Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹92.4 LAdmitted-Finance B 16 SHREEJI NAGAR DURGAPURA JAIPUR RAJASTHAN 302018 | JAIPUR | RAJASTHAN | 302018 | -7.00% | ₹92.4 L | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | SHUBHAM ELECTRICALS AND MAINTENANCE L1 |
|---|---|---|---|---|
| 1.00Passenger Lift | ||||
| 1.01Supplying ,installation , Testing and commissioning of the Passenger Elevator , Machine Room Less having following main features: | ||||
| 1.02(a)MOTOR : Gearless lift drive comprising of high starting torque lift duty, 3 phase 440 Volts A.C. permanent magnetic synchronous motor of proper rating with high efficiency shall be used. | ||||
| 1.03(b) Operation / Drive : Microcessor based /PLC, AC Variable Voltage variable frequency variable speed (V3F) vector control drive with encoder feedback closed loop system shall be used for lift car and door operation which shall be full collective selective operation hall call demand response, UP/Down hall stops , main , Up/Down contactor with overload and phase reversal relay and safety controls | ||||
| 1.04( c ) Traction Media: main hoist flat coated steel belt / rope . Thimbles of spring permit adjustment of uniform tension for smooth operation of the elevator Pulse belt monitoring system to avoid the cut in the belt. | ||||
| 1.05(d) Car : car should be with M S platform with bracings of adquate size and to sustain the impact load cabin plus passengers with safety factor of fire for steel with Granite flooring and side panels should be of Stainless steel with Honeycomb/Moonrock Finish of sheet of grade 304 duty with S.S. handrails . Car ceiling shall be steel finish with aesthetic appearances with LED ceiling lights .The size of the car shall be taken as per available lift well size and relevant BIS code of lifts . Car panel will also be of SS 304 grade finished with emergency stop device , emergency alarm,mechanical door safety device ,full length infra-red curtain in car door , facility of auto/attended mode. All car panel buttons and all floor switches must be with brail language as per lift act. The inspection unit shall be provided at the top of the car. | ||||
| 1.06(e)tanding Doors : All landing door shall be fully automatic centre opening / telescopic made of Honeycomb/Moonrock finish stainless steel grade 304 with key holes and infrared curtains with unlocking facility from outside. | ||||
| 1.07(f) Emergency light: Appropriate rechargeable battery operated LED emergency light in the car and along with alarm switch shall be provided. | ||||
| 1.08(g) ARD: Automatic rescue Device (ARD) shall be provided according to passenger capacity with SMF batteries of approved brands as per BSR. | ||||
| 1.09(h) Audio-Visual lndication : Audio visual indication in the lift car , showing over loading such that doors kept open till excess load is removed. | ||||
Tender Value
₹85 L
EMD Value
₹1.7 L
Closing Date
19 Aug 2026, 6:00 pmClosed
Executive Engineer M and H, Dn. 2 Jaipur
Executive Engineer M and H, Dn. 2 Jaipur
SITC of Lift work in SDH Degana, Distt Nagaur.
2026_MEDIC_583645_5
NIT No.12/2026-27EEM and HDiv 2 Jaipur/
Open Tender
Electrical Works
Percentage
365 days
Degana Nagaur
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,000
RTGS/NEFT/Any other money Transfer System
₹1.7 L
19 Sept 2026
7 Aug 2026
20 Aug 2026
7 Aug 2026
19 Aug 2026
7 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 0.01 | Part B BSR ITEM Based on BSR 2022 | - | - | - | - |
| 1Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR | |||||
| 1.01 | 16.0 Sq. mm 4 core | 200 | per Mtr | 232 | ₹46,400 |
| 2Supplying and making one end termination with Nickel plated heavy duty brass single compression gland (as per IS 12943-1990)) SIBG type consisting of Check Nut, Gland Body, Metal Washer(3 Nos.), Outer Seal Rubber Ring, Compression Nut, heavy duty aluminium lugs (as per IS 8309 -1993) duly crimped with crimping tool, PVC tape as per IS 8337-1976 of following size of PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . | |||||
| 2.01 | 4 x 16.0 sq.mm | 8 | set | 189 | ₹1,512 |
| 3Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR | |||||
| 3.01 | a) Short point (up to 3 mtr.) | 10 | P.Point | 359 | ₹3,590 |
| 3.02 | b) Medium point (up to 6 mtr.) | 10 | P.Point | 578 | ₹5,780 |
| 4Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's ISI marked (IS:3419- 1988)accessories, Hot Dipped Galvanized Modular box of 1.2 mmthick with earth terminal, 10 A modular switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR | |||||
| 4.01 | On board | 20 | p.Point | 357 | ₹7,140 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 5.73 MB
Tendernotice_2.pdf
PDF • 7.44 MB
Tendernotice_3.pdf
PDF • 2.69 MB
Tendernotice_4.pdf
PDF • 0.07 MB
Lift-Eligibility-criteria-for-Bidders-to-be-uploaded-with-NIT-Document--1---1-.pdf
Tender Documents • 0.27 MB
Special-TandC-for-Electrical-work--Annexure-C---3-.pdf
Tender Documents • 0.35 MB
T-and-C-for-Electrical-work-DLP--Annexure-B---3-.pdf
Tender Documents • 0.24 MB
Annexure-A-BSR-2022.pdf
Tender Documents • 0.26 MB
BOQ_1036722.xls
BOQ • 0.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .