Construction of Composite Regional Center (CRC) at Chhatarpur, Madhya Pradesh.

GRAND TOTAL OF DSR AND NDSR 22,45,49,621.00

consolidating each deposited layer by ramming and watering, lead up to

50 m and lift upto 1.5 m.

Excavating, supplying and filling of local earth (including royalty) by

mechanical transport upto a lead of 5km also including ramming and

watering of the earth in layers not exceeding 20 cm in trenches, plinth,

sides of foundation etc. complete.

Extra for every additional lift of 1.5 m or part thereof in excavation /

banking excavated or stacked materials.

Clearing grass and removal of the rubbish up to a distance of 50 m

outside the periphery of the area cleared.

Supplying chemical emulsion in sealed containers including delivery as

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

7.1 2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Litr 234.75 521.00 122304.75

Treatment of soil under existing floors using chemical emulsion @ one

litre per hole, 300 mm apart including drilling 12 mm diameter holes

and plugging with cement mortar 1 :2

(1 cement : 2 Coarse sand) to match the existing floor:

With Chlorpyriphos E.C. 20% with 1%

TOTAL EARTH WORK 5941490.59 0.00

B 4 CONCRETE WORKS

Providing and laying in position cement concrete of specified grade

10 4.1 excluding the cost of centering and shuttering - All work up to plinth

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources :

10.1 4.1.8 8 graded stone aggregate 40 mm nominal size derived from natural Cum 6812.00 281.89 1920248.30

Providing and laying damp-proof course 40mm thick with cement

concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural

sources : 4 graded stone aggregate 12.5mm nominal size derived from

natural sources)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1

cement : 3 coarse sand (zone-III) derived from natural sources : 6

graded stone aggregate 20 mm nominal size derived from natural

sources) over 75mm thick bed of dry brick ballast 40 mm nominal size,

well rammed and consolidated and grouted with fine sand, including

necessary excavation, levelling & dressing & finishing the top smooth.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and laying cement concrete in retaining walls, return walls,

walls (any thickness) including attached pilasters, columns, piers,

abutments, pillars, posts,

struts, buttresses, string or lacing courses, parapets, coping, bed blocks,

13 4.2.2 anchor blocks, plain window sills, fillets, sunken floor etc., up to floor Cum 10357.55 35.00 362514.25

five level, excluding

the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½

coarse sand (zone-III) derived from natural sources : 3 graded stone

aggregate 20 mm nominal size derived from natural sources).

TOTAL (Carried Over to Summary of Civil Works) 2547882.00 0.00

C 5 REINFORCED CEMENT CONCRETE WORK

Centering and shuttering including strutting, propping etc. and removal

14.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sqm 392.15 589.68 231243.01

Walls (any thickness) including attached pilasters, butteresses,plinth

and string courses etc.

14.3 5.9.20 Suspended floors, roofs, landings, balconies and access platform. Sqm 1028.40 4455.00 4581522.00

14.4 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 736.40 1930.86 1421885.30

14.5 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. Sqm 961.30 2642.98 2540692.83

14.6 5.9.7 Stairs, (excluding landings) except spiral-staircases. Sqm 764.95 531.00 406188.45

Reinforcement for R.C.C. work including straightening, cutting, bending,

15 5.22 placing in position and binding all complete upto plinth & above plinth

15.1 5.22.6 Thermo-Mechanically Treated bars. kg 107.85 305836.33 32984448.24

Providing and laying in position machine batched and machine mixed

design mix M-30 grade cement concrete for reinforced cement concrete

work, using cement content as per approved design mix, including

pumping of concrete to site of laying but excluding the cost of centering,

shuttering, finishing and reinforcement, including admixtures in

recommended proportions as per IS: 9103 to accelerate, retard setting

of concrete, improve workability without impairing strength and

durability as per direction of Engineer-in-charge.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

(Note :- Cement content considered in this item is @ 330 kg/Cum.

Excess/less cement used as per design mix is payable/recoverable

16.1 5.33.1.2 All works upto plinth level. Cum 9655.70 749.92 7241002.54

16.2 5.33.2 All works above plinth level upto floor V level. Cum 10011.35 1328.45 13299577.91

Extra for providing richer mixes at all floor levels. Note:- Excess/less

4 5.34 cement over the specified cement content used is payable /recoverable

Providing M-30 grade concrete instead of M-25 grade BMC/ RMC. (Note:-

Cement content considered in M-30 is @ 340 kg/cum)

Providing M-35 grade concrete instead of M-25 grade BMC/RMC. (Note :

ii 5.34.2 Cum

Cement content considered in M-35 is @ 350 kg/ cum)

Add for using extra cement in the items of design mix over and above

5 5.35 Quintal

the specified cement content therein.

D 6 BRICK WORK

Providing and laying autoclaved aerated cement blocks masonry with

100 mm thick AAC blocks in super structure above plinth level up to

17 6.38 floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate Cum 10195.45 711.72 7256305.67

includes providing and placing in position 2 Nos 6 mm dia M.S. bars at

every third course of masonry work.

Brick work with common burnt clay machine moulded perforated

bricks of class designation 12.5 conforming to IS : 2222 in exposed

brick work including making horizontal and vertical grooves 10 mm

wide 12mm deep complete in cement mortar 1:6 (1 cement : 6 coarse

Brick work with common burnt clay machine moulded perforated

modular bricks of class designation 12.5 conforming to IS : 2222 in

17.2 6.31.1. exposed brick work including making horizontal and vertical grooves 10 Cum 7032.05 71.17 500471.00

mm wide 12mm deep complete in cement mortar 1:6 (1 cement : 6

coarse sand).From ground level upto plinth level

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Brick work with non modular fly ash bricks conforming to IS:12894,

18 6.34 class designation 10 average compressive strength in super structure

above plinth level up to floor V level in :

18.1 6.34.1 Cement mortar 1:4 (1 cement : 4 coarse sand) Cum 8962.35 845.67 7579191.42

SH-7 Cladding work

Stone tile work for wall lining upto 10 m height with special adhesive

over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand),

including pointing in white cement with an admixture of pigment to

matchthe stone shade.

19.1 7.38.1.1 Granite stone of any colour and shade sqm 3094.55 547.35 1693801.94

Providing & fixing in position Phenol bonded Bamboowood wall

cladding at all height with planks of sizes 10mm thick, minimum

1800mm length and minimum 100 mm wide, in approved colour,

texture and finish, having Performance Appraisal Certificate (PAC)

issued by Building Materials & Technology Promotion Council (BMTPC),

with necesasary profiled edges fixed with 40mm SS screws 5 nos in each

tile to frame work made of second class teak wood of size 20x15 mm in

20 26.3 centre of each tile and bottom and top of work height, 40x15mm placed sqm 6283.85 89.50 562404.58

at ends of each tile. The cladding shall be laid over backlayment of 1.00

mm thick expanded polyethylene foam of density 40kg/cum in two

layers, first layer on wall surface before fixing wooden frame and

second layer on frame under cladding. The bamboowood planks shall

have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf.

with Eco friendly UV coating, all complete as per direction of the

Engineer in-charge

SH-8 MARBLE & GRANITE WORK

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and fixing 18 mm thick gang saw cut, mirror

polished,premoulded and prepolished, machine cut for kitchen

platforms, vanitycounters, window sills, facias and similar locations of

required size,approved shade, colour and texture laid over 20 mm thick

base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with

white cement,mixed with matching pigment, epoxy touch ups, including

rubbing, curing,moulding and polishing to edges to give high gloss finish

etc. completeat all levels.

8.2.2 Granite stone slab colour black, Cherry/Ruby red

Providing edge moulding to 18 mm thick marble stone counters,

22 8.3 Vanities etc., including machine polishing to edge to give high gloss

finish etc.complete as per design approved by Engineer-in-Charge.

Extra for fixing marble /granite stone, over and above corresponding

23 8.4 basic item, in facia and drops of width upto 150 mm with epoxy resin RM 568.55 28.50 16203.68

based adhesive, including cleaning etc. complete.

Extra for providing opening of required size & shape for wash basins /

kitchens sink in kitchen platform, vanity counters and similar location in

24 8.5 marble / Granite /stone work including necessary holes for pillar taps Nos 978.70 18.00 17616.60

etc. including moulding, rubbing and polishing of cut edges etc.

E 9 WOOD AND P.V.C. WORK

Providing wood work in frames of doors, windows, clerestory windows

and other frames, wrought framed and fixed in position with hold fast

lugs or with dash fasteners of required dia & length ( hold fast lugs or

dash fastener shall be paid for separately).

25.1 9.1.1 Second class teak wood Cum 142949.70 2.22 317426.60

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and fixing ISI marked flush door shutters conforming to IS :

2202 (Part I) decorative type, core of block board construction with

26 9.2 frame of 1st class hard wood and well matched teak 3 ply veneering

with vertical grains or cross bands and face veneers on both faces of

35 mm thick including ISI marked Stainless Steel butt hinges with

necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm

27 9.23 minimum depth on all edges of flush door shutters (over all area of door Sqm 462.35 248.85 115055.80

shutter to be measured).

Providing and fixing wooden moulded beading to door and window

28 9.40.1 frames with iron screws, plugs and priming coat on unexposed surface

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to

frame with 10 mm diameter bolts, nuts and wooden plugs and

embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement :

3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing aluminium sliding door bolts, ISI marked anodised

(anodic coating not less than grade AC 10 as per IS : 1868), transparent

or dyed to required colour or shade, with nuts and screws etc. complete

Providing and fixing aluminium tower bolts, ISI marked, anodised

(anodic coating not less than grade AC 10 as per IS : 1868 ) transparent

or dyed to required colour or shade, with necessary screws etc.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and fixing aluminium handles, ISI marked, anodised (anodic

32 9.1 coating not less than grade AC 10 as per IS : 1868) transparent or dyed

to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked,

anodised (anodic coating not less than grade AC 10 as per IS : 1868)

transparent or dyed to required colour and shade, with necessary

screws etc. complete.

33.1 9.101.1 Single rubber stopper Each 39.60 112.00 4435.20

Providing and Fixing M.S Shaft Door Including Frame 50x50x5 mm thick

angle Frame and shutter fabricated from 16 gauge GI Sheet final finish

with powder coating. Also fixing Floated Glass size 250x450x6mm thick

with all accessories like Hinges/Lock/Rubber Beading and Handle

Providing and fixing 50 mm thick glazed fire resistant door shutters of

60 minutes fire rating conforming to IS:3614 (Part-II), tested and

certified as per laboratory approved by Engineer-in-charge, with

suitable mounting on door frame, consisting of vertical styles, lock rail,

top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG

G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR

insulation material and fixing with necessary stainless steel ball bearing

hinges of approved make, including applying a coat of approved fire

resistant primer etc. all complete as per direction of Engineer-in-charge

(panneling to be paid for separately).

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and fixing glazing in fire resistant door shutters, fixed panels

& partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet

(zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with

M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm

c/c , including applying a coat of approved fire resistant primer/

powder coating of not less than 30 micron on G.I. beading, & special

ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC

2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge

with glass of required thickness having 60 minutes of fire resistance

both integrity & radiation control (EW60) and minimum 20 minutes of

insulation (EI20). The manufacturer have to give test

report/certification of fire glass and the glass should have the stamp

showing the value of E, EW & EI. The glass shall be tested in approved

NABL accredited lab

or by any other accreditation body which operates in accordance with

ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and

calibration scopes shall be eligible. The maximum glazing size shall

not be more than 1100x2200 mm (w x h) or 2.42 sqm.

Providing and fixing panic bar / latch (Double point) fitted with a single

body, Trim Latch & Lock on back side of the Panic Latch of reputed

brand and manufacture to be approved by the Engineer- in- charge, all

38 NDS R01 12MM THICK COMPACT LAMINATE WC CUBICLE

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and fixing Toilet cubical(of following standard dimension

which includes 600mm door size width) made up of thermosetting

resign treated high pressure ,self supporting decorative compact

laminates with permanently incorporate anti-bacterial agents(under JIS

Z2801:2000 certification) during manufacturing .Compact board should

NDSR be resistance to water immersion through permissible increase on

thickness and mass <0.60% and board density >1.35kg/cm3 and

fulfilled the criteria of green guard gold certification and manufactured

under EN438-2&3:2005 standard. 12mm thick compact board should

be Moisture resistant, Impact resistant, termite resistant ,Scratch

resistant ,Weather and climatic shock resistant.

Finish of compact laminates should be suede finish which includes door,

pilasters and intermediate panels finished with approved

texture/shades as per IS2046 and fulfilled the criteria of fire retardant

under BS-476/97 and EN438-6 with classification of BS1D0 standard.

Pilaster to be supported with SS(grade316) adjustable foot and

intermediate panels will attached to the wall with the help of approved

SS(grade316) channels and all required hardware, made up of stainless

steel as per manufacturer’s specification.. Door knob, gravity

hinges,Thumb turn locksets with occupancy indicators ,coat hooks with

door stoper , U channel, top rail with corner connector, adjustable

foot/pedestal,Rubber noice deafening tape, screw & wall plugs should

be approved under the instruction of Engineer-in-charge.

The top fitting should consist of SS round top rail which will get fixed

with pilaster, with SS panel tube holder ,SS corner bend (connected with

top rail ) will be use in corner of cubical in absence of brick wall, SS wall

fixing is used only on the wall which will hold the SS top rail. All screw

will of 304 grade in SS with stain finish. All pilasters are supported by SS

bottom cladding . The base of the stainless steel bottom cladding will be

anchored to the floor with a clearance height upto 150 mm.Finish and

colour of Toilet cubical should be approved under guidance of engineer-

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Toilet cubical with standard dimension of

2025mm(H)x1000mm(W)x1500mm(Depth), which includes 600mm

door size width or as per drawing. ('L') shape, overall size may vary,

please quote as per drawings.

Providing and fixing factory made uPVC white colour sliding glazed

window upto 1.50 m in height dimension comprising of uPVC multi-

chambered frame with in-built roller track and sash extruded profiles

duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section

made from roll forming process of required length (shape & size

according to uPVC profile), appropriate dimension of uPVC extruded

glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile,

zinc alloy (white powder coated) touch locks with hook, zinc alloy body

with single nylon rollers (weight bearing capacity to be 40 kg), G.I

fasteners 100 x 8 mm size for fixing frame to finished wall and

necessary stainless steel screws etc. Profile of frame & sash shall be

mitred cut and fusion welded at all corners, including drilling of holes

for fixing hardware's and drainage of water etc. After fixing frame the

gap between frame and adjacent finished wall shall be filled with

weather proof silicon sealent over backer rod of required size and of

approved quality, all complete as per approved drawing & direction of

Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon

sealent shall be paid separately). Variation in profile dimension in

higher side shall be accepted but no extra payment on this account shall

Two track two panels sliding window made of (small series) frame 52 x

44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm

and single glazing bead of appropriate dimension. (Area of window upto

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and fixing factory made uPVC white colour sliding glazed

window above 1.50 m in height dimension comprising of uPVC multi-

chambered frame with in-built roller track and sash extruded profiles

duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section

made from roll forming process of required length (shape & size

according to uPVC profile), appropriate dimension of uPVC extruded

glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash

adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder

coated) handle on one side of extreme panel along with zinc plated mild

steel multi point locking having transmission gear with keeps, zinc alloy

(white powder coated) touch lock with hook (if required for wire mesh

panel), stainless steel (SS 304 grade) body with adjustable double nylon

rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm

size for fixing frame to finished wall and necessary stainless steel

screws etc. Profile of frame & sash shall be mitred cut and fusion welded

at all corners, including drilling of holes for fixing hardware's and

drainage of water etc. After fixing frame the gap between frame and

adjacent finished wall shall be filled with weather proof silicon sealent

over backer rod of required size and of approved quality, all complete as

per approved drawing & direction of Engineer-in-Charge. (Single /

double glass panes, wire mesh and silicon sealent shall be paid

separately). Variation in

profile dimension in higher side shall be accepted but no extra payment

on this account shall be made.

Two track two panels sliding window made of (big series) frame 67 x 50

mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and

single glazing bead / double glazing bead of appropriate dimension.

(Area of window above 2.50 sqm upto 4.00 sqm.)

41 MR Modular Kitchen setup including storage, fridge, chimney etc. and others LS 350000.00 1.00 350000.00

Providing and fixing zinc alloyed (white powder coated) touch lock for

uPVC sliding window with necessary screws etc. complete.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

TOTAL (Carried Over to Summary of Civil Works) 3712141.24 1222141.40

F 10 STEEL WORK

Steel work welded in built up sections/ framed work, including cutting,

43 10.25 hoisting, fixing in position and applying a priming coat of approved steel

primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and

Steel work in built up tubular (round, square or rectangular hollow

tubes etc.) trusses etc., including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer, including welding and

bolted with special shaped washers etc. complete.

44.1 10.16.1 Hot finished welded type tubes Kg 194.40 1000.00 194400.00

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing,

and making curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c fixing the railing

with necessary accessories & stainless steel dash fasteners , stainless

steel bolts etc., of required size, on the top of the floor or the side of

waist slab with suitable arrangement as per approval of Engineer-

(for payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts, fasteners

TOTAL (Carried Over to Summary of Civil Works) 2777074.00 0.00

G 11 FLOORING WORK

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and laying Polished Granite stone flooring in required design

and patterns, in linear as well as curvilinear portions of the building all

complete as per the architectural drawings with 18 mm thick stone slab

over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4

46 11.56 coarse sand) laid and jointed with cement slurry and pointing with

cement slurry admixed with pigment of matching shade including

rubbing , curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge.

Polished Granite stone slab of all colour and texture except Black,

Cherry/Ruby Red

46.2 11.24 Extra for pre finished nosing to treads of steps of marble / granite stone. Rmt 719.90 710.40 511416.96

Extra for marble / granite stone flooring in treads of steps and risers

using single length up to 2.00 metre.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to

IS : 15622 (thickness to be specified by the manufacturer ) of approved

make in all colours, shades except burgundy, bottle green, black of any

size as approved by Engineer-in-Charge in skirting, risers of steps and

dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse

sand) and jointing with grey cement slurry @ 3.3kg per sqm including

pointing in white cement mixed with pigment of matching shade

Providing and laying Ceramic glazed floor tiles of size 300x300 mm

(thickness to be specified by the manufacturer), of 1st quality

conforming to IS : 15622, of approved make, in all colours, shades,

49 11.38 except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of Sqm 1315.30 614.00 807591.57

cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey

cement slurry @ 3.3 kg/ sq.m including pointing the joints with white

cement and matching pigments etc., complete

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and laying Vitrified tiles in floor in different sizes (thickness

to be specified by the manufacturer) with water absorption less than

0.08% and conforming to IS:15622, of approved brand & manufacturer,

in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1

cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm

including grouting the joints with white cement and matching pigments

etc. The tiles must be cut with the zero chipping diamond cutter only .

Laying of tiles will be done with the notch trowel, plier, wedge, clips of

required thickness, leveling system and rubber mallet for placing the

tiles gently and easily Size of tile 600X600mm.

Grouting the joints of flooring/wall tiles having joints of 3 mm width,

using epoxy grout mix of 0.70 kg of organic coated filler of desired shade

(0.10 kg of hardener and 0.20 kg of resin per kg), including filling

/grouting and finishing complete as per direction of Engineer-in-charge.

Providing and laying Vitrified tiles in different sizes (thickness to be

specified by the manufacturer), with water absorption less than 0.08%

and conforming to IS: 15622, of approved brand & manufacturer, in all

colours and shade, in skirting, riser of steps, laid with cement based high

polymer modified quick set tile adhesive (water based) conforming to

IS: 15477, in average 6 mm thickness, including grouting of joints

(Payment for grouting of joints to be made separately).Size of Tile

Providing and laying machine cut, mirror polished, Italian Marble stone

flooring laid in required pattern in linear and Curvlinear portion of the

building in lay all complete as per architectural drawings, with 18 mm

thick stone slab laid over 20 mm (average) thick base of cement mortar

53 11.51 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry Sqm 6603.35 34.00 224513.90

@ 4.4 kg/sqm including pointing with white cement slurry admixed

with pigment to match the marble shade including rubbing, curing and

polishing etc. all complete as specified and as directed by the Engineer-

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

H 12 ROOFING WORK

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x

20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70

and initial emittance > 0.75 on waterproof and sloped surface of terrace,

laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4

coarse sand) and grouting the joints with mix of white cement & marble

powder in ratio of 1:1, including rubbing and polishing of the surface

upto 3 cuts complete, including providing skirting upto 150 mm height

along the parapet walls in the same manner.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse

55 12.21 sand : 4 stone aggregate 10 mm and down gauge), including finishing

with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

Making khurras 45x45 cm with average minimum thickness of 5cm

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400

micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse

sand) and a coat of neat cement, rounding the edges and making and

finishing the outlet complete.

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles

of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet

having galvanizing of 100 gms/sqm (both sides inclusive) and 20%

perforation area with 1.8 mm dia holes and having NRC (Noise

Reduction Coefficient ) of 0.5, electro statically polyester powder coated

of thickness 60 microns (minimum), including factory painted after

bending and perforation, and backed with a black Glass fiber acoustical

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and fixing mineral fibre false ceiling tiles at all heights of size

595X595mm of approved texture, design and pattern. The tiles should

have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%,

Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per

(BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-

Grid of hot dipped all round galvanized iron section of 0.33 mm thick

(galvanized @120 gsm) comprising of main T runners of 15x32 mm of

length 3000 mm, cross T of size 15x32mm of length 1200 mm and

secondary intermediate cross T of size 15x32 mm of length 600 mm to

form grid module of size 600x600 mm suspended from ceiling using

galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer

diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod

up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm,

spaced at 1200 mm centre to centre along main ‘T’. The system should

rest on periphery walls /partitions with the help of GI perimeter wall

angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed

to the wall with help of plastic rawl plug at 450 mm centre to centre &

40 mm long dry wall S.S. screws. The exposed bottom portion of all T-

sections used in false ceiling support system shall be pre-painted with

polyester baked paint, for all heights. The work shall be carried out as

per specifications, drawings and as per directions of the engineer-in-

With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC

59 12.45.1 Providing and fixing false ceiling at all height including providing and fixing offrame

made of special

sections, power

pressed from M.S. sheets andgalvanized with zinc coatin

TOTAL (Carried Over to Summary of Civil Works) 7875773.35 0.00

I 13 FINISHING WORK

60 13.4 12 mm cement plaster of mix :

61 13.5 15 mm cement plaster on rough side of single or half brick wall of mix :

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and applying plaster of paris putty of 2mm thickness over

plastered surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade,

having VOC (Volatile Organic Compound ) content less than 50 grams/

litre of approved brand and manufacture, including applying additional

coats wherever required to achieve even shade and colour.

13.83.2 Two coats Sqm

Supply and Fixing of GRC Jali (Glass Fiber Reinforced Conc) of Specified

Thickness and Design. Jaali Border:50-75mm thick Pattern:35m, Color

Beige Mold Size 1220x2440 mm design as per Mocup done and final

Approval and design as approved by Architect

TOTAL (Carried Over to Summary of Civil Works) 3618808.58 531531.00

ALUMINIUM WORKS

Providing and fixing 12 mm thick frameless toughened glass door

approved brand and manufacture, including providing and fixing top &

pivot & double acting hydraulic floor spring type fixing arrangement

necessary holes etc. for fixing required door fittings, all complete as per

of Engineer-in-charge (Door handle, lock and stopper etc.to be paid

Providing and fixing Toughned Glass Roof Covereng as per drawing and

Design the Alum Tubles Section shall be Paid Sepratliy

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and supplying aluminium extruded tubular and other

aluminium sections as per the architectural drawings and approved

shop drawings , the aluminium quality as per grade 6063 T5 or T6 as

per BS 1474,including super durable powder coating of 60-80 microns

conforming to AAMA 2604 of required colour and shade as approved by

the Engineer-in-Charge. ( The item includes cost of material such as

cleats, sleeves, screws etc. necessary for fabrication of extruded

aluminium frame work. Nothing extra shall be paid on this account). The

weight of aluminium extruded section shall be taken for purpose of

TOTAL (Carried Over to Summary of Civil Works) 234676.11 76160.00

M 22 WATER PROOFING

Providing and applying 2 parts polymer-modified flexible cementitious

Provide and install fountain equipment mechanical and electrical

package in accordance with the Tender Documents and architectural

drawings. Furnish all labor, materials, apparatus, tools, equipment,

transportation, temporary construction, and special or occasional

services as required to make a complete working fountain installation,

69 NDSR as shown on the drawings or described in these specifications. The work NOs 450000.00 1.00 450000.00

of this Section shall include, but not be limited to the following: Fountain

Display System including pumps, valves, and specialties (nozzles, pool

fittings, etc.) as hereinafter described, listed and shown on the drawings.

Fountain Electrical Control System including control panel, water level

and PLC controller

TOTAL (Carried Over to Summary of Civil Works) 0.00 2472969.60

STRUCTURAL GLAZING AND ALUMINIUM COMPOSITE PANEL

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing & fixing of fully fixed Structural Glazing of approved shade

designed in DGU (Double Glazed Unit) as per the elevation Section &

plan Drawings enclosed, fabricated out of Heavy Duty Aluminum

Extruded Profiles box section mullion and transom of (160mm x 50mm

x 2mm thick with 10mm long colar Mullion & Transom 86mm x 50mm x

2mm thick with 6mm thick long colar) with pure Polyester powder

coated 50-60 micron in

plain color as approved color and shade by the client or architect.

Consisting of Mullion vertical & horizontal section. Transom, and Vision

Panel Shutters suitable to Accommodate 24mm thick DGU Glass (6mm

thick toughened Glass + 12mm thick air gap + 6mm thick clear

toughened glass) as per approved color. DGU glass details:

Transmission-40%, External reflection 21%, Internal

reflection 13%, UV 12%, Solar factor 0.23

Anchoring/Bracing of the Structural Glazing to the RCC Beams/

Columns shall be done with Heavy Duty 6mm thick M.S. Brackets of

approved design, Galvanized / Pure Polyester plain color Powder

Coated. Two numbers of Brackets shall be on each beam. One designed

for expansion characteristic of the Mullion Aluminum Shims of various

required thickness shall be provided behind the brackets to adjust the

beam level variations possible at site, or extended brackets duly

designed shall be provided of required size as Per site requirements.

Weather silicon will be of approved make for structure support and for

weather proofing and double sided acrylic tape 2.3mm thick x 12mm /

6mm thick x 12mm foam tape.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Design supply & installation of suspended Spider Glazing system

designed to withstand the wind pressure as per IS 875 (Part-III). The

Suspended System held with Spider Fittings of SS-316 Grade Steel of

approved manufacturer with glass panel having 12 mm thick clear

toughened glass held together with SS- 316 Grade Stainless steel Spider

& bolt assembly with laminated glass fins 21 mm thick. The Glass fins

and glass panel assembly shall be connected to Slab/ beams by means of

SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom

using SS channel of 50x25x2mm using fastener & anchor bolts, non

staining weather sealants of approved make, Teflon/ nylon bushes and

separators to prevent bi-metallic contacts, all complete to perform as

71 25.8 per specification and approved drawings. The complete system to be sqm 9502.35 205.00 1947981.75

designed to accommodate thermal expansion & seismic movements etc.

The joints between glass panels (6 to 8 mm) and gaps at the perimeter

& in U channel of the assembly to be filled with non staining weather

sealant, so as to make the entire system fully water proof & dust proof.

The rate shall include all design, Engineering and shop drawing

including approval from structural designer, labour, T&P, scaffolding,

other incidental charges including wastage, enabling temporary services

all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS

channel laminated glass etc. all complete. For the purpose of payment,

actual elevation area of Glazing including thickness of joints and the

portion of Glass panel inside the SS channel shall be measured.

Providing and Fixing Acrylic letters with LED module back light

72 and sunboard( engilish and hindi) both languages as per direction Sq.inch. 11.00 500.00 5500.00

of engineer incharge.

Providing Cleaning & Pasting of Retro reflective tape 2”for

visibility during dark hours

Total of DSR & NDSR 1947981.75 12266592.90

2. Boundary wall

SH-1 EARTH WORK

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Earth work in Excavation by mechanical means (Hydraulic

excavator)/manualmeans over areas (exceeding 30 cm in depth, 1.5 m

74 2.6 in width as well as 10sqm on plan) including getting out and disposal of

excavated earth lead upto 50 m and lift upto 1.5 m, as directed by

Engineer-in-charge.

2.6.1 All kinds of soil Cum 177.50 563.76 100067.40

Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations etc. in layers not exceeding 20cm in depth,

consolidating each deposited layer by ramming and watering, lead up to

50 m and lift upto 1.5 m.

Excavating, supplying and filling of local earth (including royalty) by

mechanical transport upto a lead of 5km also including ramming and

watering of the earth in layers not exceeding 20 cm in trenches, plinth,

sides of foundation etc. complete.

4 CONCRETE WORKS

Providing and laying in position cement concrete of specified grade

77 4.1 excluding the cost of centering and shuttering - All work up to plinth Cum 6812.00 25.14 171274.12

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources :

77.1 4.1.8 8 graded stone aggregate 40 mm nominal size derived from natural

5 REINFORCED CEMENT CONCRETE WORK

Centering and shuttering including strutting, propping etc. and removal

78.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete.

78.2 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 736.40 283.68 208901.95

78.3 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. sqm 961.30 354.96 341223.05

Reinforcement for R.C.C. work including straightening, cutting, bending,

79 5.22 placing in position and binding all complete upto plinth & above plinth

79.1 5.22.6 Thermo-Mechanically Treated bars. Kg 107.85 17486.60 1885929.81

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and laying in position machine batched and machine mixed

design mix M-25 grade cement concrete for reinforced cement concrete

work, using cement content as per approved design mix, including

pumping of concrete to site of laying but excluding the cost of centering,

shuttering, finishing and reinforcement, including admixtures in

recommended proportions as per IS: 9103 to accelerate, retard setting

of concrete, improve workability without impairing strength and

durability as per direction of Engineer-in-charge.

80.1 5.33.1 All works upto plinth level.

80.2 5.33.2 All works above plinth level upto floor V level. Cum 9860.40 32.89 324269.11

Brick work with F.P.S. bricks of class designation 75 in superstructure

above plinth level up to floor V level in all shapes and sizes in :

81.1 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 9105.95 83.85 763522.98

82 13.12 18 mm cement plaster of mix :1:5 (1 cement: 5 coarse sand) sqm 537.45 2205.00 1185077.25

Finishing walls with Premium Acrylic Smooth exterior paint with

Silicone additives of required shade:

New work (Two or more coats applied @ 1.43 ltr/10 sqm over and

including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Steel work welded in built up sections/ framed work, including cutting,

hoisting, fixing in position and applying a priming coat of approved steel

primer using structural steel etc. as required. In gratings, frames, guard

bar, ladder, railings, brackets, gates and similar works

SH 16 ROAD WORK

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and fixing Glow studs of size 100x20 mm made of heavy

duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or

HIP (High impact polystyrene) or ABS having electronically welded

micro- prismatic lens with abrasion resistant coating as approved by

Engineer in charge. The glow stud shall support a load of 13635 kg

tested in accordance with ASTM D4280. The slope of retro- reflective

85 16.5 surface shall be 35 (+/-5) degress to base .The reflective panels on Nos 206.30 64.00 13203.20

both sides with at least 12 cm of reflective area up each side. The

luminance intensity should be as per the specification and shall be

tested as described in ASTM I: 809 as recommended in BS: 873

part 4 : 1973. The studs shall be fixed to the Road surface using the

adhesive conforming to IS, as per procedure recommended by the

manufacturer complete and as per direction of Engineer-in-charge.

Construction of granular sub-base by providing close graded Material

conforming to specifications, mixing in a mechanical mix plant at OMC,

carriage of mixed material by tippers to work site, for all leads & lifts,

86 16.78 spreading in uniform layers of specified thickness with motor

grader on prepared surface and compacting with vibratory power

roller to achieve the desired density, complete as per specifications and

directions of Engineer-in-Charge.

With material conforming to Grade-II (size range 53 mm

to 0.075 mm ) having CBR Value-25

Providing, laying, spreading and compacting graded stone aggregate

(size range 53 mm to 0.075 mm ) to wet mix macadam (WMM)

specification including premixing the material with water at OMC in for

all leads & lifts, laying in uniform layers with mechanical paverfinisher

in sub- base / base course on well prepared surface and compacting

with vibratory roller of 8 to 10 tonne capacity to achievethe desired

density, complete as per specifications and directions of Engineer-in-

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources :

88 4.1.8 8 graded stone aggregate 40 mm nominal size derived from natural

Road C.C pavment Cum 6912.00 210.00 1451520.00

Providing and laying 60mm thick faciory made cement concrete

interlocking Grass paver block of M -30 grade made by block making

machine with strong vibratory compaction, of approved size, design &

shape, laid in required colour and pattern over and including 50mm

thick compacted bed of coarse sand, filling the joints with line sand etc.

all complete as per the direction of Engineer-in-charge.

Providing and fixing roofing consist of 0.8 mm thick galvanized steel

deck sheet confirming to IS 277:1992 used as permanent shuttering

over which MS wire mesh 3mm laid at 100x100 mm grid including edge

90 26.65 trim covered with concrete. This metal deck will be supported on Sqm 1525.60 20.26 30908.66

structural steel beam with shear studs. (Structural steel like Beam,

column, joists etc. & concrete of different grade as per design will be

paid separately)

Steel work in built up tubular (round, square or rectangular hollow

tubes etc.) trusses etc., including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer, including welding and

bolted with special shaped washers etc. complete.

10.16.1 Hot finished welded type tubes Kg 194.40 745.00 144828.00

Providing and laying at or near ground level factory made kerb stone of

M-25 grade cement concrete in position to the required line, level and

curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand),

including making joints with or without grooves (thickness of joints

92 16.69 except at sharp curve shall not to more than 5mm), including making Cum 10117.60 23.40 236751.84

drainage opening wherever required complete etc. as per direction of

Engineer-in-charge (length of finished kerb edging shall be measured

for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and laying tactile tile (for vision impaired persons as per

standards) of size 300x300x9.8mm having with water absorption less

than 0.5% and conforming to IS:15622 of approved make in all colours

and shades in for outdoor floors such as footpath, court yard, multi

modals location etc., laid on 20mm thick base of cement mortar 1:4 (1

cement : 4 coarse sand) in all shapes & patterns including grouting the

joints with white cement mixed with matching pigments etc. complete

as per direction of Engineer-in-Charge.

94 11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size

Size of Tile 600 x 600 mm

Providing and fixing Grass-Cel Porous Paving Blocks are scientifically

engineered and designed to support the weight of heavy vehicles and

pedestrian traffic. Each block has precisely arranged hexagonal cells

that allow the nesting of adjoining blocks, which can form a mat of any

desirable size. Grass-Cel is resistant to rot and decay, vermin and

95 NDSR insects, petroleum, oil and ordinary solvents, weather and temperature Sqm 306.00 1453.14 444660.84

extremes, warpage, chipping and water. Grass-Cel can be sawn, nailed,

filed, drilled or shaped with ordinary tools. Material: 100% recycled UV

stabilised green high density polyethylene (HDPE), Block Dimensions

(Width x Length x Height): 305mm x 295mm x 37mm. Each Block Has: -

eight (8) extending locking tabs.

B 2 HORTICULTURE AND LAND SCAPING (SOFTSCAPE)

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Trenching in ordinary soil up to a depth of 60 cm including removal and

stacking of serviceable materials and then disposing of surplus soil, by

spreading and neatly levelling within a lead of 50 m and making up the

trenched area to proper levels by filling with earth or earth mixed with

sludge or / and manure before and after flooding trench with water

(excluding cost of imported earth, sludge or manure).

Supplying and stacking of good earth at site including royalty and

97 2.2 carriage upto 5 km lead complete (earth measured in stacks will be cum 469.50 73.00 34273.50

reduced by 20% for payment).

Supplying and stacking at site dump manure from approved source,

99 2.4 including carriage upto 5 km lead complete (manure measured in stacks

will be reduced by 8% for payment) :

99.1 2.4.3 Screened through sieve of I.S. designation 4.75 mm cum 287.75 27.00 7769.25

100 2.5 Rough dressing the trenched ground including breaking clods. sqm 1.30 247.00 321.10

Uprooting weeds from the trenched area after 10 to 15 days of its

flooding with water including disposal of uprooted vegetation.

102 2.7 Fine dressing of the ground. sqm 3.25 235.00 763.75

Spreading of sludge, dump manure and/or good earth in required

103 2.8 thickness as per direction of officer-in-charge (cost of sludge, dump cum 46.15 79.00 3645.85

manure and/ or good earth to be paid separately).

Mixing earth and sludge or manure in the required proportion specified

or directed by the Officer-in-charge

Grassing with selection No. 1/ Doob grass including watering and

maintenance of the lawn for 30 days or more till the grass forms a thick

lawn, free from weeds and fit for mowing including supplying good

earth, if needed (the grass and good earth shall be paid for separately).

2.10.1 In rows 5 cm apart in both directions sqm 15.55 22.00 342.10

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

2.10.2 With grass Turf sqm 11.70 212.00 2480.40

Preparation of beds for hedging and shrubbery by excavating 60 cm

deep and trenching the excavated base to a further depth of 30 cm,

refilling the excavated earth after breaking clods and mixing with sludge

or manure in the ratio of 8:1 (8 parts of stacked volume of earth after

reduction by 20% : one part of stacked volume of sludge or manure

106 2.13 after reduction by 8%), flooding with water, filling with earth if cum 195.90 34.00 6660.60

necessary, watering and finally fine dressing, leveling etc. including

stacking and disposal of materials declared unserviceable and surplus

earth by spreading and leveling as directed, within a lead of 50 m, lift up

to 1.5 m complete (cost of sludge, manure or extra earth to be paid for

Digging holes in ordinary soil and refilling the same with the excavated

earth mixed with manure or sludge in the ratio of 2:1 by volume (2

parts of stacked volume of earth after reduction by 20% : 1 part of

107 2.14 stacked volume of manure after reduction by 8%) flooding with water,

dressing including removal of rubbish and surplus earth, if any, with all

leads and lifts (cost of manure, sludge or extra good earth if needed to

be paid for separately)

2.14.1 Holes 1.2 m dia and 1.2 m deep Each 305.35 23.00 7023.05

2.14.2 Holes 90 cm dia, and 90 cm deep Each 130.40 1.00 130.40

2.14.3 Holes 60 cm dia, and 60 cm deep Each 39.95 2.00 79.90

2.14.4 Holes 45 cm dia, and 45 cm deep. Each 17.10 2.00 34.20

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to

60mm thickness of existing ground prepared with proper level and

ramming with tools wooden (Dhurmos) and than rolling the surface

with light roller make the surface smoothen and light waterning with

sprinkler and maintenance for 30 days or more till the grass establish

properly, as per direction of officer-in-charge.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm

thickness of existing ground prepared with proper level and ramming

with required tools wooden and than rolling the surface with light roller

make the surface smoothen and light watering the same maintenance

for 30 days or more till the grass establish properly,as per direction of

officer in charge

Removal of garden waste by TATA 407 or equivalent including

110 2.6 loading/unloading and carriage upto 1 km lead,complete disposal upto Per Trip 373.00 4.00 1492.00

designated place as per direction of officer-in-charge .

Sections of DSR (Civil) Applicable for DSR (Horticulture)

Supplying and spreading of sand in lawn area, including watering, and

dressing complete.

CHAPTER 3.0 FOLIAGE AND SHADE LOVING PLANTS

Providing and Displaying of Aglaonema Sam ht.30 cm well developed

three in one, having 18 to 20 fresh, healthy and attractive colorful leaves

in 35 cm size Earthen pot/Chali/Tray & as per direction of the officer-in-

Providing and displaying of Araucaria cookie having ht. 1.80 m to 1.95

m, straight, well developed, fresh and healthy with lush green leaves

from bottom to top in 30 cm size of Earthen pot/Plastic pot & as per

direction of the officer-in-charge.

Providing and displaying of Areca Palm having ht. 2.40 m to 2.70 m with

12 to 14 suckers, well developed, fresh and healthy with lush green

foliage in 35 cm size of Bucket type cement pots & as per direction of the

officer-in-charge.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and displaying of Croton Petra Bangalore variety having ht.

60 cm to 75 cm with 4 to 6 branches, well developed, fresh and healthy

colorful leaves in 25 cm size of Earthen pot/Plastic pot & as per

direction of the officer-in-charge.

Providing and displaying of Croton Petra Bangalore (Specimen ) variety

having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh &

healthy foliage approximately 60-65 leaves in 30 cm size of Earthen

pot/ Plastic pot & as per direction of the officer-in-charge.

117 4 SUB HEAD 4.0 SEASONAL PLANTS

Winter Seasonal Plants

Providing and Displaying Antirrhinum Hybrid dwarf variety, specimen

118 4.4 (8-10) with fresh & healthy foliage in full bloom well developed in 35 Each 538.15 23.00 12377.45

cm Earthen Tray/Challi Pot and as per direction of the officer-in-charge.

Providing and Displaying Cyclamen hybrid variety specimen 5-6 in a

119 4.23 pot, fresh & healthy in full bloom well developed in 35 cm Earthen Each 807.70 2.00 1615.40

Tray/ Nand. as per direction of the officer-in-charge.

Providing and Displaying Dianthus dwarf specimen 6-8 in a pot with

120 4.28 fresh & healthy foliage in full bloom well developed in 35 cm Earthen Each 377.20 3.00 1131.60

Tray/Nand as per direction of the officer-in-charge.

Providing and Displaying Helianthus different colour with full bloom (3

121 4.34 in one) fresh & healthy in 25 cm Earthen Pot/Plastic Pot well developed Each 215.25 1.00 215.25

as per direction of the officer-in-charge.

Providing and Displaying Pansy Hybrid Sakata in different colour

specimen 6-8 in a pot with fresh & healthy foliage in full bloom well

developed in 35 cm Earthen Tray/ Nand as per direction of the officer-

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and Displaying Primula Hybrid variety specimen 5-6 in each

Pot with fresh & healthy foliage in full bloom different colour well

developed in 35 cm Earthen Tray/ Nand as per direction of the officer-

Providing and Displaying Ranunculus Hybrid variety in different colour

specimen 5-6 in each Pot with fresh & healthy foliage in full bloom well

developed in 35 cm Earthen Tray/ Nand as per direction of the officer-

SUMMER & RAINY SEASONAL PLANTS

Providing and Displaying Budded Rose (H.T. variety) 3 to 4 healthy

125 4.91 branch 30 cm and above ht. well developed with one and above flower Each 32.80 1.00 32.80

plant in 20 cm Earthen Pot, as per direction of the officer-in-charge.

Providing and Displaying Creeper Rose variety 3 to 4 healthy branch 60

126 4.92 cm and above ht. well developed with one and above flowers in 25 cm Each 75.85 1.00 75.85

Earthen Pot, as per direction of the officer-in-charge.

Providing and Displaying Standard Rose (H.T. variety) 3 to 4 healthy

127 4.93 branch 90 cm and above ht. well developed with one and above flowers Each 150.70 1.00 150.70

in 25 cm Earthen Pot, as per direction of the officer-in-charge.

5 SUB HEAD 5.0 ORNAMENTAL PLANTS

Providing and Displaying Bamboo Buddha valley with fresh & healthy 3

128 5.7 to 4 suckers having 75 to 90 cm ht. in 25 cm size Earthen Pot/ Plastic Each 461.25 1.00 461.25

Pot as per direction of the officer-in-charge.

Providing and Displaying Bird of paradise well developed with fresh &

129 5.1 healthy 90 to 120 cm ht in 30 cm Earthen Pot/ Plastic Pot as per Each 389.50 5.00 1947.50

direction of the officer-in-charge.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and Displaying Bismarckia Palm 115 to 180 cm ht., well

130 5.11 developed 12 and above good color fresh and healthy leaves in 40 cm Each 1937.25 5.00 9686.25

Cement Pot as per direction of the officer-in-charge.

Providing and Displaying Bougainvillea named variety, Sobhra, Thima,

Marry palmar, Cherry Blossom etc. well developed with fresh & healthy

bushy in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction

of the officer-in-charge.

Providing and Displaying Ficus black vivion piller topiary (sylinder

132 5.2 type) well developed with fresh & healthy 180 to 210 cm ht in 40 cm Each 2050.00 4.00 8200.00

Cement Pot as per direction of the officer-in-charge.

Providing and Displaying Ficus Nuda topiary well developed with fresh

133 5.22 & healthy 5 to 6 big ball specific size and shape 180to 210cm ht in 40 cm Each 2593.25 4.00 10373.00

Cement Pot as per direction of the officer-in-charge.

6 SUB HEAD 6.0:GROUND COVERS PLANTS

Providing and stacking of Euphorbia milli hybrid variety, having ht. 30

cm to 45 cm with multi branch, full bloom, fresh and healthy leaves in

30 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-

135 7 SUB HEAD 7.0:TREE PLANTS

Providing and stacking of Adansonia digitata (kalp vricksh) of ht 150-

165 cm in bag size of 25 cm as per direction of the officer-in-charge.

Providing and stacking of Azadirachta indica ( Neem ) of height 120-

137 7.5 130cm in big polybag of size 25 cm as per direction of the officer-in- Each 65.00 3.00 195.00

Providing and stacking of Bauhinia purpurea (Kachnar) of height 150-

138 7.8 165 cm. in big poly bags of size 25 cm as per direction of the officer-in- Each 50.00 1.00 50.00

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and stacking of Bombax ceiba of height 150-165 cm. in big

poly bags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Bottle palm of ht. 270-300 cm bottom girth 40-

140 7.12 50 cm well developed in big HDPE bags as per direction of the officer-in- Each 550.00 15.00 8250.00

Providing and stacking of Cassia fistula (Amaltash) of height 120-135

141 7.16 cm. in big poly bags of size 25 cm as per direction of the officer-in- Each 65.00 4.00 260.00

Providing and stacking of Delonix regia (Gulmohar) of height 150-165

142 7.24 cm. in big poly bags of size 25 cm as per direction of the officer-in- Each 60.00 2.00 120.00

Providing and stacking of Ingla dulcis (Jungle Jalebi) of height 150-165

143 7.47 cm. in big poly bags of size 25 cm as per direction of the officer-in- Each 80.00 2.00 160.00

Providing and stacking of Jacaranda mimosifolia of height 150-165 cm.

in big poly bags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Michelia champa (Golden Champa) of height

146 7.55 90- 105 cm. in earthen pots of size 25 cm as per direction of the officer- Each 90.00 2.00 180.00

Providing and stacking of Mimusops elengi (Maulsri) of height 180-195

147 7.59 cm., well developed with thick stem in big in big size HDPE bag as per Each 125.00 2.00 250.00

direction of the officer-in-charge.

Providing and stacking of Nauclea cadamba (Kadam) of height 150-165

cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and stacking of Phoenix sylvestris Roxb. (Wild date

149 7.63 palm/khajur) of height 150-165 cm. in Big HDPE Bag as per direction of Each 650.00 3.00 1950.00

the officer-in-charge.

Providing and stacking of Phyllanthus emblica (Amla) of height 150-165

cm. in Big HDPE Bag as per direction of the officer-in-charge.

Providing and stacking of Tectona grandis (Teak) of height 150-165 cm.

in big polybags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Terminalia arjuna of height 150-165 cm. in big

polybags of size 25 cm as per direction of the officer-in-charge.

153 8 SUB HEAD 8.0:SHRUBS

Providing and stacking of Calliandra hybrida of height 105-120 cm., well

154 8.7 branched, bushy in big size HDPE bag as per direction of the officer-in- Each 90.00 25.00 2250.00

Providing and stacking of Cassia biflora of height 90-105 cm., well

155 8.1 branched, bushy in big size HDPE bag as per direction of the officer-in- Each 100.00 10.00 1000.00

Providing and stacking of Dombeya mastersii of height 60-75 cm. with 4-

5 branches in bag of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Ficus blackii (F.vivion) (bushy) of height 150-

157 8.23 165 cm. with 8-10 branches and healthy foliage in earthen pots of size Each 250.00 10.00 2500.00

30 cm as per direction of the officer-in-charge.

Providing and stacking of Ficus panda of height 90-105 cm. with 10-12

158 8.28 branches and healthy foliage, well formed in cement pots of size 30 cm Each 225.00 10.00 2250.00

as per direction of the officer-in-charge.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and stacking of Hibiscus variegated of height 60-75 cm. with 8-

159 8.39 10 branches and healthy variegated foliage in cement pots of size 35 cm Each 180.00 18.00 3240.00

as per direction of the officer-in-charge.

Providing and stacking of Tabernaemontana coronaria (Chandni single)

160 8.63 veriegated of height 105-120 cm., multibranched, bushy in big size Each 110.00 10.00 1100.00

HDPE bag as per direction of the officer-in-charge.

9 SUB HEAD 9.0:CREEPER PLANTS

Providing and stacking of Allamanda cathartica of height 30 cm to 45

161 9.1 cm.in 20 cm size of Earthen pots / Plastic pots & as per direction of the Each 45.00 10.00 450.00

officer-in-charge.

Providing and stacking of Allamanda violacea of height 30 cm to 45 cm.

in poly bag of size 20 cm as per direction of the officer-in-charge.

Providing and stacking of Bignonia venusta (Golden shower) of height

163 9.3 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per Each 40.00 20.00 800.00

direction of the officer-in-charge.

Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary

Baring,Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa,

164 9.4 Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Each 40.00 10.00 400.00

Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of

Earthen pots / Plastic pots & as per direction of the officer-in-charge.

Providing and stacking of Passiflora caerulea (Rakhi bel) of height 30 cm

165 9.1 to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction Each 50.00 25.00 1250.00

of the officer-in-charge.

12 SUB HEAD 10.0:ANNUAL FLOWER SEEDLINGS/CUTTINGS

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and stacking of winter seasonal seedling/cutting at site of

166 10.1 work well developed and healthy free from disease in per tray and each

tray having 100 Nos plants as per direction of the officer-in-charge.

166.2 10.1.2 Antirrhinum dwarf Per Tray 600.00 35.00 21000.00

166.5 10.1.6 Carnation (double) Dutch Per Tray Per Tray 1000.00 15.00 15000.00

166.6 10.1.7 Carnation (double) Lilliput Per Tray Per Tray 1200.00 12.00 14400.00

166.7 10.1.18 Gerbera hybrid double Per Tray 2200.00 6.00 13200.00

Sub Total 380722.00 0.00

BOQ - INTERNAL ELECTRICAL WORKS

No. Ref. (DSR-2022)

DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

MAIN PANEL FOR BUILDING

Design, manufacture, supplying fixing in position of the following front

operated cubicle type, front access, dead back, 2mm thick steel enclosed

free standing, dust and vermin proof, switchboard with IP42 protection

167 with hinged and lockable doors complete with interconnections, tinned

copper crimping lugs, bonding to earth and painting, suitable for use at

415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level

of 25 kA symmetrical at 415 volts.

800 Amps 4 Pole Electrically operated fully drawout type air circuit

breaker with ON/OFF/TRIP indicating lamps with MCB's and over

current short circuit and earth fault microprocessor releases (Type 6A

of MG or equivalent make) - 2 set.

Metering & Indication

VAF digital electronic meter with inbuilt selector switch and 800/5

Amps suitable VA, CL 1 CTs . - 1 Set

1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs.

Phase indicating light shall be protected by 6A MCB. - 1 Set

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

1000 Amps 4 Pole 25 kA for 1 sec. AL. bus bars with heat coloured

shrinkable insulation sleeve. - 1 Set

3 No. 400amps 4P MCCB 25kA outgoing feeder .

4 No. 63amps 4P MCCB 25kA outgoing feeder .

4 No. 100amps 4P MCCB 25kA outgoing feeder .

Notes: a. All MCCBs shall be of 25 KA breaking capacity and suitable for

motor duty application.

b. Provision shall be made for providing potential free contacts to all

pumps starters for connection to BAS

c. Provision shall be made to ensure system protection from dry running of

d. main Panel is of TTA type & sub panels Should be PTTA type

NDSR BUILDING PANEL_as described above. Set 405000.00 1.00 405000.00

167.1 MDB-UPS PANEL

Design, manufacture, supplying fixing in position of the following front

operated cubicle type, front access, dead back, 2mm thick steel enclosed

free standing, dust and vermin proof, switchboard with IP42 protection

with hinged and lockable doors complete with interconnections, tinned

copper crimping lugs, bonding to earth and painting, suitable for use at

415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level

of 25 kA symmetrical at 415 volts . It should be complete with in all

respects as per techinical specifications.

1No. 63 amps 4P 25 kA, Moulded Case Circuit Breaker with TM release

Digital electronic VAF meter with and 63/5 Amps 5 VA, CL 1 CTs . - 1 Set

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Additional earth fault protection will be provided in all incoming

Metering & Indication

1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs.

Phase indicating light shall be protected by 6A MCB. - 1 Set

100 Amps 4 Pole 25 kA for 1 sec. copper bus bars with heat coloured

shrinkable insulation sleeve. - 1 Set

4 No. 32 amps DP MCB 16kA outgoing feeder.

4 No. 40 amps 4 Pole MCB 16kA outgoing feeder.

Notes: a. All MCCBs shall be of 25 KA breaking capacity and suitable for

motor duty application.

b. Provision shall be made for providing potential free contacts to all

pumps starters for connection to BAS

c. Provision shall be made to ensure system protection from dry running of

d. main Panel is of TTA type & sub panels Should be PTTA type

Note : CPRI/NABL Test reports (65 KA short ckt +IP 65 test) for ach

panel has to be submitted to department

NDSR MDB-U1 PANEL_as described above. Set 95000.00 1.00 95000.00

167.2 MDB-LIFT PANEL

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Design, manufacture, supplying fixing in position of the following front

operated cubicle type, front access, dead back, 2mm thick steel enclosed

free standing, dust and vermin proof, switchboard with IP42 protection

with hinged and lockable doors complete with interconnections, tinned

copper crimping lugs, bonding to earth and painting, suitable for use at

415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level

of 25 kA symmetrical at 415 volts . It should be complete with in all

respects as per techinical specifications.

1No. 100 amps 4P 25 kA, Moulded Case Circuit Breaker with TM release

Digital electronic VAF meter with and 100/5 Amps 5 VA, CL 1 CTs . - 1

Additional earth fault protection will be provided in all incoming

Metering & Indication

1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs.

Phase indicating light shall be protected by 6A MCB. - 1 Set

150 Amps 4 Pole 25 kA for 1 sec. copper bus bars with heat coloured

shrinkable insulation sleeve. - 1 Set

2 No. 25 amps DP MCB 16kA outgoing feeder.

4 No. 63 amps 4 Pole MCCB 16kA outgoing feeder.

Notes: a. All MCCBs shall be of 25 KA breaking capacity and suitable for

motor duty application.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

b. Provision shall be made for providing potential free contacts to all

pumps starters for connection to BAS

c. Provision shall be made to ensure system protection from dry running

d. main Panel is of TTA type & sub panels Should be PTTA type

Note : CPRI/NABL Test reports (65 KA short ckt +IP 65 test) for ach

panel has to be submitted to department

NDSR MDB-LIFT PANEL_as described above. Set 165200.00 1.00 165200.00

167.3 MDB- (VRV PANEL)

Design, manufacture, supplying fixing in position of the following front

operated cubicle type, front access, dead back, 2mm thick steel enclosed

free standing, dust and vermin proof, switchboard with IP42 protection

with hinged and lockable doors complete with interconnections, tinned

copper crimping lugs, bonding to earth and painting, suitable for use at

415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level

of 25 kA symmetrical at 415 volts . It should be complete with in all

respects as per techinical specifications.

1No. 400 amps 4P 25 kA, Moulded Case Circuit Breaker with TM release

Digital electronic VAF meter with and 400/5 Amps 5 VA, CL 1 CTs . - 1

Additional earth fault protection will be provided in all incoming

Metering & Indication

1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs.

Phase indicating light shall be protected by 6A MCB. - 1 Set

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

500 Amps 4 Pole 25 kA for 1 sec. AL. bus bars with heat coloured

shrinkable insulation sleeve. - 1 Set

25 No. 63 amps 4P MCB 16kA outgoing feeder

b. Provision shall be made for providing potential free contacts to all

pumps starters for connection to BAS

c. Provision shall be made to ensure system protection from dry running of

Note : Panel should be of PTTA type

NDSR MDB-_as described above. Set 316717.20 1.00 316717.20

167.4 MDB-(KITCHEN PANEL)

100 Amps TP+N MCCB with following accessories:

Digital electronic VAF meter with and 100/5 Amps 5 VA, CL 1 CTs . - 1

Phase indicating light shall be protected by 2 Amps SP MCB's. - 3 Set.

150 Amps TPN aluminium bus bars with heat shrinkable insulation

sleeve. - 1 Set

63 A 4 Pole MCB - 2 No.

63 A 4 Pole MCB - 2 No.

63A 4 Pole MCB with 63 A 4 Pole RCCB of 30mA - 2 No.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

40A 4 Pole MCB with 40 A 4 Pole RCCB of 30mA - 2 No.

63A DP MCB with 63 A DP RCCB of 30mA - 4 No.

40A DP MCB with 40 A DP RCCB of 30mA - 4 No.

63A TP+N MCCB - 2 Set

All MCCB’s shall be of 16 KA breaking capacity.

All MCB’s shall be of 10 KA breaking capacity.

NDSR MDB-(KITCHEN PANEL)_ described as above Set 290000.00 1.00 290000.00

168.0 DISTRIBUTION BOARDS

Supplying and fixing following way, single pole and neutral, sheet steel,

MCB distribution board, 240 V, on surface/ recess, complete with tinned

168.1 DSR-2.3 copper bus bar, neutral bus bar, earth bar, din bar, interconnections,

powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

Supplying and fixing of following ways surface/ recess mounting,

vertical type, 415 V, TPN MCB distribution board of sheet steel, dust

protected, duly powder painted, inclusive of 200 A tinned copper bus

bar, common neutral link, earth bar, din bar for mounting MCBs (but

without MCBs and incomer ) as required . (Note : Vertical type MCB

TPDB is normally used where 3 phase outlets are required.)

Supplying and fixing following way, horizontal type three pole and

neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess,

168.3 DSR-2.4 complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator)

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'C' series,

miniature circuit breaker suitable for inductive load of following poles

in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

Supplying and fixing single pole blanking plate in the existing MCB DB

complete etc. as required.

Supplying and fixing following rating, double pole, (single phase and

neutral), 240 V, residual current circuit breaker (RCCB), having a

sensitivity current 30 mA in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying, fixing, connecting, testing and commissioning of following

rating, ISI marked (IS 8828) 240 / 415 volts, 10 KA, Miniature Circuit

Breaker (MCB) of single / double / three / four poles in the existing

MCB DB or in existing MS enclosure complete in all respects.

Supply of XLPE insulated and PVC sheathed Aluminium/Copper

169 conductor armoured cable of 1.1 KV grade confirming to IS : 7098:1988

with upto date amendments of following sizes:-

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supply of XLPE insulated and PVC sheathed copper conductor

170 unarmoured cable of 1.1 KV grade confirming to IS : 7098:1988 with

upto date amendments of following sizes

170.1 NDSR 1 core, 50 Sq.mm.(UPS & Server Rack earthing) Mtr 3523.00 50.00 176150.00

170.2 NDSR 1 core, 10 Sq.mm.(LV System earthing) Mtr 2680.00 25.00 67000.00

Laying of one number additional PVC insulated and PVC sheathed /

XLPE power cable of 11 KV grade of following size direct in ground

including excavation, sand cushioning, protective covering and refilling

the trench etc as required.

Laying and fixing of following sizes of one number PVC insulated and

172 DSR-7.8 PVC sheathed/XLPE Power cable of 1.1kv grade on cable tray as

172.1 DSR-7.8.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Mtr 45.00 500.00 22500.00

Supplying and making end termination with brass compression gland

and aluminium lugs for following size of PVC insulated and PVC

sheathed / XLPE aluminium conductor cable of 1.1 KV grade as

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supplying and making end termination with brass double compression

174 gland and copper lugs for following size of PVC insulated and PVC

sheathed / XLPE copper conductor cable of 1.1 KV grade as required.

174.1 NDSR 1 core, 50 Sq.mm.(UPS Rack earthing) Sets 253.00 4.00 1012.00

174.2 NDSR 1 core, 10 Sq.mm.(LV System earthing) Sets 237.00 4.00 948.00

HOT DEEP GI CABLE TRAYS & GI RACEWAYS

Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray (galvanisation thickness not less than 50

175 DSR-4.6 microns) with perforation not more than 17.5%, in convenient sections,

joined with connectors, suspended from the ceiling with G.I. suspenders

including G.I. bolts & nuts, etc. as required.

175.1 DSR-4.6.2 150 mm width X 50 mm depth X 1.6 mm thickness Metre 716.00 250.00 179000.00

175.2 DSR-4.6.4 300 mm width X 50 mm depth X 1.6 mm thickness Metre 963.00 100.00 96300.00

175.3 DSR-4.6.6 450 mm width X 50 mm depth X 2.0 mm thickness Metre 1325.00 50.00 66250.00

175.4 DSR-4.6.12 750 mm width X 62.5 mm depth X 2.0 mm thickness Metre 2257.00 25.00 56425.00

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including

accessories, and providing masonry enclosure with cover plate having

locking arrangement and watering pipe of 2.7 metre long etc. with

charcoal/ coke and salt as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick

including accessories, and providing masonry enclosure with cover

plate having locking arrangement and watering pipe of 2.7 metre long

etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess

for connections etc. as required.

Providing & fixing of 25mm x 5mm GI strip on surface or recess for

earth connection as required.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop

earthing as required.

E. INTERNAL WIRING:

Wiring for light point/ fan point/ exhaust fan point/ call bell point with

1.5 sq.mm FRLS PVC insulated copper conductor single core cable in

181 surface / recessed steel conduit, with modular switch, modular plate,

suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable etc. as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan

point/ call bell point (without independent switch etc.) with 1.5 sq. mm

182 FRLS PVC insulated copper conductor single core cable in surface/

recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC

insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated

copper conductor single core cable in surface/ recessed steel conduit

alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single

core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the

184 DSR-1.7 following sizes of FRLS PVC insulated copper conductor, single core

cable in surface/ recessed steel conduit as required.

184.2 DSR-1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire meter 589.00 300.00 176700.00

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supplying and fixing suitable size GI box with modular plate and cover

in front on surface or in recess, including providing and fixing 3 pin 5/6

A modular socket outlet and 5/6 A modular switch, connections etc. as

Supplying and fixing suitable size GI box with modular plate and cover

in front on surface or in recess, including providng and fixing 2 Nos. 3

186 DSR-1.56 pin 5/6 A modular socket outlet and 2 Nos. 5/ 6 A modular switch, Each 676.00 13.00 8788.00

connections etc. as required. (For light plugs to be used in non

residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover

in front on surface or in recess, including providng and fixing 3 Nos. 3

pin 5/6 A modular socket outlet and 2 Nos. 5/ 6 A modular switch,

connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover

in front on surface or in recess, including providing and fixing 6 pin 5/6

A & 15/16 A modular socket outlet and 15/16 A modular switch,

connections etc. as required.

Supplying and fixing two module stepped type electronic fan regulator

189 DSR-1.25 on the existing modular plate switch box including connections but Each 369.00 88.00 32472.00

excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular

plate & switch box excluding modular plate as required.

Providing and fixing circular/hexagonal Fan box cast iron /metal sheet

Box for ceiling fan clamp of internal dia 140mm , 73 mm height,Top id of

1.5mm thick MS sheet with its Top surface hacked of proper bonding

top lid shall be screwed into cast iron /metal sheet Box by mean of

3.3mm dia round headed screw one lock at the corners.clamp shall be

made of 12mm dia ms Bar band toshape as per standrd drawing.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with

2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP,

192 DSR-2.18 MCB, in sheet steel enclosure, on surface or in recess, with chained Each 1621.00 8.00 12968.00

metal cover for the socket outlet and complete with connections, testing

and commissioning etc. as required.

Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with

4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve,

193 DSR-2.20 TPMCB, in sheet steel enclosure, on surface or in recess, with chained Each 4107.00 5.00 20535.00

metal cover for the socket outlet and complete with connections, testing

and commissioning etc. as required.

Supplying and fixing 63 A, 415 V, TPN Industrial type socket outlet, with

4 pole and earth, metal enclosed plug top alongwith 63 A "C" curve,

194 NDSR TPMCB, in sheet steel enclosure, on surface or in recess, with chained Each 4702.00 2.00 9404.00

metal cover for the socket outlet and complete with connections, testing

and commissioning etc. as required.

F. LIGHTING FIXTURE AND FANS

Supply, Installation, testing and commissioning of following type

Fluorescent/ Compact fluorescent/LED light fixtures on wall/ Ceiling

including all fixing accessories such as leads, etc complete as required.

195 The Fluorescent /CFL fixtures shall be complete with Low loss copper

ballast PF improvement capacitor, Bipin Rotor type lamp holder, starter,

starter base, all pre wired upto the terminal block. All fixtures shall be

supplied with lamps.

Surface mounted 18W LED light with die cast aluminium housing with

inbuilt controller and robust consction complete as required.

Surface mounted 12W LED light with die cast aluminium housing with

inbuilt controller and robust consction complete as required.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supply of 9w LED Bulkhead with a nominal system lumen output of 600

lumens and a minimum system efficacy of 100 lm/W. The luminaire

shall have a rated system lifetime of 50,000 burning hours at L70. The

luminaire should have a color temperature of 6500K and CRI > 70. The

luminaire shall meet IP66 rating and IK 09 rating with THD < 20% and

PF > 0.9. The luminaire housing should made of High pressure die cast

Aluminium with polycarbonate front diffuser. The total power

consumption should not exceed 6W (including driver).

Supply of 9W LED (mirror light) 2ft Batten with a nominal system

lumen output of 1150 lumens and a minimum system efficacy of 115

lm/W. The luminaire shall have a rated system lifetime of 25,000

burning hours at L70. The luminaire should have a color temperature of

6500K and CRI>80. The luminaire shall meet IP20 rating with THD <

20% and PF > 0.9. The luminaire housing should made of CRCA with a

PC glossy diffuser. The total power consumption should not exceed 10W

(including driver).

Supplying, installation, testing and commissioning of 42W

surface/recess type LED (direct/indirect) of 595 x 595 mm size with

aesthetically designed extruded aluminum housing & injection molded

PC component diffuser with efficacy better than 110 Lumen/watt

(minimum total lumen delivered package 3960), with

CCT=3000/4000/5000 K,PF>0.95,THD<10% & with Driver having

efficiency >85% .Service life of 50,000 hrs @ L 70 etc complete as

Supplying, installation, testing and commissioning of 36W

surface/recess type LED (direct/indirect) of 595 x 595 mm size with

aesthetically designed extruded aluminum housing & injection molded

PC component diffuser with efficacy better than 110 Lumen/watt

(minimum total lumen delivered package 3960), with

CCT=3000/4000/5000 K,PF>0.95,THD<10% & with Driver having

efficiency >85% .Service life of 50,000 hrs @ L 70 etc complete as

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supplying, installation, testing and commissioning of 25W

surface/recess type LED (direct/indirect) of 595 x 595 mm size with

aesthetically designed extruded aluminum housing & injection molded

PC component diffuser with efficacy better than 110 Lumen/watt

(minimum total lumen delivered package 3960), with

CCT=3000/4000/5000 K,PF>0.95,THD<10% & with Driver having

efficiency >85% .Service life of 50,000 hrs @ L 70 etc complete as

Surface mounted 9W LED light with die cast aluminium housing with

inbuilt controller and robust consction complete as required.

Surface or wall mounted 20W & 2000Lumens LED Tube Rod with

202 NDSR extruded aluminium housing with inbuilt controller and robust Nos 951.30 86.00 81811.80

consction complete as required.

Supply and fixing ceiling fans complete with blades, down rods,

electronic regulator and accessories, 230 V, 1200mm sweep. Min air

delivery 210 CFM with service value 6.00 BEE. Five star rated with

brushless direct current motor (BLDC)

Supply and fix exhaust fan, steel body AC single Phase. 230V of size

300m sweep with, blades, and frame and louvers

Supplying,installation,testing an d commissioning of Passive

Infrared(PIR) technology based occupancy sensor having high

preformance, non regulating programmable type, suitable for connected

205 DSR-15.1 load upto 10Amp , for mounting heig ht up to 2.8mtr and for 5 m Nos 4602.00 40.00 184080.00

diameter coverage area along with necessary fixing arrangements i/c

programming at site etc. complete as

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

40 KVA UPS 3 phase (415 V + 15%) Volts input & 3 phase output (415 V

+ 1%), 50 Hz, Input harmonic Current THD <=3% typical at 100% load,

,<=6% maximum at 50% load with Isolation Transformer and 30 min

206 NDSR Battery backup for each UPS along with battery cabinet complete in all Set 1120643.00 1.00 1120643.00

respect including supporting steel structure for UPS and Battery as

required.UPS shall have facility for parallel operation. It Should be

complete in all respect and as per direction of Engineer in Charge.

TOTAL CARRIED TO SUMMARY 6028328.20 6012159.80

BOQ - EXTERNAL ELECTRICAL WORKS

A POWER DISRIBUTION SYSTEM

1 MAIN LT PANEL

Design, manufacture, supply inspection, instalation, handling,

assembling, affecting proper connections, testing and commissioning of

14 SWG CRCA sheet steel fabricated cubical type Main L.T. Panel, floor

mounting, dust & vermin proof, front operated construction, enclosure

class - IP 52, powder coated after proper treatment with 9 tank process

with top/bottom removable gland plates, as required, double

207 NDSR compression type cable glands, earth bus, hinged and lockable doors to

achieve dust and vermin proof complete with all inter connections small

wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc. The

Aluminium Bus Bar shall be of suitable length, 500 volts, 3 phase 50 Hz

TPN, electrolytic aluminium as per IS 8623 . The panel feeders shall be

suitable for terminating suitable nos. 3.5 / 4 core armoured aluminium

cable or Aluminium Bus Duct as required.

All incoming / bus coupler MCCB shall be microprocessor based with

O/L & S/C and E/F protection and all Outgoings MCCB's may be thermo-

magnetic based O/L & S/C protection.

All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking

arrangement, with trip setting as per load requirement. All TP MCCB

shall be with heavy duty solid isolable neutral link.

The breaking capacity specified for breakers is Ics value (service rating).

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

The instrument chamber shall be separate and shall comprise of flush

type ammeter, voltmeter, selector switches, cast resin type CT's & PT's,

etc. Separate CT's shall be provided for protective and measuring

All Energy Analyser / TVM Shall have RS 485 Modbus RTU on board

Communication protocol for SCADA communication.

The fault withstanding capacity of panel & its control gear shall be min.

25 KA rms for 1 sec.

GA drawings shall be got approved from Owners / Architects /

Consultants before fabrication.The panel has to be specifically

fabricated as per the space available at Stilt level.

Incomer from Transformer

1000 Amps 4 Pole Electrically operated fully drawout type air circuit

breaker with ON/OFF/TRIP indicating lamps with MCB's and over

current short circuit and earth fault microprocessor releases (Type 6A

of MG or equivalent make) - 1 set.

Intelligent multi function digital meter with Capability of Disturbance

Direction Detection, Sag & Swell Monitoring with Waveform Capturing,

Class of accuracy: 0.2S as per IEC62053-22, Sampling Rate of 256

Samples/Cycle, Harmonics analysis upto 63rd order for Energy,Voltage

& Current, RS485 PORT & Dual Ethernet PORT

Phase indicating light shall be protected by 2 Amps MCB’s. - 3 Sets

Breaker ON / OFF / TRIP indicating lights with control MCB’s. - 1 Set

Under voltage release - 1 Set

24 V DC Shunt trip coil. -1 Set

Breaker control switch - 1 Set

Auto-manual selector switch - 1 Set

Phase reversal relay - 1 Set

Auxiliary contacts required for necessary interlocking of breakers.

CTs for capcaitor panel as required.

Incomer from DG set

1000 Amps 4 Pole Electrically operated fully drawout type air circuit

breaker with ON/OFF/TRIP indicating lamps with MCB's and over

current short circuit and earth fault microprocessor releases (Type 6A

of MG or equivalent make) - 1 set.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Intelligent multi function digital meter with Capability of Disturbance

Direction Detection, Sag & Swell Monitoring with Waveform Capturing,

Class of accuracy: 0.2S as per IEC62053-22, Sampling Rate of 256

Samples/Cycle, Harmonics analysis upto 63rd order for Energy,Voltage

& Current, RS485 PORT & Dual Ethernet PORT

Phase indicating light shall be protected by 2 Amps MCB’s. - 3 Sets

Breaker ON / OFF / TRIP indicating lights with control MCB’s. - 1 Set

240 V under voltage Release - 1 Set

230V AC Shunt trip coil. -1 Set

Auto-manual / test selector / switch - 1 Set

Breaker control switch - 1 Set

Auxiliary contacts required for necessary interlocking of breakers.

1000 Amps 4 pole electrically operated fully drawout type air circuit

breaker with ON / OFF / TRIP indicating lamps with control MCB’s and

breaker control switch etc. complete as required. - 1 Set

The Contactor shall be electrically & Mechanically interlocked with both

incoming & Bus coupler's contactor in such a way that at any one time

two supply should not get mixed up.

3 Nos. LED type phase indicating lamps, 3 Nos. LED type indicating

lamps for indicating the status of feeder - ON / OFF / TRIP. each lamp

shall be with bakup HRC fuse/MCB.

1 section of 800 AMP & 1 section of 400 AMP, 415 Volts, 3 phase 50 HZ

TPN high conductivity electrolytic Aluminium bus bar of suitable length,

SMC / DMC supports, with colour coading and insulated by heat

shrinkable sleeves and clip on shrouds for joints.

The current density of bus bar up to 1000 Amp shall be minimum 1.00

The Maximum allowable temperature for the Bus bar to be restricted to

85 deg C. The temperature rise should be restricted to 35 deg C above

design ambient temperature of 50 deg C.

All outgoing feeders shall be provided with one set of phase indication

lamps and trip indication lamps with protection fuses/MCB and

ammeter with selector switch with suitable ratio CT's of accuracy class

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

800 Amps 4 Pole Electrically operated fully drawout type air circuit

breaker with ON/OFF/TRIP indicating lamps with MCB's and over

current short circuit and earth fault microprocessor releases (Type 6A

of MG or equivalent make) - 2 set.

3 No. 400amps 4P MCCB 25kA outgoing feeder .

2 No. 160amps 4P MCCB 25kA outgoing feeder .

6 No. 100amps 4P MCCB 25kA outgoing feeder .

4 No. 63amps 4P MCCB 25kA outgoing feeder . Set 4202256.00 1.00 4202256.00

2 NDSR CAPACITOR PANEL

Design, manufacture, supply, inspection, handling, assembling, affecting

proper connections, testing and commissioning of 14 SWG CRCA sheet

steel fabricated cubical type 200 KVAR A P F C Panel consisting of 5 / 10

/ 15 / 20 / 25 / 50 KVAR capacitor units in tier formation, housed in an

integrated cubicle type automatic switching ON and OFF control panel,

floor mounting, dust & vermin proof, front operated construction,

208 enclosure class - IP 52, powder coated after proper treatment with 9

tank process with top/bottom removable gland plates, as required,

double compression type cable glands, earth bus, hinged and lockable

doors to achieve dust and vermin proof complete with all inter

connections small wiring by min. 2.5 sq. mm. copper wires, ckt labels

etc. The Aluminium Bus Bar shall be of suitable length, 500 volts, 3

phase 50 Hz TPN, electrolytic aluminium as per IS 8623 .

The incoming MCCB shall be microprocessor based with inbuilt O/L &

S/C release with E/F protection and All outgoings MCCB's shall be

thermal-magnetic based with inbuilt O/L & S/C release.

All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking

arrangement, with adjustable O/L & S/C trip setting as per load

requirement. All TP MCCB's shall be with AC 3 duty contactor for

neutral isolation. All TP MCCB shall be with heavy duty solid isolable

neutral link. The breaking capacity specified is Ics value. The instrument

chamber shall be separate and shall comprise of flush type ammeter,

voltmeter, selector switches, CT's, PT's, etc

Capacitor duty contactors should be used for switching individual

capacitor banks.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

The fault withstanding capacity of panel & its control gear shall be min.

35 KA rms for 1 sec.

Each section of capacitor panel shall have Verticle hood & exhaust fans

for ventilation purpose.

The maximum height of the panel should not exceed 2100 mm unless

specifically approved.

The capacitor panel shall be integrated with the main L T Panel as per

schematic diagram.

1 no. 100 AMP. Three Pole, MCCB with heavy duty solid neutral link,

with O/C , S/C, E/F protection, adjustable thermal magnetic release, 35

KA Breaking Capaciy.

1 set- 3 CTs , ratio 100/5A Class 1.0 accuracy 15 VA burden for

1Nos- (0-100A) digital Ameter with selector switch

Micro processor based automatic power factor control relay (3 phase)

(including power factor meter) in 16 steps for automatic cut off or add

on capacitor units to keep the power factor at 0.95 with variation of

loads. All associated auxiliary contactors / relays shall be provided with

in the scope of work.

Phase indicating lamps with HRC fuses, and indicating in each capacitor

chamber unit to indicate On/Off status of capacitor unit.

250 AMP, 500 Volts, 3 phase 50 HZ TPN high conductivity electrolytic

Aluminium bus bar of suitable length, SMC / DMC supports, with colour

coding and insulated by heat shrinkable sleeves and clips on shrouds for

joints. The current density of bus bar shall be minimum 1.00 sq mm /

The Maximum allowable temperature for the Bus bar to be restricted to

85 deg C. The temperature rise should be restricted to 35 deg C above

ambient temperature.

4 no. of 125 AMPS TPN 35 KA MCCB and 80 amps AC3 duty contactor

with 50 KVAR gas filled 415 V capacitor bank, auto-manual selector

switch, start stop push button for manual operation including on/off

indicating lamps and delay timer complete.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

4 no. of 63 AMPS TPN 35 KA MCCB and 80 amps AC3 duty contactor

with 25 KVAR gas filled 415 V capacitor bank, auto-manual selector

switch, start stop push button for manual operation including on/off

indicating lamps and delay timer complete.

2 no. of 40 AMPS TPN 35 KA MCCB and 50 amps AC3 duty contactor

with 15 KVAR gas filled 415 V capacitor bank, auto-manual selector

switch, start stop push button for manual operation including on/off

indicating lamps and delay timer complete.

2 no. of 32 AMPS TPN 35 KA MCCB and 40 amps AC3 duty contactor

with 10 KVAR gas filled 415 V capacitor bank, auto-manual selector

switch, start stop push button for manual operation including on/off

indicating lamps and delay timer complete.

3 NDSR EXTERNAL LIGHTING FEEDER PILLAR

Design, manufacture, supplying fixing in position of outdoor type feeder

pillar, metal clade, suitable for 415 volt, 3-phase, 50 Hz with suitable

209 foundation and arrangement for incoming/ outgoing cable termination,

earthing, locking arrangement, insulated aluminium bus bars system,

interconnection etc.

63 amps TP+N MCCB with 63 Amps TP contactor 0-24 hours timer auto

/ manual by pass selector switches& following accessories:

Metering & Indication

1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs.

Phase indicating light shall be protected by 6A MCB. - 1 Set

1 Set of 150A TPN Aluminium Bus Bar with colour coded PVC Sleeves

25A FP MCB -6 No.

EXTERNAL LIGHTING FEEDER PILLAR _ described as above Set 78497.00 1.00 78497.00

B HT & LT CABLES

Supply, installation, testing and commissioning of the following HT & LT

cables or approved equivalent:

11 KV Grade HT Cable

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supply of following sizes of XLPE insulated PVC sheathed aluminium

conductor armoured power cable of 11kV grade H.T. Cable shall be of

earthed grade and shall be of stranded construction, comply to IS 8130.,

and with electrolytic grade purity aluminium conductor, shall be

manufactured & tested in accordance with IS : 7098 (Part II). Outer

sheath shall be of tough, PVC compound as per IS: 5831 and shall be

extruded over the armouring. etc.complete as per technical

specifications.

LAYING OF HT CABLES

Laying of 11 kV Grade HT Cables

Laying of one number XLPE power cable of 11 KV grade of following

size in in Ground, Surface and Cable Trays and Load in Hume Pipe/Duct.

etc.complete as per technical specifications.

211.1 DSR-8.1.2 Above 120 sq. mm and upto 400 sq. mm Mtr 577.00 150.00 86550.00

11 kV HT CABLE END TERMINATION

Supplying & making indoor cable end termination with Heat shrinkable

jointing kit complete with all accessories, bimetallic washers and

including lugs for the following size of 3 core XLPE aluminium

conductor cable of 33kV grade complete as required.

212.1 DSR-10.1.3 3 C x 240 sq.mm 11 KV XLPE (E) cable (indoor type) SET 3549.00 2.00 7098.00

Supplying & making Outoor cable end termination with Heat shrinkable

jointing kit complete with all accessories, bimetallic washers and

including lugs for the following size of 3 core XLPE aluminium

conductor cable of 33kV grade complete as required.

213.1 DSR-10.2.3 3 C x 240 sq.mm 11 KV XLPE (E) cable (indoor type) SET 6293.00 2.00 12586.00

Supply of XLPE insulated, armoured heavy duty electric cable with

aluminium conductor, 1100 volts grade, cross-sectional area as follows

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Laying of one number additional PVC insulated and PVC sheathed /

XLPE power cable of 11 KV grade of following size direct in ground

including excavation, sand cushioning, protective covering and refilling

the trench etc as required.

215.2 DSR-7.2.2 Above 35 sq. mm and upto 95 sq. mm Mtr 286.00 475.00 135850.00

215.3 DSR-7.2.3 Above 95 sq. mm and upto 185 sq. mm Mtr 304.00 150.00 45600.00

215.4 DSR-7.2.4 Above 185 sq. mm and upto 400 sq. mm Mtr 356.00 430.00 153080.00

Supplying and making end termination with brass compression gland

and aluminium lugs for following size of PVC insulated and PVC

sheathed / XLPE aluminium conductor cable of 1.1 KV grade as

Providing,fixing and laying of following dia hume Pipe NP2 class(light

duty) in ground with RCC collars,jointing with cement mortor 1:2

(1cement+2fine sand) including trenching 75cm deep and re-filling as

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

TOTAL CARRIED TO SUMMARY

Supply, installation, testing and commissioning of the following Earting

pits and strips or approved equivalent:

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including

accessories, and providing masonry enclosure with cover plate having

locking arrangement and watering pipe etc. with charcoal/ coke and salt

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including

accessories, and providing masonry enclosure with cover plate having

locking arrangement and watering pipe of 2.7 metre long etc. with

charcoal/ coke and salt as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick

including accessories, and providing masonry enclosure with cover

plate having locking arrangement and watering pipe of 2.7 metre long

etc. with charcoal/ coke and salt as required.

Providing & fixing of 25mm x 5mm GI strip on surface or recess for

earth connection as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess

for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop

earthing as required.

