Estimate for special repairing, white washing, distempering flooring consisting of tiles and public health amenities of Quarter No S-2, S-3, S-4, S-5 and S-6 at Grey Canal House Ferozepur

Dismantling cement conglomerate floors(25mm to 50mm) thick i/c concrete

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. size 600x600 mm

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS: 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Scraping White washing, from ceiling

Scraping, cement plaster

Removing Doors and Windows (Steel or Wood) with chowkats and making recesses in walls when the wall is not to be dismantled. Doors of area 3 sqm and below

Removing Doors and Windows (Steel or Wood) with chowkats and making recesses in walls when the wall is not to be dismantled. Windows of area 3 sqm and below

Removing Doors and Windows (Steel or Wood) with chowkats and making recesses in walls when the wall is not to be dismantled. Cirestory window of area 3 sqm and below

Supply and Fixing of Pressed steel frames (chowkats) consisting of 181 gauge (1.25mm) thick steel sheet of the specified section i/c iron lugs (hold fasts), iron hinges, conforming to PWD specifications i/g bolts for fixing tops, lock notches, provisions for receiving tower bolts, hydraulic spring and finished with one priming coat of approved quality, fixed in position i/c the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete. Doors and Window frame of size 118x60mm with 40mm wide single rebate weighing 3.43kg /meter

Supply and Fixing of Pressed steel frames (chowkats) consisting of 181 gauge (1.25mm) thick steel sheet of the specified section i/c iron lugs (hold fasts), iron hinges, conforming to PWD specifications i/g bolts for fixing tops, lock notches, provisions for receiving tower bolts, hydraulic spring and finished with one priming coat of approved quality, fixed in position i/c the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete. Doors & Windows frame of size 151mm x 60mm with 35mm wide double rebate C

½" thick Cement Plaster 1:4 on walls

Terracing consisting of tiles 22.86cm x11.43cm x3.81cm laid over 25mm mud plaster 75mm mud filling on another layer of 25mm mud plaster i/e two coats of bitumen laid hot @1.65kg per sqm on top of RCC slab i/c grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc

Deodar wood doors shutter windows shutter including hinges, screw and cords etc. Complete fixed in position . i) Panelled, glazed or glazed and panelled ii) 40mm thick (Single leaf)

Wire gauze deodar wood door shutter without springs housed in chowkats (Single Leaf)

Hollock wood cup board shutter with pywood panels or faced on both sides fixed in position (excluding the cost of handles, bolt hasps, with staple but fic the labour for fixing them.) 30 mm thick

Preparation of plywood surface for painting i/e sand papering the surface and applying filling with the approved quality filler consistig of white lead, linseed oil, varnish and chalk mitti i/e finishing the surface to required finish complete in all respect.

Applying pink primer or Aluminium priming coat (ordinary quality) on wood work i/e preparation of surface knotting and stoppig etc.

Painting two coats excluding priming coat with ordinary quality synthetic enamel paint in all shades on new wood work to give an even shade.

Finishing walls with exterior decorative cement based paints such as snowcem, rabbiacm etc. on new work two coats to give an even shade

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish

White washing two coats under side ceiling

Preparation of plastered surface for distempering i/e surface, applying filling 178.49 with approved quality filler consisting of plaster of Paris and chalk mitti i/c finishig the surface to the required finish complete

Distempering with Arcyclic washable oil bound distemper (of approved manufactured) two coats over one priming coat to give an even shade )

Iron grated doors, i/e pintle hinges and arrangements

Providing and laying, jointing, fixing and testing ISI marked G.I. Pipe (as perlS 1239) B-Class, premium make such as (Jindal Hissar) including cost of specials such as tees, bends, sockets, elbows etc. cutting, threading and testing in trenches in the ground complete. 15mm internal diameter.

Providing and laying, jointing, fixing and testing ISI marked G.I. Pipe (as perlS 1239) B-Class, premium make such as (Jindal Hissar) including cost of specials such as tees, bends, sockets, elbows etc. cutting, threading and testing in trenches in the ground complete. 20mm internal diameter.

providing, fixing and jointing G.I. union coupling (of approved make with ihe approval EIC) as per IS 1879 in G.I. Pipe Lines. complete in all respects. 20 mm i/d G.1. Union

Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on Gl pipe lines laid in the ground or inside the buildings including all carriages complete. 20mm i/d Gun-Metal peet valves (Heavy Pattern)

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respects C.P.brass 15mm Concealed stop cock with flange

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respects C.P. brass 15mm stop cock Male and Female end

Providing and fixing in position 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respects A(ii) C.P. Brass Bib cock without flange

Providing and fixing in position 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respects A(ii) C.P. Brass Bib cock Long Nose/long body without flange

Providing and fixing in position best Indian make C.P elbow action pillar tap or C.P elbow action bib cock

Providing and fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect. PVC tube connection of size 15mmx450mm with C.P. Brass nut.

Providing and fixing in position automatic brass ball cock in tanks. Brass Ball Cock with rod & Plastic Ball 20mm i/d..

