Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.0 CrAccepted-AOC | ₹7.0 Cr | L1 | Accepted-AOC Financially L1 |
| 2 | L2₹7.3 Cr+₹30.7 L (4.40%)Rejected-AOC PO HAZARA OLD HOSHIARPUR ROAD VILLAGE DHADDA JALANDHAR 144025 | JALANDHAR | PUNJAB | 144025 | ₹7.3 Cr+₹30.7 L (4.40%) | L2 | Rejected-AOC Financially L2 |
| 3 | L3₹7.5 Cr+₹47.3 L (6.78%)Rejected-AOC | ₹7.5 Cr+₹47.3 L (6.78%) | L3 | Rejected-AOC Financially L3 |
| 4 | L4₹7.6 Cr+₹59.6 L (8.54%)Rejected-AOC | ₹7.6 Cr+₹59.6 L (8.54%) | L4 | Rejected-AOC Financially L4 |
| Sl No | Description | Qty | Unit | SANSUN CONTRACTORS PVT LTD | M/s Kaiser Constructions Engineers and Contractors | DHINGRA BROTHERS (INDIA) | MS NAUSHEY ALI CONTRACTOR |
|---|---|---|---|---|---|---|---|
| 1.00Item Description. | |||||||
| 1.10 | Earthwork in excavation in all soils /Dismantling and taking out of existing WBM/GSB/WMM/ any other stone layer/ any bitumen layer or mixture of all of above etc. for foundation, sub grade replacement etc. .............. Note- for complete item description please refer Annexure-1 of Technical Specification. The quoted rate shall include the activities as mentioned against Sl. no-1 of item description of Annexure-1 of Technical specification. | 7,000 | CuM | 8,40,000 ₹8,40,000 Lowest | 18,20,000 ₹18,20,000 | 20,16,000 ₹20,16,000 | 17,50,000 ₹17,50,000 |
| 2.00 | Supplying and laying Bricks masonry using locally available approved brick (minimum compressive strength 70Kg/Sqcm) of uniform shape {average size- 225mm x 105mm x 65mm (± 5mm)} cement mortar 1-6 (Mix ratio of -One part Cement and Six part Sand) at all elevation including, simultaneous pointing below plinth level and racking out joints above ground level, curing etc. complete as per specifications. | 20 | CuM | 80,000 ₹80,000 Lowest | 1,30,000 ₹1,30,000 | 1,24,800 ₹1,24,800 | 1,04,000 ₹1,04,000 |
| 3.00 | Supply & laying cement concrete 1-2-4 (Mix ratio of -One part Cement, Two part Fine Aggregate and Four part Coarse Aggregate) (minimum compressive strength 150Kg / Sqcm) using graded stone aggregate 20 mm maximum size, preparing of mix using mechanical mixture, including formwork, consolidation, finishing to required level and slope and curing complete as directed by EIC (Cement Content 330 Kg./CuM). | 20 | CuM | 1,08,000 ₹1,08,000 | 1,36,000 ₹1,36,000 | 1,04,000 ₹1,04,000 Lowest | 1,30,000 ₹1,30,000 |
| 4.00 | Providing 15 mm thick cement plaster in cement mortar 1-4 (Mix ratio of -One part Cement and Four part Sand) to brick or concrete surface etc. including preparation of surface hacking, removing of loose materials, cleaning of joints, finishing curing complete all as per direction of EIC. including disposal of rubbish. | 100 | SqM | 19,000 ₹19,000 Lowest | 20,000 ₹20,000 | 28,000 ₹28,000 | 30,000 ₹30,000 |
| 5.00 | Providing and laying 115mm thick soling with brick of uniform shape {average size- 225mm x 105mm x 65mm (± 5mm)} including leveling and dressing the surface by cutting, transporting and filling the earth, complete to the required level and shape, laying bricks with joints staggered and filling with earth and disposal of surplus earth upto a level of 2Km all as per specification. | 100 | SqM | 27,000 ₹27,000 Lowest | 70,000 ₹70,000 | 36,000 ₹36,000 | 39,000 ₹39,000 |