TOTAL CARRIED TO SUMMARY

D EXTERNAL LIGHTING

Supply, installation, testing and commissioning of the following lighting

fixtures & poles or approved equivalent:

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Outdoor street light fixture with 45W LED complete with all accessories

Supply Installation Testing Commissioning of GI 6.0 mtr octagonal Pole

with 1200mm single Arm with inbuilt weather proof junction box

including CC foundation (1:2:4 cement concrete (1 cement : 2 coarse

sand : 4 graded stone aggregate 40mm nominal size) including

excavation & refilling etc minimum size 350mm x350mmx500mm with

300mm x 300mm x10 mm Base plate including 4 Nos. heavy duty

foundation nut bolts with suitable length as required and complete in all

respect as per direction of Engineer in Charge as complete required

Supply, Installation, Testing and Commissioning of (4W-9W) Bollard

lighting fixture with IP54 LED Fixture

Supply, Installation, Testing and Commissioning of LED Post Top with a

system lumen output of 2300 lumens and a minimum system efficacy of

>85 lm/W. The luminaire shall have a rated system lifetime of 25,000

burning hours at L70. The luminaire should have a color temperature of

3000K and CRI > 70. The luminaire shall meet IP65 with THD < 20%

and PF > 0.9. The luminaire shall have closed diffused optics with

polycarbonate diffuser board. The total power consumption should not

exceed 27W (including driver).

Supply Installation Testing Commissioning of GI 4.0 mtr octagonal Pole

with inbuilt weather proof junction box including CC foundation (1:2:4

cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate

40mm nominal size) including excavation & refilling etc minimum size

350mm x350mmx500mm with 300mm x 300mm x10 mm Base plate

including 4 Nos. heavy duty foundation nut bolts with suitable length as

required and complete in all respect as per direction of Engineer in

Charge as complete required

Supply, Installation, Testing and Commissioning of ground Uplighter

lighting fixture with IP54 LED Fixture

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supply, installation, testing and commissionin of following

220 polycarbonate weather proof (IP-55) junction boxes including terminal

/ connector block complete as required.

TOTAL CARRIED TO SUMMARY

1 11 KV HT PANEL

Supply, Installation, Testing and Commissioning of indoor type floor

mounted metal clad, 2mm thick, 11KV VCB panel with 1No. 11 kV, 630A

350MVA VCB + 2No. 11 kV, 630A 350MVA VCB Panel with totally

enclosed & electrically interlocked, horizontal drawout, horizontal

isolation type breaker as per IS 13118, as per specifications, having

capacities as mentioned below, single break, trip free mechanism,

manually charged and auto/manually closing breaker suitable for use

on 11kV, 3Phase, 50Hz A.C. supply with short circuit fault level of 350

MVA, complete with self contained electrically interlocked rack in and

rack out mechanism, air insulated & encapsulated copper bus bars of

800Amp capacity, breaker featured with mechanical ON/ OFF indicator

with hand trip device, spring release coil, shunt trip coil and auxiliary

switch of 4NO + 4NC , PT 11kv/110volts , IDMT Relay and equipped

with following switchgears and accessories i/c connections and

Outgoing shall be suitable for 3Cx 240*sq.mm XLPE 11kV cable (cable

entry from bottom/top/side) end termination with heat shrinkable

jointing material, Strip heater with thermostat to prevent absorption of

moisture etc. as required.

INCOMER - Consisting of followings

1 No. 630 Amp. 350 MVA VCB with earth switch.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

1 No. 630 Amp. - 11kv/110 volts PT class 0.5 accuracy and 100va

burden with 1 no. voltmeter (0-15kv), digital type, selector switch for

voltmeter & protection fuses/MCB for HT metering up to 12kv on

1 NO.- Digital flush type class- 0.5 or better accuracy multifunction

meter showing voltage, ampere, KWH and power factor, frequency etc.

1 No. Microprocessor based numerical relay with O/L, E/F and highset

S/C protection compatible.

1 No. - Set of Dual core dual ratio 3 CTs 300/150/5/5A of 15VA burden

and accuracy Class -0.5 for metering and class 5P10 for protection.

Manual push buttons for VCB off, VCB on, & for trip alarm cancellation.

Shunt trip coil, 1 set of three phase R,Y,B indicating lamps along with 2A

SP MCB back up protection, control terminals & wiring, One number

tripple pole IDMT non-directional relay, two poles arranged for over

current protection and one pole for earth fault protection. One set

inbuilt DC power pack. Cable end box, trip super vision relay, master

trip relay, digital display power factor meter AC 3 phase, 1 set of solid

stat audio and visual annucinator with test/accept/reset- push button

ane electronic hooter, strip heater with thermostat to prevent

absorption of moisture.

OUTGOING - 1No. Consisting of followings

630 Amp. 350 MVA VCB with earth switch.

1 no;s- (0-100A) ammeters, dual scale digital type & selector switches

1 no;s- Microprocessor based numerical relay with O/L, E/F and highset

S/C protection compatible .

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

1 no;s- Set of Dual core dual ratio 3 CTs 100/5/5A of 15VA burden and

accuracy Class -1.0 for metering and class 5P10 for protection.

Power pack with 220 volt AC input & 24 volt DC continious output

suitable for closing/tripping/indication of HT panel board with 2 nos. of

12 volts each maintenance free batteries of 100(suitable) AH each,

charging unit, capacitor bank for emergency delievring for trip system

complete with suitable capacity of ammeter & voltmeter i/c connections

with 2.5 sqmm. FRLS insulated copper conductor cable etc. as required.

NDSR Suitable space for termination of 1 No. 3 C x 240 sq.mm XLPE cable. Nos 520000.00 2.00 1040000.00

TOTAL CARRIED TO SUMMARY

Supply, installation, testing and commissioning of 630KVA ,3 phase, 11/

0.433 KV oil filled Transformer copper wound with Dyn -II connection

and neutral brought out for earthing. The transformer shall be provided

with (–) 5% and (+) 15% ON load tap changer on HT side including

RTCC Panel as per IS:1180 PART-2-Level-2 or ECBC+BUILDING-2017 .

HT side cable termination box shall be suitable for 11 KV, 3 C x 300

mm2 XLPE cable and LT side terminal box shall be suitable for

terminating of 3.5 core 240 AMP Al XLPE Cable. The transformer shall

be supplied with all standard fitting viz dial type winding and oil

temperature indicator, buchholz relay with trip and alarm contacts,

thermistors for Alarm and Trip, winding temperature relay unit with

Alarm and trip, lifting lugs, earthing studs, drain oil point de-hydration

oil outlet & inlet, oil conservator and marshlling box, etc. complete in all

respect as required as per specification.

TOTAL CARRIED TO SUMMARY

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

PROVIDING, INSTALLING, TESTING AND COMMISSIONING OF

'SILENT TYPE' DIESEL GENERATING SET

Supply, installation, testing and commissioning of 625 KVA prime

continuous (actual) rating radiator cooled type diesel generating set

(alternature at 47 deg C temperature) with Acoustic Enclosure along

with electronic governor with AMF Panel with 1000 A 4Pole ACB

Isolator 35kA, base frame, Alternator (capable of delivering true 625

223 NDSR kVA output), Static Excitation System, Lube Oil System, Batteries, Nos 4680000.00 1.00 4680000.00

Battery charger, Instrumentation, 990 liter day oil fuel tanks, Silencer

with bellows, alarms, Engine Control Panel, AVM pads, AVR

Panel,Terminal arrangements in termination box suitable to 3.5cx300

sqmm aluminium cables with all other associated equipment / work as

per specifications.

B. EXHAUST PIPE

Supply, installation, testing and commissioning of exhaust pipe 'B' class

heavy duty MS pipe with all fixing accessories and hardwares. The

224 exhaust pipes shall be insulated with 75 mm thick mineral wool

insulation wrapped in chicken mesh and clad with 24 gauge aluminium

sheet including all support.

Supply, installation, testing and commissioning of MS supported self

standing structure for DG exhaust pipe 'B' class heavy duty MS pipe with

all fixing accessories and hardwares. The exhaust pipes shall be

insulated with 75 mm thick mineral wool insulation wrapped in chicken

225 MR mesh and clad with 24 gauge aluminium sheet including all support, TON 250000.00 1.00 250000.00

lighting arrester, avaition light as required complete in all respect. the

structure shall be painted with two coat of primer and two coat of

aluminium , GI paints as good as required.(the Cost of pipe is including

C. HOT DEEP GI CABLE TRAYS

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray (galvanisation thickness not less than 50

226 NDSR microns) with perforation not more than 17.5%, in convenient sections,

joined with connectors, suspended from the ceiling with G.I. suspenders

including G.I. bolts & nuts, etc. as required.

226.1 NDSR 600 mm width X 75 mm depth X 2.0 mm thickness Metre 1955.00 25.00 48875.00

226.2 NDSR 750 mm width X 75 mm depth X 2.0 mm thickness Metre 2270.00 25.00 56750.00

D LIGHTNING ARRESTOR

Providing and fixing of lightning conductor finial, made of 25 mm dia

227.0 DSR-6.2 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm Each 518.00 14.00 7252.00

thick G.I. base plate including holes etc. complete as required

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on

228.0 DSR-6.7 surface of wall for lightning conductor complete as required.(For Meter 126.00 400.00 50400.00

horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on

229.0 DSR-6.8 surface of wall for lightning conductor complete as required. (For Meter 197.00 300.00 59100.00

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip,

230.0 DSR-6.12 125 mm long, with 4 Nos. of G.I. bolts, nuts, chuck nuts and spring Each 121.00 14.00 1694.00

washers etc. complete as required.

Providing and laying G.I. tape 32 mm X 6 mm from earth electrode

directly in ground as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including

accessories, and providing masonry enclosure with cover plate having

locking arrangement and watering pipe of 2.7 metre long etc. with

charcoal/ coke and salt as required.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supply and Installation of Lightning counter - LCD screen shows the

number of lightning strikes, hour and date of lightning events Buttons

233.0 NDSR enable TIME/DATE setting and log viewing. Replaceable Nos 25672.00 1.00 25672.00

battery,working life minimum five years, Complies with IEC/EN 62561-

TOTAL CARRIED TO SUMMARY 1442607.00 19652917.60

Sl No.DSR 2022 ItemDESCRIPTION UNIT RATE QUANTITY DSR AMOUNT NDSR AMOUNT

A FIRE ALARM SYSTEM

Supplying, installation, testing and commissioning of micro processor

based intelligent addressable main fire alarm panel, central processing

unit with the following loop modules and capable of supporting not less

than 240 devices (including detectors) and minimum 120 detectors per

loop and loop length up to 2 km, network communication card,

minimum 320 character graphics/ LCD display with touch screen or

other keypad and minimum 4000 events history log in the non volatile

memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-

up with 24 volt sealed maintenance free batteries with automatic

charger. The panel shall have facility to connect printer to printout log

facility to have seamless integration with analog/digital voice

evacuation system (which is part of the schedule of work under SH: PA

System) and shall be complete with all accessories . The panel shall be

compatible for IBMS system with open protocol BACnet/ Modbus over

IP complete as per specifications

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supply, Installation, Testing & Commissioning of Addressable Multi-

criteria Photo-Thermal Detector with sensitivity range of 0.5 to 4.0%

obs/ft.The intelligent multi criteria detection device shall include the

ability to combine the signal of the thermal sensor with the signal of the

photoelectric signal in an effort to react hastily in the event of a fire

situation. It shall also include the inherent ability to distinguish between

a fire condition and a false alarm condition by examining the

characteristics of the thermal and smoke sensing chambers and

comparing them to a database of actual fire and deceptive phenomena.

The detector shall have twin bi-colour LED for 360 deg viewing.

Addressing shall be with user friendly rotary decimal switches. UL268,

7th Edition & FM Approved.

Supplying, installation, testing & commissioning of intelligent

236 DSR-17.2.4 analog addressable photothermal detector complete with No. 2858.00 220.00 628760.00

mounting base complete as required.

Supplying, installation, testing & commissioning of intelligent

237 DSR-17.2.9 addressable thermal detector with rate of rise cum fixed tempreature No. 2726.00 6.00 16356.00

thermistor complete with base as required.

Supplying, installation, testing & commissioning of fault isolator

complete with base as required.

DSR- Supplying, installation, testing & commissioning of addressable fire

17.2.10 control module complete as required.

Supply, Installation, Testing & Commissioning of Addressable Monitor

Module for Sprinklers, Panic Bars & other Third Party Inputs. The

monitor module shall monitor potential free contacts. The device shall

have an LED which shall blink in normal state & get steady on activation

to monitor the heath status of the device. Addressing shall be with user

friendly rotary decimal switches. Module shall be supplied with

mounting plate from OEM for ease of installation & maintenance UL &

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

DSR- Supplying, installation, testing & commissioning of addressable manual

17.2.14 call point complete as required.

DSR- Supplying, installation, testing & commissioning of addressable horn

17.2.15 cum strobe complete as required.

Supplying, installation, testing & commissioning of response indicator

243 DSR-17.2.5 on surface/recessed MS Box having two LED, metallic cover complete Nos. 276.00 50.00 13800.00

with all connections etc as required.

DSR- Supplying, installation, testing & commissioning of fire fighter phone

17.2.19 jack complete as required.

DSR- Supplying, installation, testing & commissioning of fire fighter telephone

17.2.17 handset complete as required.

DSR- Supplying, installation, testing & commissioning of addressable strobe

17.2.16 complete as required.

Supplying & laying of 2x1.5 sqmm fire survival armoured cable,

600/1000V rated with annealed copper conductor having glass mica

247 DSR-17.5.1 fire barrier tape covered by an extruded layer of Cross Linkable RM 359.00 3000.00 1077000.00

Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding,

steel wire armouring & LSZH outer sheath complete as required.

Providing and fixing of self illuminated / auto glow "EXIT" signs printed

on photoluminescent sheet containing self illuminated base chemical,

248 NDSR of appropriate size not less than 400 x 150 mm, suspended from Nos. 2871.00 20.00 57420.00

ceiling or fixed to the walls with accessories as required and as directed

at site etc. complete as required.

B PUBLIC ADDRESS SYSTEM

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supplying and drawing of cable Fire Retardant PVC insulated copper

conductor cable in the existing surface / recessed steel conduit of

following pairs, cores and size including connections and

interconnections etc. as required.

249.1 speaker cable Single pair, 2-core, 1.5 sqmm meter 54.00 1200.00 64800.00

Supplying and fixing of following sizes of steel conduit along with

accessories in surface/recess including painting in case of surface

conduit, or cutting the wall and making good the same in case of

recessed conduit as required.

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling

speaker complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W metal box

ceiling/wall speakers complete as required.

Supply, installation, testing and commissioning of rack mounted dual

Channel Digital Power Amplifier capable of delivering 300 W RMS

power output or 480 W RMS burst output; complete with 100 V Line

253 NDSR Matching Transformer, built-in fan for temperature control, Distortion No. 57800.00 2.00 115600.00

typically 0.03% @ 1 KHz, Hum and Noise 90 dB below rated output

selection facility,provision for hookup with Fire Alarm Panel, complete

with connections and required circuitry

Supply, Installation, Testing & Commissioning of 15U wall mount rack

with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supply, Installation, Testing & Commissioning of 8 zone IP based, digital

Voice Alarm controller expandable upto 128 zones. The voice alarm

controller should be able to connect directly over Ethernet. It should

have functions like the audio playing, zone control, fault monitoring, log

recording, volume control and amplifier switchover. The Voice alarm

255 NDSR controller should also have the following functions: Lot 337256.00 1.00 337256.00

. 255 Priorities

. Time schedule broadcasts

. Its own PTT microphone

. Capable of amplifier redundancy

. 8 trigger inputs/outputs

Supply, Installation, Testing & Commissioning of IP based Networkable

touch screen paging station for selection of zones, supervision of system

status, setting of scheduled broadcasts with the following functions:

256 NDSR . Built-in monitoring loudspeaker Nos. 50823.00 1.00 50823.00

. Detachable goose-neck microphone

. LCD touchscreen display

C CCTV (IP VIDEO SURVEILLANCE) SYSTEM

Supply, installation, testing and commissioning of 3 MP Bullet camera ,

ONVIF profile S ,G & T . UL , CE , FCC Certified ,1/2.8” Progressive Scan

CMOS ,2.7 mm to 12 mm motorized varifocal lens , Quad stream with

each stream support H.265+ compression simultaneously ,min

illumination : 0.01 Lux @ (F1.2,AGC ON), 0 Lux with IR , Shutter speed :

,H.264+ H.264 .SD card support , Alarm trigger - 1 input / 1 output ,

frame rate : Main stream should support 25 fps@5MP , Edge analytics :

line crossing , perimeter intrusion ,Face detection (deep learning) ,

pedestrian detection ,cross counting , stationary object , In built IR LED ,

IR Distance upto 50 meters , IP 67 , IK 10 housing , POE.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supply, installation, testing and commissioning of 3MP Dome camera ,

ONVIF profile S , G& T ,UL , CE , FCC Certified ,1/2.8” Progressive Scan

CMOS ,2.7 mm to 12 mm motorized varifocal lens , Quad stream with

each stream support H.265+ compression simultaneously ,min

illumination : 0.01 Lux @ (F1.2,AGC ON), 0 Lux with IR , Shutter speed :

,H.264+ H.264 .SD card support upto 128GB , Alarm trigger - 1 input /

1 output , frame rate : Main stream should support 25 fps@5MP ,Edge

analytics : line crossing , perimeter intrusion ,Face detection(deep

learning) , pedestrian detection ,cross counting , stationary object , In

built IR LED , IR Distance upto 40 meters , IP 67 , IK10 ,POE.

Supply, installation, testing and commissioning of 48 channel NVR ,

ONVIF compliant , recording bandwidth 640 Mbps , output interface 1

HDMI (up to 4K), 1 VGA , Alarm in/out :16ch in / 4ch out , 1 X RJ45

ethernet , iOS smartphone support , 8 HDD support , each HDD slot

support upto 8 TB HDD , RAID support , 1x3.0 USB for backup /upgrade

, 2x 2.0 USB for mouse .Edge analytics of poposed cameras must be

integrated with NVR . Artificial Intelligence Support having face

recognition with compatible deep learning supported cameras, AI-Face

registered quantity upto 10,000 ,A.I maximum captured quantity

200,000. . UL,CE,FCC certified.

Supply, installation, testing and commissioning of user Client control

software (web based) complete as per spec with valid licenses. The

software should enable the user to view multiple cameras in any

combination available on the network .

Supply, Installation, Testing and Commissioning of Full HD 55" LED

Professional Display Panel.

Supply, Installation, Testing & Commissioning of 8TB Surviellance Hard

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supply, Installation, Testing & Commissioning of CAT 6 UTP, LSZH Patch

262 NDSR Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, Nos. 350.00 35.00 12250.00

patch cord 2 Mtr for rack side switch to jack panel connectivity.

Supply, Installation, Testing & Commissioning of CAT 6 UTP, LSZH Patch

263 NDSR Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, Nos. 350.00 70.00 24500.00

patch cord 1 Mtr for rack side switch to jack panel connectivity.

Supply, Installation, Testing & Commissioning of CAT 6 UTP Universal

(both tool & toolless) information outlet (I/O) in accordance with ANSI

TIA 568 C.2, IEC 60603-7-4 2nd Edition, ISO/IEC TR 11801-9901-2014,

ROHS Compliant. The I/O should have minimu 750 mating cycle and

200 insertion cycle and UL approved,for Data, Voice, & Wi-Fi at user

Supply, Installation, Testing & Commissioning of 1, 2 and 4 port face

plate, British Style with Shutter, 2 Plate system clear finish with

transparent labelling, ABS-UL94-V2, ROHS Compliant, in accorandce

with standards like ANSI/TIA-568-C.2, ISO/IEC 11801:2002

AMMD.2:2010, YD/T 926.3-2009 & ISO/IEC 60603-7 white for I/O

fixing at user side.

Supply, Installation, Testing & Commissioning of loaded 24 port CAT 6

UTP, Transparent shutter jack panel, 1U height, UL-94V-0, Black with

cable support bar, clear label marks and earthing plug for CAT6A cable

termination at rack end.

Supply, Installation, testing & Commissioning of 24 port managed PoE

Network switch 10/100/1000 with 2 SFP

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable as per EIA in the

existing surface/ recessed Steel/PVC Conduit as required.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supplying and fixing of following sizes of steel conduit along with

accessories in surface/recess including painting in case of surface

conduit, or cutting the wall and making good the same in case of

recessed conduit as required.

D DATA , VOICE & Wi-Fi SYSTEMS

LOCAL AREA NETWORK ( LAN )

Supply, Installation, Testing & Commissioning of Core Switch with

switching capacity of 800Gbps, forwarding performance of 600Mpps

with 24x 1/10G SFP+ ports expandable to 32 SFP+ ports with 4x 40G

QSFP+ ports from day 1, dual hot swappable internal power supply,

64K IPv4 and IPv6 Routes and 30K multicast routes. Should support

advance layer 3 (RIPng, OSPF, BGP and MPLS) with 1 year support.

Supply, Installation, Testing & Commissioning of of Access Switch 24

Port POE+ Access Switches with switching capacity of 128 Gbps,

forwarding performance 95 Mpps, having 24 x 10/100/1000BASE-T

PoE-plus(RJ45) with minimum PoE budget of 370W and 4 x 10G SFP+

271 NDSR uplink ports, should have support for 9 switch Stacking with Nos. 602838.90 1.00 602838.90

bandwidth of minimum 120 Gbps. Should support min 2GB internal

DRAM, 2GB internal Flash memory, 32K MAC address, 4k Multicast

Routes, Should have static Routing from day 1 and upgradable to

support OSPF and VRRP with 1 year support.

Supply, Installation, Testing & Commissioning of fiber Modules

273 NDSR Supply, Installation, Testing & Commissioning of fiber Modules 10BASE Nos. 43578.90 1.00 43578.90

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supplying and fixing following modular switch/ socket on the existing

274 DSR-1.24 modular plate & switch box including connections but excluding

modular plate etc. as required.

274.1 DSR-1.24.6 Telephone socket outlet Each 148.00 40.00 5920.00

274.2 NDSR DATA/Wi-Fi socket outlet Each 298.00 90.00 26820.00

Supplying and fixing following size/ modules, GI box alongwith modular

base & cover plate for modular switches in recess etc. as required.

Supplying and fixing following Modular base & cover plate on existing

modular metal boxes etc. as required.

Supply, Installation, Testing & Commissioning of loaded 24 port CAT 6

UTP, Transparent shutter jack panel, 1U height, UL-94V-0, Black with

cable support bar, clear label marks and earthing plug for CAT6A cable

termination at rack end.

Supply, Installation, Testing & Commissioning of 22 U floor mount rack

with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts

Supply, Installation, Testing & Commissioning of 15U wall mount rack

with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable as per EIA in the

existing surface/ recessed Steel/PVC Conduit as required.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supplying and fixing of following sizes of steel conduit along with

accessories in surface/recess including painting in case of surface

conduit, or cutting the wall and making good the same in case of

recessed conduit as required.

E MATV SYSTEMS

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid

copper conductor PE insulated, shielded with fine tinned copper braid

and protected with PVC sheath in the existing surface/ recessed steel/

PVC conduit as required.

Supplying and fixing of following sizes of steel conduit along with

accessories in surface/recess including painting in case of surface

conduit, or cutting the wall and making good the same in case of

recessed conduit as required.

Supplying and fixing following modular switch/ socket on the existing

283 DSR-1.24 modular plate & switch box including connections but excluding

modular plate etc. as required.

283 DSR-1.24.7 TV antenna socket outlet Each 148.00 15.00 2220.00

Supplying and fixing following size/ modules, GI box alongwith modular

base & cover plate for modular switches in recess etc. as required.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supplying and fixing following Modular base & cover plate on existing

modular metal boxes etc. as required.

Supply, erection, testing and commissioning of splitter / tap off

286 NDSR mounted in suitable sizes MS boxes for MATV system and shall be

suitable for interactive system.

286 NDSR Four way Tap Off (T4) Each 9166.00 1.00 9166.00

F ACCESS CONTROL SYSTEM

Supply ,Installation ,Testing & Commissioning of 1 Door 1 reader access

control panel as per requirement

Supply, Installation , testing and commissioning of 12 V SMPS DC Power

288 NDSR Supply Unit, highly regulated and spikes free terminal voltage and Nos. 8256.60 5.00 41283.00

heavy sourcing current for regulated terminal voltage.

Supply, installation, testing & commissioning of software for

intergration with Owner's ERP based system for Attendence / Payroll

records complete with all accessories as required. (The Tenderer shall

quote the system complete as required).

Supply ,Installation ,Testing & Commissioning of smart Card Reader

asTechnical Specs.

Supply ,Installation ,Testing & Commissioning of Electromagnetic Lock

900 lbs, Single leaf, LED Status Display,

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supply ,Installation ,Testing & Commissioning of U/L Clamp made of

aluminium anodised for EM Lock.

Supplying and drawing following sizes of FRLS PVC insulated copper

conductor, single core cable in the existing surface/ recessed steel/ PVC

conduit as required.Supply , Installation , Testing and commissioning of

Exit push button as required.

Supplying and drawing following sizes of FRLS PVC insulated copper

294 DSR-1.17 conductor, single core cable in the existing surface/ recessed steel/ PVC

conduit as required.

8 x 1.5 sq. mm (between the every card readers & the access

Supplying and fixing of following sizes of steel conduit along with

accessories in surface/recess including painting in case of surface

conduit, or cutting the wall and making good the same in case of

recessed conduit as required.

TOTAL CARRIED TO SUMMARY 4665226.00 4847390.50

PLUMBING SANITARY & EXTERNAL SERVICES

Sl No. DSR Item DESCRIPTION UNIT RATE QUANTITY DSR AMOUNT NDSR AMOUNT

Anti germ Fluoro-Polymer Coated (neno coating) European W. C. Size

296 NDSR 390 X 365 X 540mm with solid poly propelyne made soft closing seat Each 10760.40 32.00 344332.80

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and fixing in position best indian ( bonut size 24mm, ceramic

297 NDSR disc size 19mm and min. body thickness 2mm, nickel plating 0.10 Each 1652.40 32.00 52876.80

micron and chrome plating 0.3 micron, quarter turn) 2-way Bib Cock

Providing and fixing in position best indian Health Faucet with 8mm dia

298 NDSR 1 meter long Flaxible Tube and wall bracket with N. R. V. (non- return Each 1555.20 32.00 49766.40

299 17.34 Providing and fixing toilet paper holder :

Providing and fixing white vitreous china type Anti germ Fluoro-

Polymer Coated Wash Basin size 190x600x435mm with C. I. Brakets, 15

mm C. P. wall mounted single lever consiled basin mixure, (cortrage size

300 NDSR 32 mm) 32 mm C. P. brass made waste coupling length 130mm and 32

mm C. P. Brass Made Bottle Trap size 200x300mm fittings and fixures

complete including Painting of fittings and cutting and making good the

wall and floors wherever

White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin

301 NDSR Size 190x600x435mm with wall mounted single lever consiled basin Each 13025.34 20.00 260506.80

mixure (cortrage size 32mm )

Providing and fixing white vitreous china battery based infrared sensor

operated urinal of approx. size 610 x 390 x 370 mm having pre & post

302 17.8 flushing with water (250 ml & 500 ml consumption), having water inlet Each 6804.00 15.00 102060.00

from back side, including fixing to wall with suitable brackets all as per

manufacturers specification and direction of Engineer-in-charge.

Providing and Fixing Frosted safety 8mm Glass made Urinal Partition

Size 900mm Height and 450mm width

Providing and fixing Stainless Steel A lSI 304 (18/8) kitchen sink as per

IS 13983 with C.I. brackets and stainless steel plug 40 mm including

painting of fittings and brackets, cutting and making good

the walls wherever required :

304.1 17.10.1 Kitchen Sink with drain Board

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

305 17.22A Providing and fixing CP brass bottle trap of approved quality and make for sink

PROVIDING & fixing storage type water heater of approved shade with

copper container, glasswool insulation,stove enamelled M.S jacket,

thermostatically controlled inner heater with pilot neon lamps, 15mm

inlet stop cock valve, on inlet connection, 15mm dia C.P flexible

connection pipe in inlet & outlet suitable for working pressure of 5/8

kg/sqcm complete as required.

306.1 NDSR a) Capacity 25 litres (Gyser) EACH 10000.00 8.00 80000.00

PROVIDING & fixing storage type water cooler of the following capacity,

I.S.I marked, stainless steel front panel, C.P brass push cock, inlet float

valve with all plum- bing and electrical accesDSRies, inlet, outlet,

overflow and PVC drain out connection to F.D complete

307.1 NDSR a) Cooling capacity 40 Lts/hr EACH 29661.02 8.00 237288.16

308 NDSR PROVDING AND FIXING STAINLESS STEEL CROCK ROACH JALI EACH 211.86 25.00 5296.50

Providing and fixing C.P. brass angle valve for basin mixer and geyser

points of approved quality conforming to IS:8931

Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 gms.

Providing and fixing in position best indian C. P. Brass made (0.3 micron

Chrom and 10 micron Nickel plated) Soap Dish Holder .

Providing and fixing mirror of superior glass (of approved quality) and

312 17.32 of required shape and size with plastic moulded frame of approved

make and shape with 6 mm thick hard board backing :

312.1 17.32.2 Rectangular shape 453x357mm Each 1361.80 2.00 2723.60

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and fixing in position best indian C. P. Brass made (0.3 micron

Chrom and 10 micron Nickel plated) Single Towel Ring Square

Providing and fixing C.P. brass sink mixer of approved quality and

make conforming to IS:specification.

INTERNAL DRAINAGE INSTALLATIONS

Providing and fixing cast iron trap of self cleansing design with cast iron

screwed down or hinged grating with or without vent arm complete,

including cost of cutting and making good the walls and

316 17.60.1 100 mm inlet and 100 mm outlet

316.1 17.60.1.1 Sand cast iron Sand as per IS: 3989 Each 1996.50 20.00 39930.00

317 17.60.2 100 mm inlet and 75 mm outlet

317.1 17.60.2.1 Sand cast iron Sand as per IS: 3989 Each 1975.15 25.00 49378.75

Providing and fixing to the inlet mouth of rain water pipe cast iron

grating 15 cm diameter and weighing not less than 440 grams.

319 17.32 Providing and fixing soil, waste and vent pipes .

320 17.35.1.2 100 mm dia. Pipe minimum wall thickness 5mm

Centrifugally cast (spun) iron socket and spigot (SandS) pipe as per IS:

Providing and fixing MS holder bat clamps of approved design to cast

iron (spun) pipe embedded in and Including cement concrete blocks 10

321 17.37 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20mm nominal size) including cost of cutting holes and

making good the walls etc.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing and fixing bend of required degree with access door, insertion

rubber washer 3mm thick, bolts and nuts complete.

322.1 17.38.2 Centrifugally cast (spun) iron pipe S&S Each 705.20 18.00 12693.60

323 17.39.1 Providing and fixing plain bend of required degree.

323.1 17.39.1.2 Sand cast iron S&S as per IS : 3989 Each 570.05 16.00 9120.80

Providing and fixing heel rest sanitary bend, in 100mm Centrifugally

cast (spun) iron pipe S&S

324.1 17.40.1.2 Sand cast iron SandS as per IS - 3989 Each 548.70 12.00 6584.40

325 17.41 Providing and fixing double equal plain junction of required degree.

Providing and fixing single equal plain junction of reqd. degree with

326 17.43 access door, insertion rubber washer 3mm thick, bolts and nuts

327.1 17.43.1.2 Standard cast (spun) iron pipe IS-3989 Each 925.70 40.00 37028.00

328 17.44 Providing and fixing single equal plain junction of required degree :

329.1 17.44.1.2 Sand cast iron S&S as per IS - 3989 Each 811.90 40.00 32476.00

Providing and fixing door piece, insertion rubber washer 3mm thick,

bolts & nuts complete :

331.1 17.55.1.2 Sand cast iron SandS as per IS - 3989 Each 683.85 40.00 27354.00

332 17.56 Providing and fixing terminal guard:

333.1 17.56.1.2 Sand cast iron S&S as per IS - 3989 Each 506.00 40.00 20240.00

334 17.57 Providing and fixing collar.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

335.1 17.57.1.2 Centrifugally cast (spun) iron pipe S&S Each 513.15 40.00 20526.00

Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent

pipes and fittings with two coats of synthetic enamel paint of any colour

such as chocolate grey, or buff etc. over a coat of primer (of approved

quality) for new work :

336.1 100mm dia cast (spun) iron S&S pipe Rm 69.55 200.00 13910.00

Providing lead caulked joints to spun iron or C.I. pipes and specials,

including testing of joints but excluding the cost of pig lead :

Providing and fixing C.P. brass grating of approved quality and make

conforming to IS: specification

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :

339 19.2 10 graded stone aggregate 40 mm nominal size) all-round

S.W. pipes including bed concrete as per standard design :

Note: This work shall be done all-round CI pipe at ground floor's

Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal

expansion (i) Single socketed pipes

Providing and fixing on wall face unplasticised - PVC moulded fittings/

accesDSRies for unplasticised Rigid PVC rain water pipes conforming to

IS : 13592 Type A, including jointing with seal ring conforming to IS :

5382, leaving 10 mm gap for thermal expansion.

343 12.42.1 Coupler

343.1 12.42.1.2 110 mm (minimum wall thickness 2.2 mm) Each 136.15 24.00 3267.60

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

344 12.42.2 Single push fit Coupler :

344.1 12.42.2.2 110 mm (minimum wall thickness 2.2mm) Each 127.60 24.00 3062.40

345 12.42.3 Single tee with door

345.1 12.42.3.2 110 x 110 x 110 mm (minimum wall thickness 2.2mm) Each 234.15 30.00 7024.50

346 12.33.4 Single tee without door

346.1 12.42.4.2 110 x 110 x 110 mm (minimum wall thickness 2.2mm) Each 221.35 30.00 6640.50

347.1 12.42.5.2 110 mm diameter (minimum wall thickness 2.2mm) Each 150.35 30.00 4510.50

Providing and fixing unplasticised -PVC pipe clips of approved design to

unplasticised - PVC rain water pipes by means of 50x50x50 mm hard

348 12.43 wood plugs, screwed with M.S. screws of required length, including

cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse

sand) and making good the wall etc. complete.

Providing and fixing factory made precast RCC perforated drain covers,

having concrete of strength not less than M-25, of size 1000 x 450x50

mm, reinforced with 8 mm dia four no longitudinal and 9 nos cross

349 23.9 sectional T.M.T. hoop bars, including providing 50 mm dia perforations Each 1399.95 45.00 62997.75

(Z*D>00 to 125 mm c/c, including providing edge binding with M.S. flats

of size 50 mmx 1.6 mm complete, all as per direction of Engineer-

WATER SUPPLY INSTALLATIONS

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot and cold water supply including all

CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at

1.00 m spacing. This includes jointing of pipes and fittings with one step

CPVC solvent cement and the cost of cutting chases and making good the

same including testing of joints complete as per direction of Engineer in

Charge. Concealed work including cutting

chases and making good the walls etc.,

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Concealed inside toilet)

350.1 18.8.2 20 mm nominal outer dia .Pipes. meter 537.60 180.00 96768.00

350.2 18.8.3 25 mm nominal outer dia .Pipes. meter 627.25 220.00 137995.00

350.3 18.8.4 32 mm nominal outer dia .Pipes. meter 739.30 100.00 73930.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot and cold water supply including all

CPVC plain and brass threaded fittings. This included jointing of pipes

and fittings with one step CPVC solvent cement, trenching, refilling and

testing of joints complete as per direction of Engineer in Charge.

351.1 18.9.5 40 mm nominal outer dia .Pipes. meter 563.05 82.00 46170.10

351.2 18.9.6 50 mm nominal outer dia .Pipes. meter 794.25 60.00 47655.00

351.3 18.9.7 65 mm nominal outer dia .Pipes. meter 1674.40 60.00 100464.00

Cutting holes upto 15x15 em in R.C.C. floors and roofs for passing drain

pipe etc. and repairing the hole after insertion of drain pipe etc. with

352 18.77 cement concrete 1:2:4 (1cement: 2 sand: 4 graded stone aggregate 20 Each 452.00 65.00 29380.00

mm nominal size) including finishing complete so as to make it leak

Supply & Installation, testing and commissioning of terras Tank

353 NDSR For Domestic Water Supply shoude complete as per direction of Set 209059.33 2.00 418118.65

Engineer in Charge.

Flow Rate : 1.50 LPS (1 Working + 1 Stand by)

Min. Motor HP : 2.2 H.P. (Each)

NDSR Sump Pumps

Supply & Installation, testing and commissioning of centrifugal non

clogging submersible sump pumps for plant room drainage. Pump

capable capable of handling 25 mm dia soft solids. Motor suitable for

354 415 + 10% volts, 3 phase, 50 Hz AC Power supply. Pumps shall be

suitable for automatic/manual operation (Overall depth of sump – 1.5

M). Submersible sump pump shall be provided with dry running

protection. Inclusive of supporting arrangement for stationary type.

Two nos. of pump installed in one sump pit 1 working & 1 standby with

automatic/manual opration as required.

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

354.1 NDSR Waste Water Drainage Sump Pump (PLANT ROOM) Each 114406.78 2.00 228813.55

Flow rate : 2 LPS

Head : 10 Mtrs.

Min. Motor HP : 2.0 (Each)

Supply & installation, testing & commissioning of sand filter having FRP

pressure vessel suitable for test pressure of 7 Kg. / cm2 including valves

for back-wash arrangement complete with initial charge of media to

remove the total suspended particles from the

Capacity : 1 LPS

355.1 NDSR Working Pressure : (5 ± 2.5)MWC Each 63997.62 2.00 127995.25

Supplying, storing, handling, installation, testing & commissioning of

Activated Carbon Filter having FRP pressure vessel suitable for test

356 NDSR pressure of 7 Kg./cm2 including valves for back-wash arrangement

complete with initial charge of media to remove the total suspended

particles from the water.

Capacity : 1 LPS

356.1 NDSR Working Pressure : (5 ± 2.5)MWC Each 152542.38 2.00 305084.75

Supplying, storing, handling, installation, testing & commissioning of

water softening system having FRP pressure vessel suitable for test

pressure of 7 Kg/cm2 including dished end, ion- exchange resin, Frontal

piping, C.I. diaphragm type valve, brine injection assembly for

regeneration of softener, brine measuring cum salt water tank, inter

connected flexible polypropylene MS Rubber lined (MSRL) piping,

valves including provision of bye-pass arrangement complete with

inside and outside painting etc. as required.

Receiving, storing, handling and fixing of PVC/HDPE/FRP tank for Brine

solution along with Hydraulic Injector with control valve and

piping for brine injection

Capacity :1 LPS

357.1 NDSR Working Pressure : (5 ± 2.5)MWC Each 125151.18 2.00 250302.37

Supplying and fixing of PVC/HDPE/FRP tank including electrical

operated metering/dosing pump for dosing of alum/sodium hypo-

chlorite solutions in pipeline (all contacting parts shall be of stainless

steel). Capacity - 0-12 LPH

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supplying & fixing of float based visual flow meter (Rotameter) suitable

for water flow rate of 2000 litres per hour in the input line of water

359 NDSR softener including matching flanges, nuts, bolts and 3 mm thick rubber Each 27732.20 2.00 55464.41

insertions/gaskets complete. to assess the water flow rate in water

Supply & installation, testing & commissioning of sand R.O FILLTER

AND TRANSFER PUMP FOR 5000 LITER PER HOUR

Capacity :1 LPS

Working Pressure : (5 ± 2.5)MWC

Flow Rate : 1.50 LPS (1 Working + 1 Stand by)

Min. Motor HP : 2.2 H.P. (Each)

Providing and placing on terrace (at all floor levels) polyethylene water

storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet and overflow

pipes but without fittings and the base support for tank.

[1] EXTERNAL SEWERAGE SYSTEM

SE SEWERAGE NETWORK

Excavating trenches of required width for pipes, cables, etc including

excavation for sockets, and dressing of sides, ramming of bottoms, depth

upto 1.5 m, including getting out the excavated soil, and then returning

the soil as required, in layers not exceeding 20 cm in depth, including

consolidating each deposited layer by ramming, watering, etc. and

disposing of surplus excavated soil as directed, within a lead of 50 m :

363 2.10.1 All kinds of soil

up to 1.50 m depth

363.1 2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre 352.15 250.00 88037.50

Extra for excavating trenches for pipes, cables etc. in all kinds of soil for

364 2.11 depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over metre 127.00 250.00 31750.00

corresponding basic item for depth upto 1.5 metre).

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing laying and jointing glazed stoneware pipes grade ‘A’ with stiff

365 19.1 mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine

sand) including testing of joints etc. complete.

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :

366 19.2 10 graded stone aggregate 40 mm nominal size) alround SW pipes

including bed concrete as per standard design.

Constructing brick masonry manhole with F.P.S. bricks in cement

mortar 1 : 4 (1 cement : 4 coarse sand) RCC top slab with 1 : 2 : 4 mix (1

cement : 2 coarse sand : 4 grade stone aggregate 20mm nominal size);

foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded

stone aggregate 40 mm nominal size) inside plastering 12 mm thick

with cement mortar 1:3 (1cement 3 coarse sand ) finished with a

floating coat of neat cement and making channels in cement concrete

1:2:4 (1cement : 2 coarse sand: 4 graded stone aggregate 20 mm

nominal size) finishd with a floating coat of neat cement complete as per

standard design

Inside size 90 x 80 cm & 45 cm deep including CI cover with frame (light

368 19.7.1 duty) 455 x 610mm internal dimension total wt. of cover & frame to be

not less than 38 kg (wt. of cover 23 kg and wt. of frame 15 kg)

368.1 19.7.1.1 With well burnt bricks each 12770.55 20.00 255411.00

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Providing orange colour safety foot rest of minimum 6 mm thick plastic

encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS

: 1786, having minimum cross section as 23 mmx25 mm and over all

minimum length 263 mm and width as 165 mm with minimum 112 mm

space between protruded legs having 2 mm tread on top surface by

ribbing or chequering besides necessary and adequate anchoring

projections on tail length on 138 mm as per standard drawing and

suitable to with stand the bend test and chemical resistance test as per

specifications and having manufacture's permanent identification mark

to be visible even after fixing, including fixing in manholes with

30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6

graded stone aggregate 20 mm nominal size) complete as per design.

Providing and fixing square mouth SW gully trap grade ‘A’ complete CI

grating brick masonry chamber with bricks of class designation 75 and

water tight CI cover with frame of 300 x 300 mm size (inside) the

weight of cover to be not less than 13.00 kg and frame to be not less

than 5 kg. as per standard design. (COVER MIN. 4.5 KG & FRAME

371 19.4.3 180x150 mm size P type With FPS bricks

371.1 19.4.3.1 With well burnt bricks each 2802.15 35.00 98075.25

Making connection of drain or sewer line with existing manhole

including breaking into and making good the walls, floors with cement

cincrete 1:2:4 mix (1cement: 2 coarse sand : 4 graded stone aggregate

372 19.21 20mm nominal size) cement plastered on both sides with cement

mortar 1:3 (1cement : 3 coarse sand) finished with a floating coat of

neat cement and making necessary channels for the drain etc. complete

for pipes 100 to 250mm dia.

372.1 19.21.1 For pipes 100 to 230 mm diameter Item 810.45 20.00 16209.00

SE DRAINAGE NETWORK

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Excavating trenches of required width for pipes, cables, etc including

excavation for sockets, and dressing of sides, ramming of bottoms, depth

upto 1.5 m, including getting out the excavated soil, and then returning

the soil as required, in layers not exceeding 20 cm in depth, including

consolidating each deposited layer by ramming, watering, etc. and

disposing of surplus excavated soil as directed, within a lead of 50 m :

All kinds of soil

up to 1.50 m depth

373.1 2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia METER 352.15 250.00 88037.50

Extra for excavating trenches for pipes, cables etc. in all kinds of soil for

374 2.11 depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over metre 127.00 60.00 7620.00

corresponding basic item for depth upto 1.5 metre).

Providing and laying non-pressure NP2 class (light duty) RCC pipes with

collars jointed with stiff mixture of cement mortar in the proportion of

1:2 (1 cement : 2 fine sand) including testing of joints

etc complete (for storm drainage)

Constructing brick masonry road gully chamber 50x45x60 cm with

bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm

precast R.C.C. horizontal grating with frame complete as per

standard design :

376.1 19.27.1 With well burnt bricks Each 5957.90 20.00 119158.00

Supplying & Installation of required capacity of single phase, 50

Hz,220V, deep well submersible pump Stainless Steel body, as per IS of

approved Make, suitable for 4"/6 " tube well with Control Panel Starter

suitable for Submersible pump with dry run protection, connections,

including clamps, bore cap etc. as required as per specifications but

excluding Pipe, SS/Nylon wire rope and connection

377.1 NDSR 3 H.P. with 15 to 17 stages, Head Mt 119-45, Discharge LPM 40- 125 each 27639.15 1.00 27639.15

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Supplying and laying of submersible flat cable ISI marked 3 core copper

wire of suitable size with proper clamping of approved make.

378.1 NDSR 6.0 Sq.mm multi strand per mtr 208.98 50.00 10449.00

Supplying and laying of approved Make HDPE pipe as per IS : 4984 and

IS : 14333 with latest amendment for installation of submersible pump

with necessary connection, socket/couplings, Tees,etc. as required (PE-

63 & working Pressure 10 kgf/sq cm)

379.1 NDSR 25 mm Outer Dia. per mtr 63.31 60.00 3798.60

380 NDSR Supplying and laying of approved Make Nylon rope 12 mm thick complete per withmtr

support of pump

60.00and motor. 3432.00

RAIN WATER HARVESTING

DESILTING CHAMBER (1 No.)

Earth work In excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30cm in depth. 1.5m in

381 2.6 width as per as 10 sq.m on plan) including disposal of excavated earth,

lead up to 50m and lift up to 1.5m, disposed earth to be levelled and

neatly dressed.

382 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides ofCu.M

etc. in layers not

in depth, consolidating Each deposited layer by ramm

383 2.26 Extra for every additional lift of 1.5 m or part there of in:

Providing and fixing up to floor two level precast cement concrete string

or lacing courses, copings, bed plates, anchor blocks, plain window sills,

shelves, louvers, steps, stair cases, etc. Including hoisting and setting in

position with cement mortar 1:3 (1 Cement : 3 sand), cost of required

centering, shuttering and finishing smooth with 6mm thick cement

plaster 1:3 (1 Cement : 3 sand) on exposed surfaces complete.

Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate (M 10) (With

20mm nominal size graded stone aggregate)

Centring and shuttering including strutting, proppintg etc. and

removal of form for:

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

385.1 5.9.3 Suspended floors,roofs, landings, balconies and access platform. Sq.M 927.25 2.00 1854.50

385.2 5.9.15 Small lintels not exceeding 1.5m clear span, moulding as in cornices, windowR.M.

sills, string392.15

courses, bands, 6.00

copings, bed plates,

anchor blocks and the like

Steel reinforcement for R.C.C. work including straightening, cutting,

386 5.22 bending,

placing in position and binding all complete above plinth level.

386.1 5.22.A.6 Thermo-Mechanically Treated bars.(TMT) Kg. 89.65 23.55 2111.26

Providing and laying in position machine batched and machine mixed

design mix M-25 grade cement concrete for reinforced cement concrete

work, using cement content as per approved design mix, including

pumping of concrete to site of laying but excluding the cost of centering,

387 5.33 shuttering, finishing and reinforcement, including admixtures in

recommended proportions as per IS: 9103 to accelerate, retard setting

of concrete, improve workability without impairing strength and

durability as per direction of Engineer-in-

(Note :- Cement content considered in this item is @ 330 kg/cum.

Excess/less cement used as per design mix is payable/recoverable

All works upto plinth level. Concrete of M25 grade with minimum

cement content of 330 kg/Cum

Brick work with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in foundation and plinth in:

388.1 6.1.2 Cement mortar 1:6 (1 cement : 6 sand) cum 7132.25 15.26 108838.14

389 13.1.1 12 mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand). Sqm 347.05 450.00 156172.50

Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff

390 19.1 mixture of cement mortar in the proportion of 1:1 (1 cement: 1 fine

sand) including testing of joints etc. complete:

Providing and fixing in position pre-cast R.C.C. manhole cover and

frame of required shape and approved quality

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

392.1 19.19.1.1 Rectangular shape 600x450mm internal dimensions Each 1437.65 2.00 2875.30

RECHARGE PIT (1 No.)

Earth work in excavation by mechanical means (Hydraulic excavator)

/ manual means in foundation trenches or drains (not exceeding 1.5m

393 2.8 in width or 10 Sq.M on plan) including dressing of sides and ramming ob

bottoms, lift upto 1.5m, including getting out the excavated soil and

disposal of surplus excavated soil as directed,

Extra for every additional lift of 1.5 m or part thereof in excavation

/banking excavated or stacked materials.

394.1 2.26.1 Depth exe. 1.5m but not exceeding 3.0m. Cu.M 126.80 22.60 2865.68

394.2 2.26.1 Depth exe. 3.0m but not exceeding 4.5m. Cu.M 126.80 15.05 1908.34

Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations etc. in layers not exceeding 20cm in depth,

consolidating Each deposited layer by ramming and watering , lead up

to 50 m and lift up to 1.5m.

Providing and fixing up to floor two level precast cement concrete string

or lacing courses, copings, bed plates, anchor blocks, plain window sills,

shelves, louvers, steps, stair cases, etc. Including hoisting and setting in

position with cement mortar 1:3 (1 Cement : 3 sand), cost of required

centering, shuttering and finishing smooth with 6mm thick cement

plaster 1:3 (1 Cement : 3 sand) on exposed surfaces complete.

Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate (M 10) (With

20mm nominal size graded stone aggregate)

Centring and shuttering including strutting, proppintg etc. and removal

397.1 5.9.3 Suspended floors,roofs, landings, balconies and access platform. Sq.M 927.25 67.00 62125.75

Digitally signed by SHUBHAM

Sl. No. (DSR- DESCRIPTION UNIT Rate Total Qty DSR Amount NDSR Amount

Reinforcement for R.C.C. work including straightening, cutting, bending,

399 5.22A placing in position and binding including cost of binding wire up to floor

two level including all wastage etc. complete.

399.1 5.22A.6 Thermo-Mechanically Treated bars.(TMT) Kg. 107.85 50.00 5392.50

Providing and laying in position specified grade of reinforced cement

concrete excluding the cost of centering, shuttering, finishing and

reinforcement - All work

up to plinth level :