Cutting chase in brick wall in cement or in floor for embedding GI or CI pipe lines and making good tits original conditions. Size 75mmx 50mm

Providing and placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer-in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes including cost of nipples for inlet, outlet and over flow pipes but without base support for tank. Double Layer Tanks as per ISI mark

Providing and fixing M.S. hooks to hold GI pipe line in chase complete to the best satisfaction of Engineer-in-Charge 15mm internal diameter pipe line

Providing and fixing M.S. hooks to hold GI pipe line in chase complete to the best satisfaction of Engineer-in-Charge 20mm internal diameter pipe line

Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification (IS:1729) of approved make (to the approval of Engineer-in-charge) of the self cleaning design with C.P. brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required up to floor level complete in all respects including cutting and making good the walls and floors,etc. minimum depth of water should be 150mm with a minimum seal 50mm. with 75mm i/d outlet deep seal

Providing and fixing in position H.C.I. soil waste vent or antisyphonage pipes to I.S.I. specification 100 mm i/d H.C.I pipe line laid complete

Providing and fixing in position H.C.I. soil waste vent or antisyphonage pipes to I.S.I. specification 75 mm i/d H.C.I pipe line laid complete

Providing lead caulked joints to H.C.I. pipes and specials conforming to I.S.I. Specification (IS: 1729) of approved make (to the approval of Engineer-in-charge) including cost of lead yarn, fuel and tools etc. 100 mm i/d (1.36 kg.) per joint

Providing lead caulked joints to H.C.I. pipes and specials conforming to I.S.I. Specification (IS: 1729) of approved make (to the approval of Engineer-in-charge) including cost of lead yarn, fuel and tools etc. 75 mm i/d (1.13 kg.) per joint

Providing and fixing in position MS or heavy flat iron clamps made out of MS flat iron not less than 5mm of the approved design for fixing C.I. soil waste vent or anti syphonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting M.S Holder bats clamps for 100mm i/d H.C.I pipes

Providing and fixing in position MS or heavy flat iron clamps made out of MS flat iron not less than 5mm of the approved design for fixing C.I. soil waste vent or anti syphonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting M.S Holder bats clamps for 75mm i/d H.C.I pipes

Providing and fixing in position HCI specials for soil waste, vent or antisyphonage pipes to I.S.I specifications (IS: 1729) of approved make (to the approval of Engineer-in-charge) including cutting and wastage etc. cutting in walls roofs or floors etc. making good to its original conditions but excluding cost of lead jointing. For 100 mm i/d i) HR Bend

Providing and fixing in position HCI specials for soil waste, vent or antisyphonage pipes to I.S.I specifications (IS: 1729) of approved make (to the approval of Engineer-in-charge) including cutting and wastage etc. cutting in walls roofs or floors etc. making good to its original conditions but excluding cost of lead jointing. For 100 mm i/d ii) Cowl

Providing and fixing in position HCI specials for soil waste, vent or antisyphonage pipes to I.S.I specifications (IS: 1729) of approved make (to the approval of Engineer-in-charge) including cutting and wastage etc. cutting in walls roofs or floors etc. making good to its original conditions but excluding cost of lead jointing. For 100 mm i/d iii) Collars

Providing and fixing in position HCI specials for soil waste, vent or antisyphonage pipes to I.S.I specifications (IS: 1729) of approved make (to the approval of Engineer-in-charge) including cutting and wastage etc. cutting in walls roofs or floors etc. making good to its original conditions but excluding cost of lead jointing. For 75 mm i/d i) HR Bend

Providing and fixing in position HCI specials for soil waste, vent or antisyphonage pipes to I.S.I specifications (IS: 1729) of approved make (to the approval of Engineer-in-charge) including cutting and wastage etc. cutting in walls roofs or floors etc. making good to its original conditions but excluding cost of lead jointing. For 75 mm i/d ii) Cowl

Providing and fixing in position HCI specials for soil waste, vent or antisyphonage pipes to I.S.I specifications (IS: 1729) of approved make (to the approval of Engineer-in-charge) including cutting and wastage etc. cutting in walls roofs or floors etc. making good to its original conditions but excluding cost of lead jointing. For 75 mm i/d iii) Collars

Laying Cement concrete 1:2:4 with stone ballast or shingle all around block on HCI pipe laid under floors.

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 It. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in- charge.

First class burnt brick work laid in cement sand mortar 1:4 for water storage tank. 39. In 4th storey up to 4 metres above the top of structural roof of lower storey.

12.5 mm thick cemen Plaster 1:5

Cement Concrete 1:2:4 gola 10cmx10cm quadrants along junction of roof with parapet wall finished smooth where specially specified for water tank platform.

Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. Vitreous chinaware standard white pedestal for wash hand basin.

Providing and fixing in position C.P brass basin mixer without pop-up waste system with 450 mm long flexible hose of approved make (to the approval of Engineer-in-charge) complete in all respect.

Any Other Item

The Piran wala L C Society LTD