Master Sewerage Scheme Faridabad- Repair and rehabilitation of IPS sec-33 and sec-37 Kanishka Tower of Badshahpur Zone, Faridabad and all other works contingent thereto.

Amount

Supply and Erection of PC batten /LED batten (20Wattage, 3000kCCT) , Product dimension in mm (1140x23x38) for surface and suspended applications. PC housing with PC diffuser and spring steel clamps for surface mounting arrangement.

Supply installation testing and commissioning of Pressure/Vacuum Gauge (-760 mmHG to 0) Bourdon Type SS Body 4 Inch Bottom Connection Glycerin Filled

Supply installation testing and commissioning of 25A Phase Corrector for Transformer

Supply installation testing and commissioning of 50A Phase Corrector for Pumps

Supply installation testing and commissioning of 10 Sqmm Aluminium 4 core armoured Cable.

Supply installation testing and commissioning of 70 watt LED street light (70Wattage, 5700k CCT) , Product dimension in mm (362x232x72)

Supply installation testing and commissioning of LED Post top 20watt street light (20Wattage, 5700k CCT) , Product dimension in mm (330x330x405)

Supply and erection of DN 600 PN 10 Electromagnetic flowmeter (600mm) for sewage water Technical Specifications for Electromagnetic Flowmeter Process Data Fluid : Sewage Water Operating Pressure : Please Specify Operating Temperature : 50 Deg. C. Electromagnetic Flow Sensor Model : Optiflux 2000 Type : Pulsed DC Meter size : Refer table below Flow tube : SS 304 Coil housing : Fully welded Sheet Steel, PU coated Liner : Hard Rubber Electrodes : SS 316 Grounding type : Rings Grounding ring material : SS 316 Process connection : Flanged to DIN PN10 (fully welded) Flanges : CS, SORF Area classification : Non-Hazardous Cable entry : M20 x 1.5 Protection class : IP 67 Electromagnetic Signal Converter Model : IFC 100 Cable length : 20 Meters. Mounting : Remote wall mounted Output : 4-20mA, HART plus Pulse/Frequency plus Status Accuracy : ± 0.5% of measured value Display : Large back lit LCD Display, fully programmable Parameters : Actual flow rate, totalized flow (10 digit), flow direction, flow velocity, conductivity, mass flow rate (at constant density) Diagnostics : Empty pipe detection, Electrode error, Noise, Coil temperature, Coil resistance, Conductivity etc Power supply : 85-250VAC, 48-63Hz Housing : Die cast Aluminium with PU finish Cable entry : M20 x 1.5 Area classification : Non-Hazardous Protection class : IP 67 Accessories : NA

Supply installation testing and commissioning of Horizontal dewatering motor Pump set of 2.5HP for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Engineer- in-Charge complete in all respect.

Supply installation testing and commissioning of mechanical coarse bar screen CW: 1000 mm CD: 4000 mm WD: 1500 mm Bar Spacing: 20 mm Bar Size: 10x50 mm Inclination: 75degree MOC: SS-304 alongwith Panel and Sensor for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Enginee- in-Charge complete in all respect.

Supply installation testing and commissioning of mechanical coarse bar screen CW: 1500 mm CD: 8000 mm WD: 1500 mm Bar Spacing: 20 mm Bar Size: 10x50 mm Inclination: 75degree MOC: SS-304 alongwith Panel and Sensor for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Engineer- in-Charge complete in all respect.

Supply installation testing and commissioning of SS body control Panel for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Engineer- in-Charge complete in all respect.

Supply installation testing and commissioning of Belt Conveyor for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Engineer- in-Charge complete in all respect.

Supply Installation Testing and Commissioning of rising spindle flush bottom CI Sluice Gate size(1000mmx1000mm) generally conform to IS:133-19 material detail 1 Frame, door, guide, extension, wedge, wall thimble, floor standard. CI. to IS 210 Gr. Fg 260 2 Spindle SS: 304 3 Seating faces SS :304/SSCF8 4 Wedge Block DI with SS AISI: 304/CF8 Lining 5 Lift Nut High ternide brass(HT2) 6Fastner (Thimble/Adjustable wedge) Stainless steel 7. Other fastners Carbon steel 8 Extension spindle SS: 304 9 Guide bracket CI to IS.210 Gr. Fg.260 10. Coupling SS AISI: 304 for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Enginee- in-Charge complete in all respect.

Supply Installation Testing and Commissioning of rising spindle flush bottom CI Sluice Gate size(500mmx500mm) generally conform to IS:133-19 material detail 1 Frame, door, guide, extension, wedge, wall thimble, floor standard. CI. to IS 210 Gr. Fg 260 2 Spindle SS: 304 3 Seating faces SS :304/SSCF8 4 Wedge Block DI with SS AISI: 304/CF8 Lining 5 Lift Nut High ternide brass(HT2) 6Fastner (Thimble/Adjustable wedge) Stainless steel 7. Other fastners Carbon steel 8 Extension spindle SS: 304 9 Guide bracket CI to IS.210 Gr. Fg.260 10. Coupling SS AISI: 304 for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Engineer- in-Charge complete in all respect.

Supply installation testing and commissioning of energy efficient 200W Lamps including fittings on High Mast complete in all respects (6 for High mast and 4 on building)flood light (200Wattage, 5700k CCT) , Product dimension in mm (350x285x85) for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Engineer- in-Charge complete in all respect.

Supply of Safety Equipment`s like gloves 2 pair, Fire extinguisher (min. 5), rubber mat (05meter) etc.

Supply installation testing and commissioning of Non Clog HORIZONTAL PUMPS of 725cum/hr@20m of 100HP for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Enginee- in-Charge complete in all respect.

Supply installation testing and commissioning of Non Clog HORIZONTAL PUMPS of 200cum/hr@18m of 30HP for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Enginee- in-Charge complete in all respect.

Supply installation testing and commissioning of Non Clog HORIZONTAL PUMPS of 100cum/hr@15m of 20HP for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Engineer- in-Charge complete in all respect.

Supply installation testing and commissioning of Non Clog Submersible PUMPS of 530cum/hr@20m of 75HP. for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Engineer- in-Charge complete in all respect.

Nicking cement concrete surface (over 28 days old including preparation and laying slurry) in sewer sumpwell including loading ,unloading and carriage of material lead within 5 KM

Bidder Name

Amount

M/s Shree Jee Enterprises(GSTN-NA)--1038585

Anil Dahiya Contractor(GSTN-NA)--1035870

M/s Shree Jee Enterprises

M/s Shree Jee Enterprises