| 6.00 | Supplying & Laying 80mm thick (± 3 mm) cement concrete interlocking paver block of M-40 grade as per technical specification (minimum compressive strength 400Kg / cm2...... Note- for complete item description please refer Annexure-1 of Technical Specification. The quoted rate shall include the activities as mentioned against Sl. no-6 of item description of Annexure-1 of Technical specification. | 500 | SqM | 3,90,000 ₹3,90,000 | 4,75,000 ₹4,75,000 | 3,60,000 ₹3,60,000 Lowest | 4,25,000 ₹4,25,000 |
| 7.00 | Supplying reinforcement steel bars as per IS-1786, transporting and placing in position for all concrete including bending, cutting, binding fabricating, fixing, tying in position with 16 gauge wire soft draw binding wire with chairs, supports etc. complete as per specification including cost of binding wire as per specification. (Binding wire will not be measured for payment). | 1 | MT | 82,000 ₹82,000 | 80,000 ₹80,000 Lowest | 80,640 ₹80,640 | 85,000 ₹85,000 |
| 8.00 | Supplying structural steel flat, angle ,pipes, all sections etc. and fabrication with cutting, welding and fixing in position of all type structural steel as per direction of engineer including painting with two coat of S.E. paint of make Berger Luxol / Asian apoclite / Nerolac - kansai Nerolac over one coat of red oxide primer for misc. structural steel fabrication work etc. complete. | 0.5 | MT | 50,000 ₹50,000 | 50,000 ₹50,000 | 51,840 ₹51,840 | 45,000 ₹45,000 Lowest |
| 9.00 | Providing and fixing Black granite stone 18mm thick (Approx.) of required size for Inauguration board with writing Golden colour letters 1" to 2" in height 75 Nos. (Approx.), maximum 1" Golden border all around complete as per requirement at various locations. Writing matter will be provided by NAPS. (Note- Brick pedestal for fixing Inauguration board will be made separately and paid in relevant items). | 1 | SqM | 8,500 ₹8,500 | 3,400 ₹3,400 Lowest | 4,400 ₹4,400 | 7,000 ₹7,000 |
Tender Value
₹9.0 Cr
EMD Value
₹18.0 L
Closing Date
12 May 2025, 5:00 pmClosed
Chief Suprendent
CS office NAPS Narora Bulandshar UP
Construction of Bituminous Road from Ramghat to Gokulpur under CSR
2025_NPCIL_232214_1
NAPS/CTC/CVL/2025/CPPP/PT/1143
Open Tender
Civil Works
Item Rate
300 days
NAPS Narora
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹18.0 L
8 Aug 2025
21 Apr 2025
14 May 2025
21 Apr 2025
12 May 2025
29 Apr 2025
21 Apr 2025 - 28 Apr 2025
Item Description.
Earthwork in excavation in all soils /Dismantling and taking out of existing WBM/GSB/WMM/ any other stone layer/ any bitumen layer or mixture of all of above etc. for foundation, sub grade replacement etc. .............. Note- for complete item description please refer Annexure-1 of Technical Specification. The quoted rate shall include the activities as mentioned against Sl. no-1 of item description of Annexure-1 of Technical specification.
Supplying and laying Bricks masonry using locally available approved brick (minimum compressive strength 70Kg/Sqcm) of uniform shape {average size- 225mm x 105mm x 65mm (± 5mm)} cement mortar 1-6 (Mix ratio of -One part Cement and Six part Sand) at all elevation including, simultaneous pointing below plinth level and racking out joints above ground level, curing etc. complete as per specifications.
Supply & laying cement concrete 1-2-4 (Mix ratio of -One part Cement, Two part Fine Aggregate and Four part Coarse Aggregate) (minimum compressive strength 150Kg / Sqcm) using graded stone aggregate 20 mm maximum size, preparing of mix using mechanical mixture, including formwork, consolidation, finishing to required level and slope and curing complete as directed by EIC (Cement Content 330 Kg./CuM).
Providing 15 mm thick cement plaster in cement mortar 1-4 (Mix ratio of -One part Cement and Four part Sand) to brick or concrete surface etc. including preparation of surface hacking, removing of loose materials, cleaning of joints, finishing curing complete all as per direction of EIC. including disposal of rubbish.
Providing and laying 115mm thick soling with brick of uniform shape {average size- 225mm x 105mm x 65mm (± 5mm)} including leveling and dressing the surface by cutting, transporting and filling the earth, complete to the required level and shape, laying bricks with joints staggered and filling with earth and disposal of surplus earth upto a level of 2Km all as per specification.
Supplying & Laying 80mm thick (± 3 mm) cement concrete interlocking paver block of M-40 grade as per technical specification (minimum compressive strength 400Kg / cm2...... Note- for complete item description please refer Annexure-1 of Technical Specification. The quoted rate shall include the activities as mentioned against Sl. no-6 of item description of Annexure-1 of Technical specification.
Supplying reinforcement steel bars as per IS-1786, transporting and placing in position for all concrete including bending, cutting, binding fabricating, fixing, tying in position with 16 gauge wire soft draw binding wire with chairs, supports etc. complete as per specification including cost of binding wire as per specification. (Binding wire will not be measured for payment).
Supplying structural steel flat, angle ,pipes, all sections etc. and fabrication with cutting, welding and fixing in position of all type structural steel as per direction of engineer including painting with two coat of S.E. paint of make Berger Luxol / Asian apoclite / Nerolac - kansai Nerolac over one coat of red oxide primer for misc. structural steel fabrication work etc. complete.
Providing and fixing Black granite stone 18mm thick (Approx.) of required size for Inauguration board with writing Golden colour letters 1" to 2" in height 75 Nos. (Approx.), maximum 1" Golden border all around complete as per requirement at various locations. Writing matter will be provided by NAPS. (Note- Brick pedestal for fixing Inauguration board will be made separately and paid in relevant items).
Filling and construction of subgrade/ embankment/shoulders/any other filling as per site requirement with material obtained / supplied........ Note- for complete item description please refer Annexure-1 of Technical Specification. The quoted rate shall include the activities as mentioned against Sl. no-10 of item description of Annexure-1 of Technical specification.
Filling materials in layers of 200mm obtained / supplied by contractor from borrow area or any other approved source complying to above specifications, rolling, watering and compacting as mentioned above all complete......... Note- for complete item description please refer Annexure-1 of Technical Specification. The quoted rate shall include the activities as mentioned against Sl. no-10.1 of item description of Annexure-1 of Technical specification.
Filling and construction of subgrade/ embankment/shoulders/any other filling as per site requirement with material obtained / supplied........ Note- for complete item description please refer Annexure-1 of Technical Specification. The quoted rate shall include the activities as mentioned against Sl. no-10 of item description of Annexure-1 of Technical specification.
With material conforming to Grade- V /VI of MORTH specification having CBR Value-30 as per above ......... Note- for complete item description please refer Annexure-1 of Technical Specification. The quoted rate shall include the activities as mentioned against Sl. no-11.1 of item description of Annexure-1 of Technical specification.
Providing and laying non-pressure 150mm dia NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.
Providing and laying RCC 1-1.5-3 (Mix ratio of -One part Cement, One & half part Fine Aggregate and Three part Coarse Aggregate) .......... Note- for complete item description please refer Annexure-1 of Technical Specification. The quoted rate shall include the activities as mentioned against Sl. no-13 of item description of Annexure-1 of Technical specification.
