Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹34.0 LAccepted-AOC | 1 | Accepted-AOC Being lowest and reasonable | |
| 2 | 2₹35.0 L+₹68,040.80 (1.98%)Rejected-Finance | 2 | Rejected-Finance Not being the lowest bidder | |
| 3 | 3₹40.9 L+₹6.5 L (19.0%)Rejected-Finance | 3 | Rejected-Finance Not being the lowest bidder | |
| 4 | 4₹41.6 L+₹7.2 L (21.0%)Rejected-Finance | 4 | Rejected-Finance Not being the lowest bidder | |
| 5 | 5₹41.9 L+₹7.5 L (21.9%)Rejected-Finance H NO 8 7 66 PLOT NO 76 VENTURE 2 HASTINAPURAM CENTRAL HYDERABAD 500 079 | HYDERABAD | HYDERABAD | TELANGANA | 500079 | 5 | Rejected-Finance Not being the lowest bidder |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
16 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R AND D RCI, HYDERABAD
GE(I) RND RCI, MILITARY ENGINEER SERVICES, VIGNYANAKANCHA, RCI, HYDERABAD
REPAIR MAINT OF EM INSTALLATIONS UNDER GE I RND RCI HYDERABAD
2023_MES_620331_1
8879
Open Tender
Civil Works
Item Rate
180 days
GE I R AND D RCI
MES enlisted Class D category a i and Un enlisted Meeting enlistment criteria of D class in MES and having no recovery pending. For further details ref NIT
8 documents required · 8 mandatory
₹500
Yes
GE I R AND D RCI, HYDERABAD
₹80,000
Yes
4 Dec 2023
25 Sept 2023
18 Oct 2023
25 Sept 2023
16 Oct 2023
9 Oct 2023
Amount
Taking down existing roof treatment including scrapping old bitumen layer complete of any description and removing of cement plaster including cleaning and disposal of debris off the premises complete all as directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete including disposal of debris at low laying areas as directed by Engr-In- Charge
M&L, PCC 1:2:4, type B-0 using 12.5mm graded stone aggregate as in padding concrete/levelling course, to maintain slopes on roof and finishing the surfaces even and fair mixed with integral water proofing chemical as per manufacturer's instructions including necessary formwork complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately
M&L, 10mm thick rendering in cement mortar 1:4 on concrete surfaces finished even and smooth without using extra cement mixed with integral water proofing chemical as per manufacturer's instructions complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately
M&L for water proofing treatment on existing cleaned RCC roof comprising with the following operation as specified here-in-below:- a) Applying evenly one coat of cold bituminous primer conforming to IS-3384-1986, @ 0.30 litre per square metre on the Cleaned Plastered Surfaces. b) Applying evenly one Coat of blown Hot Bitumen of Grade 85/25 @ 1.20 kilogram per square metre on primed surfaces. c) S&F standard APP modified membrane prefabricated 5 layer 3mm thick with non woven polyster matt centeral core of 160 gsm (mini) impregrnated and coated on both sides with layers of APP modified bitumen and finised with micro perforated heat fusiable polythene film on both surfaces .the weight of membrane shall not be less than 3.5kg/sqm and laid over primed surface by LPG/ butane torch, all as per manufacturers instructions.
M&L Plain cement concre tiles with grey cement and no pigment of size 25cm x 25cmx 22mm thick,m a c h i n epressed; set jointed andcement slurry in roof laid over screed bed of 15mm thick in cm 1:6 and pointed in neat cement slurry complete all as specified and as directed.
Supply only integral water proofing compound ISI marked approved quality
M & L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizantal faces of grooves with cement mortar in CM 1:3 and making good in CM 1:3 after inserting membrance in to the groove.
M & L, PCC 1:2:4 Type B1 (using 20 mm graded stone aggregate)as in roof kerbs or covering rounded or chamfered on edges all as specified.
Demolition of brickwork or stone masonry including all quoins, arches, pillars, etc., built in cement mortar complete all as directed.
M&L, brickwork with Flyash old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping etc, incl necessary formwork complete all as specified
Taking down cement plaster of any description on brick or stone walls from any height including racking out joints, hacking for key, scrubbing down with water etc. including removal of rubish off the premises, complete all as directed.
M&L, 10mm thick rendering in cement mortar 1:6, on fair faces of brick or concrete surfaces, in any height, finished even and smooth without using extra cement complete all as specified and directed.
M&L, 15mm thick rendering in cement mortar 1:4, on other than fair faces of brick or concrete surfaces, in any height, finished even and smooth without using extra cement complete all as specified and directed.
M&L applying Two Coats of Distemper Oil Emulsion over a coat of alkali resistant primer and applied over plastered surfaces complete all as specified and as directed.
Taking down chowkhat or frames (without taking off shutters from the frames) not exceeding 1.5Sqm complete all as directed.
Taking down chowkhat or frames (without taking off shutters from the frames) exceeding 1.5Sqm but not exceeding 4Sqm each complete all as directed.
Taking down shutters of any descriptions from the frames exc 1 Sqm but n exc 2 Sqm each complete al as directed. .
Taking down shutter of any description from the frame exc 2 Sqm each complete all as directed.
S&F, second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamferred put together with glue pinned at joints etc., complete all as specified and directed.
S&F, 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping complete all as specified and directed.
M&L, preparation new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F, in opening solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and as directed.
S&F, Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement all as specified and directed.
S&F in repairs, 300mm long aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
S&F 100mm long stainless steel butt hinges, medium weight complete all as specified and as directed.
S&F ,150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.
S&F, 150mm size, D Type extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.
Demolition of PCC in ground floors and paving's not exceeding 15cm thickness (below or above ground level) complete including disposal of debris off the premises all as directed by Engineer in Charge.
M&L PCC 1 : 3 : 6 type C1, 75 mm thick ( by using 20mm graded stone aggregate) for plinth pretection finishing even and smooth without using extra cement all as specified and directed..
M&L, 75mm thick PCC 1:4:8 type D-2 in sub base using 20mm graded stone aggregate finishing the surface even and rough including necessary formwork complete all as specified and directed
M&L, 50mm sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L, 60mm thick, M-35 Grade, machine pressed precast concrete interlocking coloured paver block any shape and size conforming to IS 15658-2006 laid over 50mm thick crushed stone sand filling including watering and consolidation complete all as specified and directed.
M&L, 25mm thick chequered cement concrete tiles of 200mm x 200mm size with grey cement and pigments, set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M&L, 100mm thick PCC 1:2:4 type B-1 in flooring using 20mm graded stone aggregate finishing the surface even and smooth without using extra cement including necessary formwork complete all as specified and directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises all as specified and directed.
M&L, 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring, finishing the surface even and smooth using extra cement including necessary formwork complete all as specified and directed.
M&L, 7 to 8mm thick coloured, joint free Non skid ceramic tiles of size 300 x 300mm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in cement mortar 1:4 complete all as specified and as directed.
M&L, non skid cermic tiles 7 to 8mm thick coloured, joint free Non skid ceramic tiles area of each tiles exc 0.18 sqm and not exceeding 0.38 sqm each , in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in cement mortar 1:4 complete all as specified and as directed. Note : Design of tiles shall be as approved by GE.
M&L, coloured glazed ceramic tiles of size300x200mm/ 300 x 450mm, 6 to 7mm thick in dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed. Note: Design of tiles shall be as approved by GE
M&L, 20mm thick, approved pre polished Granite work (of any type, table rubbed and polished) edges rounded in steps, cooking platform and the like laid over and including screed bed or bedding layer 15mm thick in cement mortar 1:4, pointing with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone complete all as specified and directed.
M&L, 18 to 20mm thick machine cut coloured granite, factory polished, in wall lining, (veneering to wall) over 12mm thick backing coat in cement mortar 1:3 and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed
S&F in repairs, vitreous china wash hand basin white 550 x 400mm of size including cutting for and pinning in ends of brackets or erecting stand including brackets, PVC waste pipe and coupling of 32mm bore complete all as directed
S&F in repairs, vitreous china wash down water closet pan (pedestal pattern), white including connecting to trap and to flushing pipe, anti syphonage pipe etc., complete including fixing to floor with bolts, including provision of plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.
S&F in repairs, vitreous china squatting pan, ‘Orissa’ pattern of size 580 x 440mm, white, with integral foot rests, including connection to trap, and to flushing pipe, antisyphonage pipe, etc., complete including provision of cement concrete bedding in 1:5:10 and making good to floor complete all as specified and directed.
S&F in repairs, vitreous china Urinal, half stall type, white, including , providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing grating and union for discharge pipe etc., chromium plated urinal spreader waste coupling of PTMT (half or full threaded) with 32 mm bore dia of discharge pipe (minimum weight shall be 45 gms) complete all as specified and directed.
S&F in repairs, waste coupling of PTMT (half or full threaded) (Minimum weight 45grams), 32mm bore dia of discharge pipe complete all as specified and directed.
S&F in repairs, PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.
M&L in repairs, PVC floor trap, 100mm (diameter of outlet) with grating including jointing to waste pipe fixed in PCC 1:2:4 type B-1 using 20mm graded stone aggregate complete all as specified.
S&F in repairs, 10 litres, PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.
S&F in repairs, 500 litres capacity triple layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including connecting up of existing inlet and outlet pipes and ball valve complete all as specified and as directed.
All as per item No 53 above but 1000litres capacity.
S&F , 20mm bore premium PTMT Ball valves, high pressure, with epoxy coated aluminium rod and high density plastic ball and fly nut complete, screwed for iron/GI pipe or brass ferrule complete all as specified and directed. Make:Prayag CAT No152 or equivalent as approved by GE
S&F in , 25mm bore premium PTMT Ball valves, high pressure, with epoxy coated aluminium rod and high density plastic ball and fly nut complete, screwed for iron/GI pipe or brass ferrule complete all as specified and directed. Make:Prayag CAT No153 or equivalent as approved by GE
S&F in repairs, 15mm bore bib taps, fancy type, chromium plated cast copper alloy with crutch or butterfly handle, fancy type, screwed down, screwed for iron/GI pipe or for brass ferrule complete all as specified and directed.
S&F in repairs, 15mm bore Pillar taps fancy type , cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs, 15mm bore angular stop valve, fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron/GI pipe or for union complete all as specified and directed.
S&F in repairs, 20mm dia Gun metal, globe or gate valves with iron wheel head, ISI marked screwed both ends for iron/GI pipe and fixed complete all as specified and as directed.
All as per item No 60 above but 25mm globe or gate valve.
S&F in repairs, 15mm bore steel water tubing, medium grade, ISI marked, galvanized, including all fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., aid in trenches or fixed to walls and ceilings or concealed in walls, ducts/ceilings or laid in floors complete including taking down old unserviceable tubing all as specified and directed.
All as per item No 62 above but 20mm bore of pipe.
All as per item No 62 above but 25mm bore of pipe.
Taking down rainwater pipes (any size or pattern) fixed to walls, including all fittings, heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories), complete all as directed.
S&F , 75mm dia PVC(SWR) pipes, ISI marked, single socketed in any length with rubber ring joints fixed to walls with PVC clamps as rain water pipe complete all as specified and as directed.
S&F , 110mm dia PVC(SWR) pipes, ISI marked, single socketed in any length with rubber ring joints fixed to walls with PVC clamps as rain water pipe complete all as specified and as directed.
S&F, 75mm bore PVC(SWR) bends any radius with access door complete all as specified and as directed.
S&F, 110mm bore PVC(SWR) bends any radius with access door complete all as specified and as directed.
S&F Powder coated aluminium frame for doors,windows, ventilators with one or morerebates including joining cleat forfixing etc. complete all as specified
S &F Powder coated aluminium(minimum thickness of powdercoating 50 micron) work for doors,windows, ventilators andpartitions (Fixed portions) withextruded built up standardtubular sections/ appropriate Zsections and other sections ofapproved make conforming to IS:733 and IS:1285, fixing with dashfasteners of required dia and size,including necessary filling up thegaps at junctions, i.e. at top,bottom and sides with requiredEPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitredand jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainlesssteel screws, complete all as directed .
S&F in repairs , 3mm thick sheet glass, plain, ordinary quality and glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified and as directed.
S&F in repairs, 4mm thick sheet glass, plain, ordinary quality and glazing with oil putty in square exceeding 0.5sqm in each pane complete all as specified and as directed.
S&F 12mm thick prelaminated particle board, interior grade,prelaminated oneside with decorative choice lamination &other side balancing white lamination,fixed with screws totimber frame work
M&L, preparation of old plastered surfaces of walls and ceilings surfaces including cornices etc., and applying two coat of oil bound distemper complete all as specified and directed.
M&L complete removal of existing treatment on wall surface and applying two coats of cement base paint over a coat of cement primer complte all as specified
M&L, preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L, preparation of old painted steel surfaces of any description, over 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L, Writing letters or figures (Block Roman, Italic or Indian) not exceeding 30cm high using synthetic enamel paint of approved tint complete all as directed.
S&F in repairs for Steel rolling shutters as in thicknes of laths in mm 1.25mm, without ball bearing, as specified incluidng top cover, anchring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete incl taking down old all as specified and directed by EIC.
S&F for Steel rolling shutters Ball bearing for rolling shutters all as specified and directed by EIC.
M&L preparation of new surfaces of steel over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of primer.
Taking down existing mild steel shaft 125 to 150mm and 4mm thick providing new shaft, class 'C' including necessary cutting, welding, drilling holes and refixing the bearing and other mounting accessories for rolling shutters of any size complete all as specified and directed.
S&F Mild steel plates, plain orchequered, 5mm thick or over in available sections grade FE 410.-W grade
M&L Providing pre cast cement concrete 1:2:4 type B1 (unsing 20mm graded stone agg ) in duct slab, cable pit slabs ect including set and jointed in cm 1:4 complete all as specified and as directed .
Mild steel bars 10mmdia and over TMT bars , cut tolength, bent to shaperequired, includingcranking, bendingspirally for hoopingends and binding
S&F in repairs of steel structure/frame made of MS box/pipe sections ERW or induction butt weld tubes conforming to IS-1161-1979 grade st 240 as in columns,purlins and truss complete fitting as directed including one shop coat of red oxide primer and two coats of synthetic enamel paint complete all as directed.
S&Fin repairs Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified.
Sneha Associates
Venkat Sai Enterprises
SRI SAI ENTERPRISES
M/s ANUSHA ENTERPRISES
S Anjan Reddy
sri vishnu enterprises
ELEVATORS MAINTENANCE ENGINEER WORKS
M/S SARASWATHI CONSTRUCTIONS
SUN LIGHT HOUSE
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .