CRC-WGTRD-128- R S

Amount

Rumble Strip: Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using grade bitumen or emulsion to required line. grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling With a three wheel 80-100 kN static roller capacity, finished to required level and grades to followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508 ( SE approved rate)

Providing and laying seal coat sealing the voids in a bituminous surface laid to the levels, grade and cross fall using Type A Type B and Type C as per Technical Specification Clause 510

Painting lines. dashes, arrows. etc. on roads in two coats on old work with ready mixed road marking paint conforming to lS 164 on bituminous/ concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as drawing and techniczl $Ecificatton Clause 1702

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications

Providing "Sparkle Solar Road Studs manufactured by Tata BP Solar India Ltd of Sze (125mm 125mm) 90 mm height 9From bottom of shank to the top of stud) with detachable battery, m6LEDs- three on each side for Bi- directional studs/ 3 LED on one side for unidirectional studs, IJItra bright LED in amber and red colour,weight per stud 700+ 25gms, flash rate of 50-65 times per minutes. A) Bi derectional Stud

Providing spring post of 750mm height, 80mm dia with round base of 200mm dia made of poly urethane with 3 white reflective bands made of HIG retro-eflectorised sheeting and fixing to the ground as per specifications Of manufacturers

Providing and erecting of City Stud of Dimension 220x100x40 mm Plastic body with one way reflective with IXI 79 glass elements

Providing reflective pavement marker with a provision of spike at the bottom With Micro prjsmatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H's fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance

Providing and fixing lane divider with dimensions 220x150x285 mm base plate 25 mm high Two- way reflective with 1 or 2x128 glass elements rubber flag with 2 round glass reflectors

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on amild steel angle iron post 75 mm x 75 mm x 6mm firmly fixed to the ground bymeans of properly designed foundation with M15 grade cement concrete 450 mmx 450 mm x 600 mm, 600 mm below round level as per drawing and Technical Specification Clause 801 (i) 60cm equilateral Triangle

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on amild steel angle iron post 75 mm x 75 mm x 6mm firmly fixed to the ground bymeans of properly designed foundation with M15 grade cement concrete 450 mmx 450 mm x 600 mm, 600 mm below round level as per drawing and Technical Specification Clause 801 (ii) 60cm Circular

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on amild steel angle iron post 75 mm x 75 mm x 6mm firmly fixed to the ground bymeans of properly designed foundation with M15 grade cement concrete 450 mmx 450 mm x 600 mm, 600 mm below round level as per drawing and Technical Specification Clause 801 (iii) 90cm high octagon

Prakash Kumar Medhi