Dismantling/breaking of existing plain cement concrete / brick work cleaning of bricks etc. stacking serviceable material and disposal of rubbish by Tractor/buggi for a lead of 5 km. as directed by engineer.
Providing and laying Wet Mix base course Macadam (WMM) (as per MORTH specification attached in technical specification) in 2 layers of 125 mm each using machine......... Note- for complete item description please refer Annexure-1 of Technical Specification. The quoted rate shall include the activities as mentioned against Sl. no-15 of item description of Annexure-1 of Technical specification.
Providing and applying primer coat using bituminous emulsion of grade SS-1 (Indian oil corporation, Hindustan Petroleum, Bharat Petroleum & Hincol ) (as per IS :8887)...... Note- for complete item description please refer Annexure-1 of Technical Specification. The quoted rate shall include the activities as mentioned against Sl. no-16 of item description of Annexure-1 of Technical specification.
Providing and applying Tack Coat just before placing DBM/BC over the dry and cleaned/prepared road surface using hot straight run......... Note- for complete item description please refer Annexure-1 of Technical Specification. The quoted rate shall include the activities as mentioned against Sl. no-17 of item description of Annexure-1 of Technical specification.
Providing & laying Dense Bituminous Macadam (Consolidated) in layers of 50-100mm using bitumen of paving grade VG-30 (Indian oil corporation, Hindustan Petroleum, Bharat Petroleum & Hincol ) as per IS-73-2006,…. Note- for complete item description please refer Annexure-1 of Technical Specification. The quoted rate shall include the activities as mentioned against Sl. no-18 of item description of Annexure-1 of Technical specification.
Providing, Laying Cleaning and Rolling Premixed Seal Coat around 12 hrs. after BC laying (No tack coat will be paid for laying seal coat over bituminous concrete) in 10 mm (Approx.)...... Note- for complete item description please refer Annexure-1 of Technical Specification. The quoted rate shall include the activities as mentioned against Sl. no-19 of item description of Annexure-1 of Technical specification.
Filling and construction of subgrade/ embankment/shoulders/any other filling as per site requirement with material obtained / supplied........ Note- for complete item description please refer Annexure-1 of Technical Specification. The quoted rate shall include the activities as mentioned against Sl. no-10 of item description of Annexure-1 of Technical specification.
40 mm compacted thickness with bitumen of grade VG-30 (Indian oil corporation, Hindustan Petroleum, Bharat Petroleum & Hincol) @ 5.5% (percentage by weight of total mix) and filler prepared in Hot Mix Plant.
Preparation and consolidation of existing subgrade / W.B.M/soil surface by power road roller of 8 to 12 tonne capacity , vibratory roller etc. as required to achieve required........ Note- for complete item description please refer Annexure-1 of Technical Specification. The quoted rate shall include the activities as mentioned against Sl. no-21 of item description of Annexure-1 of Technical specification.
Cleaning and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs..... Note- for complete item description please refer Annexure-1 of Technical Specification. The quoted rate shall include the activities as mentioned against Sl. no-22 of item description of Annexure-1 of Technical specification.
Breaking of RCC & cutting of reinforcement and disposal of all rubbish up to a lead of 2 Km. by tractor, trolley along with driver & required manpower will be provided by the contractor at his own cost all as per direction of EIC.
Providing and laying non-pressure 300mm dia NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.
Providing and laying non-pressure 600mm dia NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.
Compaction of excavated soil, back filling of excavated soil, materials (soil , stones, bitumen mix ) from the site itself and construction of subgrade/ embankment / shoulders / any other filling as per site requirement.......... Note- for complete item description please refer Annexure-1 of Technical Specification. The quoted rate shall include the activities as mentioned against Sl. no-26 of item description of Annexure-1 of Technical specification.
Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material with primer by thermoplastic paint applicator machine fitted with profile shoe, glass beads dispensor , heater , etc all accessories, driven by operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
BOQ.xls
BOQ • 0.19 MB
BOQ_2.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .