SPL REPAIR OF BLDG NO H-1 NUR OFFR MESS OF MH AND PROVN OF FALSE CEILING IN MAIN OFFICE AT MDC UNDER GE(U) MEERUT CANTT

Amount

Dismantling plain or corrugated asbestos cement ( corrugated semi-corrugated etc) sheets in roof covering complete all as specified and directed.

Dismantling wall and ceiling boards ( fibre pulp insullation Etc) or insullation boards/ slabs blankets any thickness including cover fillets complete all as specified and directed.

Dismantling wrought iron or mild steel work of any desription not other wise provided complete all as specified and directed.

Demolition brickwork or stone work built in cement mortar including all quoins arches , pillers etc complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick ( AZ 150) of an colour having tensile strength of 550 Mpa as in roof covering / clading to wall fixed self tapping screws/ J or L type cranked hook bolts complete all as specified and directed.

All as per item No 5 above but plain sheet as in ridge complete all as specified and directed.

S&F MS wind tie for roof including securing bolt etc complete all as specified and directed.

M&L for providing cement concrete type B1, 1:2:4 ( 20 mm graded aggregate) in roof kerb or mud stops rounded or chemfered edge complete all as specified and directed.

S&F rolled sections as in main and cross beams , hip and jack rafters , purline where connected to common rafters and running rails and guides for sliding doors , fixed with angle cleats or other connecting plates conforming to Fe-410 Gde E-250 quality complete all as specified and directed.

S&F WPC wall clading /linning PVC moulded 10 mm thick fixed on 5 mm thick PVC grid 30 mm wide and 30 cm centre to centre in horizontely /vertically with nails /screwes all as per manufacture instruction direction ( as approved by GE) etc complete all as specified and directed.

Providing & fixing false ceiling 12 mm thick at all heights with GRG ( Glass Fibre Reinfored Gypsum) false ceiling tiles of size 595X595 mm of approved texture design and pattern having moisture content less than 2%, humidity resistance of 99%, NRCO .50 to 0.75 as per IS 8225: 1987 Non combustiles as per BS 476 ( Part 4) - 1970 and light reflactence of 85 % ( Minimum ) to be laid in true horizontal level suspended on interlocking metal T grid of hot dipped galvanised iron section of 0.33 mm thick ( galvanised @ 120 gram per Sqm including both side ) comprise of main T runners of size 15x32 mm of length 3000mm cross T of size 15X 32 mm of length 1200 mm and secondary intermediate cross - T of size 15X32mm of length 600mm to form grid moudule of size 600X600mm suspended from ceiling using galavanise mild steel items ( galavanising @ 80 gram per Sqm) i.e 50mm long , 8 mm outer dia M-6 dash fasterners, 6mm dia fully treaded hanger rod upto 1000mm length and L shape level adjuster of size 85X25X2 mm galvanised iron perimeter wall angle of size 24X24X0.40mm of length 3000 mm to be fixed on periferi wall / partition with the help of plastic rawal plugs at 450mm centre to centre and 40mm long dry wall wood screwes . The work shall be carried out as per specifiecation, drawing and as per direction by Engr-Incharge ( Make ; Diomond, /Saint gobain/Armstrong/Rajshree)

M&L for brick work with fly ash bricks ( old size) straight or curved in plan exc 6 m mean radius , built in CM 1:6 Complete all as specified and directed

Taking down cement plaster including raking out joint hacking for key scrubbing down with water complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on brick/ concrete surfaces of external walls finshed even and fair complete all as specified and directed.

M&L for 10 mm thick rendring in CM (1:6) on brick/ concrete surfaces of internal walls finshed even and fair a complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removing rubbish off the MD land complete all as specified and directed.

M&L for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub base of floors etc complete all as specified and directed.

M&L for light shade Vitrified Ceramic tiles high glossy finished 10 mm thick (square/ rectangular) polished, size of each tiles 600mmX1200mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:6 complete all as specified and directed

All as per item No 19 above but in skirting over and including 10 mm thick backing coat in cm 1:4 complete all as specified and directed.

M&L for desinger digital glazed ceramic coloured tiles of size 300mmX600mm , 7-8mm thick , on vertical surfaces such as dados skirting and risers to step etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and incuding 10mm thick renderingin CM 1:4 complete all as specified and directed.

M&L for non skid edge cut coloured ceramic tiles 7mm to 8mm thick square/rectangular area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:6 complete all as specified and directed.

M&L for preparation of new plastered/ unplastered surfaces of walls by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots, washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying two coat of distemper oil emulsion over and including putty 1 mm thick wall care putty of any tint/shade complete all as specified and directed.

M&L for complete removal of existong treatment of old surfaces of walls by scrapping down distempered and painted surfaces and distempering walls by applying two coat of distemper oil emulsion over and including of 1 mm thick wall care putty of any tint/shade complete all as specified.

M&L for applying two or more coats of 100% Premium external weatherproof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over and including 1mm thick wall care putty on new plastered surface. complete all as specified and directed.

Taking down Chowkats or frames not exc. 1.5 Sqm each, with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F factory made single extruded WPC (Wood polymer Composite) solid door /window and other frames / chowkhats of size 45X70mm comprising of vrgin PVC colour of K value 58-60 ( suspension grade ) calcium corbonate and natural fibre( wood powder /rice husk/white husk) and nn toxic additives ( max toxicity index of 12 for 100 gms ) fabricated with miter joints after appying PVC solvent cement and screwed with full budt treated star headed SS screwes having minimum frame density of 50 kg/Cum screwe withdrawal strength of 2200N ( Face) and 1100N ( Edge) minimum compressive strength 58N/mm2 , mouldes of elaticity 900N/mm2 and resistance to spread of frame of class A category with property and being termite /borer proof , water /moisture proof and fire retardant and fixed in position with MS hold fast/lugs SS dash fasteners of required dia and lenght complete all as specified and directed.

S&F Factory made single extruded WPC ( Wood Polymer Composit ) solid plain flush door shutter of 30 mm size comprising of vigin polymer of K value 58-60 ( suspension grade ) calcium corbonate and natural fibres ( wood powder /rice husk/wheate husk ) and non toxic additives ( Max toxicity index of 12 for 100 grams ) having minimum density of 650 Kg/Cum and crewe withdrawal strength of 1800N ( Face) and 900N ( Edge) minimum compressive strength 50N/mm2 , mouldes of elaticity 850N/mm2 and restance to spread of frame of class A category with property of being termite /borer proof , water /moisture proof and fire retardant and fixed with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S S screwesincluding door closer of desination No 2 complete all as specified and directed.

S&F brass body mortice lock length 100 mm with two levers ( vertical ) mild steel body and fixed complete all as specified and directed.

S&F 200mm size stainless steel handles, complete all as specified and directed.

S&F satinless tower bolt 200mm of size all as specified and directed.

Taking down Chowkats or frames exc. 1.5 Sqm but not exc 4.00 sqm each, with shutters (without taking off shutters from the frame). complete all as specified and directed.

S&F powder coated glazed window shutters, Three track (each shutter approx. half the size of opening with two Nos. glazed shutter and 1 No. wire gauged shutter including necessary jointing cleats for fixing etc, glazing clips, rubber packing, aluminium powder coated snap beading, screws, aluminium (powder coated ) fittings such as handle clips (suitable size), locking device, and glazing in panels with 5.0mm thick coloured/tinted glass and gauged with 0.36mm dia, 1.40mm aperture SS wire mesh using Aluminium Section Id 491, 4309, 4310, 8853, 8851, 9205 complete all as specified and shown in drg and as directed by Engineer-in-Charge. (In case of non-availability of any particular section, the highter section in terms of Kg/rm shall be provided without any extra cost to govt.

S&F aluminium powder coated sections windows double leaves, double shutter side hung/ top hung comprising glazed and gauged shutters with frame using aluminium powder coated extruded sections of size 101.60mmx38.10mm for frames, 47.62mmx44.45mm for stiles and rails of shutters having 1.25mm thickness, galzing with 5mm thick tinted sheet glass fixed with and including aluminium powder coated snap beadings, neoprene gaskets, shutters fixed to frame with with 75mm size stainless steel butt hinges -02 Nos per leaf, aluminium anodised extruded section 150mm long handle-01 Nos per leaf, aluminium anodised stay with hook and eye of suitable side -01 Nos per leaf, aluminium powder coated Tower bolts-02 Nos per leaf, stainless steel wire cloth of 0.36mm dia with 1.18mm width of aperture complete all as specified and directed.

