SPECIAL REPAIR TO ROAD INSIDE DEPOT AREA AND DEPOT PERIMETER AT 15 FAD JINDRAH UNDER GE (ARMY) DHAR ROAD

Amount

Material and labour for scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm, exc 50 mm and not exc 100 mm, including removing the material to a distance not exceeding 50 Mtrs and stacking complete all as specified and directed.

Material and labour for 150 mm thick in two layers of 75 mm thick each (compacted thickness) WBM with coarse aggregates (granite, trap or basalt) of grading 2 (63 to 40 mm size) or of grading 3 (50 to 20 mm size), spread rolled and consolidated to gradient and camber required including forming clay puddle bunds (retaining fillets) on both edges of spread aggregates with 8 to 12 tonne power roller complete all as specified and directed.

Material and labour for preparing of unsurfaced water bound macadam surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags or with mechanical air compressor to remove all loose dirt etc. and applying evenly a priming/tack coat with bituminous primer (paving bitumen VG-10) @ 10 Kg per 10 Sqm complete all as specified and as directed.

Material and labour for premix bituminous macadam laid/rolled with mechinal paver and material transported in tipped (covered) rolled with vibrating roller and compacted to required gradient and camber (consolidated thickness 75 mm or less) using binder content of paving bitumen (VG-30) by 4% weight of total mix, complete all as specified and directed.

Material and labour for applying evenly a priming/tack coat with bituminous primer (paving bitumen VG-10) @ 5 Kg per 10 Sqm on black top surface of bitumenous macadam complete all as specified and as directed.

Material and labour for bituminious premix semi-dense asphaltic concrete 40 mm (consolidated thickness) with paver with 5.5% binder content by weight of total mix (Paving bitumen VG-30) laid with mechanically paver and material transported in tipped (covered) rolled with vibrating roller and compacted to required camber and gradient with 8 to 12 tonne power roller complete all as specified and directed.

Surface dressing not exc 15cm deep in any type of soil for berms complete all as specified and directed.

Material and labour for moorum filling in pavings, laid in layers not exc. 15cm thick, spread, levelled and rammed to form uniform and consolidated surfaces with and including watering complete all as specified and directed.

s s construction

Sarbat Construction Co