REPAIR REPLACEMENT OF FLOORING PLUMBING SANITARY FITTINGS WELCOME MAINTENANCE AC GALVALUME SHEETS FALSE CEILING ETC AND CERTAIN ELECTRICAL WORKS UNDER GE I GOS

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed

M&L for coloured glazed ceramic tiles in vertical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick plastering in CM 1:4 as a backing coat complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles in vertical surface of size 450X 350X 7 mm thick over 10 mm thick back coat of cement mortar in 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match over complete all as specified and as directed.

M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar in 1:6 for laying floor finishes complete all as specified and as directed

M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar in 1:6 for laying floor finishes complete all as specified and as directed

M&L for light shade vitrified Ceramic tiles 10 mm thick (Square/rectangular) polished, area of each tiles exc 0.36 sqm but n exc 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed in CM 1:6 complete all as specified and directed.

M&L for light shade vitrified Ceramic tiles 10 mm thick (Square.rectangular) polished, area of each tiles exc 0.36 sqm but n exc 0.42 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backcoat in CM 1:4 complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25 mm thick laid over 15 mm thick screed bed or bedding layer of cement mortar in 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed

M&L for Machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick back coat of cement mortar in 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed

M&L for 20 mm thick Granite (of any type) work (table rubbled and polished) in steps, Jambs, Pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm screed complete all as specified and directed

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed

M&L for 40 mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) in sub base finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed

Dismantling of water tank Capacity exc 250 not exc 500 Ltrs and removing to store complete all as specified and as directed

Dismantling of water tank Capacity exc 500 not exc 1000 Ltrs and removing to store complete all as specified and as directed

Hoisting and Fixing of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 ltrs hoisted and fixed in position specified in SSR Part I complete all as specified and as directed.

S&F for 25 mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F in repairs for 25 mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F in repairs white vitreous china squatting pan orissa pattern of size 580mmx440 mm white, with integral foot rests connected with 'P' or 'S' trap and flushing pipe and taking out old WC & connections complete all as specified and as directed

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed

S&F in repairs PVC low level flushing cistern 10 litre capacity, valveless, symphonic action type with inlet, ball valve, float and handle incl bracket, PVC conection pipe and flush pipe of polyethylene of low or high density or PVC. 32 mm dia complete all as specified and directed

S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long Brass Chromium plated between flanges complete all as specified and as directed

S&F in repairs soap dish vitreous china coloured approximate size (160mmx160mmx90mm) complete all as specified and as directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), including providing and fixing plugs, bedding urinal against wall in cement mortar :2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)

S&F in repairs 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 20mm stop valves (concealed type), fancy type chromium plated, long sunk and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs for Brass chromium plated shower rose 125 mm size fixing to steel pipe or union complete all as specified and as directed

Taking up or down 25 to 32 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed

Supply and laying of 25mm of CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. tranches complete all as specified and directed.

Supply and laying of 20mm of CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. tranches complete all as specified and directed.

S&F for 20mm dia CPVC Brass thread elbow complete all as specified and as directed.

S&F for 20mm dia CPVC Brass thread Tee complete all as specified and as directed.

S&F for 25mm CPVC Brass thread union complete all as specified and as directed.

S&F for 25mm CPVC ball valve complete all as specified and as directed.

S&F for 25mm CPVC tank adopter complete all as specified and as directed.

S&F in repairs Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed

S&F in repairs110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls complete all as specified and as directed

S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls complete all as specified and as directed

S&F for 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed

S&F for 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed

S&F for 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed

S&F for 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed

S&F for 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed

S&F for 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed

S&F for PVC (SWR) cowl of 110 mm dia complete all as specified and as directed..

S&F for Stack clamps for 110 mm bore pipe, out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof

S&F in repairs PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement including disconnection of old existing trap, and connected with existing water pipe complete all as specified and directed.

S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

Hoisting and Fixing of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 ltrs hoisted and fixed in position specified in SSR Part I ,complete all as specified and as directed.

M&L for cutting chases, pinning in brickwalls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20 cm girth complete all as specified and as directed.

S&F in repairs 150 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S&F in repairs 32 mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm45gms/40mm-60 gms) complete all as specified and as directed

S&F in repairs 40 mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm45gms/40mm-60 gms) complete all as specified and as directed

S&F in repair 4 levers brass mortice lock, verticle type, size 100mm. complete all as specified and as directed.

S&F in repairs 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Taking down the Chowkhats or frames not exc. 1.5 sqm each (without taking off shutters from the frames) complete all as specified and as directed

Taking down the Chowkhats or frames exc 1.5 sqm but n exc 4 sqm each (without taking off shutters from the frames) complete all as specified and as directed

Taking down the Shutters of any description n exc 1 sqm each complete all as specified and as directed

Taking down the Shutters of any description exc 1 sqm and n.exc 2 Sqm each complete all as specified and as directed

M&L for refixation of shutters of any description in same opening n exc 1 sq. m each complete all as specified and as directed

M&L for refixation of shutters of any description in same opening exc 1 sq. m but not exc 2 Sqm each complete all as specified and as directed

M&L for IInd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

M&L for 35 mm thick IInd Class Hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete as specified and directed.

S&F 35mm thick, glazed/skelton shutters with second class hard wood,open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of members of shutter as specified in SSR Part I Section 8, clause 8.24 (a) complete as specified and directed.

S&F for Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing in SSR Part II 2010 complete all as specified and as directed

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 complete all as specified and as directed

M&L for Preparation of new or untreated surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and as directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as speci

fied and directed

M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 (20 mm graded aggregare) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished flat surface of concrete complete all as specified and as directed.

M&L for fixed in repairs pelmet boxes or in narrow widths n. exc l5cm each, 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and as directed.

M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work and fixed with wooden beading complete all as specified and as directed

M&L PCC 1:2:4 type B0 (using 12.5 mm graded aggregate) as in hold fast and filling of steel chowkhat etc. complete all as specified and directed

S&F for mild steel flat iron as in hold fast 25x6 mm confirming to Fe290 Gde E-165 complete all as specified and directed

S&F for mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F for 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F for 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F for 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repairs 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F in repairs 75 mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs Aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S&F in repairs 100 mm long Butt hinges, medium weight, cold rolled mild steel fixed to Chowkats complete all as specified and directed

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel fixed to Chowkats complete all as specified and directed

S&F in repairs Aluminium Handle 150 mm long cast type, anodised extruded fabricated type complete all as specified and as directed.

S&F Aluminium Handle 150 mm long cast type, anodised extruded fabricated type complete all as specified and as directed.

S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.

S&F in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps, waste chain and plug and porcelain stopper including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed.

S&F in repair pillar taps of size 15mm, chromium plated fancy type cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S&F in repairs for bib taps fancy type CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferule and fixed of size 15mm bore in repair complete all as specified and as directed.

M&L for Providing precast cement concrete manhole covers, Type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:4 complete all as specified and as directed

M&L for Mild steel TMT bars 10 mm dia and over ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for Mild steel TMT bars 6mm to 8mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F for Aluminium (Extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc, from tanks exc.250 Ltrs not exc. 500 Ltrs and from mouths of circulating pipes, etc. complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc, from tanks exc.500 Ltrs not exc. 1000 Ltrs and from mouths of circulating pipes, etc. complete all as specified and as directed.

S&F for Anodised aluminium ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed

M&L for chequered cement concrete tiles 25cmX25cmX25mm thick, set, joined and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) in subbase of floor etc complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of walls by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot

, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of ceiling by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed.

M&L for preparing old plastered surfaces of walls by washing, rubbing down and scraping of existing distempering/painted surfaces etc and applying one coat of distemper oil emulsion complete all as specified and as directed.

M&L for complete removal of existing treatment and applying two coats of walls with distemper oil emulsion white or tinted over alkali resistant primer including 3 mm thick wall care putty complete all as specified and as directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall cornices etc by brooming down or steel wire brushing, scraping down, the surfaces covered by smoke soot, growth of moulds and moos, efflorescent, having oil and gresase spots and applying one coat of cement base paint (white or tinted) complete all as specified and as directed

M&L for complete removal of existing treatment on wall including removal of vegetation and apply finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade in two coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

M&L for Preparation of old painted surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for Preparation of old painted surfaces of steel and iron surfaces of steel surfaces of any description, over 10cm in width or girth, not otherwise described, applying one coat of synthetic enamel paint complete all as specified and directed

M&L for taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of external wall of brick work or stone surfaces in two layers (10 mm and 5 mm thick) in cement Mortar in 1:4 using water proofing compound in top layer (Water Proofing Compound measured separately) and finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for rendering 10 mm thick internal wall on fair faces of brick work or concrete surfaces in cement Mortar in 1:6 and finished even and smooth (without using extra lime or cement)complete all as specified and directed.

M&L for rendering 5 mm thick on ceiling in cement mortar 1:3 finished even & smooth without using extra cement complete all as specified and directed

Supply only Liquid water proofing compound for external wall plastering (for 5 mm thick plastering) complete all as specified and directed

M&L for preparaion of newly plastered surfaces of walls and finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper-oil-emulsion over a coat of primer including 3 mm thick wall care putty complete all as specified and as directed.

M&L for preparation of new plastered surface of ceiling etc and applying three coats of white wash complete all as specified and directed

Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed

Demolition of brickwork or stone/ boulder masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed

M&L Brick work with modular fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed

M&L for Brick work with modular fly ash bricks straight or curved on plan to any in half brick thiick walls radius built in CM 1:4 complete all as specified and as directed

M&L for 25 mm thick Cement concrete type B-0 1:2:4 (12.5 mm graded aggregate) complete all as specified and as directed

Dismantling asbestos cement (corrugated semicorrugated etc) sheet in roof covering complete all as specified and as directed.

S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

S&F for rolled mild steel in steel work tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

M&L for painting steel and iron surfaces of steel surfaces of any description, over 10cm in width or girth, not otherwise described, applying two coats of synthetic enamel paint over coat of red oxide primer including preparation of new surface complete all as specified and directed

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for Anodised aluminium snap grid size 605 X 605 mm frame work for false ceiling complete all as specified and as directed

S&F for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed

S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device ,complete all as specified and as directed.

S&F in repairs for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm ,complete all as specified and directed

M&L for 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed

M&L Water proofing treatment on RCC roof etc. comprising with the following operation & as specified herein below:- (a)Taking down existing old tarfelt, bituminous compound including cleaning & removing debris to a distance exc 100 m n.exc.250m. (b) M&L for 15 mm thick cement mortar in 1:4 finished even and smooth including Water proofing compound (c) Preparing & cleaning of fully dried cement plastered surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 litres per sqm conforming IS-3384. (e) A layer of APP based polymeric membrane membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 100 mm in longitudinal direction. (f) One coat of aluminium paint over APP membrane @0.11Kg/Sqm. Note:- Prior to execution of the APP Membrane works, leak proof test shall be done by ponding water on roof slab to minimum depth of 25 mm. The entire roof slab shall be flooded with water for 48 hours. The necessary barrier shall be made to make feasible to stagnate water for 48 hours on roof slab.

