Mild steel helical door spring 300mm, ordinary rat tail rod pattern including roller and roller plate ISI marked, complete all as specified.
Double leg aluminium anodised door stopper with rubber foot, ISI marked and fixed with steel screws to bottom rail of doors complete all as specified.
Galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples, IN REPAIRS, complete all as specified.
Steel rolling shutter (curtain made of 1mm thick mild steel sheet) with ball bearing, as specified including top cover, anchoring rod, hasp and staple, guide chennels, strike plate etc and one shop coat of primer erected in position as indicated push pull or manual type, thickness of laths 1mm, including taking down carefully existing old rolling shutter complete all as specified of size/area exceeding 6 Sq.m each shutter.
Mild steel works in hand rails, half round or other stock section or core for wooden handrail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) in-cluding all necessary drilling, bolting or riveting, etc., confirming to Fe-290-Gde E-165, complete all as specified.
Framed mild steel work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290-Gde E-165, complete all as specified. NOTE: Grill shall be factory fabricated and supplied duly welded to window frame with shop coat of red oxide primer.
Rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, complete all as specified.
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
Pressed steel frames made out mild steel sheet 1.25 mm thick, for doors with one or more rebates including necessary fixing lugs, 100 mm size butt hinges ISI Marked, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC (1:3:6) type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified for size of frame: -
105 mm x 60 mm
125 mm x 60 mm
Factory made steel windows with side hung shutter with glazing bars each shutter having 02 No. box type hinges & two nos. tower bolts of size not less than 150 mm size and peg stays, dovetailed or welded, including one shop coat of zink chromate primer complete.
Factory made steel windows with side hung shutter without glazing bars each shutter having 02 No. box type hinges & two nos. tower bolts of size not less than 150 mm size and peg stays, dovetailed or welded, including one shop coat of zink chromate primer complete.
Steel windows or ventilators, fixed type including one shop coat of zink chromate primer complete.
NOTES APPLICABLE TO SERIAL ITEM NO. 26 TO 28: Profile section used under these items shall be 'P' tube as shown in drawing No. CE/AF/STD-170/07, CE/AF/STD-171/07 and CE/AF/STD-172/07 as applicable.
Solid PVC wall lining consisting of 5mm thick wood grain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame, PVC strip etc fixing as wall panelling up to ceiling level all included as per specification SSR part-I complete all as specified.
5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on wall to make PVC frame as per specification SSR part-I complete all as specified.
Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including 6 mm dia. GI hangers (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and 40 mm long 12.5 mm dia expansion hold fasteners with and including 12 mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete complete.
Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of any colour hving tensile strength of 550 Mpa as in roof coverng/cladding to wall, fixed with self tapping screws, complete all as specified.
Water Proofing Treatment to RCC roofs comprising of : -
Taking down existing water proofing treatment (any no. of layers) from RCC roofs with brick tile including cleaning the surface including flashings and junction of parapet etc. with wire brushing & water to the entire satisfaction of EIC, complete all as specified.
PCC (1:2:4) type B-1 using 20 mm graded stone aggregate, laid to slope as directed by Engineer in Charge over RCC roofs as padding, complete all as specified.
Rendering 15 mm thick (Average thickness) rendering on roof surface including flashings and junction of parapets etc., finished even and fair in cement mortar (1:4), using water proofing compound as recommended by manufacturers after brushing cement slurry @ 1.20 kg/Sq. m, complete all as specified. NOTE: Supply only WPC will be measured & paid for separately under respective item of BoQ.
APP based polymeric membrane laid on primed roofs & flashing by forced application using Butane torch and sealing all joints on primed surface by applying hot blown industrial grade bitumen @ 85/25 @ 1.20 kg/Sq.m over a coat of bitumenous primer @ 0.40 litre per square metre over clean RCC/plastered roof surfaces & flashings complete, all as specified.
40 mm thick brick tiles are bedded over 15 mm thick cement mortar (1:4), and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on APP membrane complete all as specified.
40 mm thick brick tiles (Except Tiles) are bedded over 15 mm thick cement mortar (1:4), and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on APP membrane complete all as specified.