S& F mild steel grill with 12 mm dia Square bar with ends of bars shouldered and /or riveted or forged into spikes fromed gourd bars , horizontely and 30X5 flat iron as in frame and fixed in window opening including butting and welded complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan single piecs (pedestal pattern), with vitreous china flushing cistern combined white including and jet sprey nozzle 1.00m long and wc white seat cover with hinge divice complete all as specified and directed.

Supply & fix 15 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including Taking up or down old GI steel tubing, etc complete all as specified & directed.

Supply&fix 20mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including taking up or down old GI steel tubing,etc complete all as specified & directed.

S&F in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & plug bolts,32 mm CP waste coupling complete all as specified and directed.

S&F as in repair 15 mm bore bib tap chromium plated, cast copper alloy, with crutch or butterfly handle, flange, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

Supply & fix in repairs PVC connections of 600mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply and fix in repairs PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

S&F in reipair CP towel rail brass 20mm dia 600mm long with bracket CP finish complete all as specified and directed.

Supply & fix in repairs steel C.P. grating 100 mm dia waste pipe hole fitted as required at site complete all as specified and directed.

S&F in repair 15 mm bore stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, complete all as specified & directed.

Dismantling of 100/110 cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as directed

S&F of 110mm dia UPVC ultra drain,SelFit pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors complete all as specified and directed.

S&F of UPVC bend equal of any radius without door, ISI marked, IS-14735, jointed with solvent cement for 110mm size pipes complete all as specified and directed.

Dismantling of 75 mm bore cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as directed

S&F of 75 mm dia UPVC ultra drain,SelFit pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors complete all as specified and directed.

S&F UPVC bend equal of any radius without door, ISI marked, IS-14735, jointed with solvent cement for 75 mm size pipes complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including connections and fixed in position complete all as specified and directed

S&F in repair 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repair sinks made of stainless steel 1 mm thick kitchen with plugs , washers and waste including bedding in cement mortar to draf wall or including fixing centilever brackets and connecting union pipes overall size 495mmX420mm bowl size 410mmX30mmX160mm complete all as specified and directed.

S&F in repairs chromium plated shower rose overhead single flow 100mm dia (ABS chrome plated) without Arm including fixed to 15 mm dia steel pipes or union and complete all as specified.

S&F in repair toilet paper holder stainless steel complete all as specified and directed.

S&F in repairs chromium plated mixing valve, wall mixer 3 in 1 system with provision for both telephone shower and overhead shower complete with wall flange with 115mm long bend pipe including three joints to steel pipe or unions complete all as specified and directed.

S&F in repairs chromium plated mixing valve (central hole basin mixer) with small spout without popup waste system with 450mm long braided hoses including three joints to steel pipe or unions complete all as specified and directed.

S&F in repairs chromium plated soap dish holder complete all as specified and directed..

S&F 500 litre capacity water tank rotational moulded polyethylene water storage tanks( cylindrical/vertical with closed top ) hoisted and fied in position all as specified and directed including 20 mm float vavle with aluminium rod complete and taking up or down existing water tanks complete all as specified and directed.

S&F in repairs 20/22mm dia fancy type SS 304 grade curtain rods with wall thickness not less than 1.25mm, fixed to walls with and including a pair of fancy type SS brackets and SS clamps best quality as approved by GE complete all as specified and as directed. (Note - Length of curtain rod shall be measured and paid for as one unit. Quoted rate is deemed to include for provision of a pair of brackets and clamps per unit length)

S&F in repairs for 20mm thick granite,(table rubbed and polished) for platforms, wall lining (veneering to wall), cills and in similar items laid over and including 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixutre of pigment to match with shade of granite external edges rounded.including dismantling of existing granite complete all as specified and directed.

M & L for 75 mm thick PCC type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for coloured Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 grade including 30 mm thick sand coushion concrete all as specified and directed

M&L for cement concrete in roof kerbs or muds stops rounded or chamfered type B1, 1:2:4 (using 20 mm graded stone aggregate ) complete all as specified and directed.

M&L for preparation of new steel surfaces of any description exc 10 cm girth and applying two coat of synthetic enamal paint over a coat of red oxide complete all as specified and directed.

M&L for preparation of new steel surfaces of any description n,exc 10 cm girthand applying two coat of synthetic enamal paint over a coat of red oxide complete all as specified and directed.

M&L preparation of old steel surfaces of any description exc 10 cm girth and applying one coat of synthetic enamal paint complete all as specified and directed.

M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre, intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffits at approx 900mm centre to centre with GI cleats, GI suspenders and steel expansion fasteners with and including ceiling section of 0.55mm thick having kurled web of 50mm and flange of 26mm each side with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

M&L 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately)

M&L for false ceiling corners with designed angular shape of size 100x100mm with POP fixed on 6mm thick fibre board with 20x20mm, 0.55mm thick galvanised sections fixed at intervals not more than 750mm and complete al as specified and directed by Engr-in-Charge.

M&L for preparation of ceiling surfaces and applying two coat of oil bound distemper over and including 2 mm thick wall care putty and one coat of primer complete all as secified and directed.

Supply and fix in repair 5mm thick insulated plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining,Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items will be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. to match with the adjoining surafces complete all as specified .

Material & labour for point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper stranded conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings.

One light /Tube/ fan point controlled by one, one way switch 05/06 Amps

One 3 Pin, 05 /06 Amps socket outlet point on indpendent board controlled by one, one way 5/06 Amps switch

One 3 Pin, 05 /06 Amps socket outlet point on same board controlled by one, one way 5/06 Amps switch

All as per serial item No 77 here in before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 /16 Amps socket outlet point on independent board with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated FRLS copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed

Supply & fixing switch piano flush type, 05/06 Amps single pole , one way 240 volts complete all as specified & directed

Supply & fixing switch piano flush type, 15 /16 Amps single ploe, one way 240 volts complete all as specified & directed .

Supply & fixing socket outlet 3 pin, 05/06 Amps (2 -in-1 Multipurpose) flush type 240 volts complete all as specified & directed.

Supply & fixing of socket outlet 3 pin, 15/16 Amps (2 -in-1 Multipurpose) flush type 240 volts complete all as specified & directed.

Supply & fixing ceiling fan regulator, electronic, type, rotary 0 to 04 steps, hum free, AC, 230 volts, 100 watts duty ISI Marked with and including modular white surround complete all as specified & directed.

Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting complete all as specified & directed

Supply & fixing of bell push, flush type 05/06 Amps, 240 volts complete all as specified & directed .

Supply & fixing of ceiling rose surface bakelite 65x 50mm three terminals complete all as specified & directed.

Supply & fixing bell, AC, 230 volts, single pole, ding dong type size compete all as specified & directed.

Supply & fixing Sheet Metal Enclosures vertical TPN distribution board with provision for & including 100 Amp MCCB TPN as incomer with necessary internal wiring, MCBs as outgoing , 4 way, 415 Volt, Double door for housing MCB's/Isolators and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing including taking down old unsv DB any size all as specified & directed.

M & L for sub main wiring with 4 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed FRLS copper conductor stranded cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core , PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed including taking out old u/s sub main wiring any size.

M & L for sub main wiring with 6 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed FRLS copper conductor stranded cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core , PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed including taking out old u/s sub main wiring any size.

S&F 10 watts Light emitting Diode (LED) tube light fitting wall mounting, indoor PC LED battens, Integrated type, AC 230-240V, 50 hz, with PMMA/PC diffuser, 2' long, easy to install, Efficiency:100 lumen/watt, Minimum 3.5 KV Voltage Surge Protection, Power factor > 0.9, making connections with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed.

S&F 20 watts Light emitting Diode (LED) tube light fitting wall mounting , indoor decorative aluminium extruded T5 LED battens, Integrated type, AC 230-240V, 50 hz, with PMMA/PC diffuser, 4' long, easy to install, Efficiency:100 lumen/watt, Minimum 3.5 KV Voltage Surge Protection, Power factor > 0.9, making connections with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed.

S&F LED Bulk Head Fitting 10 Watt housing made up corrosion resistant unbreakable PC with high quality diffuser for glare free Aesthetically designed gaskit IP65 protection, efficacy 95lm/watt complete all as specified and directed.

S&F decorative wall bracket light Fitting 10 Watt with bulb as per sample dcomplete all as specified and directed.

Supply & fixing MCB, SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing MCB, SPN, AC, 240 volts of 63 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed.

Taking down of existing unserviiceable Sheet metal enclosures (DB) complete and removing and S&F epoxy powder coated distribution box, SPN, 8 ways, 240 volts, IP-43 ,metal double door for MCB , grouted flush to walls including making good disturbed surafces of wall to match the adjoining surfaces complete all as specified and directed.

Taking down of existing unserviiceable Sheet metal enclosures (DB) complete and removing and Supply & fixing Sheet Metal Enclosures with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps capacity 240 volts 'B' series 10KA and making connections complete all as specified & directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified & directed.

Supply and fixing LED street light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply & Laying jointing, testing and commissioning LT XLPE, 35 Sqmm, 4 core. PVC insulated, PVC sheathed armoured LT 1100 volt grades heavy duty with aluminium stranded conductor through pipes, induct, on poles, in trenches etc complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes,pier holes, laying of pipe and cables etc. but not exceeding 10 sqm on plan including dressing/trimming sides and levelling/grading & ramming bottom of excavation and getting out in soft/loose soil complete all as specified.

Returning ,filling in, including spreading, levelling , watering and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified.

Removing excavated material (soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

M&L for burnt clay fly ash old size bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over electric cable for protection all as specified.

Material and labour for river sand, unwashed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . (Note:Punned thickness shall be measured for the purpose of payment)

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece completed all as specified and directed.

Material & labour point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed copper conductor FRLS cable in and including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc,alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor FRLS cable of 1.5 sqmm size through and including PVC conduit terminated in modular switch boards including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing for the following. [Note: - Modular switch boards shall be measured and paid separately rate for cutting chasis of walls all are included in the quated rate)

One light point or one fan point or bell point controlled by one switch or bell push

One 3 Pin, 05 /06 Amps socket outlet point on same board controlled by one, one way 5/06 Amps switch

S & F Modular Switch 1 way 6 A, 1 module

S & F Modular Socket 6 A, 2/3 pin combined 2 module

S & F Modular Fan step regulator, 120 watt, 2 module

S & F Modular Blank plate, 1 module

S & F Modular type White cover plate with frame 6 module

S & F Modular type White cover plate with frame 8 module

S & F Modular type Metal Flush box 6 module

S & F Modular type Metal Flush box 8 module

Supply and fixing in Recessed Mounted Round LED fitting of 18 watt Downlight Aesthetically designed Aluminum die-Cast Enclosures With separate replaceable Cinstant Current driver, CCT 6500k and ceiling cutout 205mm with efficiency of 100lumen/watt. This style yet eco-friendly panel is ideal for both false and concrete ceiling complete all specified and directed. Make:-HALONIX( Cat No. HLDLR-R27S-18-CW) / Bajaj (Cat No. BGSLO Sleek Recess RD 18W WH LED) / Eveready (Cat No. LEDDNR01816-01 18W)

S & F Recess mounted economical LED panel light 2`X2` 36 watt with high quality diffuser for uniform light with 100 lm/w housing of pressed aluminium sheeet with complete all as specified and directed.

Supply & fixing in replacement MCB, SPN, AC, 240 volts of 40 to 63 Amps capacity 10KA, 'c' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing MCB DB Box 8 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed.

Rajneesh Jain (BID ID -3108137)

M/S AGARWAL CONSTRUCTION CO. (BID ID -3109305)

SHAKTI CONSTRUCTION CO (BID ID -3096937)

YADAV CONSTRUCTION COMPANY (BID ID -3120243)

VIRAT CONSTRUCTIONS (BID ID -3122147)

SA construction co. (BID ID -3121672)