SE/GC/TIN/C13/2023-24

Amount

Earthwork excavation in hard stiff clay, black cotton, hard red earth, shales, murram, gravel stoney earth and earth mixed with small size boulders and hard gravelly soil inlcuding all cost of labour, T&P, lead, lift, head load etc complete.

P.C.C 1:5:10 for foundation using 40mm HBG metal including cost of all meterials, labour, lead, lift, head load curing etc., complete.

RR masonry in CM 1:6 mix using hard blue granite stone for foundation and basement including cost of all labour materials lead lift curing etc complete but the Randam rubble will be supplied by the Board.

Brick work in CM 1:6 using Chamber bricks of Size 9"x4 3/8" x 2 3/4" including cost of all meterials, labour, lead, lift, etc., complete.

Plastering with CM 1:5, 12mm thick in all 230 mm thick wall and Ceiling Plastering as per the direction of engineer including cost of materials, labour, curing, lead, lift, T&P, etc., complete.

RCC 1:2:4 using 12mm to 20mm HBG metal for roof slab, beam, lintel, loft, sunshade etc., complete but excluding cost of reinforcement and centering charges etc., complete.

Providing steel reinforcements to all R.C.C works including cost of all materials, labour for cutting, bending, placing and tying in position, lead, lift, T&P, etc., complete

Providing steel centering and shuttering for all R.C.C works with proper slope and dimension including cost of materials, labour, lead, lift, T&P, etc., complete.

Supplying and paving first quality design Double charged vitrified Tiles or Cermica Tile Johnson or eqivalent approved colour and design of size 600mm x 600mm x 8mm thick with C.M. 1:3 20mm thick and pointing with colour cement including cost of all materials labour charges, lead, lift etc., complete.

Providing two coats of oil bound distemper of approved quality, brand & colour for inner wall surfaces including cost of all materials, scaffolding charges, labours, lead, lift, curing, etc. complete.

Colour washing, using first quality of Emulsion Paint of two coats over a priming coat to the outer and inner side of the building including cost of all materials ,lead ,lift ,labour ,T & P etc complete

Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated unsheathed Sc Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch with painting of suitable colour for open PVC light point / fan point (For electronic regulator)

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box

Supplying and fixing of 4’ 40w flu. Fitting complete with electronic choke with teak wood round blocks on wall or ceiling with flu. Tube with PVC unsheathed copper leads from terminals to the fitting with tube.

Supply and fixing of 23 CM SL Bracket with 9W Bulb.

Supplying and fixing of sweep (48") AC ceiling fan with requlator with 300mm down rod on the existing clamps of approved quality of Higher End like Havells / Crompton / usha / bajaj including cost of all materials labour, lead , lift etc complete.

32 AMP DPIC Main switch.Supply and fixing of 32 Amps DP Switch of 500 V with metal clad with fuse and neutral (Side Handle) on suitable TW Board , with earth connection only

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V on 7/20 G.I bearer wire for service connection mains.

Supply and fixing of service connection GI pipe of 25mm dia (Class B) bend at both ends with necessary angle iron upright and end supports for mains with including lead, lift, etc., complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Window of Casement type(open) from the profile the size of outer frame 60mm x 58 mm and shutter profile are reinforcement with GI/1mm 125 GSM and 100% Corrosion free, the Profiles are multi Chambered section with wall thick of 2mm. The EPDM rubber (Black Colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The Corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking sysytems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Terrace flooring with one course of pressed tiles of size 23cm x 23 cm x 20mm using cement mortar 1:3 mixed with water proof compound @ 2% by weight of cement and pointing with same mortar including cost of all materials, lead, lift,labour etc., complete.

Providing UPVC(Un- Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-Plasticized Polyvinyl chloride (UPVC) Section Profiles: The Profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm . The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have reinforcement with a thickness of 1mm to have dimensional stability. The sah should be 60 x 102mm. The mullion should be of 60 x 74 mm. The profile should have co-extruded seals.All the hardware like friction stays, handles should be screw with self tapping screws. The Handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass/ 6mm bison lam Installation: The Profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving MS Electroplated screws into plug

Supplying, Fabrication and Erection of MS Steel Ladder using M.S.Structural steel like M.S. Angle 50 x 50 x 6 mm,M.S Flat 45 x 6 mm and M.S Pipes 40 mm & 20 mm for top Portion and Hand Rails around Roof including cost of all materials, welding, jointing and painting one Coat of Red Oxide over two Coats with enamel Paint, labour, lead, lift etc., complete

GST 18% as per Govt. Norms