Making benching with PCC (1:2:4) type B-0 (using water proofing compound) along side walls adjoining to roofs, in CONCAVE SHAPE, complete all as specified. NOTE: WPC will be measured and paid for separately under respective item of BoQ.
NOTES: (a) Supply only WPC will be measured and paid for separately under respective item of BoQ. (b) For Guarantee of Water Proofing Treatment refer PS clause 11.5 of CA.
Supply only water proofing compound (WPC), ISI marked, complete all as specified.
25 mm thick, cement concrete type B-0, 1:2:4 using 12.5 mm graded stone aggregate, finished rough, as in sub floors or similar locations, complete all as specified.
75 mm thick, cement concrete type C-1, 1:3:6 using 20 mm graded stone aggregate, finished even & smooth without using extra cement, as in plinth protection, and joints shall be sealed with joint sealing comound grade 'A' complete all as specified.
75 mm thick, cement concrete type D-2, 1:4:8 using 40 mm graded stone aggregate, finished even & rough, as in sub floors, complete all as specified.
Machine cut Kota stone slab flooring 18-22 mm thick, area of each slab not less than 0.30 sq.m, (cut to size in square shape) laid in floors over & including 20 mm thick (average thickness) cement mortar (1:4) screed and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing (Granite finish) complete, all as specified.
Kota stone slab 18-22 cm thick on vertical surfaces like riser of steps, skirting, dado and pillar laid over & including 10 mm thick (average thickness) cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (Granite finish), complete all as specified.
Glazed ceramic coloured tiles 7mm thick, area of each tile exc. 0.17 Sq.m but n. exc. 0.19 Sq.m, on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in grout of shade matching to tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified.
Non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.11 Sq.m but n. exc. 0.18 Sq.m, laid in floors etc, set and jointed in neat cement slurry and pointed in grout of shade matching to tile laid over and including 15 mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement complete all as specified.
First quality, Vitrified ceramic coloured tiles 10 mm thick, of size 600mm x 600 mm, laid in floors etc, set and jointed in neat cement slurry and pointed in grout of matching shade, laid over and including 15 mm thick bedding layer in cement mortar (1:4), including necessary cutting as per site requirement complete, all as specified.
First quality, Vitrified ceramic coloured tiles 10 mm thick, of size 600mm x 600 mm, on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in grout of matching shade, laid over and including 10mm thick rendering in cement mortar (1:4), including necessary cutting as per site requirement complete, all as specified.
Factory made, machine pressed precast concrete interlocking paver block any shape and size approved by EIC, ISI marked (IS:15658-2006) of 60 mm thick, M-35 grade, with grey cement & pigment, laid dry in paths/roads over and including 25 mm consolidated thickness dry fine sand, complete all as specified.
Factory made, machine pressed precast concrete interlocking paver block any shape and size approved by EIC, ISI marked (IS:15658-2006) of 80 mm thick, M-40 grade, with grey cement & pigment, laid dry in paths/roads over and including 25 mm consolidated thickness dry fine sand, complete all as specified.
Rendering 5 mm thick on fair faces of concrete surfaces, finished fair and even on ceiling surfaces in cement mortar (1:3), complete all as specified.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:6) complete all as specified.
NOTE APPLICABLE FOR SERIAL ITEM 40 to 47: The contractor will remove all electric fittings / board coming across the work before starting tile & plastering work in the building and re-fix the same after done.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), mixed with water proofing compound as per manufacturers instructions, complete all as specified.
Three coats of white washing on new plastered ceiling surfaces, including preparation of surfaces, complete all as specified.
Two coats of cement base paint on new plastered wall surfaces, including preparation of surfaces, complete all as specified.
Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats & smoothening the surfaces as specified. (preparatory to paint as directed). (b) Two coats of interior acrylic distemper/oil bound distemper over and including a coat of interior primer
Sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5 Sq.m in each pane complete all as specified.
Sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5 Sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden/ metal frame including punching or drilling out old glazing pins/spring clips complete all as specified.
Two coats of synthetic enamel paint over & including a coat of pink primer over wood and wood (new) based surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces complete all as specified.
Two coats of synthetic enamel paint over & including a coat of red oxide primer over steel & iron (new) surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified.