M&L for preparation of new plastered surface of ceiling/boards etc and applying three coats of white wash complete all as specified and directed

S&F in repair 15mm dia Angle Stop Cock with wall flange omplete all as specified and as directed.

S&F in repairs PVC waste pipe of 32 mm size flexible and 1.2 mtr long, fitted to basin or sink complete all as specified and as directed.

S&F in repairs cylindrical tank cover for 500 ltrs, 1000 Ltrs & 2000 Ltrs complete all as specified and directed.

S&F for 20mm dia two way bib cock complete all as specified and directed.

S&F wall mixer 3-in-1 complete all as specified and directed.

S&F in repairs cylindrical tank cover for 500 ltrs, 1000 Ltrs & 2000 Ltrs complete all as specified and directed.

M&L for rewinding the exhaust fan any make 300/450mm sweep any size with super quality copper conductor adequate size of winding wire of existing size, refixing the ball bearing, greasing complete all as specified and directed .

Supply only down rod of ceiling fan with medium grade of 15 mm size pipe complete with drilling holes, cutting and making threads as per site requirement up to 0.50 to 1 mtr, painting with two coats of paint as existing all as specified and directed.

Supply and fixing exhaust fan 300 mm sweep, 1400 RPM with louver complete all as specified and directed.

S & F LED light fitting 1 x 40 Watt LED Al batten complete with new generation LED batten for multipurpose application made from polycarbonate diffuser complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size incl taking down the old USNV ,complete all as specified and directed.

Supply and fix switch socket combination 2-in-1, 3/5 pin 5 and 15 Amp incl taking down the old USNV ,complete all as specified and directed.

Energy efficient LED integrated batten suitable for indoor applications tube light fitting 1x20 Watt 4 FT complete, Trim LED NEO ,complete all as specified and directed.

S & F LED light fitting 1 x 10 Watt , indoor decorative and integrated LED driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size incl taking down the old USNV complete all as specified and directed.

S&F Ceiling Fan regulator electronic step type as per sample all as specified.

Material and labour for angular type lamp holder, PVC/ polycarbonate type with back plate suitable for 15/18 watts for batten fitting, including plastic square board of required size ,complete all as specified and directed.

Supply and fix recess/ceiling down lights 36 watt LED (600x600mm) size, ultra slim with extruded alumininium housing and milky diffuser complete including taking down old unsv ,complete all as specified and directed.

Supply and fix switch socket combination multipurpose 2 in 1 3 pin, 5 Amp flush type ,complete all as specified and directed.

S & F bell push piano (Flush type) 5 Amp 240 Volts incl taking down the old unsv ,complete all as specified and directed.

S & F bell/buzzer electric single phase 240 volt incl taking down the old unsv ,complete all as specified and directed.

S&F in repair casecade health faucet hose and hook complete all as specified and directed.

S&F in repair Corner shelf complete all as specified and directed.

S&F for Single piece white colour EWC Size 620x350x725mm , complete all as specified and as directed.

M&L for complete removal of existing painting by scrapping the old surface, preparation of fan surface and applying spray painting with spray nozzle to ceilling fan of any make and any size with two coat of synthetic enamel paint as existing colour/shade over a coat of red oxide primer complete all as specified and directed.

S&F LED lamp 9 Watt ,complete all as specified and directed.

S&F Isolator DP 32A, 240 volts ,complete all as specified and directed.

S&F MCB SP 10 to 32 Amp, 240 volt ,complete all as specified and directed.

M&L for taking down ceiling fan & Exhaust fan of any make and any size for repair/replacement of defective spare parts and overhauling the fans by cleaning, greasing and replacement of old split pin, rubber reel, connected items and provide flexible wire of size 23/0.0076 for connection from ceiling rose to fan/exhaust fan, refixing the same and testing complete all as specified and directed. Note:- Rewinding, painting and supply of new components will be measured and paid separately under relevant items complete all as specified and directed.

Supply only ball bearing of suitable size for ceilling fans any make, type and size complete all as specified and directed.

Supply only capacitor of 4 MFD, 240 Volt suitable for ceilling/exhaust fan complete all as specified and directed.

M&L for rewinding the ceiling fan any make 1200/1400mm sweep and any size with super quality copper conductor adequate winding wire of existing size complete all as specified and directed.

Supply and fixing 5 star rating Ceiling Fan 1200 mm sweep with blade, down rod complete all as specified and directed.

Taking down unsv pump set 5 HP capacity from connected pipe line, dismantling existing motor/pump, rewinding motor by supper enamelled copper wire with existing size, insulation and varnishing complete, replace wornout ball bearing and gland packing of existing pump set and refitting the repaired pump set on pipe line, testing and commissioning complete all as specified and directed.

Taking down unsv booster pump 05 HP capacity, 3 phase from UG sump from existing connected pipe line, dismantling existing motor/pump, rewinding motor by supper enamelled copper

wire with existing size, insulation and varnishing complete, replace wornout ball bearing and refitting the repaired booster pump on pipe line, testing and commissioning complete all as specified and directed.

S&F of 3 layer PP-R (polypopropylene random co-polymer) pipes SDR 7.4/PN16 UV steblised and antimicrobial fusion welded having thermal estability for hot and cold water supply all PP-R plain end brass threaded polypopropylene randum fittings laid in trenches 63 mm O/D complete with all connected fittings incl taking down old unsv complete all as specified and directed.

S&F of 3 layer PP-R (polypopropylene random co-polymer) pipes SDR 7.4/PN16 UV steblised and antimicrobial fusion welded having thermal estability for hot and cold water supply all PP-R plain end brass threaded polypopropylene randum fittings laid in trenches 50 mm O/D complete with all connected fittings incl taking down old unsv complete all as specified and directed.

S&F of 3 layer PP-R (polypopropylene random co-polymer) pipes SDR 7.4/PN16 UV steblised and antimicrobial fusion welded having thermal estability for hot and cold water supply all PP-R plain end brass threaded polypopropylene randum fittings laid in trenches 32 mm O/D complete with all connected fittings incl taking down old unsv complete all as specified and directed.

Supply only capacitor of 2.5 MFD, 240 Volt suitable for ceilling/ exhaust fan complete all as specified and directed.

S&F Plastic enclosure without MCB SP & DP as required in site with fixing on wall/pole etc with binding/fixing material all as specified and directed by Engr-in-Charge.

S&F of 3 layer PP-R (polypopropylene random co-polymer) pipes SDR 7.4/PN16 UV steblised and antimicrobial fusion welded having thermal estability for hot and cold water supply all PP-R plain end brass threaded polypopropylene randum fittings laid in trenches 25 mm O/D complete with all connected fittings incl taking down old unsv complete all as specified and directed.

S&F in replacement of PP-R gate valve 32 mm (brass insert) O/D complete all as specified and directed.

Supply and replacement thermostat range 0°-75°C for the geysers of 25 to 35 litres as per sample required in existing geysers installed at site complete, all as specified and directed.

Supply and replacement safety valve/high pressure valve 15 mm complete, all as specified and as directed.

Supply and replacement PVC threaded tough rubber flexible pipe/tubing of 15 mm size with PTMT nuts at both end 300/450 mm long for geysers inlet/ outlet connections, all as specified.

Each Job

Supply and replacement running capacitor 36/45/80 MFD suitable for 1.5 Ton window type and split type air conditioner including taking down old unsv all as specified and directed.

S&F in replacement of PP-R gate valve 25 mm (brass insert) O/D complete all as specified and directed.

S&F foot valve 50/63 mm dia CI/GI with complete fittings including taking out old unsv complete all as specified and directed.

Maint and servicing of window type/split type air conditioner including cleaning filter, washing with soap solution after removing from site and refixing complete all as specified and directed by Engr -in-Charge.

Supply and replacement starting relay assembly including coat & cover and clips suitable for window/split typeair conditioner all as specified and directed.

Supply and replacement unserviceable compressor (sealed unit) from split type air conditioner of capacity 1.5 Ton on position with nuts, bolts, ruber gromote and washers, connecting copper tubing by welding/flare nuts including taking out old unsv compressor of make approved by Engr-in-Charge all as specified and directed.

Carrying out pressure leak test by nitrogen pressure for detecting leak in condensing unit, refrigerant pipe and repairing the leakage by welding or brazing of condensing unit and refrigerant pipe, putting under pressure for leak, checking after repairs of leak pipe including transporting and carrying out T&P required at site for work of 1.5 Ton capacity air conditioner all as specified and directed.

Flushing out by N2 and CTC, vaccumnation, supply and charging of refrigerant gas into the system for 1.5 Ton capacity air conditioner all as specified directed

Supply and replacement of blower motor suitable for 1.5 Ton window/split type air conditioner AC single phase 230 Volts including bushes, testing and commissioning complete all as specified and directed.

Supply and replacement thermostat switch suitable for air conditioner 1.5 Ton capacity any make all as specified and directed by Engr-in-Charge.

Dismantling of defective cooling indoor/outdoor unit of 1.5 Ton capacity of split type air conditioner complete with connected piping and corded remote control etc and refixing on wall/floor after carrying out repairs and servicing and making good the disturbed surfaces all as specified and directed by Engr-in-Charge.

Supply and replacement of cooling coil assembly suitable for air conditioner 1.5 Ton capacity all as specified and directed.

Supply and replacement suction copper pipe line heavy ½” dia with foam insulation and flair nuts from indoor to out door unit of split type air conditioner 1.5 Ton capacity all as specified and directed.

Excavation in trenches in hard/dense soil n.exc 1.5 mtr wide and n.exc 1.5 mtr depth and getting out pole foundation/cable trench complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing surplus excavated material not exc 50 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

All as per item No 236 above but of capacity 10000 gallons UG sump complete all as specified and directed

Supply and replacement of air filter Pad suitable for air conditioner 1.5 Ton capacity complete all as specified and directed

Supply and replacement of condensing unit of 1.5 Ton capacity complete with connected lead and iron stand etc including taking down old defective all as specified and directed.

Supply and replacement heating unit (element) ISI marked of 1500 watts triangular/circuler shape as per sample required in existing geysers installed at site including rubber washers complete all as specified and directed.

Supply and replacement Indicator lamp rectangular/round type as required at site complete all as specified and directed.

Supply and fix Thermal Magnetic release, MCCB 160 Amps 415 Volts, 4 pole 25 KA, Ics=100% Icu, adjustable overload 80-100% and adjustable short circuit 5-10In complete with all required fittings items Including Taking down old unservicable Mccb's complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cables heavy duty 1100 volts grade, with stranded aluminium conductor with all fixing & connecting accessories such as aluminium cable lugs, cable gland, nut, bolts, washer etc Including taking out existing unserviceable cable of 4 core x 16 Sqmm complete all as specified and directed:-

M & L disconnecting and taking down old unserviceable chlorination system and Supply Install test and commisioning of Chemical Dosing System of capacity 25 ltr/hrs at 10 kg/cm2 pressure coupled with 3 phase or single phase of capacity 0.5 Hp 1440 RPM with agiator dosing motor and agiator operated by single phase motor against rod (pvc) sweep blade FRP tank of capacity 150 ltr with inlet outlet connection and drain point hole complete all as specified and as directed. Note :-The unserviceable pump set will be deposited to the AGE E M store yard.

Each drum 45 kg

All as per item No. 268 above but discharge copper pipe line heavy duty 3/8” dia.

Supply and fixing street light fitting LED type 45 Watt new generation energy saving powder coated pressure die cast aluminum high powder with heat resistant toughened glass with lens & IP65 with high power LEDs as light source and electronic driver with GI tubing 40mm dia, mounting b

M&L for modular Bell push Switch single pole one way 6A/10Amps complete Including taking down unserviceable ones all as specified and directed.

S&F modular switch single pole 1 way 6A, complete Including taking down unserviceable switch all as specified and directed.

Supply only Oil filled capacitor of 2.5 MFD, 240 Volt suitable for ceilling/ exhaust fan complete all as specified and directed.

M & L for carry out water quality anyalsis for bacterial ,chemical and biological analysis including for collection ofwater samples from the Tube well and testing from Govtapproved testing laboratory , submitting of report fromminium following parameters. (a) Turbudity (NTU) (b) pH (c) Total Hardness as CsCO2(mg/l) (e) Iron as Fe(mg/l) (f)Magnesium as Mg (mg/l) (g) E-coli or thermotolerantcoliform bacteria (h) from any NABL accredited lab.Notes: 1. Saperate water samples should be collected &tested from borewell. 2. No payment shall be made to contractortill submission of water test every two month report for the watersamples of pump house ,complete all as specified and directed.

S&F modular socket outlet 6A 2/3 pin combined 2 module complete Including taking down unserviceable socket all as specified and directed.

S&F modular switch 16A single pole one way complete Including taking down unserviceable switch all as specified and directed.

S&F socket outlet 6A/16A- 2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing and testing CI sluice valves 100mm bore of dia both ends flanged and drill in with brass spindle and brass check nuts, hand wheel made out of CI complete suitable for tested hydrostatic pressure 15 Kg/Sqcm. (PN 1.6) and confirming to IS 780 complete and of size 100mm dia ,complete all as specified and directed.

racket with its clamp incl two coats of synthetic enamel paint over a coat red oxide primer and with all accessories, incl connecting of with 2 run of flexible copper conductor of size 1.5 sq mm cable from fitting to junction box, testing & commissioning ,complete all as specified and directed.

Supply and fixing decorative LED post top lantern luminaire with milky diffuser and painted aluminium deflector complete with connecting of suitable size of wire incl taking down old unsv ,complete all as specified and directed.

M&L for call bell modular type AC 230 volt single pole complete Including taking down unserviceable ones all as specified and directed.

Supply and fixing 9W decorative LED extruded aluminium bollard light with integrate driver complete with connecting of suitable size of wire incl taking down old unsv ,complete all as specified and directed.

Supply and fixing PVC insulated copper wire 1.5 Sqmm, three core including taking out old unsv wire ,complete all as specified and directed.

Supply and fixing 3 core copper submersible flat cable 10 Sqmm size, 1100 volts gradeIncluding taking down unserviceable burnt cable all as directed and specified by Engr-in-charge.

Taking down old unserviceable and Supply and Fixing Submersible pump ,electric driven 415 volt 5 HP ,75 mtr head 180 LPM ,50 mm outlet including lowering by manpower and mechanical equipment complete all as secified and as directed. Note :-The unserviceable pump set will be deposited to the AGE E M store yard.

S&F in replacement of NON return valve 80 mm bore class PN - 1.6 with flanged including jointing materials,rubber gasket suitable size nut bolts and washer etc complete all as specified and directed.

S&F in repair of PP-R gate valves(brass inlet) as per requirement of size 90 mm OD complete all as specified and directed.

Supply only (Calcium based granular disinfectant for chlorination for water treatment, in Bbsr under AGE E/M GOS, GE (I) GOS in plastic drums fof 45 kg/each drum.

Taking down old unserviceable mild steelS & F Miled steel framed work such as angles,flat iron, grills,gratings,etc.with ends of bars shouldered and/or riveted or forged into spikes,framed guard bar,barred iron doors,ladder,framed balusters,ralling frame work etc including two coat of synthtic ename paint over a coat of red oxide in steel surface and similar work conforming to Fe-410-O or Fe-310-O complete all as specified and as directed .

Supply and fix in replacement of MCB TP 40 amps, complete all as specified and as directed .

S&F 3-layer PP-R polypropylene random copolymer concealed pipe (PN 16/SDR 7.4) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings, floors or in trenches etc of size 90 mm OD complete all as specified and directed. Make : SFMC or equivalent in approved by E-in-C

Supply only alum crystal for water sedimentation complete all as specified and approved by GE.

Cleaning of over head water storage tank of capacity 20000 gallons by dewatering existing water and removing all dirt silt vegetation formation on side walls/staire inside and bottom cleaning with wire brush to remove settled materials and cleaning with clean water and applying lime washing two coats inside the tank including re-writing the date of cleaning capacity of the tank/sump with synthetic enamel white paint on black base complete (ii) Cleaning the surrounding area of the reservior to a distance of 2 mtrs circumferance including cutting of grass digging out roots filling holes and levelling around and removing waster materials to a distance not exceeding 20 mtrs complete and all as directed.

Flushing the bore well for flushing of silt, fine sand etc by air compressor of suitable capacity and pumping out turbidity till obtaining clear water all as directed and as per site requirement.

Supply and fix in replacement of electronic adjustable Cyclic timer 0-30 Seconds duration sutable to existing submersible motor panel boardcomplete all as specified and as directed .

Supply and fix in replacement of dry Run Guard and overload protection with phase failure relay sutable to existing submersible motor panel board complete all as specified and as directed .

S&F foot valve 50/63 mm dia CI/GI with complete fittings including taking out old unsv complete all as specified and directed.

Supply and fix in replacement of Push Button sutable to existing submersible motor panel board complete all as specified and as directed

Supply and fix in replacement of Volt meter sutable to existing submersible motor panel board complete all as specified and as directed

Supply and fix in replacement of Ammeter sutable to existing submersible motor panel board complete all as specified and as directed

Supply and fix in replacement of Phase Monitoring Divice 440 volt 3 phase sutable to existing submersible motor panel board complete all as specified and as directed

Supply and fix in replacement of Voltage Monitoring Divice 440 volt 3 phase sutable to existing submersible motor panel board complete all as specified and as directed .

S&F in repair DOL Starter for submersible pump set type MN -16 and relay range 9-15 Amps with contactor complete all as specified and as directed.

Supply and fixing desert cooler electric driven (single phase), plastic/PVC body having nominal air flow capacity of 5000 Cum per hour (or nearest size complete all as specified and directed. Make : LG/Bajaj

Each Job

Replacement of impeller upto 7.5 HP submersible pump set, complete all as specified and directed.

Replacement of old rusted GI Column Pipe heavy grade of size 50 mm dia in pieces of 3.3 metre long , lathe m/c threaded both ends in the bore/open wells complete all as specified and directed.

Taking down old unserviceable and Supply and Fixing Centrifugal pumpset ,electric driven,Three phase suitable for suction and delivery pipe line size 80 X 80 mm ,head 44 mtr,16 LPS of 15 HP (11 KW), complete fitting and testing ,alignment of motor complete all as seci

fied and as directed. Make :-Kirlosker/CRI or Equivalent in other approved make. Note :-The unserviceable pump set will be deposited to the AGE E M store yard.

Taking down from existing location and refixng after maintenance and servicing of window type / split type AC of capacity 1.5/2 TR by cleaning condensing coil, cooling unit, blower motor, oiling & greasing of moving parts and testing by soap solution, brush and air blower, tightening nuts, bolts screws and general check-up (Electrical system) of complete unit complete all as specified and directed.

Dismantling the UNSV compressor from 1.5 ton capacity window/ split AC, excluding copper tubing , replace by S&F of same capacity new compressor (replacement basis and also site requirement suitable for invertor type OD unit) with first filling refrigerat gas and fixing on position with nuts, bolts, rubber grommet and washers, connecting copper tubing by welding/ flare nuts complete all as specified and directed.

S&F in replacement blower motor suitable for 1.5 ton window type AC, single phase 230 Volts with replacement of bushes including testing and commissioning complete all as specified and directed.

M&L for fan step regulator, 120, W-2 module complete Including taking down unserviceable ones all as specified and directed.

S&F in replacement air filter pad suitable for any type AC 1.5/2.0 ton capacity complete all as specified and directed.

Carrying out pressure leak test for detecting leak in condensing unit, refrigerant pipe and repairing the leak by welding or brazing of condensing unit and refrigerant pipe, putting under pressure for leak checking after repairs for 72 hours of leak pipe including transporting & carrying out T&P required at site for work of 1.5/2.0 ton capacity any type of AC complete all as specified and directed.

Each job

Flushing out by N-2 and CTC, vaccination and supply & charging of refrigerant gas into the system for 1.5 / 2.0 ton capacity any type AC complete all as specified and directed. NOTE: Cost of Strainer & 0.60 size cappliary incuded in the rate

Dismantling of defective cooling indoor unit of 1.5/2 TR capacity split AC complete with connected piping and corded remote control etc & re-fixing on wall/floor after carrying out repairs and servicing and making good the disturbed surfaces as per the existing complete all as specified and directed.

Each job

Each job

Dismantling of defective condensing unit of 1.5/2 TR capacity split AC complete with connected lead and iron stand etc and re-fixing on roof/floor after necessary repairs and servicing complete all as specified and directed.

S&F in replacement suction copper pipe line heavy ½” dia with foam insulation and flair nuts from indoor to out door unit of split type AC 2.0 TR capacity complete all as specified and directed.

Each Job

Dismantling of defective cooling indoor/outdoor unit of 1.5 Ton capacity of split type air conditioner complete with connected piping and corded remote control etc and refixing on wall/floor after carrying out repairs and servicing and making good the disturbed surfaces all as specified and directed by Engr-in-Charge.

S&F in replacement starting capacitor 80-100 MFD suitable for 1.5/2.0 ton air conditioner complete all as specified and directed.

Dismantling the UNSV defective indoor unit of 1.5 TR capacity split type AC, S&F indoor unit of same capacity of any make with blower motor, front grill and connecting the copper tubing by brazing detecting leak and rectifying the same and installing the same complete all as specified and directed.

Dismantling the UNSV outdoor unit of 1.5 TR capacity split type AC, S&F outdoor unit of same capacity of any make fitted with condensing unit and motor but with compressor and install the same by charging refrigerant gas complete all as specified and directed.

Supply and install hi wall split unit indoor and outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better in door air quailty with minium 5 star and EER 3.2 of capacity 1.5 ton including connecting and testing complete allas specified and as directed by Engr-in-charge.

S&F automatic Voltage stebliser single phase,50 HZ ,230 volts +/- 5% ,90 to 250 rating 4KVA complete for 1.5TR AC all as specified and directed.make:V-guard/Shakti or equivelent

Removing the UNSV water purifier from its position and opening the purifier, cleaning the same and replacement of the damage parts like new candle, 3 in 1 cartridge set and assembling the same after testing and fitting complete all as specified and directed.

Check U/S AC cordless remote controlled hand set and supply and replace new hand set as existing make complete all as specified and directed

Supply and replacement LED Indicator lamp rectangular/round type as required at site all as specified and directed.

S&F in replacement starting relay assembly including coat & cover and clips suitable for AC 1.5/2.0 ton window/ spilt type air conditioner complete all as specified and directed

S&F single pole and neutral enclosure with a two pin and earth plug socket 240 volt with one MCB DP ‘C’ series rating 20 to 32 Amp incl taking down the old USNV complete all as specified and directed.

S&F Electric water heater storage type(Geysers) of capacity 25 ltrs complete with fitting and fixtures five star rating metal body complete all as specified and directed.

S&F in replacement motor for water fiiter any make/size as per sample all as specified and directed.

S&F in replacement adopter for water fiiter any make/size as per sample all as specified and directed.

Supply ,installation commissioning of water cooler partially stainless steel electric driven single phase having approx storage capacity of 80 ltrs and nominal cooling capacity of 40 ltrs per hour complete all as specified and directed.

Dismantling of water cooler of 40-80 ltrs storage capacity from its position, taking out water from its water tank cleaning of water tank by washing powder and with fresh water externally and internally and storage tank without disturbing the existing position and connecting the water line including GI fitting when required and PVC pipe connection complete all as specified and directed by the Engr-in-Charge.

Supply and replacement heating unit (element) ISI marked of 1500 watts triangular/circuler s

hape or as per sample required in existing geysers installed at site including rubber washers complete all as specified and directed.

Supply and replacement PVC threaded tough rubber flexible pipe/tubing of 15 mm size with PTMT nuts at both end 300/450 mm long for geysers inlet/ outlet connections, all as specified.

Dismantling of defective starting capacitor S&F new capacitor 60 - 80 Mfd complete all as specified and directed.

Dismantling of UNSV old defective & burnt compressor for 40/80 ltrs capacity of water cooler including disconnecting suction / discharge copper tubing replacing by S&F new compressor and fixing on position with nuts, bolts, rubber gromote and washers, connecting copper tubing by welding / flame nuts, detecting leak and repairs if any, complete all as specified and directed.

Taking out defective gasket of storage water cooler top cover and supply & fixing new rubber gasket of existing size all as specified and directed by Engr-in-Charge.

S & F (in replacement) condensing coil suitable for 40-80 ltrs capacity water cooler of any make all as specified and directed.

S&F in replacement capacitor 4 Mfd suitable for blower motor of water cooler complete all as specified and directed.

S&F (in replacement) thermostat suitable for water cooler any capacity all as specified and directed.

Supply and replacement of compressor including disconnecting suction/ discharge copper tubing of water cooler including taking out old unsv and fixing on position with nuts, bolts, rubber gromote and washers, connecting copper tubing by welding/flame nuts, detecting leak and repairs if any, complete all as specified and directed .

Flushing out by Nitrogen and CTC, vacuum and supply charging of refrigerant gas as existing into the system for water cooler , complete all as specified and directed .

Removing defective condensing fan motor of water cooler single phase 230 V 50 HZ and opening and replacing of Blower motor and cutting out the burnt wiring and cleaning the slots of rotor and rewinding of the same with the existing size of super enamelled copper winding wire including insulation, varnishing, greasing, replacement of bushes, reassembling including testing and commissioning , complete all as specified and directed .

S&F water pump for desert cooler any make and size as per sample , complete all as specified and directed .

S&F in replacement oil filter suitable for 7.5 to 15 KVA DG set capacity as per existing size complete all as specified and directed

S&F in replacement diesel filter suitable for 7.5 to 15 KVA DG set capacity as per existing size complete all as specified and directed

S&F in replacement fan belt suitable for DG set of 7.5 to 15 KVA capacity complete all as specified and directed ,

M&L for draining out oil from engine of DG set of any capacity, cleaning the oil chamber, supply and filling of lubricant in replacement GENSET OIL multi-grade 20W40 complete all as specified and directed.

S&F in replacement of coolant suitable for DG sets complete all as specified and directed.

Taking down Unseviceable Engine Relay unit of DG set of any capacity and S&F the same as existing make and capacity complete all as specified and directed.

Routine/general check-up by one skilled technician, complete testing of DG set once in every qtrly at GMS complete all as specified and directed. Note:(minimum maintenance cost up to Rs 300 deemed included in unit rate)

Supply and fixing copper strip 20 x 3mm fixed with porcelain saddles not exceeding 400mm spacing and fixing screws for roof condductors and down conductors above ground or fixed on wall, roof all as specified and as directed by Engineer-in-Charge.

S&F in replacement of battery Copper Lead Cable with brass thumble complete all as specified and directed

Dismantlling the unserviceable hose pipe with tightning clamps S&F in replacement of the same size hose with clamp complete all as specified and directed

Draining the fuel from existing diesel tank in a seprate empty container and disconnecting from the DG set and cleaning fuel tank internally for removing sludge and testing to prevent the leakage if any and reconnecting the same in original position for the capacity of DG set 7.5 KVA to 15 KVA complete all as specified & directed.

Replacement of existing unsv air cleaning element inner with necessary 'O' rings for the DG sets ofcapacity 7.5 KVA to 15 KVA as that of existing make and model .

Dismantling radiator of 7.5 to 15 KVA DG Set complete from engine mounting frame, opening and clearing with use of acid, to clear the choked tubes, over hauling of the same, arresting the leakages with soldering, replacing the gasket including replacement of water pump seal, lub oil filter, corrossion resistor filter, reefixing back the radiator in the original position, reconnecting back and testing complete all as specified & directed.

Taking down unserviceable self-starter 12 volts from engine,dismantling and opening of stater and armature,replace the wornout carbon brush,pinion,ignition coil bearing,bushing, including servicing, varnishing of stater after repairing assembling,refixed to same position complete all as specified & directed.

Dismantling and taking out unserviceable dynamo/alternator of charging unit of battery 12 volts including opening and seviceing of field coil of stator,rotor unit, replace wornout carbon brush,bushes, Bentex pinion complete all as specified and directed.

Supply and replacent GI pipe light grade with all fittings laid in trenches/walls of size 40 mm dia all as specified and directed by Engr-in-Charge

Supply and fixing Air terminal single pointed aluminum rod 12mm dia and 300mm long, mounted on 40mm bore light grade GI pipe, embedded in mass concrete all as specified and as directed.

Material and labour for test point terminal block made of gun metal or phosphorus bronze of size 75 x 75 x 25mm with drilled holes and screws including 3 x 2 Nos, 8mm dia, 25mm long hexagonal head screw of brass with nuts complete duly fitted, grouted on 02 Nos., MS flat 25 x 5mm, fabricated with suitable shape and size and fixing or 02 Nos porcelain saddles for mounting of terminal block complete all as specified and as indicated.

Supply and replacement of Automatic voltage regulator (AVR) suitable for DG Set 15 KVA, complete all as specified.

Supply and fixing street light fitting LED type 25 Watt new generation in aluminium PDC housing, toughened glasscover with IP 66 protection complete in all respect with GI tubing 25mm/40mm dia, mounting bracket with its clamp incl two coats of synthetic enamel paint over a coat red oxide primer and with all accessories, incl connecting of copper conductor cable of size 1.5 sq mm 3 core cable from fitting to junction box/conductor to street light as suitable on site, testing & commissioning complete all as specified and directed. Make : Surya or equivalent in Havells/Philips.

M & L for welding/brazing of existing earth strip connections complete for improvement of earth pits, pouring of salted water, repair to earth pit chamber with necessary earthwork, PCC, plastering, painting, replacement of funnel with wire mesh and earth pit chamber cover for existing improvement of existing earth pits all as specified and as directed.

Each Set

Supply and replacement of lead acid battery 75 Amp, 12 Volt, complete all as specified.

Supply and fixing LED flood light 200 watt Lumos II new generation LED with high luminous efficacy of 120 lm/w protected to IP-66 with front toughened glass complte in all respect with GI tubing reqd in site, mounting bracket with its clamp incl two coats of synthetic enamel paint over a coat red oxide primer and with all accessories, incl connecting of with copper co

nductor of size 2.5 sq mm 3 core with fixing arrangement suitable on site, testing & commissioning complete incl taking down old unsv any type and make all as specified and directed.

Supply and fixing street light fitting LED type 90 Watt new generation in aluminium PDC housing, toughened glasscover with IP 66 protection complete in all respect with GI tubing 40mm dia, mounting bracket with its clamp incl two coats of synthetic enamel paint over a coat red oxide primer and with all accessories, incl connecting of with copper conductor of size 1.5 sq mm 3 core cable from fitting to junction box/conductor to street light as suitable on site, testing & commissioning complete all as specified and directed.

Supply and fixing decorative LED post top lantern luminaire with milky diffuser and painted aluminium deflector E-Top with low glare optical design acrylic diffuser complete with connecting of suitable size of wire incl taking down old unsv all as specified and directed by Engr-in-Charge.

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 6 Sqmm multi -strand copper conductor drawing in PVC casing caping with 6 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as directed. Note : two run 6sqmm and one run of earth wire 6 sqmm and PVC conduit will be measured as one length.

Supply and fix Sheet metal enclosure for DB’s suitable for MCBs of single pole and neutral12 way (Double door) with 200 amp rated bus bar all as specified and directed.

M&L for rewinding the ceiling fan any make 1200/1400mm sweep and any size with super quality copper conductor adequate winding wire of existing size complete all as specified and directed.

Supply and fix LED Lamp pin type 9 watt all as specified and directed by the Engineer-In-charge.

Supply and fixing 5 star rating Ceiling Fan 1200 mm sweep with blade, down rod complete all as specified and directed.

S&F MCB SP up to 40 Amp, 240 volt all as directed.

Material and labour for PVC rectangular block of size 25 cmx20cmx5cm depth, closed recessed 3mm thick plastic laminated sheet complete all as specified

S & F LED light fitting 1 x 10 Watt Alumnium batten type, indoor decorative PC housing extruded Al LED battens with extruded aluminium housing and integrated LED driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size incl taking down the old USNV complete all as specified and directed

S &F Energy efficient LED integrated batten suitable for indoor applications tube light fitting 1x 20 Watt 4 FT complete all as specified and directed.

S&F Isolator DP 40A, 240 volts all as specified and directed by Engr-in-Charge.

Supply and fix Sheet metal enclosure for DB’s suitable for MCBs of single pole and neutral 4 way (Double door) with 200 amp rated bus bar all as specified and directed.

Supply and fix Sheet metal enclosure for DB’s suitable for MCBs of single pole and neutral 8 way (Double door) with 200 amp rated bus bar all as specified and directed.