SET OF STAINLESS STEEL FITTING FOR SAND EJECTOR AND SANDBOX AS PER CLW SPECN NO CLW/MS/3/053 . EACH SET CONSISTING FOLLOWING ITEMS. (1) UNION TEE 10 MM OD-01 NO (2) MALE ELBOW CONNECTOR 10 MM OD 3/8 BSPT(M)-01 NO.

Special Eligibility Criteria

1. 1

   A] The firms/makes approved by CLW [Item ID 2100120] are eligible for bulk quantity order. The approval status of the firm for the said item will be reckoned as on the date of tender opening and not thereafter. But, in case of downgrading/removal /suspension/banning etc. after opening of tender,such changes shall be taken into account while considering the offers. Bidders should submit documentary evidence failing which offer is liable to be ignored. [B] Bulk purchase [minimum 80 percent of net procurement quantity] will be made from those sources who are on the approved panel list. The offers from developmental vendors may be considered for developmental orders limited to the extent of up to 20% of the net procurement quantity. In cases, where the rates received from unapproved sources are lower than those applicable to approved sources and where the unapproved source are having potential for supply of quality material and are having infrastructure of plant and machinery and testing equipment, in such cases unapproved sources may also be considered for placement of developmental order for up to 20% of the net procurement quantity. Total developmental order quantity shall be limited up to 20% of Net Procurement Quantity in regular tenders. [C] If considered essential, placement of development orders can also be considered on Developmental/Unapproved vendors whose rates are higher than the rates available form approved sources. [D] Preferably manufacturers should participate. Participating traders/agents must provide authorization letter issued by the OEM. Authorization letter should preferably be tender specific. In case of general authorization letter, it must clearly indicate the validity period/expiry date. Offers with general authorization letter silent on validity period/expiry date will not be considered for placement of order and that offer is liable to be ignored.Bidders must submit authorization letter along with their offer failing which the offer is liable to be ignored. is liable to be ignored.

   Document optional
2. 2

   Where there are not more than three Indian suppliers categorized as approved vendor for a particular item, developmental vendors can be considered for placement of bulk order without any quantity restrictions. A supplier shall be considered as Indian supplier if [i] The entity is incorporated in India, or [ii] A majority of its shareholding or effective control of the entity is exercised from India, or [iii] More than 50% of the value of the item being supplied has been added in India

   Document optional
3. 3

   In cases where cartel formation by the approved sources is suspected or the rates available from approved sources are adjudged unreasonably high, the purchaser reserves the right to place orders on deserving firms outside the approved vendor list, without any restrictions.

   Document optional

Commercial-Compliance

1. 1

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
2. 2

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

Other Conditions

1. 1

   INSPECTION BY CONSIGNEE
2. 2

   The conditions of inspection to be governed by the attached bid document with the tender.
3. 3

   Bidders must note that for offers having vague delivery schedule like - as per your requirements- or any time delivery- or indefinite like -02 to 12 months- or like - 06 to 08 months- etc, delivery period while issuing the contract shall be given as per the requirement best suited to this office within the quoted range. No further claim by the bidder shall be admissible in such cases.
4. 4

   By default your offer shall be considered as valid for 90 days from the date of tender opening. Also, the delivery period shall be reckoned from the date of issue of advance PO/Letter of Advance Acceptance/Letter of Acceptance. This is a mandatory requirement and no deviations to this will be permitted or considered while consideration of the offer. Bidders not willing to accept this condition must not submit the offer. Bids if submitted shall be considered as deemed acceptance of this condition. Any deviation regarding this or remarks for not agreeing to this condition, offered in the deviation column or anywhere including in uploaded document will not be accepted or considered while consideration of the offer. The purchaser may, at his discretion ignore any such deviation, if quoted, while issuing the contract. No further claim by the bidder shall be admissible in such cases.
5. 5

   Bidders to indicate the HSN code of the tendered item along with their GST registration number in the remarks column.

   Confirmation required
6. 6

   Whether statutory variation clause is acceptable to bidder?

   Confirmation required
7. 7

   MSEs registered under Udyam Registration are only eligible to avail the benefits under the Public Procurement Policy for MSE.
8. 8

   For orders placed on dealers/traders/agents, documents certifying that the material is sourced from the OEM/OEM authorised dealer will have to be produced by the firm at the time of delivery.
9. 9

   NORTH EASTERN RAILWAY, GORAKHPUR BID DOCUMENT VER.47.0 IS APPLICABLE.

   Confirmation required

1. 1

   Bid Securing Declaration [Applicable only for bidders availing exemption from submission of EMD]-I/we certify that my/our offer is eligible for exemption from submission of bid security/ Earnest Money Deposit, in terms of the tender conditions. In case my/our claim to exemption from submission of bid security/ Earnest Money Deposit is not found valid as per terms of the tender, I/we understand and accept that Railways has unquestionable right to summarily reject my bid and my offer shall not be considered for ordering. Further, I/we hereby understand and accept that if I/ we withdraw or modify my/ our bids during the period of validity, or if I/ we are awarded the contract and on being called upon to submit the performance security/ Security Deposit, fail to submit the performance security/ Security Deposit before the deadline defined in the request for bid document/ Notice Inviting Tender, I/ we shall be debarred from exemption of submitting Bid Security/ Earnest Money Deposit and performance security/ Security Deposit for a period of 6 [six] months, from the date I/ we are declared disqualified from exemption from submission of EMD/SD, for all tenders for procurement of goods issued by any unit of Indian Railways published during this period.

2. 2

   If the Contractor, having been called upon by the Purchaser to furnish security deposit, fails to make a security deposit within the specified period, it shall be lawful for the Purchaser to cancel the Letter of Award and to recover from the Contractor the amount of such security deposit by deducting the amount from the pending bills of the Contractor under any other contract with the Purchaser or the Government or any person contracting through the Purchaser or otherwise howsoever, duly adjusting the Earnest Money deposit, if any, made by the contractor.