Steel tubes ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors, including taking up or down steel tubing and connections from existing location, complete all as specified of size: -
15mm bore
20mm bore
500 litre capacity, white, three layered polyethylene water storage tanks (cylindrical vertical with closed top) including hoisted and fixed in position, making connections, IN-REPAIRS, complete all as specified including the following acessories: - (i) Brass ball valves, high pressure, with GI rod & high density plastic ball complete screwed for iron pipe or brass ferrule and fixed, suitable for 20 mm bore GI pipe, IN REPAIRS, complete all as specified. (iii) Gun-metal stop valve (quarter turn type) with MS lever handle, suitable for GI tubes 20 mm bore, ISI marked, screwed both ends for iron pipe, IN REPAIRS, complete all as specified. (iv) Provn of 20 mm bore GI light grade tube from O/H tank to nearest mouth of RWP.
Angular stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. MAKE: PRAYAG Cat No. P6810 or equivalent make mentioned in Appndix 'B'..
Bib tap, cast copper alloy, chromium plated fancy type, long body with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. MAKE: PRAYAG Cat No. P6808 or equivalent make mentioned in Appndix 'B'.
Pillar cock, swan neck type, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR, complete. MAKE: PRAYAG Cat No. P6814 or equivalent make mentioned in Appndix 'B'
PVC connections 15 mm size of length 450 mm with PTMT nuts, IN REPAIRS complete all as specified.
Peg set of six fixed in position with PVC rawl plugs & SS screw complete. MAKE: PRAYAG Cat No.BEA-30 or equivalent make mentioned in Appndix 'B'.
Grating doom 100 mm size of PTMT, IN REPAIR, complete all as specified.
Vitreous china wash down water closet pan (pedestal pattern), ISI marked, white with uPVC 'S' trap of size 540x365x390 mm with & including ISI marked PVC seat & cover & SS jet spray (L bend) with 1metre long braided tube IN REPAIRS, complete all as specified. MAKE: PRAYAG Cat No. 4016 or equivalent make mentioned in Appndix 'B'.
Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, ISI marked, white, with integral foot rests (excluding flushing cistern and flush pipe), IN REPAIRS, complete all as specified.
PVC flushing cistern 10 litre capacity, dual flush syphonic action type, any shade, with side handle, ISI marked (IS: 7231) with flush pipe and all fixing arrangements, IN REPAIRS, complete all as specified. MAKE: PRAYAG Cat No. 502 or equivalent make mentioned in Appndix 'B'.
Vitreous China wash hand basin, white, flat back, size 550 x 400 mm ISI marked, complete all as specified. including fixing acessories like rag bolts etc. with PTMT waste coupling half or full threaded suitable for & including 32 mm size PVC discharge pipe, IN REPAIRS, complete.
uPVC pipes, type-B, ISI marked (IS:13592) single socketed in any length with rubber ring joints, fixed under floors / fixed to wall as SWR pipes, IN REPAIR, complete all as specified of size: -
75 mm bore
110 mm bore
uPVC/PVC bends any radius, complete all as specified. suitable for uPVC soil waste discharge pipes, IN REPAIR, of size: -
75 mm bore
110 mm bore
uPVC / PVC 75 mm bore floor trap including jointing with solvent and embedding in cement concrete type B-1 (1:2:4), IN REPAIR, complete all as specified of size: -
Taking down cement plaster of any description on brick walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sq.m each and removing from site all as specified.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sq.m but not exceeding 4.00 Sq.m each and removing from site all as specified.
Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening after easing adjusting and minor REPAIRS complete all as specified.
Dismantling floor, hearth or wall tiling, stone slabs including cement mortar bedding and removing rubbish off the premises complete all as specified.
Demolition brickwork or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified.
Demolition of cement concrete (unreinforced) in ground floors and pavings not excceding 15cm thickness (above or below ground level) all as specified
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided all as specified.
Dismantling wrought iron or mild steel work of any description, complete all as specified.
Dismantlig boarding any description and fixed in any position with nails all as specified.
Dismantling timbre scantling 40 sq. cm and over in section, in any position, complete all as specified.
Dismantling asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings, complete all as specified.
NOTE: Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline.
PRATHAM TRADERS
M/S GURBACHAN SINGH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .