Special Govt. Girls hostel Bharmour Tehsil Bharmour Distt. Chamba SH Providing and laying Tile work and sanitary work

Amount

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. including entire carriage of materials within all leads, lifts and other incidentals.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings as per Architectural drawing and the like within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement isto Four sand isto Eight graded broken/crushed stone aggregate 40mm (Forty milimetres ) nominal size and down gauge) mechanically mixed and curing complete excluding cost of forms work in foundation and plinth within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size)incidentals.as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing Tor steel reinforcement of Sail / Tisco for reinforced cement concrete work including bending, binding, straighting, cutting and placing in position complete including cost of binding wires complete for all floors within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc, wherever necessary complete. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

White glazed tiles 6mm (six millimetre) thick in skirting rises of steps and 12mm (twelve millimetre) thick cement motor 1:3 (one cement isto three sand) and jointed with the cement slury within all leads, lifts of materials and other incidentals, as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge . The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duey vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. as directed by the Engineer-in-Charge . The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government

15mm (Fifteen milimetres) thick cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Finishing wall with nerolac surakha ( two coats) plastic enterior/ apex emulsion paint of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign mater and also including preparing smootgh including applying of putty as required for making the surface complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government

Steel work welded in built up sections joists channels, angles, tees with connection plates or angles, cleat as in trusses, trussed purlins main and cross beams, hips jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and; placing in position complete and applying a coat of red lead paint within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and placing water tank make P.V.C. SINTEX having capacity of 1000 (One thousand ) liters each tank with necessary fittings including over flow pipe scour pipe etcetera and pads required for in let and out let ball valve with cover and locking arrangements complete in all respect including carriage of material, within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass angle valve 15mm without Nuts and pipe.as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm nominal bore brass full way valve with wheel complete in all respect.as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

providing and fixing 15mm nominal bore polythene aluminium polythene (PL-AL-PE) composite pressure pipe UV stabilized with carbon black confirming to IS 15440-2004 for water supply including cutting chase and making good the walls etcetera (Internal works) pipe concealed in walls cutting chase and making goods the same, within all leads, lifts of materials and other incidentals. .as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres diametres C.P. Grating Jal/Jaguar or equivalent (Heavy duty makes ISI marked is No. 8931 & 8934) for gully floor or Nahni trap within all leads, lifts of materials and other incidentals .as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore chromium plated brass ISI marked No. 8934) bib tap E 58 (Eighty eight) Jal/Jaguar or equivalent , within all leads, lifts of materials and other as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110x75mm (One hundred ten into seventy five millimetres) nominal size/diameter P.V.C. Supreme/ Kishan/ Astral or equivalent floor trap ISI marked of self cleaning design including with approved adhesive cost of cutting and making good walls and floors complete, within all leads, lifts of materials and other incidentals as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing P.V.C. Supreme/ Kishan/ Astral or equivalent Collar complete, within all leads, lifts of materials and other incidentals as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete. as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 110 MMas directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing IS marked big size No. 2071 Cera in white colour vitreous china water closet squatting pan (Orrisa type W.C. pan) size 58x44cm (fifty eight into forty four centimetres) orissa pattern (earth work, bed concrete, foot rest and trap to be measured and paid for separately) STAR S HINDWARE 390x350x570mm (Three hundred Ninety into Three hundred fifty into Five Hundred Seventy milimetres) within all leads, lifts of materials and other incidentals as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing W.C. Of Matrix of Hindware /Cera/ Jaquar of star white / snow white shade vitreous china wash down closet (European type W.C. pan) with internal P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement isto one sand) (seat and cover to be measured and paid for separately) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 10.00 Ltrs (Ten litres) capacity PVC low level flushing cistern Item No 502 IS marked No. 7231 with a pair of C.I. or M.S. brackets with fittings such as lead valve less siphon, 15mm (Fifteen milimetres) nominal size brass ball valve with polythene float, C.P. brass handles, unions and couplings for connection with inlet, outlet and over flow pipe, 40mm (Forty milimetres) diametres C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) within all leads, lifts of materials and other incidentals as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing plastic seat (solid / Holow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing G.I. Inlet connection for flush pipe with W.C pan. as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash basin I.S. no. 1025 Cera / Hindware or equivalent 55x40x80cm (Fifty five into forty into eighty centimetres) with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same with pedestal but excluding fittings within all leads, lifts of materials and other incidentalsas directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing flat back 600x450mm beveled edge mirror or superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass and screws and washers. directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass Jal/Jaguar or equivalent toilet paper holder (Heavy duty make ISI marked NO-8931 & 8934 directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing C.P. jet spray of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal of approved quality and colour with one metre tube within all leads, lifts of materials and other incidentals and directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) diameters C.P. brass pillar tap with capstan bead Jal/Jaguar or equivalent within all leads, lifts of materials and other incidentals directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government

Providing and fixing PVC waste pipe for wash basin, sink including check nut within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government

Providing and fixing 150mm (one hundred fify millimetres) nominal bore/diameters to level or slopes PVC pipe for sewerage line including joint with approved adhesive mixture as directed by the Engineer-in-Charge. directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government

Providing and fixing PVC connection pipe with brass unions 45cm long 15mm nominal bore.as directed by the Engineer-in-Charge. directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government

Providing and fixing GYSER 25 LITRE CAPACITY 2000 watts.as directed by the Engineer-in-Charge. directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government

Painting two coats(excluding priming coat)on new steel and other metal surfaces with enamel paint brushing to give an any shade including cleaning the surfaces of all dirt, dust and other foreign matters-enamel paint white within all leads, lifts of materials and other incidentalsas directed by the Engineer-in-Charge. directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government

Tilak Raj

ROHIT KASHYAP

Inder Singh

Purushotam kumar

suman kumar thakur