Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹4,460
Closing Date
20 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE(C),BCD,EKM
4th floor,CTO bld,Karakkatt rd,EKM
Construction of 15m Tower Mast at roof top of TE Kavaratti including earthing and painting 2nd call
2023_BSNL_151605_1
02/EE-BSNL/CD/EKM/2023-24
Open Tender
Civil Works - Buildings
Item Rate
30 days
Kavaratti
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
AO(Cash),O/o PGMT,BSNL,EKM
₹4,460
Yes
3 May 2023
13 Apr 2023
22 Apr 2023
13 Apr 2023
20 Apr 2023
13 Apr 2023
Amount
Steel work in built up tubular ( flats, angles, round, square or rectangular hollow tubes etc.) trusses and connecting plates including nuts and bolts etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. a)Galvanised iron Medium duty Class B materials of Tata or equivalent
Supply of good quality MS hot dipped galvanised bolts, nuts, plain and spring washers etc. of different diameter size specified for tower works. (The item shall be executed for providing in place of missing /thread loosend nuts and bolts) The payment shall be made only to the fresh quantity of materials supplied to the site according to the requirment) a)Galvanised iron Medium duty Class B materials of Tata or equivalent
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
a) 1:1.5:3 (1 cement : 1.5 coarse sand(za) 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
Centering and shuttering including strutting, propping etc. and removal of form for :Centering and shuttering including strutting, propping etc. and removal of form for :
a) Columns, Pillars, Piers, Abutments, Posts and Strutsa) Columns, Pillars, Piers, Abutments, Posts and Struts
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more
Smooth finishing of the exposed surface of RCC with 6 mm thick cement mortar 1:3 (1 cement :3 fine sand)
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Lifting/hoisting the materials of MARR tower in segment of 3m length from the ground to the roof of the proposed building with rope & pulley arrangement without causing damage to the mast materials as well as the building and Erection of mast in segments of 3m each and having approximate weight of 75kg including providing & fixing MS hot dipped galvanized nuts, bolts and washers tightening properly, etc. complete as directed by the Engineer-in-Charge.
Upto a height of Upto a height of 15M over roof top terrace up to 8 metre from ground level
Providing and fixing multistranded high tensile stainless steel stay wire rope of 8mm dia for anchoring and tightening the mast, one end of the stay wire should be connected to the mast at top at specified height and the other end should be anchored to RCC block cast on the roof including necessary stainless steel clamps, clips, nuts and bolts, etc. complete.
Drilling holes of 16mm dia holes on roofing slab/beam upto 10-15cm depth and fixiDrilling holes of 16mm dia holes on roofing slab/beam upto 10-15cm depth and fixing 12mm anchor bars bent to required shape and length which shall be paid separately with high strength polyester resin anchor grout (Fosroc Lockfix-S) or equivalent as per the direction of engineer in charge
Providing and applying paint of approved specification over the MARR mast indicated in item above .(Two coat of epoxy primer (MRF,Asian paint or equalent)should be applied first followed by two coats of epoxy paint Orange/White of approved brand and manufacture should be applied).
MARR mast upto 15 m height
Providing G.I bus bar of 50 x 3 mm connected to the tinned bottom portion of lightning conductor and to the ring earth/plate earth with 2 Nos of 10 mm dia brass nuts & bolts at each connection. The both ends of the bus bar shall be tinned properly and the entire length of bus bar shall be drawn through heat shrink sleeve and shall be shrunk properly. The bus bar shall be clamped to the tower building walls at uniform interval of 1.5 Mt.. using proper clamps such that the bus bar shall be well insulated from the tower building walls all complete as directed by the Engineer-in-charge.
Providing GI strips of size 50 x 3 mm one end connected to the tower leg with GI bolt and nuts including providing and connecting alround the four legs at the bottoms of tower and the other end shall be connected to the GI plate earth/ring eartgh as per item 15 with 2.Nos. of 10 mm dia GI bolts and nuts including clamping the down lead flat to walls/stems without any sharp bends using necessary clamps and screws as directed by the Engineer -in-charge.
Providing and fixing spike type copper lightening arrester of 1.0mtr length with necessary fixtures at top of the tower. The spike shall be insulated from tower by Teflon material. The spike shall be connected to G.I plate earthing by GI strip which shall be paid seperately.
Supply of maintenance free earthing system consisting of UL listed copperbonded steel electrode with minimum 254 micron copper coating all through with ground enhancement material(GEM) tested for leaching & TCLP as per IEC62561-7 with heavy duty inspection pit with green cover made on polyamide material which can handle minimum 5 ton staticload. The systems shall be conforming to IS3043,lS/IEC 62305, IEC 61643-5-54,UL467 and the rod tested for dimention, marking, tensilestrength,salt mist,coating thickness, electrical resistivity test before and after corresion test etc as per IEC 62561-2. Each set shall consists of following BOM (1)17.2mm dia,3metre rod,minimum 254 micron copper bonding steel electrode-1No. (2) Ground enhancrnent material of 22Kg-(2bagof11.3Kg/each) (3)Earth inspection pit with green cover having a minimum load bearing capacity of 5 ton staticload.
stage.html
html • 0.02 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .