REPAIR MAINT OF HIGH MAST LIGHT, STREET LIGHT, STREET LIGHT, TIMER PANEL AND CONNECTED ITEMS AT ROORKEE CANTT, SAHARANPUR AND PURKAZI UNDER GE ROORKEE

Amount

Inspection / checking of street light fittings, Tower light fittings and High mast lights (up to 16 mtr height) such as T5 FTL 4X24/40/36 Watt security light fittings, HPSV / HPMH fittings 400Watt (indoor and outdoor type) and flood light up to 400 watt in Indoor stadium, LED light all types of any wattage (flood and roadway luminaries) and post top light fittings etc for finding faults including thoroughly cleaning of acrylic perpex cover and refixing the same in existing position after carrying out necessary repair / replacement of defective parts or replacing with new light fittings (new light fitting shall be measured and paid for separately at supply only rates), connecting to elctric connection and testing complete all as specified and directed.

Notes for Srl Item No. 1.00 :- (i) Detection & rectification of fault in over head / underground line shall be done by the contractor & cost of the same shall be deemed to be included in the unit rate of this item. (ii) The labour charges and cost of minor spare parts shall be deemed to be included in this item and major parts such as light fittings/ drivers / MS brackets etc, replaced in day to day maint, shall be measured and paid for separately at supply only rates against relevant item Nos 2.00 to 27.00 of Schedule 'A' (iii) The Contractor shall provide one electrician and one helper along with 24 steps bamboo ladder or sky lifter vehicle for repairing and carryingout day to day complaints. The contractor or his authorised representative will report to JE E/M I/C or Engineer-in-Charge of External Electrification Section to collect the complaint /Job slips at 0830 Hrs. (iv) All routine/urgent complaints received on Complaint / Job slips shall be attended and repaired immediately and the same shall be deposited to JE E/M within 24hrs duly signed by the users. In case of any delay in attending the complaint more than 24hrs after handing over of routine/urgent works, the contractor shall be liable to pay the penalty for the delayed period @ Rs. 1000/- per day or part there of. (v) The set of labour and equipments shall be mobilised and cover entire area of Roorkee Cantt and Purkazi only. (vi) All the 'Supply only' items shall be taken on charge through RV duly verified by AO, GE Roorkee and then shall be issued to the contractor to incorporate in the work in day to day maintnance and copy of all RVs duly supported verified PVs to be submitted with RAR/FB.

Supply only lamp holder, B-22 base with LED bulb 30 watts suitable for B-22 base, 5700K, fxed on post-top lantern fittings complete all as specified and directed. Make - Syska Cat Part No. SSK-HPB-40W, Havells Cat Part No. LED FLORIDA ULTRA 30W or Philips Cat Part No.Tforce Core 47W/4000lmE27

Supply only new security light fittings LED 25 watt with secondary lens luminaries IP 66, 5700K, with inbuilt surg diverter with 02 Years warranty with manufacturer's guarantee certificate complete with all accessories as directed by Engineer-in-Charge. Make:- Orient Cat Part No. LSFT-025-C-PC, Havells Cat Part No. ENDURAPEARLSL25WLED 757SASYTOPCMP or Crompton Cat Part No. TRP-400-25-57-SL-LM-NSR.

Supply only new security light fittings LED 45 watt with secondary lens luminaries IP 66, 5700K, with inbuilt surg diverter and 05 years warranty with manufacturer's guarantee certificate complete with all accessories as directed by Engineer-in-Charge. Make:- Orient Cat Part No. LSFT-045-CT, Havells Cat Part No. ENDURAPEARLNEOSL45WLED 757PASYTOPC or Crompton Cat Part No. TRP-409-45-57-SL-NS-GL-NSG.

Supply only new security light fittings suitable for LED 60 watt with lens and 05 years warranty with manufacturer's guarantee certificate complete with all accessories as directed by Engineer-in-Charge. Mare:- Orient Cat Part No. LSFT-060-CT, Havells Cat Part No. ENDURAPEARLNEOSL60WLED757 PASYTOPC or Crompton Cat Part No. TRP-409-60-57-SL-GL-NSG.

Supply only new security light fittings suitable for LED 90 watt with lens and 05 years warranty with manufacturer's guarantee certificate with manufacturer's guarantee certificate complete with all accessories as directed by Engineer-in-Charge. Make :- Orient Cat Part No. LSFT-090-CT, Havells Cat Part No. ENDURAPEARLPLUSSL90WLED757 PASYTOPCASTHO or Crompton Cat No. TRP-411-90-57-SL-GL-NSG.

Supply only new flood light fittings with manufacturer's guarantee certificate, suitable for LED 120 watt IP 66 with lens & all accessories, out door type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete all as specified and directed by Engineer-in-Charge. Make:- Orient Cat Part No. LFSMU-120-C, Havells Cat Part No. JETAIRISFLS 120WLED757APWBLT G or Crompton Cat Part No. LFLN-120-CDL/60-M.

Supply only new flood light fittings with manufacturer's guarantee certificate, suitable for LED 150 watt IP 66 with lens complete with all accessories as directed by Engineer-in-Charge. Make:- Orient Cat Part No. LFSMU-150-C, Havells Cat part No. JETAIRISFLS 150WLED757PSYMLT G or Crompton Cat Part No. LFLN-150-CDL/60-M.

Supply only new flood light fittings with manufacturer's guarantee certificate, suitable for LED 200 watt IP 66 with lens complete with all accessories as directed by Engineer-in-Charge. Make:- Orient Cat Part No. LFSMU-200-C, Bajaj Cat Part No. BJFL 200W LED I or Crompton Cat Part No. LFLN-200-WW/60-M

Supply only new LED Highbay light fittings with manufacturer's guarantee certificate, 100 watt capacity with PDC aluminium with reflactor including making electrical connection from ceiling rose to light fitting complete all as directed by Engineer-in-Charge. Make:- Orient Cat Part No. LHVXS-100-C, Havells Cat Part No. SAUCERGENXPROHBP100WLED 757P60DBOLT G or Crompton Cat Part No. LHB11-100-CDL/60-HPM.

Supply only PVC insulated cable three core 1.5 Sqmm PVC Insulated with multi stranded copper conductor for making connection from junction box to light fitting with copper lugs of suitable size complete all as specified and directed.

Supply only PVC insulated cable three core 2.5 Sqmm PVC Insulated with multi stranded Copper conductor for making connection from junction box to light fitting with copper lugs of suitable size complete all as specified and directed.

Supply only Driver for LED fitting 30 watt as per existing Make & Model complete all as specified and directed.

Supply only Driver for LED fitting 45/50 watt as per existing Make & Model complete all as specified and directed.

Supply only Driver for LED fitting 60 watt as per existing Make & Model complete all as specified and directed.

Supply only Driver for LED fitting 120 watt as per existing Make & Model complete all as specified and directed.

Supply only Driver for LED Flood fitting 50 watt as per existing Make & Model complete all as specified and directed.

Supply only Driver for LED Flood fitting 100/120 watt as per existing Make & Model complete all as specified and directed.

Supply only MS bracket made out of GI tubing 40 mm dia, light grade 1.5 mtr long including fixing with MS clamps - 2 Nos made out of 50x5mm flat iron, MS nuts & bolts 75 mm long 12 mm dia - 4 Nos & 3mm thick MS washer - 01 No. for each including painting with two coats of aluminium paint over one coat of red oxide primer to MS clamps & bracket etc complete all as specified and directed.

Supply only, PVC Junction box of size 350 x 250 x 150 mm with Aluminium bus bars 04 Nos fixed on pole with the help of MS nuts & bolts and MS clamp -1 No. made out of 40 X 5mm flat iron with one No. MCB SP 6 Amps capacity including making suitable hole in existing pole to take out connections to fitting if required at site and provn of cable glands of suitable size for incoming and outgoing cables complete all as specified and directed.

Supply only, PVC Junction box of size 250 x 200 x 105 mm with Aluminium bus bars 02 Nos fixed on pole with the help of MS nuts & bolts and MS clamp -1 No. made out of 40 X 5mm flat iron with one No. MCB SP 6 Amps capacity including making suitable hole in existing pole to take out connections to fitting if required at site and provn of cable glands of suitable size for incoming and outgoing cables complete all as specified and directed.

Supply only, MCB triple pole & neutral (TPN), 63 Amps, 415 Volt 'B' curve 10 kA, IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area including copper lugs of suitable size complete all as specified and directed.

Supply only, MCB triple pole (TP), 40 Amps, 415 Volt 'B' curve 10 kA, IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area including copper lugs of suitable size complete all as specified and directed.

Supply only, MCB single pole & neutral (SPN), 20 to 32 Amps, 240 Volt 'B' curve 10 kA, IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area including copper lugs of suitable size complete all as specified and directed.

Supply only, MCB single pole (SP), 6 to 32 Amps, 240 Volt 'B' curve 10 kA, IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area including copper lugs of suitable size complete all as specified and directed.

Supply only, new street light timer panel suitable for single phase supply including astronomical digital timer, contactor single phase, MCB SPN 40 Amps for incomer and outgoing for overload and short circuit protection, 40 Amps, 240 Volt complete all as specifieied and directed.

Supply only, new street light timer panel suitable for three phase supply including astronomical digital timer, contactor three phase, MCB TPN 63 Amps for incomer and outgoing for overload and short circuit protection, 63 Amps, 440 Volt complete all as specified and directed.

Excavation in trenches in soft/loose soil n.exc 1.5 mer wide and n.exc 1.5 m in depth for foundations of poles / stays / struts, trenches for laying of pipes/ cables etc n.exc 10 Sqm on plan and getting out excavated earth, forming bottom surfaces to required level complete all as specified and directed.

All as per srl item No. 28.00 above but depth of excavation exc 1.50m and n.exc 3.00m.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick in soft/loose soil complete all as specified and directed.

Removing surplus spoil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified and directed.

Supply and laying river sand for cushioning of cables with layers of sand 8 cm before lying of cable and 15 cm after lying of cable (total 23 cm) in trenches complete all as specified and directed. Note: Thickness of sand cushioning shall be measured as 18cm after punning for payment purpose.

Supply and laying brick protection cable cover using old size sub class ‘B’ bricks, laid flat adjacent to each other across the length of cable, laid dry, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement, 50 mm bore GI pipe light grade for cable protection (ISI marked) with all fittings and fixed to walls/poles and ceilings or laid in floors/trenches complete all as specified and directed.

S&F in replacement, 40 mm bore GI pipe light grade for cable protection (ISI marked) with all fittings and fixed to walls/poles and ceilings or laid in floors/trenches complete all as specified and directed.

S&F in replacement, 32 mm bore GI pipe light grade for cable protection (ISI marked) with all fittings and fixed to walls/poles and ceilings or laid in floors/trenches complete all as specified and directed.

Taking out old unserviceable PCC/Steel electric pole (9.00 m long) including demolition of existing PCC etc for takingout the pole/struts etc and S&F new steel tubular pole of designation 410 SP-31 (9.0 mtr long) conforming to IS:2713 Part-II with cast iron base plate, finial taper, plug, bolts, nuts & washers as specified including re-fixing of old accessoreis such as ACSR/AAC conductor, cables, street light fittings, clamps, nuts & bolts etc, removed from old pole complete all as specified and directed by Engineer-in-Charge. Note :- Earthwork and PCC work for fixing new pole / struts shall be measured and paid for separately against the relevant item of Schedule 'A'.

M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation to poles / stays / struts or basements etc complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundation to poles / stays / struts or basements etc including cost of form work and finished fair & even complete all as specified and directed.

M&L for PCC work (1:2:4) type B-1 (20 mm graded stone aggregate) as in coping (new and old damaged coping) to poles / stays / struts or basements etc complete all as specified and directed.

S&F in replacement, new Alpha Rex3, D22 Astro 1 channel astronomical digital timer switches including necessary connection complete all as specified & directed.

S&F in replacement, power contactor 3 Phase with AC coil 220 Volts, 32 Amps, CN432 T01 type including making all connections complete all as per Havells Cat Part No. IHPAA018201* including Auxilary Contact side Block, Frame size - 2 as per Havell Cat Part No. ISPNASM611 or any equivalent model in Legrand / C&S complete all as specified and directed by Engineer-in-Charge.

Supply & laying in replacement & testing XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100V grade, cross sectional area as given below:-

4 core 10 Sqmm.

4 Core 16 Sqmm

4 Core 25 Sqmm

2 Core 25 Sqmm

2 Core 16 Sqmm

2 core 10 Sqmm

3.5 core 35 Sqmm

M&L for horizontal boring of hole under road, pavement, hard standing by trenchless technology using GI Pipe of required dia and necessary machine suitable for 0.4 mpa working pressure complete all as specified and directed by Engineer-in-Charge. Note:- GI pipe shall be measeured and paid for saperately against respected item of Schedule 'A' (BOQ).

Supply only PVC electric cable with insulated aluminium conductor (stranded) with inner sheathing of PVC tape and overall PVC sheathed 1100 volts grade, heavy duty, 16 Sqmm twin core, weather proof flat with accessories, complete all as specified and directed.

All as per serial item No. 45.00 above but cable of size 10 Sqmm twin core

All as per serial item No. 45.00 above but cable of size 6 Sqmm twin core

All as per serial item No. 45.00 above but cable of size 4 Sqmm twin core

Taking down defective 25/36/40/45/60/250 Watts LED / SV / MH light fittings, street light fittings mounted on pole / building on bracket disconnecting, testing all components, dismantling of defective components such as choke, ignitors, holders, capacitors and providing PVC cable for wiring lamps, including cleaning of cover, connecting and testing the street light fitting after fixing new components and trimming of branches if obstacle for lights to illuminate the area and then mounting to its original position and making the fitting functional complete all as specified and directed by Engineer in Charge at site.

Taking down defective 90 Watt LED light fittings mounted on 11 m long Semi high mast consisting of LED flood light fittings (Approx 4 to 6 Nos), street light fittings mounted on 11/13 m long high mast pole on bracket / round ring, disconnecting, testing all components, dismantling of defective components such as driver of LEDs and cleaning of cover, connecting and testing the street light fitting after fixing new components and then mounting to its original position and making the fitting functional complete all as specified and directed by Engineer in Charge at site.

Taking down defective 250/400 Watt SV / MH lamp type light fittings, High mast light fitting through motorised / manual system, mounted on 21 m long high mast pole on bracket / round ring, disconnecting, testing all components, dismantling of defective components such as choke, igniters, holders, capacitors, and providing new PVC cable for wiring lamps including cleaning of cover, connecting and testing the light fitting after fixing new components and then mounting to its original position and making the fitting functional all as specified and directed by Engineer in Charge at site. Note for item No. 49.00 to 51.00: (i) No T&P shall be issued by the Department (ii) The rate quoted by contractor shall include cost of starter, bipin holder, PVC wire, capacitors, required for maintenance of Street Lights for TL fitting/HP / SV fittings. (iii) The rates shall also include repairing of defective street light timers, fault in street light feeders etc (iv) During whole period of currency of the contract, any fitting shall only be considered once for the payment purposes. (v) Spares such as choke, ignitors, driver of LEDs, lamps, holders (supplied by contractor) shall be paid and measured separately against appropriate item of Schedule 'A'.

S&F in replacement, PVC insulated and PVC sheathed cable of size 1.50 Sqmm, three core stranded aluminium conductor complete all as specified and directed.

S&F in replacement, MS bracket made of 40mm dia bore GI pipe, light grade 1.20 m long, bend to shape as per site requirement, fixed to pole with 40 x 5mm flat iron clamps - 02Nos with nuts & bolts, washers including painting two coats of aluminium paint over a coat of primer all as specified and directed by Engineer-in-Charge.

S&F 120 degree angle LED street light adjustable bracket angle comptible to all light fittings on bracket complete all as specified and directed

Taking down old unserviceable fitting of any type and description and S&F new LED flood light luminaries of 250 Watt with pressure die cast aluminium housing with sealed toughened glass cover in frame, IP 65 protection including all fixing arrangements, nuts, bolts and washers, connecting to electric system with 2.5 Sqmm PVC aluminium stranded conductor 2 core up to required length and fixed on 11 Mtr long pole complete all as specified and directed.

Taking down old unserviceable security light fittings and S&F new generation energy saving & environment friendly, powder coated pressure die-cast aluminium IP65 roadway luminaries with LEDs with lens as light source & exclusively designed along with electronic driver type street light fitting suitable for 90/100 watt capacity LED lamp with and including all accessories duly pre-wired, fixing on existing bracket for street light on LT pole / wall complete all as specified and directed.

Taking down old unserviceable security light fittings and S&F new generation energy saving & environment friendly, powder coated pressure die-cast aluminium IP65 roadway luminaries with LEDs with lens as light source & exclusively designed along with electronic driver type street light fitting suitable for 60 watt capacity LED lamp with and including all accessories duly pre-wired, fixing on existing bracket for street light on LT pole / wall complete all as specified and directed.

Taking down old unserviceable security light fittings and S&F new generation energy saving & environment friendly, powder coated pressure die-cast aluminium IP65 roadway luminaries with LEDs with lens as light source & exclusively designed along with electronic driver type street light fitting suitable for 45 watt capacity LED lamp with and including all accessories duly pre-wired, fixing on existing bracket for street light on LT pole / wall complete all as specified and directed.

Taking down old unserviceable security light fittings and S&F new generation energy saving & environment friendly, powder coated pressure die-cast aluminium IP65 roadway luminaries with LEDs with lens as light source & exclusively designed along with electronic driver type street light fitting suitable for 25 watt capacity LED lamp with and including all accessories duly pre-wired, fixing on existing bracket for street light on LT pole / wall complete all as specified and directed.

S&F in repairs, Astronomical+Digital Time switch complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, nature time switch single phase model swadeep - 02 sensor only alongwith switching timer complete all as specified and directed by Engineer-in-Charge.

S&F in replacement contactor 65 Amps, 3 phase, 415 Volt as per IS 13947-4-1, suitable for nature time switch model swadeep - 02 complete all as specified and directed by Engineer-in-Charge.

S&F in replacement, contactor 95 Amps single Phase , 240 Volt as per IS 13947-4-1, suitable for nature time switch model swadeep - 02 complete all as specified and directed by Engineer-in-Charge.

S&F in replacement, contactor 32 Amps 3 phase, 415 Volts as per IS 13947-4-1, suitable for nature time switch model swadeep - 02 complete all as specified and directed by Engineer-in-Charge.

S&F in replacement, street light timer panel, single phase with maximum load of 12 KW with inbuilt astronomical time switch, 65 Amps contactor, 63 Amps SPN confirming to IS / IEC/ 604947-4-1, FRLS internal wiring with IP 54 protection and inbuilt short circuit protection complete all as specified and directed at site.

S&F in replacement, DK thermoplastic cable junction box IP 65 with metric knockouts for cable entry, weather proof for outdoor installation including glands and 4 terminals for terminating one incoming and outgoing UG cable of size 10/16 Sqmm 2/4 core and fixed to the PSC/Steel Poles by means of suitable size of clamps with nut & bolts including provn for fixing 01 No of single pole MCB 6-32 Amps,10 kA and 01 No. MCB TPN 6-32 Amps, 10 KA, ‘B’ series inside the box complete all as specified and directed.

S&F in replacement, LED driver 75 watt, single phase , 240 Volt for LED street light fittings complete all as specified and directed by Engineer-in-Charge.

S&F in replacement, LED driver 60 watt, single phase , 240 Volt for LED street light fittings complete all as specified and directed by Engineer-in-Charge.

S&F in replacement, LED driver 45 watt, single phase , 240 Volt for LED street light fittings complete all as specified and directed by Engineer-in-Charge.

S&F in replacement, surge protection device compatible with outdoor LED fixture, for LED light fitting with rated power up to 75 Watt complete all as specified and directed.

S&F in replacement, 1100 Volt grade heavy duty twin core flat or circular of size 6.00 Sqmm cable, PVC insulated solid aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed on Highmast pole connections, for external connections, PVC conduit of 15mm to be used, duly binded to the pole all as specified.

Supply only PVC insulated multistrand copper cable three core, 1.00 Sqmm for connections of building / security light fittings complete all as specified and directed.

S&F in replacement, MCCB 250 Amps, 4 pole, 25 kA with thermal magnetic release setting and 100% Icu complete all as specified and directed.

Supply only Insulation electric tape roll 20 mm 25 mtr long complete all as specified and directed.

M&L for cleaning and scrapping the old surfaces of single electric pole structure and applying two coats of aluminium paint over a coat of red oxide primer on all steel structure mounted on pole such as cross arms , clamps, bolts, nuts, brackets etc including painting of 300mm wide black & yellow strips with two coats of synthetic enamel paint in alternative manner from bottom to upward of LT pole up to a height of 1.50 m above the embedded portion and writing pole number complete all as specified and directed by Engineer-in-Charge. Note: - (i) The pole and connected structure surfaces shall be cleaned / scrapped with steel brush to remove old paint completely and preparing the surfaces to recieve new paint. (ii) The pole shall be numbered as directed by by JE I/C / Engineer-in-Charge at site. (iii) The painting of poles etc shall be carrieout to the entire satisfaction of JE I/C /Engineer-in-Charge

M&L for prunning of tree branches of any sizes and dia, not less than 2 m around the LT /HT OH line which obstructing the power supply / maintenance of electric supply as well as illumination in area including repairs to damaged broken ACSR conductors, GI wires and jumpers and disposed off exc 50 m away, clearing area and testing of line complete all as specified and directed. Note : (i) Span length is aproximate 40 to 50 m. (ii) Rate quoted are inclusive of repair to damage work in item.

Taking down existing earthing of any description and M&L for new earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI earthing wire 4mm dia size by means of GI bolts, nuts, check nuts and washers, earthing wire protected by GI pipe 20 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6) type C1 in chamber of size not less than 300x300x300mm (internal diamentions) with cover made of RCC (1:2:4), type B-1, reinforced with 8 mm dia TMT bars @ 15 cm C/C both ways and angle iron 40X40X5mm frame etc duly painted with two coats of synthetic enamel paint over a coat of red oxided primer on exposed surfaces complete all as specified and directed by Engineer-in-Charge. Note: The unit rate includes earthing wire and protection pipe upto maximum 7.5 metre from earth plate, earth point / test point.

Taking down carefully and S&F new security light fittings LED 25 watt with secondary lens luminaries IP 66, 5700K, with inbuilt surg diverter with 02 Years warranty with manufacturer's guarantee certificate complete with all accessories as directed by Engineer-in-Charge. Make:- Orient Cat Part No. LSFT-025-C-PC, Havells Cat Part No. ENDURAPEARLSL25WLED 757SASYTOPCMP or Crompton Cat Part No. TRP-400-25-57-SL-LM-NSR.

Taking down carefully and S&F new security light fittings LED 45 watt with secondary lens luminaries IP 66, 5700K, with inbuilt surg diverter and 05 years warranty with manufacturer's guarantee certificate complete with all accessories as directed by Engineer-in-Charge. Make:- Orient Cat Part No. LSFT-045-CT, Havells Cat Part No. ENDURAPEARLNEOSL45WLED 757PASYTOPC or Crompton Cat Part No. TRP-409-45-57-SL-NS-GL-NSG.

Taking down carefully and S&F new security light fittings suitable for LED 60 watt with lens and 05 years warranty with manufacturer's guarantee certificate complete with all accessories as directed by Engineer-in-Charge. Mare:- Orient Cat Part No. LSFT-060-CT, Havells Cat Part No. ENDURAPEARLNEOSL60WLED757 PASYTOPC or Crompton Cat Part No. TRP-409-60-57-SL-GL-NSG.

Taking down carefully and S&F new flood light fittings with manufacturer's guarantee certificate, suitable for LED 120 watt IP 66 with lens & all accessories, out door type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete all as specified and directed by Engineer-in-Charge. Make:- Orient Cat Part No. LFSMU-120-C, Havells Cat Part No. JETAIRISFLS 120WLED757APWBLT G or Crompton Cat Part No. LFLN-120-CDL/60-M.

Supply and fix in repairs, MCB single pole (SP), 6 to 32 Amps, 240 Volt 'B' curve 10 kA, IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area including copper lugs of suitable size complete all as specified and directed.

S&F in replacement, solar LED light 20 Watt, 2 days back up, all in one stand alone light without mounting pole all as specified and directed.

Bhardwaj Construction Co

VIJAY ENTERPRISES