REPAIR / MAINT TO ELECTRIC SUPPLY AND CONNECTED WORKS AT AF STN

Amount

Taking down carefully copper/Aluminium point wiring (Light,fan,socket or power) complete including fitting such as switches, socket, bell pushes, ceiling roses, pendants/batten holder, call bell, regulators etc all as specified and directed.

M&L for Point wiring for one light/fan point controlled by one, one way switch by using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including PVC concealed conduits and conduit accessories/fittings, pressed steel terminal switch boxes, 3 mm thick Bakelite sheet top cover (ISI Marked) fitted with Chromium plate brass screws washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire and connecting to earth dolly and make wall surface as existing same colour including taking down carefully aluminium conductor point wiring (light, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately)and making good disturbed surfaces of walls, floors, etc. to match with the existing good disturbed surfaces of walls, floors etc. match with the existing ,complete all as specified and as directed by Engineer-in- Charge. Note : (a) wiring shall be done by using proper colour coding.

All as per Sl item no.2 above but for one socket outlet point 5 amps on independent board controlled by one, one way switch.

All as per Sl item no.2 but for one socket outlet point 5 amps on same board with other switches.

M&L for Point wiring for 15 amps socket point controlled by one, one way switch using 2.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated FRLS unsheathed cables in and including PVC concealed conduit and conduit fittings including pressed steel terminal switch boxes and 3 mm thick plate for fixing of switches/sockets and fitted with Chromium plated brass screws & washers and 2.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated unsheathed earth wire and connected to earth dolly including taking down carefully aluminium conductor point wiring (light, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. to match with the existing good disturbed surfaces of walls, floors etc. match with the existing ,complete all as specified and as directed by Engineer-in- Charge. Note : (a) wiring shall be done by using proper colour coding.

S&F Switch piano flush type , SP,5/6 Amps, one way ,complete all as specified and as directed by Engineer-in- Charge.

S&F Bell push, flush type 5 Amps One Way 230 volts ,complete all as specified and as directed by Engineer-in- Charge.

S&F Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal controlled by one switch ,complete all as specified and as directed by Engineer-in- Charge.

S&F Socket out let 2 in 1 socket 3 pin , 6 & 16 Amps flush type controlled by one switch ,complete all as specified and as directed by Engineer-in- Charge.

S&F Socket out let 2 in 1 socket 3 pin , 6 Amps flush type controlled by one switch ,complete all as specified and as directed by Engineer-in- Charge.

S&F Switch piano, flush type single pole, one way 15 Amp one way ,complete all as specified and as directed by Engineer-in- Charge.

S&F Ceiling rose 3 terminal size 50x65mm surface type 230 volts ,complete all as specified and as directed by Engineer-in- Charge.

S&F Lamp Holder insulated body with back plate for batten fitting suitable for LED lamp complete all as specified and directed by Engineer-in-Charge.

S&F Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. and including taking down of old unserviceable light fitting, complete all as specified and directed by Engineer-in-Charge.

S&F LED Adore Lamp 9/10W, B22 base 6500K CDL type ,complete all as specified and directed by Engineer-in-Charge.

M&L for Sub main wiring with two single core 2.5 Sqmm FRLS PVC insulated and unsheathed 1100 volts grade cables with stranded copper conductor cable drawn through in and including PVC casing caping and accessories including one single core 2.5 Sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dully complete in and including taking down of old unservicable sub main wiring, complete all as specified and directed by Engineer-in-Charge. Note : (i) 2 run of 2.5 Sqmm ,1 run of PVC casing caping & 1 run of 2.5 Sqmm earth cable will be measured as single run. (ii) Extra length of cables/wire required for connection to MCBs shall not be measured and paid separetly the rate quoted by contractor per unit shall be deemed to be included in the quoted rate of this item.

Sub main wiring with two single core 4 Sqmm FRLS PVC insulated and unsheathed 1100 volts grade cables with stranded copper conductor cable drawn through in and including PVC casing caping and accessories including one single core 4 Sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dully complete in and including taking down of old unservicable sub main wiring, complete all as specified and directed by Engineer-in-Charge. Note : (i) 2 run of 4 Sqmm ,1 run of PVC casing caping & 1 run of 4 Sqmm earth cable will be measured as single run. (ii) Extra length of cables/wire required for connection to MCBs shall not be measured and paid separetly the rate quoted by contractor per unit shall be deemed to be included in the quoted rate of this item.

M&L for Sub main wiring with two single core 6 Sqmm FRLS PVC insulated and unsheathed 1100 volts grade cables with stranded copper conductor cable drawn through in and including PVC casing caping and accessories including one single core 6 Sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dully complete in and including taking down of old unservicable sub main wiring, complete all as specified and directed by Engineer-in-Charge. Note : (i) 2 run of 6 Sqmm ,1 run of PVC casing caping & 1 run of 6 Sqmm earth cable will be measured as single run. (ii) Extra length of cables/wire required for connection to MCBs shall not be measured and paid separetly the rate quoted by contractor per unit shall be deemed to be included in the quoted rate of this item.

S&F MCB SPN, 32 Amps, 240 Volts ,10 KA to be housed in DBs Proper and suitable size cable lugs to be fixed with MCBs as in replacment ,complete all as specified and directed by Engineer-in- Charge.

S&F MCB SP, 6 to 32 Amps, ,240 Volts ,10 KA to be housed in DBs of Proper and suitable size cable lugs to be fixed with MCBs ,complete all as specified and directed by Engineer-in- Charge.

Taking down old unserviceable main switches/ Distribution board any type including fuses MCB etc after removing all connection and making good the disturb surface all as directed by Engineer-in-charge.

M&L for Distribution box Double door type , SPN 8 way,with 200 amps rated bus bar, 240 Volts for MCBs, grouted flush to walls complete with IP 43 and metal double door ,epoxy powder coated in and including taking down of old unservicable main switches /Distribution board including fuses MCBs after removing all connection and making good the disturb surfaces ,complete all as specified and as directed by Engineer-in- Charge.

M&L for Distribution box Double door type , SPN 4 way,with 200 amps rated bus bar, 240 Volts for MCBs, grouted flush to walls complete with IP 43 and metal double door ,epoxy powder coatedin and including taking down of old unservicable main switches /Distribution board including fuses MCBs after removing all connection and making good the disturb surfaces ,complete all as specified and as directed by Engineer-in- Charge.

M&L for Distribution box Double door type , TPN 4 way,with required rated bus bar, 415/430 Volts for MCBs, grouted flush to walls complete with IP 43 and metal double door ,epoxy powder coated in and including taking down of old unservicable main switches /Distribution board including fuses MCBs after removing all connection and making good the disturb surfaces ,complete all as specified and as directed by Engineer-in- Charge.

S&F MCB TPN, 63 Amps, 415 Volts ,50 Hz ,25 KA to be housed in DBs Proper and suitable size cable lugs to be fixed with MCBs as in replacment ,complete all as specified and directed by Engineer-in- Charge.

S&F Energy saving new generation Endura Rugby Neo - IP65, 10W LED IP65 bulkhead luminaire with opal diffuser, etc complete with all accessories rewired electrically connected in and including taking down of old unservicable fitting, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED 2x2 Fitting luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete and including taking down of old unservicable fitting, complete all as specified and directed by Engineer-in-Charge. Make - Havells/Bajaj.

S&F Moduler switch 1 way 6A, 1 modules square white mechanisms as in replacement,complete all as specified and as directed by Engineer-in- Charge.

S&F Moduler switch 1 way 16A, 1 modules square white mechanisms as in replacement,complete all as specified and as directed by Engineer-in- Charge.

S&F Moduler socket 6 Amps, 2/3 Pin combined, 2 module as in replacement,complete all as specified and as directed by Engineer-in- Charge.

S&F Moduler socket 6/16 Amps, 2/3 Pin combined, 2 module as in replacement,complete all as specified and as directed by Engineer-in- Charge.

S&F Modular White cover plate with frame, 2 module complete all as specified and as directed by Engineer-in- Charge.

S&F Modular White cover plate with frame, 4 module complete all as specified and as directed by Engineer-in- Charge.

S&F Modular White cover plate with frame, 8 module complete all as specified and as directed by Engineer-in- Charge.

Earthing complete with Galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to G I earth strip 4 dia G I wire by means of brass bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 40 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, pit cover of precast RCC (1:2:4), type B-1, reinforced XPM of weight not less than 4 kg/ Sq.m and MS frame etc. including taking down of old unserviceable earthing, complete all as specified and as directed by Engineer-in-Charge. Note :- (i) The unit rate includes earth lead and protection pipe up to maximum 7.5 metre from earth plate to earth point/test point. (ii) Earth pit shall be constructed minimum 0.5 metre away from earth.

Supply only trolley suitable for DG set upto 250 KVA with double tyre of size 7.5 to 16 alongwith with rim on both side Trolley should be made from MS channel angle iron, flat etc of suitable size to hold the weight of 6000Kgs Single axle of suitable size should be provided alongwith hub as per the tyre size alongwith studs and nuts. Platform of MS sheet should be provided on the chassis with size of sheet not less than 10mm thick. The platform should be properly rivitted bolted along with chassis. The trolley should be enclosed from all sides with wire mesh of size 25mmX25mm with size of wire 4mm dia fixed with angle iron frame of size 50x50mm shall be connected to the platform with nut and bolts so that it can be disconnected as per the requirement. Entry/ Exit gate shall be provided on both sides of trolley wire, proper hinges welded throughout the length and alongwith proper locking arrangement. Toe hook and stand should be provided in front of the trolley for toing and placing the trolley at the desired location. The stoppers 4Nos made of MS sheet shall be provided alongwith trolley and brackets shall be provided alongwith trolley for placing stoppers at botjh sides. complete with all accessories and arrangements all as directed by Engr-in-charge.

M/s Ex Servicemen B.S Security Agency (BID ID -3412698)

Sona Enterprises (BID ID -3413117)

M/S ADHISH ENGINEERS (BID ID -3419789)

shivom builders (BID ID -3414254)

SUMEET TRADING CORPORATION (BID ID -3414590)