Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.7 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹18.8 L+₹99,650 (5.61%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹19.9 L+₹2.1 L (12.0%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹21.5 L+₹3.7 L (20.8%)Rejected-Finance 207 GARIWAN TOLA ALLAHABAD | PRAYAGRAJ | UTTAR PRADESH | 211003 | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹23.9 L+₹6.1 L (34.4%)Rejected-Finance 11 1 7 P D KYDGANJ PRAYAGRAJ U P PIN 211003 | PRAYAGRAJ | UTTAR PRADESH | 211003 | L5 | Rejected-Finance Being L5 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
6 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Prayagraj
Stanley Road, Teliyarganj, Prayagraj
SMART PERIODICAL SERVICES WORKS IN THE AREA OF ZONE A AND D AT OLD CANTT PRAYAGRAJ.
2023_MES_595450_1
8635/E8
Open Tender
Civil Works
Item Rate
270 days
Prayagraj
AS Per NIT
8 documents required · 8 mandatory
₹500
GE (East) Allahabad
₹80,000
Yes
20 Jun 2023
15 May 2023
8 Jun 2023
15 May 2023
6 Jun 2023
30 May 2023
Amount
Complete removal of existing treatment by scrapping with machnical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. complete all as specifeid and directed.
M & L for waterproof cement based putty @ 1Kg (undiluted) per sqm of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface oven and smooth complete and sanding of the putty surface with mechanica wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make thhe surface free from dust etc. by skilled labour as per following steps :- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 Kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum presure 3300 PSI
M & L for preparation of new plastered surfaces of walls and applying two coats of acrylic emulsion paint using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and pint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed Note :- sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacurer
M&L for preparition of old decorated plastered surfaces of celling and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old decorated plastered surfaces of wall and applying one coat white wash complete all as specified and directed
M&L for complete removal of existing treatment from wall surfaces and applying two coat of oil bound distemper on walls over 1 mm thick wall care putty complete all as specified and directed.
M&L for preparatin of old decorated plastered surfaces of wall and applying one coat of oil bound distemper (approved colour/ shade) complete all as specified and directed.
M&L for preparation of old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synnthetic enamel paint complete all as specified and directed.
M & L for preparation of old painted steel surfaces of any description, not otherwise described over 10 cm in width or girth and applying one coat of white/ approved colour/shade synthetic enamel paint complete
M & L for preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint of approved colour, complete all as specified and directed.
M & L for preparation of old decorated plastered surfaces of walls and applying one coat of exterior weather proof paint of approved colour, complete all as specified and directed.
M & L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, filling depressions of scrapped surfaces with wall care putty and applying uniform layer of 1mm thick wall care putty including preparation of surfaces by rubbing with appropriate size of sand or emery paper and applying two coats of exterior weather proof paint over a coat of primer on walls surface, complete all as specified and directed.
M & L for preparation of old wooden surfaces of any description and girth and treated with creosote oil, complete all as specified and directed.
M & L for re-writing of letters or figures (Block, Roman, Italic or Indian) with fluorescent paint height of letter exceeding 75mm but not exceeding 300mm & width of letter exceeding 10mm but not exceeding 20mm wide, complete all as specified & directed.
M&L for preparing old decorated plastered surfaces of wall and applying one coat of plastic emulsion paint (approved colour/ shade) complete all as specified and directed.
M&L for complete removal of existing treatment from wall surfaces and applying two coat of plastic emulsion paint on walls over 1 mm thick wall care putty including complete removal of existing treatment complete all as specified and directed.
Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc including removing rubbish off from the premises complete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces, complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work in CM in 1:4 finished even and fair and mixing with water proofing liquid as per manufacturer instruction external surface complete all as specified and directed. Note : WPC shall be measured and paid separately.
Supply only Liquid water proofing compound complete all as specified and directed.
M & L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even complete all as specified and directed.
M&L for preparing new plastered surfaces and applying two coats of oil bound distemper over 1 mm thick wall care putty complete all as specified and directed.
M&L for applying two coats of cement base paint over one coat of cement primer on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.
M&L for preparing new plastered or unplastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal or wooden frame, glazed with putty or fixed with beads complete all as specified and directed.
S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in Sqm n.exc 0.50 Sqm in each pane complete all as specified and directed.
S&F 4 mm thick frosted sheet glass ordinary quality and glazing with oil putty in Sqm n.exc 0.50 Sqm in each pane complete all as specified and directed.
S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in Sqm .exc 0.50 Sqm in each pane complete all as specified and directed.
S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc complete all as specified and directed.
S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc complete all as specified and directed.
S&F 110mm PVC (SWR) bends with access door complete all as specified and directed.
S&F 110mm PVC (SWR) bends any radius complete all as specified and directed.
S&F 75mm PVC (SWR) bends any radius complete all as specified and directed.
S&F 75mm PVC (SWR) bends any radius with acess door complete all as specified and directed.
S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with acess door complete all as specified and directed.
S&F 110mm PVC (SWR) vent cowl complete all as specified and directed.
S&F in repair stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 100mm bore pipe complete all as specified and directed.
S&F in repair stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 75mm bore pipe complete all as specified and directed.
M&L for brick work with old size fly ash bricks straight or curved on plan to any radius half brick thick wall built in CM (1: 4) complete all as specified and directed.
M&L for brick work with old size fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1: 6 complete all as specified and directed.
Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.
KRISHNA BAHADUR
AMARDEEP ENTERPRISES
Ram Babu Bros
M/S Akhilesh Enterprises
ms shanti sons
SK ENTERPRISES
Mohit Enterprises
DINESH ELECTRICALS
creative construction co.
vs construction
Shivam Constructions
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .