REPAIR TO STEEL AND CERTAIN MAP FURNITURE INCLUDING PAINTING POLISHING ETC UNDER BSO OF GE WEST FEROZEPUR CANTT

Amount

ALMIRAH LARGE / MEDIUM STEEL Supply & fixing as in replacement of unserviceable Legs made out of PBI sheet 1 mm thick of almirah large steel including cutting, welding, turning, bending etc all as shown on drg, as specified and directed by Engineer-in-Charge/ GE.(FD-67(M), FD-350 & FD-1031)

All as per Ser item No. 1.00 here-in-before but replacement of unsv Shelves made out of PBI sheet 1 mm thick.

All as per Ser item No. 1.00 here-in-before but replacement of unsv Mild steel chromium plated(CP) handle 120 mm of approved quality

All as per Ser item No. 1.00 here-in-before but replacement of unsv Mild steel lock 65 mm with screw, key plate and keys of approved quality

All as per Ser item No. 1.00 here-in-before but replacement of unsv Locking device complete as per drg.

All as per Ser item No. 1.00 here-in-before but welding to Almirah large steel

LOCKER STTEL Supply & fixing as in replacement of unserviceable Legs made out of PBI sheet 1 mm thick of Locker steel including cutting, welding, turning, bending etc all as shown on drg, as specified and directed by Engineer-in-Charge/ GE.(FD-1029)

All as per item ser No 7 here in before but replacement of unsv bottom sheet made out of 1 mm thick ms sheet.

All as per Ser item No. 7.00 here-in-before but replacement of unsv Chromium plated(CP) handle 100 mm of approved make all as directed by Engineer-in Charge.

All as per Ser item No. 7.00 here-in-before but replacement of unsv MS hasp and stapple 75 mm.

TABLE DINING OR STEEL AL TOP Supply & fixing as in replacement of unserviceable Top made out of 19 mm thick block board commercial Ist quality covered with aluminium sheet 24 guage thick with steel screws(Note:- Blockboard shall be in one piece and joints etc in the length/width shall not be accepted in any case).unserviceable components/parts of table dining OR's steel including cutting, welding, turning, bending etc all as shown on drg, as specified and directed by Engineer-in-Charge/ GE. (FD-84(M)

All as per Ser item No. 11.00 here-in-before but replacement of unsv Top frame, side, legs and stiffeners made out of MS square conduit 25 mm having 1.6 mm wall thickness.

All as per Ser item No. 11.00 here-in-before but replacement of unsv PVC toe black in colour of good quality.

TABLE OFFICE OFFRS STEEL Supply & fixing as in replacement of unserviceableTable top made out of 18 mm thick Prelaminated particle board (Make- Novapan, wintuff, ActionTessa commercial quality bonded with phenol formal dehyde including hard wood (Teak) edging all around the table fixed with nails all as shown in drg. Note:- Joints in particle board shall not be accepted in any case) of table office Officer's steel including cutting, welding, turning, bending etc all as shown on drg, as specified and directed by Engineer-in-Charge/ GE:-

All as per Ser item No. 14.00 here-in-before but replacement of unserviceable drawer rcomplete including necessary denting, repairing, welding bottom channel complete all as directed.

All as per Ser item No. 14.00 here-in-before but welding toTable office officer steel

All as per Ser item No. 14 .00 here-in-before but replacement of unsv Rubber Shoes black in colour of approved quality.

TABLE OFFICE CLKS STEEL Supply & fixing as in replacement of unserviceableTable top made out of 18 mm thick Prelaminated particle board (Make- Novapan, wintuff, ActionTessa commercial quality bonded with phenol formal dehyde including hard wood (Teak) edging all around the table fixed with nails all as shown in drg. Note:- Joints in particle board shall not be accepted in any case) of table office Clk's steel including cutting, welding, turning, bending etc all as shown on drg, as specified and directed by Engineer-in-Charge/ GE:-

All as per Ser item No. 18.00 here-in-before but replacement of unserviceable drawer complete including necessary denting, repairing, welding bottom channel complete all as directed.

All as per ser item No 18 here-in-before but welding to table office clks steel

All as per ser item No 18 here-in-before but replacement of rubber shoe of approved quality.

TABLE 3X3 STEEL Supply & fixing as in replacement of unserviceable Table top made out of 18mm thick Prelaminated particle board (Make- Novapan, wintuff, ActionTessa teak faced bonded with phenol formal dehyde including hard wood (Teak) beading 19x6mm all around the table fixed with nails all as shown in drg. ( Note:- Joints in particle board shall not be accepted in any case). of table 900x900mm steel including cutting, welding, turning, bending etc all as shown on drg, as specified and directed by Engineer-in-Charge/ GE:-FD-1009

All as per Ser item No. 22.00 here-in-before but replacement of unserviceable MS square conduit 25 mm having 1.6 mm wall thickness as in legs, top rail/side rail and 'H' type stiffners.

All as per Ser item No. 22.00 here-in-before but welding to Table 3' x 3'

TABLE 3X2 STEEL WITHOUT DRAWER Supply & fixing as in replacement of unserviceable Table top made out of 18 mm thick Prelaminated particle board (Make- Novapan, wintuff, ActionTessa teak faced bonded with phenol formal dehyde including hard wood (Teak) beading 19x6mm all around the table fixed with nails all as shown in drg. ( Note:- Joints in particle board shall not be accepted in any case). of table 900x600mm steel without drawer including cutting, welding, turning, bending etc all as shown on drg, as specified and directed by Engineer-in-Charge/ GE:-FD-1007

All as per Ser item No. 25.00 here-in-before but replacement of unserviceable MS square conduit 25 mm having 1.6 mm wall thickness as in legs, top rail/side rail and 'H' type stiffners.

All as per Ser item No. 25.00 here-in-before but replacement of unserviceable PVC toe black in colour of good quality.

TABLE 3X2 STEEL WITH DRAWER Supply & fixing as in replacement of unserviceable Table top made out of 18 mm thick Prelaminated particle board (Make- Novapan, wintuff, ActionTessa teak faced bonded with phenol formal dehyde including hard wood (Teak) beading 19x6mm all around the table fixed with nails all as shown in drg. ( Note:- Joints in particle board shall not be accepted in any case). of table 900x600mm steel with drawer including cutting, welding, turning, bending etc all as shown on drg, as specified and directed by Engineer-in-Charge/ GE:-FD-1008

All as per Ser item No. 28.00 here-in-before but replacement of unserviceable MS square conduit 25 mm having 1.6 mm wall thickness as in legs, top rail/side rail and 'H' type stiffners.

All as per Ser item No. 28.00 here-in-before but replacement of unserviceable PVC toe black in colour of good quality.

All as per Ser item No. 28.00 here-in-before but replacement of unserviceable drawer complete including necessary denting, repairing, welding bottom channel complete all as directed.

CHAIR CBA STEEL Supply & fixing as in replacement of unserviceable bottom seat of chair CB steel with arms made out of 1st class seasoned hard wood sheesham duly caned with 2 to 2.5 mm wide white cane plastic as Godrej Pattern. Make SHAH/Premier including two coats of synthetic enamel paint black over coat of pink primer of chair CB steel with arm all as shown on drg, as specified and directed by Engineer-in-Charge/ GE. FD-75

All as per Ser item No. 32.00 here-in-before but replacement of unserviceable back.

All as per Ser item No. 32.00 here-in-before but replacement of unserviceable arm made from 1st class seasoned sheesham wood of chair steel with arms including two coats of synthetic enamel paint black over a coat of pink primer.

All as per Ser item No. 32.00 here-in-before but S & F flat iron 535x25x6 mm as in stiffener to support seat frame of chair CB steel with arms including cutting welding etc.

CHAIR CBB STEEL Supply & fixing as in replacement of unserviceable bottom seat of chair CB steel without arms made out of 1st class seasoned hard wood sheesham duly caned with 2 to 2.5 mm wide white cane plastic as Godrej Pattern. Make SHAH/Premier including two coats of synthetic enamel paint black over coat of pink primer of chair CB steel without arm all as shown on drg, as specified and directed by Engineer-in-Charge/ GE. FD-75

All as per Ser item No. 36.00 here-in-before but replacement of unserviceable back.

All as per Ser item No. 36.00 here-in-before but S & F flat iron 420x25x6 mm as in stiffener to support seat frame of chair CB steel without arms including cutting welding etc.

FMN SET Painting of FMN set of charpoy GI pipe/newar with black Japan paint with brush including welding complete all as specified and directed by Eng- in-Charge/ GE.

FORM WITHOUT BACK Removing old unsv parts/ components of form without back off size/shape and materials all as specified and directed as shown on drg. Replacement of unsv wooden planks made of 2nd class hard wood 1525x255x25mm thick fixed with GI nut & bolt 65mm x 6mm with washer complete all as specified and directed as shown on drg.

M&L for French polish on wooden plank and 2 coat of synthetic enamel paint over a coat of primer on steel surface.

TEAPOY VARANDAH STEEL Supply & fixing as replacement of the following unsv component/parts of Teapoy verandah steel including cutting, welding, turning bending etc complete all as specified and shown in drg Teapoy top made out of 18mm thick Prelaminated particle board (Make- Novapan, wintuff, ActionTessa of white bonded with phenol formal dehyde including hardwood (Teak) beading 19x6mm all around the table fixed with nails all shown in drg.

Replacement of MS Flat iron 490x20x3mm to be welded with frame under bottom seat complete all as specified and directed

Replacement of unsv rubber shoes of approved quality to teapoy verandah complete all as specified and shown on drg

Chair Computer (FD/E6/MAP/01) Supply & fixing as in replacement of unserviceable acrylic fiber of approved shade of seat & back of chair computer as shown on drg, as specified and directed by Engineer-in-Charge

Replacement of armrest made of black integral skin polyurethane reinforced of Chair Computer as shown on drg, as specified and directed by Engineer-in-Charge

Replacement of Gas lift Mechanism with 100mm stroke length of Chair Computer as shown on drg, as specified and directed by Engineer-in-Charge

Replacement of pedestal of size 700mm with 05 Nos of nylon twin coaster wheels of chair computer as shown on drg, as specified and directed by Engineer-in-Charge

Replacement of twin wheel nylon coaster wheels of chair computer as shown on drg, as specified and directed by Engineer-in-Charge

Chair Writing MAP (FD/E6/MAP/12) Spply & fixing as in replacement of unserviceable acrylic fiber of approved shade of seat & back of chair Writing as shown on drg, as specified and directed by Engineer-in-Charge

Replacement of armrest made of black integral skin polyurethane reinforced of Chair Writing as shown on drg, as specified and directed by Engineer-in-Charge

Charpoy GI pipe : Removing of old unsv newar from charpoy GI pipe and supply and fixing new 12 mm thick plywood BWR grade ISI Marked with 75 mm long x 6 mm dia full threaded nut and bolts with washer in bothside by drilling 2 Nos of hole in long rail and 2 Nos of hole on short rails. Corners of plywood fixed on charpoy should be rounded off properly complete all as specified and directed by Engineer - in -Charge. Make : Archid/Green ply/Kitply.

S & F new iron strip of size 900x30x5 mm thick duly black painted in 2 Nos on long rails below ply wood top.

Removal of unsv long rail from existing frame of charpoy of GI pipe and supply and fixing of new long rail made out of GI pipe 32mm nominal bore medium grade all as specified and shown on drg.

Removal of unsv short rail from exiting frame of charpoy of GI pipe and fixing of short rail made from unsv long rail retrieved from charpoy GI pipe against Ser No. 54 above after cutting threading of both ends to the requires size complete all as specified and shown on drawing.

Removal of unsv leg from existing frame of charpoy GI pipe and fixing legs by making from unsv short rail retrieved from charpoy GI pipe as per item No. 55 here-in-before including cutting threading complete and providing best quality PVC shoe to the legs of charpoy GI pipe . Rest all as specified and directed by Engineer-in-Charge.

Removal of unsv elbow three way 32mm bore from existing frame of Charpoy GI pipe and supply and fixing new elbow GI three way32mm bore medium grade ISI marked all specified and shown on drawing.

Removal of unsv check nuts from existing frame of charpoy GI pipe & supply and fixing new check nuts GI 32mm bore medium grade ISI marked all specified and shown on drawing.

Tightening of charpoy GI frame complete all as per drawing.

Welding of FMN clamps to the legs of charpoy GI pipe all as per drawing

Bed Hard Map :Removing of old unsv plywood from Bed Hard MAP and supply and fixing new 12 mm thick plywood BWR grade ISI Marked of required size and shape including supply & fixing necessary nut and bolts and washer whereever required to Bed Hard MAP. Rest all as specified and directed by Engineer - in -Charge. Make : Archid/Green ply / Kitply

Charpoy MS Pipe : Removing of old unsv plywood from Charpoy MS Pipe and supply and fixing new 12 mm thick plywood BWR grade ISI Marked with supply & fixing necessary nut and bolts including washer to bothside of Charpoy MS pipe Rest all as specified and directed by Engineer - in -Charge. Make : Archid/Green ply / Kitply

Charpoy Folding : Removing of old unsv plywood from charpoy folding and supply and fixing new 12 mm thick plywood BWR grade ISI Marked with necessary nut, bolts and washers to Charpoy folding . Corners of plywood fixed on charpoy should be rounded properly complete all as specified and directed by Engineer - in -Charge. Make : Archid/Green ply / Kitply

POLISHING TO WOODEN FURNITURE Material and labour to French polish for wooden surface of Hat Stand with mirror articles where-ever applicable as per drg including cleaning and preparing the surface with one or more coat all as specified and directed.FD-23(M)

All as per Ser item No. 64.00 here-in-before but on Chair dining. FD-279/MAP

All as per Ser item No. 64.00 here-in-before but on Chair easy.FD-229

All as per Ser item No. 64.00 here-in-before but on Chair wooden bottom.FD-229

All as per Ser item No. 64.00 here-in-before but on Table dining 4/6/8 persons. FD-30(M)

All as per Ser item No. 64.00 here-in-before but on Table 900mmx600mm with /without drawer.FD-42(M)

All as per Ser item No. 64.00 here-in-before but on Bed Plywood.

All as per Ser item No. 64.00 here-in-before but on Book Case.

All as per Ser item No. 64.00 here-in-before but on side board.

All as per Ser item No. 64.00 here-in-before but on Sofa set 5/4 seated

All as per Ser item No. 64.00 here-in-before but on Table dressing ladies

All as per Ser item No. 64.00 here-in-before but on Table dressing gents

All as per Ser item No. 64.00 here-in-before but on Table peg FD-384

All as per Ser item No. 64.00 here-in-before but on Teapoy. FD-382

All as per Ser item No. 64.00 here-in-before but on Table centre. FD-274

All as per Ser item No. 64.00 here-in-before but on Table bed side

All as per Ser itemNo. 64.00 here-in-before but on Chair writing. FD-280

All as per Ser item No. 64.00 here-in-before but on Table writing/med. FD-33(M)

All as per Ser item No. 64.00 here-in-before but on Table office clk.

PAINTING TO STEEL FURNITURE Material & labour for painting to Almirah steel medium with shelves complete internal and external including top and bottom. after preparation of old painted surface and making smooth surface for spray painting inside/outside with synthetic enamel paint olive green, black or white shaded as per drawing & directed by Eng- in-Charge. FD-67(M)

All as per Ser itemNo. 83.00 here-in-before but on Almirah steel medium with shelves complete external including top & bottom. FD-67(M)

All as per Ser item No 83.00 here-in-before but on almirah large with shelve complete internal and external including top and bottom.FD-1031

All as per Ser itemNo. 83.00 here-in-before but on almirah large with shelves complete external including top and bottom.FD-1032

All as per Ser itemNo. 83.00 here-in-before but on Locker steel complete internal and external including top, bottom & shelves.FD-222

All as per Ser itemNo. 83.00 here-in-before but on Locker steel complete external including top & bottom and shelves.FD-223

All as per Ser item No. 83.00 here-in-before but on Form without back

All as per Ser itemNo. 83.00 here-in-before but on Table office clerk steel.FD-84(M)

All as per Ser itemNo. 83.00 here-in-before but on Table office officer steel.FD-84(M)

All as per Ser item No. 83.00 here-in-before but on Table 900x900x760 steel.FD-1009

All as per Ser itemNo. 83.00 here-in-before but on Table 900x600x760 steel with drawer/without drawer.FD-1007

All as per Ser itemNo. 83.00 here-in-before but on Teapoy verandah.FD-255

All as per Ser itemNo. 83.00 here-in-before but on Chair CB steel with or w/o arms.FD-75(M)

All as per Ser itemNo. 83.00 here-in-before but on Rack/ Book Case steel.

All as per Ser item No. 83.00 here-in-before but on Chair verandah.FD-256 & 259

All as per Ser item No. 83.00 here-in-before but onTable dining OR steel AL top FD-84(M)

All as per item ser No 83.00.here in before but painting to Bed Hard MAP complete all as directed by Engineer-in Charge.

All as per item ser No 83.here in before but to charpoy MS pipe complete all as directed by Engineer-in Charge.

All as per item ser No 83 here in before but to charpoy Folding complete all as directed by Engineer-in Charge.

Sethi and Company

M/s Sham and Company

M/S Yashpaul Gulati

S S BUILDERS

M/S CHAWLA CONSTRUCTION COMPANY

shivam builders

M/s Sarup Singh